CGDX2Anti-Pilferage Device

Page 1 of 9 ® MANUAL Pulse Listen X2 Check-out Line February 03, 2012 Part#: 9938176 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; Its publication conveys no license under patent or other right, nor does the publisher assume Liability for any consequence of its use; specifications and availability of goods mentioned in it are Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © N.V. Nederlandsche Apparatenfabriek “Nedap” Page 2 of 9 Technical Support E-Mail [email protected] Postal address N.V. Nederlandsche Apparatenfabriek “Nedap”, Parallelweg 2, 7141 DC, Groenlo, The Netherlands Phone +31 (0) 544-47 11 11 Fax +31 (0) 544-46 34 75 Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL. Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage points inside the product which could cause a serious electrical shock. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. WARNING! To avoid the risk of fire or electrical shock, never expose these products to water or operate in a high humidity environment. EN 50419:2005 This European Standard specifies a marking



of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which requires producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a ‘crossed-out wheeled bin’ symbol.



that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/EC, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products, which fall under the categories set out in Annex IA of this Directive;



that serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005. © 2012 N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 NL-7141 DC Groenlo The software / hardware described in this book / file is furnished under a license agreement and may be used only in accordance with the terms of the agreement. Copyright Notice All Rights Reserved. Any technical documentation that is made available by N.V. Nederlandsche Apparatenfabriek “Nedap” is the copyrighted work of N.V. Nederlandsche Apparatenfabriek “Nedap” and is owned by N.V. Nederlandsche Apparatenfabriek “Nedap”. Page 3 of 9 No warranty The technical documentation is being delivered to you and Nedap makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained therein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors Nedap the right to make changes without prior notice. No part of this publication may be copied without the express written permission of N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2, NL-7141 DC Groenlo, Netherlands Trademarks Nedap, the Nedap logo, Nedap EASi/Net and the Nedap EASi/Net are registered trademarks of N.V. Nederlandsche Apparatenfabriek “Nedap”. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Printed in the Netherlands Notice The documentation is based in a Part numbers and Drawing number structure. Part number can also be named as Artikel nummer or Article number Drawing numbers can also be named as: Tekening Drawing numbers are build up in a the drawing Number with a structure Txxxx-yyy-zz Txxxx-yyy is the drawing number and extension number zz means: 10 is an overview drawing of the part and can contain wiring and circuit diagrams; 11 is the bill of material; 12 is the circuit diagram of the device. Xxxx = 0000 – 9999 yyy = 000-999 Page 4 of 9 Table of content 1. Introduction 5 2. System overview 6 3. Wiring diagram 7 4. FCC/IC Declarations 8 5. Specifications X2 9 Page 5 of 9 1 INTRODUCTION N.V. Nederlandsche Apparatenfabriek “Nedap” further on called Nedap manufactures reliable and scalable EAS Systems With this X2 system your able to reduce the shoplifting costs the best in combination with Nedap’s tag line. The X2 system produces an acoustic – and visual signal when it detects an operating tag by means of the antennas and will identify a visitor with the active tag on one of his carried items. X2 is developed for middle scaled configurations. It starts with 2 antennas for one entrance scalable up to 150 entrances. The system is buildup in four different types of components: • Antennas with the following types: PG27, PG39, FL30, FL45, W37-CC and EQ45-F; • Transmitter and Receiver units installed into the antennas; • Network controlled unit named NCC; • Power inserter. With the Check-out line X2 you’re able to build big EAS systems connectable to the EASi/Net or Cube system. Some of the advantages are: 1. On the antenna there is an additional advertising space; 2. The antenna color can be chosen for a fitting look in the shop; 3. There is the opportunity to integrate the customer counting feature to measure the visitor stream; 4. Optional is the communication of the system to the outside world via GSM/GPRS, PSTN, LAN or WiFi; Further details can be found in the X2 Electronics Manual Page 6 of 9 2 System overview Figure 1 Functional system overview The system consists of the following components: 1. X2 Rx/Tx Unit 2. NCC unit for communication 3. Power inserter 4. Antenna frame 27…

Text truncated - open the document above for the full version.

- 1 - manual X2 Electronics Februari 2012 - 2 - Technical Support E-Mail : [email protected] Safety precautions CAUTION - RISK OF ELECTRIC SHOCK - DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERV- ICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL. Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated volt- age points inside the product which could cause a serious electrical shock. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instruc- tions in the documentation provided with the product. WARNING! To avoid the risk of fire or electrical shock, never expose these products to water or operate in a high humidity environment. EN 50419:2005 EN 50419:2005 This European Standard specifies a marking • of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which re- quires producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a ‘crossed-out wheeled bin’ symbol. • that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/ EC, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products, which fall under the categories set out in Annex IA of this Directive; • that serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005. © 2009 Nedap Retail Support Netherlands Parallelweg 2d, 7141 DC Groenlo The software / hardware described in this book / file is furnished under a license agreement and may be used only in accord- ance with the terms of the agreement. Documentation version SAFETY Manual X2 2012 Copyright Notice All Rights Reserved. Any technical documentation that is made available by Nedap Retail Support is the copyrighted work of Nedap Retail Support and is owned by Nedap Retail Support. No warranty The technical documentation is being delivered to you and Nedap Retail Support makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained therein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors Nedap Retail Support the right to make changes without prior notice. No part of this publication may be copied without the express written permission of Nedap Retail Support, Parallelweg 2d, 7141 DC Groenlo, Netherlands Trademarks Nedap, the Nedap logo, Nedap EASi/Net and the Nedap EASi/Net are registered trademarks of Nedap N.V. Groenlo. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Digital Printed in the Netherlands - 3 - Table of Contents 2 Technical Support 2 Safety precautions 2 Copyright Notice 4 1. Introduction 4 1.1 Communication functions 4 1.2 Customer Counting 4 1.3 Key Switch 4 1.4 Crying Funtion 5 1.5 Benefits 5 1.6 Software version 6 2. Block diagram SDR PCB 6 2.1 Network communication control 6 2.1.1 Hand-terminal-connection 6 2.1.2 Data communication over coax and Power 6 2.2 Anti-deactivation regulation (Detection mode) 6 2.3 Tag Analyzer 6 2.4 Transceiver section 7 2.5 Master - Slave settings and status LEDs 7 2.5.1 View X2 electronics Status 7 2.5.2 Change X2 functionality 7 2.6 X2 approved antennas 7 2.7 Data communication 8 2.8 Customer counting 8 2.9 DC Power Supply 9 3. PCB Components overview 9 3.1 Connector overview 9 3.2 LED overview 10 4. Unit address 10 5. Connection to PC / Laptop 11 6. Configuration Manager 11 6.1 PL TAB 11 6.2 PL RX TAB 11 6.3 PL TX TAB 12 6.4 PL Sync TAB 13 6.5 PL Alarm TAB 13 6.6 ASC 13 6.7 Spectrum analyzer 15 7. System configuration 15 7.1 Medium scale installation example 17 8. Specifications X2 - 4 - 1. Introduction • System adapt to any environment • Cognitive (Radio) system (Software Defined Radio) • It monitors the utilization of the RF spectrum in the neighborhood, and configures it self for best performance • Quickly and easily upgradeable with enhanced features • Can be reconfigured “on-the-fly”: Detection or label analyzer Software radio is the art and science of building radios using software. By radio, we mean any kind of device that intentionally transmits or receives signals in the radio frequency (RF) part of the electromagnetic spectrum. Given the constraints of today’s technology, there is still some RF hardware involved, but the idea is to get the software as close to the antenna as is feasible. Ultimately, we’re turning hardware solutions into software solutions. The label analyzer has an increased detection range, and has a quick detection and deactivation including important information like accurate Q and frequency measurement. It can also measure differences in deactivation levels. The detection system can function without NCC and can be switched into a master. 1.1 Communication functions Communication remote assistance or data delivery is done by use of an NCC MK2 master unit. There are no onboard communication functions. With a combination of customer counting and above capabilities you can use, alter and monitor remote-diagnostics, firmware-upgrade and system configurations. To communicate with the Nedap Configuration Manager, a connection through USB has to be established. This is a connection between the onboard Mini-USB connector K210 and an USB connector in the PC or laptop. 1.2 Customer Counting The X2 PCB has Customer Counting possibilities for one aisle. Gathered data can be shown on the Easinet™. 1.3 Key Switch The X2 can be fitted with an Key Switch. The switch has to be connected to K208 (for connector images, see 1.2 …

Text truncated - open the document above for the full version.

Page 1 of 3 ® INSTALLATION MANUAL FLOOR ANTENNA EQ 45-F February 07, 2012 Part#: 9886168 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; Its publication conveys no license under patent or other right, nor does the publisher assume Liability for any consequence of its use; specifications and availability of goods mentioned in it are Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © N.V. Nederlandsche Apparatenfabriek “Nedap” Page 2 of 3 INSTALLATION 1 Make a hole in the floor 1810mm x 710mm with a depth of 74 mm. Equalize the surface with fluid concrete or another material to equalize the surface. 2 Fit the antenna in the hole and mark the drill holes to drill 8 holes with a diameter of 10mm deep 80mm. 3 Place the Antenna assembly 9886168 in the hole and fix the antenna assembly so that the surfaces from the floor and antenna are equal. 4 Fix the Antenna construction with the fisher screws article Fisher Hammerfix article 50347 5 After mounting the antenna assembly the rest holes can be filled with fluid concrete or another fill material. Page 3 of 3

Return address: PO Box 6, 7140 AA Groenlo, The Netherlands ATCB Attn.: Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Groenlo, 11 January 2012 Subject: Request of Confidentiality FCC ID: CGDX2 Dear Mrs. Bosley, Pursuant to section 0.457(d)(2)(i) and Section 0.459 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID : CGDX2 Brand : Nedap Model : X2 to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than N.V. Nederlandsche Apparatenfabriek "NEDAP" and TÜV Rheinland Electronic Products & Services (EPS) B.V.: 1. Bill of materials 2. Circuit diagram 3. Block diagram 4. Theory of operation (technical description) The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, N.V. Nederlandsche Apparatenfebriek “Nedap” Jacques Hulshof Approbation Management

Groenlo, 14 February 2012 Antenna information Description : 8.2 MHz Anti Pilferage System FCC ID : CGDX2 Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : X2 Antennas : AL30, AL45, PG27, PG39 and EQ45-F A. AL30, AL45, PG27 and PG39 Each one consist of an “0” antenna, one inductive loop “8” antenna and a double inductive loop “8” antenna. The attached drawings show three wiring diagrams: 1. Loop 1: O-Antenna is a current cancellation antenna short-circuit terminated 2. Loop 2: 8-Antenna connected to the transceiver 3. Loop 3: Double 8-Antenna connected to the transceiver B. EQ45-F Dimensions : 495 by 1600 mm Material : Copper Shape : See below Jacques Hulshof

Page 1 of 10 Anti pilferage System Brand NEDAP Model X2 Exterior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 2 of 10 Description of item Description of EUT : Anti Pilferage System Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : X2 FCC ID CGQX2 IC 1444A-X2 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 February 14, 2012 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 3 of 10 Table of contents 1 OVERVIEW OF THE ANTENNAS OF THE X2 SYSTEM ...................................................................................................... 4 1.1 FL30, FL45, PG27 AND PG39 ANTENNAS .................................................................................................................................. 4 1.2 EQ45-F ANTENNA INCLUDING TRANSCEIVER BOX ..................................................................................................................... 5 1.3 TRANSCEIVER BOX FOR THE EQ45-F ANTENNA ......................................................................................................................... 6 1.4 ANTENNA FL 30 ......................................................................................................................................................................... 7 1.5 ANTENNA FL-45 ........................................................................................................................................................................ 7 1.6 ANTENNA PG27 ......................................................................................................................................................................... 8 1.7 ANTENNA PG39 ......................................................................................................................................................................... 8 1.8 COPPER ANTENNA EQ45-F ........................................................................................................................................................ 9 1.9 POWER SUPPLY ......................................................................................................................................................................... 10 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 4 of 10 1 Overview of the antennas of the X2 system 1.1 FL30, FL45, PG27 and PG39 antennas NOTE: X2 transceiver build in the foot of the antenna. Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 5 of 10 1.2 EQ45-F Antenna including transceiver box ` Front side of Antenna EQ45-F Back side of Antenna EQ45-F Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 6 of 10 1.3 Transceiver box for the EQ45-F antenna Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 7 of 10 1.4 Antenna FL 30 1.5 Antenna FL-45 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 8 of 10 1.6 Antenna PG27 1.7 Antenna PG39 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 9 of 10 1.8 Copper Antenna EQ45-F Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 CGDX2 1444A-X2 Page 10 of 10 1.9 Power supply

Page 1 of 8 Anti Pilferage System Brand Nedap Model X2 Label Location and artwork Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 2 of 8 Description of item Description of EUT : Anti Pilferage System Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : XQMK2 FCC ID CGDX2 IC 1444A-X2 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 February 14, 2012 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 3 of 8 Table of contents 1 Photographs of the X2 TX Antenna labels ............................................................................................................................. 4 1.1 Label position FL30 ....................................................................................................................................................... 4 1.2 Label position FL45 ....................................................................................................................................................... 4 1.3 Label position PG27 ....................................................................................................................................................... 5 1.4 Label position PG39 ....................................................................................................................................................... 5 1.5 Label position on the transceiver box of the EQ45-F Antenna ...................................................................................... 6 2 Photographs of the labels ....................................................................................................................................................... 6 2.1 Label detail FL30, FL45, PG27, PG39 and EQ45-F ...................................................................................................... 6 2.2 Compliance label FL30, FL45, PG27, PG39 and EQ45-F ............................................................................................. 7 3 Label artwork ......................................................................................................................................................................... 7 3.1 ID label ........................................................................................................................................................................... 7 3.2 Compliance labels .......................................................................................................................................................... 8 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 4 of 8 1 Photographs of the X2 TX Antenna labels 1.1 Label position FL30 1.2 Label position FL45 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 5 of 8 1.3 Label position PG27 1.4 Label position PG39 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 6 of 8 1.5 Label position on the transceiver box of the EQ45-F Antenna 2 Photographs of the labels 2.1 Label detail FL30, FL45, PG27, PG39 and EQ45-F Compliance labeling FCC ID and IC labeling Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 7 of 8 2.2 Compliance label FL30, FL45, PG27, PG39 and EQ45-F 3 Label artwork 3.1 ID label Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandsche Apparatenfabriek “NEDAP” NEDAP X2 XQMK2 1444A-X2 Page 8 of 8 3.2 Compliance labels

Page 1 of 13 Anti Pilferage System Brand Nedap Model X2 Interior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandse Apparatenfabriek “Nedap” Nedap X2 CGDX2 1444A-X2 Page 2 of 13 Description of item Description of EUT : Anti Pilferage System Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : X2 FCC ID CGDX2 IC 1444A-X2 Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 14 February 2012 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandse Apparatenfabriek “Nedap” Nedap X2 CGDX2 1444A-X2 Page 3 of 13 Table of contents 1 OVERVIEW ELECTRONICS IN ANTENNA FOOT .......................................................................................................... 4 1.1 FL30 ANTENNA .................................................................................................................................................................... 4 1.1.1 Transceiver .................................................................................................................................................................. 4 1.1.2 Antenna matching PCB ............................................................................................................................................... 4 1.2 FL45 ANTENNA .................................................................................................................................................................... 5 1.2.1 Transceiver .................................................................................................................................................................. 5 1.2.2 Antenna matching PCB ............................................................................................................................................... 5 1.3 PG27 ANTENNA .................................................................................................................................................................... 6 1.3.1 Transceiver .................................................................................................................................................................. 6 1.3.2 Antenna matching PCB ............................................................................................................................................... 6 1.4 PG39 ANTENNA .................................................................................................................................................................... 7 1.4.1 Transceiver .................................................................................................................................................................. 7 1.4.2 Antenna matching PCB ............................................................................................................................................... 7 2 OVERVIEW TRANSCEIVER PRINTED CIRCUIT BOARD ............................................................................................ 9 2.1 IN HOUSING .......................................................................................................................................................................... 9 2.2 COVER DELETED .................................................................................................................................................................. 9 2.3 TOPSIDE PCB ..................................................................................................................................................................... 10 2.4 BACKSIDE PCB .................................................................................................................................................................. 10 3 ANTENNA MATCHING PRINTED CIRCUIT BOARDS ................................................................................................. 11 3.1 FL30 .................................................................................................................................................................................. 11 3.2 FL45 .................................................................................................................................................................................. 11 3.3 PG27 .................................................................................................................................................................................. 12 3.4 PG39 .................................................................................................................................................................................. 12 3.5 EQ45-F .............................................................................................................................................................................. 13 Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandse Apparatenfabriek “Nedap” Nedap X2 CGDX2 1444A-X2 Page 4 of 13 1 Overview electronics in antenna foot 1.1 FL30 antenna 1.1.1 Transceiver 1.1.2 Antenna matching PCB Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandse Apparatenfabriek “Nedap” Nedap X2 CGDX2 1444A-X2 Page 5 of 13 1.2 FL45 antenna 1.2.1 Transceiver 1.2.2 Antenna matching PCB Description of EUT: Manufacturer: Brand mark: Model: FCC ID IC Anti Pilferage System N.V. Nederlandse Apparatenfabriek “Nedap” Nedap X2 CGDX2 1444A-X2 Page 6 of 13 1.3 PG27 antenna 1.3.1 Transceiver 1.3.2 Antenna matching PCB Description of EUT: Manufacturer: Brand mark: Model: F…

Text truncated - open the document above for the full version.

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland EPS B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Web: www.tuv-eps.com Project number: 11071502.fcc01_Rev02 Page …

Text truncated - open the document above for the full version.