CGDVP1103Inductive Card Reader

Panel Reader VP1103 Manual article number 5277078 October 2010 / Manual version 1.1 Service manual For installation, operation and service VP1103-200PM-00GB-Panel reader Manual version 1.1 Preface This manual describes the installation, operation, troubleshooting and maintenance of the Panel reader. Read this manual entirely and when installing, carefully follow the instructions step by step as described in the manual. Pictograms Please pay extra attention here. This pictogram indicates an important subject. Version overview Manual version 1.0 / May 2010 First release. Manual version 1.1 / October 2010 Wiring adjustment. This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., AGRI P.O. Box 104 NL-7140 AC GROENLO The Netherlands VP1103-200PM-00GB-Panel reader Manual version 1.1 Table of contents Preface and Version overview Table of contents 1. Introduction .........................................................................................................................1 1.1. Description ............................................................................................................................1 1.2. Functioning............................................................................................................................2 2. Installing the VP1103 Panel reader ...................................................................................3 2.1. Mounting the VP1103 Panel reader......................................................................................3 2.2. Connecting to a PC or a weight scale via RS232 .................................................................4 2.2.1. Connecting RS232 via a Sub-D connector ..............................................................4 2.2.2. Connecting RS232 via a Velos Panel reader cable.................................................4 2.3. Connecting to a Velos VPU via CAN communication...........................................................5 2.3.1. Connecting one VP1103 Panel reader ....................................................................5 2.3.2. Connecting several VP1103 Panel readers to a Velos VPU ...................................6 3. Starting up operation..........................................................................................................7 3.1. Turn on the power .................................................................................................................7 3.2. Checking the VP1103 Panel reader .....................................................................................7 3.2.1. Checking the CAN communication with an VPU .....................................................7 3.2.2. Checking the RS232 connection to a PC ................................................................7 4. Maintenance, malfunction and disposal...........................................................................8 4.1. Maintenance..........................................................................................................................8 4.2. Malfunction............................................................................................................................8 4.3. Disposal ................................................................................................................................8 Appendix A Technical specifications....................................................................................9 Appendix B Corridor requirements .....................................................................................10 VP1103-200PM-00GB-Panel reader Manual version 1.1 / Page 1 1. Introduction The VP1103 Panel reader identifies RFID ear tags attached to individual animals. The identification can be used for registration of the animals that have passed the Panel reader unit (VP1103). A weight scale can optionally be connected to the Panel reader. This device complies with Part 15 of the FCC Rules and to RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1.1. Description The VP1103 Panel reader system consists of a Panel reader unit that is connected to a VPU using CAN communication or a connection to a PC or a weight scale through RS232. 1. Panel reader unit VP1103 2. Power supply VP2001 and VPU VP8001 3. Optional PC 4. Optional Weight scale 5. Optional Router and switch 6. Internet 7. RS232 connection 8. CAN communication 9. LAN connection via UTP cat5 cable Figure 1. Overview VP1103 Panel reader system 9 8 7 3 1 Weight scale 4 OR 1 5 6 3 3 OR 2 VPU VP2001 OR VP1103-200PM-00GB-Panel reader Manual version 1.1 / Page 2 1.2. Functioning The VP1103 Panel reader creates a magnetic field around the antenna that is used to identify the tags on ISO frequency 134.2 kHz. The Panel reader is connected to a VPU using CAN communication or to a PC or a weight scale through RS232. The Panel reader identifies animals that pass the Panel reader unit. When an animal is identified by the Panel reader, the tag number will be dumped. 1. VP1103 Panel reader unit 2. Responder number (animal identification) 3. Tag number dump Figure 2. Connection between the Panel reader and the dumped tag numbers The tag numbers are stored via CAN communication in the VPU or dumped according to the ISO protocol 11784/11785 via an RS232 connection in e.g. the Windows Hyper Terminal communication program. 3 2 1 VP1103-200PM-00GB-Panel reader Man…

Text truncated - open the document above for the full version.

Return address: PO Box 6, 7140 AA Groenlo, The Netherlands ATCB Attn.: Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Groenlo, 19 December 2011 Subject: Request of Confidentiality FCC ID: CGDVP1103 Dear Mrs. Bosley, Pursuant to section 0.457(d)(2)(i) and Section 0.459 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID : CGDVP1103 Brand : Nedap Models : VP1103 with integral antenna to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than N.V. Nederlandsche Apparatenfabriek "NEDAP" and TÜV Rheinland Electronic Products & Services (EPS) B.V.: 1. Bill of materials 2. Circuit diagram 3. Block diagram 4. Theory of operation (technical description) The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, N.V. Nederlandsche Apparatenfebriek “Nedap” Jacques Hulshof Approbation Management

Groenlo, 19 December 2011 Antenna information Description : 134.2 kHz Inductive RFID Card Reader FCC ID : CGDVP1103 IC : 1444A-VP1103 Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : VP1103 with integral antenna Antenna Type : Inductive O-Antenna Material : Copper Wire Number of turns : 2 Wire thickness : H-F Lize wire 120x0.1 mm Dimensions : 370x570 mm See the diagram below. Jacques Hulshof 370 mm 570 mm

Page 1 of 5 Inductive RFID Proximity Card Reader operating on 134.2 kHz Brand Nedap Model VP1103 Exterior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 2 of 5 Description of item Description of EUT : Inductive RFID Proximity Card Reader operating on 134.2 kHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Models : VP1103 FCC ID CGDVP1103 IC 1444A-VP1103 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 19 December 2011 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 3 of 5 Table of contents 1 TOTAL OVERVIEW OF THE VP1103 ................................................................................................................................. 4 2 BACK SIDE OF THE VP1103 ENCLOSURE ....................................................................................................................... 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 4 of 5 1 Total overview of the VP1103 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 5 of 5 2 Back side of the VP1103 enclosure

Page 1 of 6 Inductive RFID Proximity Card Reader operating on 134.2 kHz Brand Nedap Model VP1103 Label Location and artwork Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 2 of 6 Description of item Description of EUT : Inductive RFID Proximity Card Reader operating on 134.2 kHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : VP1103 FCC ID CGDVP1103 IC 1444A-VP1103 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 19 December 2011 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 3 of 6 Table of contents 1 LABELING OF THE PRODUCT ...........................................................................ERROR! BOOKMARK NOT DEFINED. 1.1 LOCATION OF THE LABELS ................................................................................................................................................... 4 1.2 FRONT SIDE OF THE VP1103 ........................................................................................ ERROR! BOOKMARK NOT DEFINED. 2 COMPLIANCE - OR WARNING STATEMENT ON THE VP1103 .................................................................................. 5 3 LABELING OF THE VP1103 .................................................................................................................................................. 5 4 ARTWORK ............................................................................................................................................................................... 6 4.1 ARTWORK OF THE COMPLIANCE STATEMENT ....................................................................................................................... 6 4.2 ARTWORK OF THE VP1004 GEA LABEL............................................................................................................................... 6 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 4 of 6 1 Label location VP1103 Model, IC and FCC ID Compliance statement Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 5 of 6 2 Compliance - or Warning Statement on the VP1103 3 Labeling of the VP1103 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive RFID Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 6 of 6 4 Artwork 4.1 Artwork of the compliance statement 4.2 Artwork of the VP1103

Page 1 of 6 Inductive RFID Proximity Card Reader operating on 134.2 kHz Brand Nedap Model VP1103 Interior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 2 of 6 Description of item Description of EUT : Inductive RFID Proximity Card Reader operating on 134.2 kHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Models : VP1103 FCC ID CGDVP1103 IC 1444A-VP1103 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 19 December 2011 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 3 of 6 Table of contents 1 FRONT SIDE OF THE VP1004 ENCLOSURE ..................................................................................................................... 4 2 INTERNAL COMPONENTS .................................................................................................................................................. 4 2.1 PHOTO TAKEN FROM THE FRONT SIDE NOT POTTED ELECTRONICS ........................................................................................ 4 2.2 DETAILED PHOTO OF THE ELECTRONICS ............................................................................................................................... 5 3 THE TRANSMITTER RECEIVER MODULE ..................................................................................................................... 5 3.1 FRONT SIDE TOP ................................................................................................................................................................... 5 3.2 FRONT SIDE SIDEWAYS ......................................................................................................................................................... 6 3.3 BACK SIDE ............................................................................................................................................................................ 6 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 4 of 6 1 Front side of the VP1004 enclosure 2 Internal components 2.1 Photo taken from the front side not potted electronics Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 5 of 6 2.2 Detailed photo of the electronics 3 The transmitter receiver module 3.1 Front side top Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Inductive Proximity Card Reader 134.2 kHz N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Page 6 of 6 3.2 Front side sideways 3.3 Back side

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland EPS B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Web: www.tuv-eps.com Project number: 11021702.fcc01 Page 1 of 17 TEST REPORT CONCERNING THE COMPLIANCE OF A 134.2 kHz INDUCTIVE PROXIMITY TAG READER, BRAND Nedap, MODEL VP1103 WITH 47 CFR PART 15 (10-1-09) AND THE REQUIREMENTS OF INDUSTRY CANADA: RSS-GEN (ISSUE 3, DECEMBER 2010) AND RSS-210 (ISSUE 8, DECEMBER 2010). 11021702.fcc01 December 13, 2011 FCC listed Industry Canada VCCI Registered R&TTE, LVD, EMC Notified Body : : : : 90828 2932G-1 R-1518, C-1598 1856 Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Project number : 11021702.fcc01 Page 2 of 17 MEASUREMENT/TECHNICAL REPORT N.V. Nederlandsche Apparatenfabriek “Nedap” Model: VP1103 FCC ID: CGDVP1103 IC: 1444A-VP1103 This report concerns: Original grant/certification Class 2 change Verification Equipment type: 134.2 kHz Inductive RFID tag reader Report prepared by: Name : Richard van der Meer Company name : TÜV Rheinland EPS B.V. Address : Smidshornerweg 18 Postal code/city : 9822 TL Niekerk Mailing address : P.O. Box 15 Postal code/city : 9822 ZG Niekerk Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : [email protected] The data taken for this test and report herein was done in accordance with 47 CFR Part 15 (10-1-09 edition), RSS-GEN, RSS-210 and the measurement procedures of ANSI C63.4-2009. TÜV Rheinland EPS B.V. at Niekerk, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: December 13, 2011 Signature: O. Hoekstra Senior Engineer Telecom TÜV Rheinland EPS B.V. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Project number : 11021702.fcc01 Page 3 of 17 Summary The device under test does: fulfill the general approval requirements as identified in this test report o not fulfill the general approval requirements as identified in this test report Description of test item Test item : Inductive RFID tag reader, operating on 134.2 kHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model(s) : VP1103 Serial number(s) : B106 0001 FCC ID : CGDVP1103 IC : 1444A-VP1103 Applicant information Applicant's representative : Mr. J. Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo Country : The Netherlands Telephone number : +31 544 471 162 Telefax number : +31 544 463 475 Test(s) performed Location : Niekerk Test(s) started : January 12, 2011 Test(s) completed : March 09, 2011 Purpose of test(s) : Equipment Authorization (Original grant/certification) Test specification(s) : 47 CFR Part 15 (10-1-09 Edition) and RSS-GEN (ISSUE 3, DECEMBER 2010) AND RSS-210 (ISSUE 8, DECEMBER 2010) Test engineer(s) : R. van der Meer Report written by : R. van der Meer Report date : December 13, 2011 This report shall not be reproduced, except in full, without the written permission of TÜV Rheinland EPS B.V. The test results relate only to the item(s) tested. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap VP1103 CGDVP1103 1444A-VP1103 Project number : 11021702.fcc01 Page 4 of 17 Table of contents 1 General information. .............................................................................................................................................. 5 1.1 Product description. ........................................................................................................................................ 5 1.1.1 Introduction. ............................................................................................................................................ 5 1.2 Related submittal(s) and/or Grant(s). ............................................................................................................. 5 1.2.1 General. .................................................................................................................................................. 5 1.3 Tested system details. .................................................................................................................................... 5 1.4 Test Summary ................................................................................................................................................ 7 1.4.1 Description of input and output ports. ..................................................................................................... 8 1.5 Test methodology. .......................................................................................................................................... 9 1.6 Test facility. .................................................................................................................................................... 9 1.7 Test conditions. .............................................................................................................................................. 9 2 System test configuration. .........................................................................................................................…

Text truncated - open the document above for the full version.

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland EPS B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 Internet: www.tuv-eps.com E-mail: [email protected] Project number: 11021702.p01 Page 1 of 9 PHOTOGRAPHS OF THE TESTSETUP OF A 134.2 kHz INDUCTIVE RFID TAG READER BRAND Nedap, MODEL VP1103. 11021702.p01 March 16, 2011 FCC listed Industry Canada VCCI Registered R&TTE, LVD, EMC Notified Body : : : : 90828 2932G-1 R-1518, C-1598 1856 Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 2 of 9 Description of test item Test item : Inductive RFID tag reader, operating on 134.2 kHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model(s) : VP1103 Serial number(s) : B106 0001 Revision : Not applicable FCC ID : CGDVP1103 IC : 1444A-VP1103 Applicant information Applicant's representative : Mr. J.A.M. Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo Country : The Netherlands Telephone number : +31 544 471 162 Telefax number : +31 544 463 475 E-mail : [email protected] Report written by : R. van der Meer Report date : March 16, 2011 Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 3 of 9 Table of contents 1 PHOTOGRAPHS OF THE TESTSETUP. ....................................................................................................................... 4 1.1 RADIATED EMISSIONS..................................................................................................................................................... 4 1.1.1 Radiated emissions H-field @ 3m ..................................................................................................................... 4 1.1.2 Radiated emissions H-field @ 10m ................................................................................................................... 5 1.1.3 Radiated emissions E-field @3m ...................................................................................................................... 6 1.1.4 Radiated emissions setup detail for H-field and E-field spurious emissions ............................................... 7 1.2 CONDUCTED EMISSIONS ................................................................................................................................................ 8 1.2.1 Conducted emissions testsetup overview ........................................................................................................ 8 1.2.2 Conducted emissions EUT detail ...................................................................................................................... 9 Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 4 of 9 1 Photographs of the testsetup. 1.1 Radiated emissions. 1.1.1 Radiated emissions H-field @ 3m Photo showing typical setup at 3 meters Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 5 of 9 1.1.2 Radiated emissions H-field @ 10m Photo showing typical setup at 10 meters Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 6 of 9 1.1.3 Radiated emissions E-field @3m Photo showing setup for models VP1103 and VP1850 working in a system Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 7 of 9 1.1.4 Radiated emissions setup detail for H-field and E-field spurious emissions Photo showing setup for models VP1103 and VP1850 working in a system Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 8 of 9 1.2 Conducted emissions 1.2.1 Conducted emissions testsetup overview Photo showing setup for models VP1103 and VP1850 working in a system Description of EUT: Manufacturer: Brand mark: Model: 134.2 kHz Inductive RFID Tag Reader N.V. Nederlandse Apparatenfabriek “Nedap” Nedap VP1103 Project number: 11021702.p01 Page 9 of 9 1.2.2 Conducted emissions EUT detail