CICDTX-A3-FDLRX BAND RADAR

UDU.;11!Ujqtg!Dcugf!Tcfct! U{uvgou! Qrgtcvqt!cpf!Ockpvgpcpeg!! Jcpfdqqm! ! ! ! ! ! ! ! ! ! ! ! MJ.2713.3!kuuwg!2! UKVWCVKQPCN!KPVGNNKIGPEG-!VJG!YQTNF!QXGT! SBS-900 Shore Based Radar Systems Chapter 1: Contents KH-1602-2issue 1: Standard SBS900 Systems Operator & Maintenance Handbook Page 2 of 240 Page intentionally blank SBS-900 Shore Based Radar Systems Chapter 1: Contents KH-1602-2issue 1: Standard SBS900 Systems Operator & Maintenance Handbook Page 3 of 240 1Contents 1Contents..................................................................................................................................... 3 2Health & Safety warnings ......................................................................................................... 7 2.1Hazards ....................................................................................................................................................................... 7 2.2Antenna rotation warning ............................................................................................................................................. 7 2.3Radiation hazards ........................................................................................................................................................ 8 2.4Microwave radiation levels ........................................................................................................................................... 8 2.5Working aloft ................................................................................................................................................................ 9 2.6Man aloft switch/ antenna isolation. .............................................................................................................................. 9 2.7Anti-static handling ..................................................................................................................................................... 10 2.8RoHS statement......................................................................................................................................................... 10 2.9End of life disposal ..................................................................................................................................................... 10 2.10AC supplies ........................................................................................................................................................... 11 2.11Grounding/ earth points ......................................................................................................................................... 12 3Software licensing and virus protection............................................................................... 13 3.1Software..................................................................................................................................................................... 13 3.2Virus precautions ....................................................................................................................................................... 13 4Handbooks............................................................................................................................... 15 5Technical overview ................................................................................................................. 17 5.1Generic system .......................................................................................................................................................... 17 5.2SBS-900 overview...................................................................................................................................................... 18 5.3SBS-900-1 ................................................................................................................................................................. 20 5.4SBS-900-2 ................................................................................................................................................................. 21 5.5SBS-900-3 ................................................................................................................................................................. 22 5.6SBS-900-4 ................................................................................................................................................................. 23 5.7SBS-900-51 ............................................................................................................................................................... 24 5.8Standard antenna sub system .................................................................................................................................... 25 5.9Advanced antenna sub system .................................................................................................................................. 26 5.10Transceiver enclosure ........................................................................................................................................... 27 5.11Radar Distribution Unit .......................................................................................................................................... 30 5.12System control ...................................................................................................................................................... 32 5.13Unit identification................................................................................................................................................... 33 6Local operation instructions.................................................................................................. 35 6.1Antenna rotation warnings.......................................................................................................................................... 35 6.2Local c…

Text truncated - open the document above for the full version.

11th March 2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: CICDTX-A3-FDLR. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type Block Diagram Schematics Circuit Description Tuning Procedure File Name Block diagram Upmast Transceiver.pdf Block diagram Drive Control Unit.pdf Schem – SB800 Series Transmitter.pdf Schem – SharpEye Radar Process Chain Dual Freq.pdf Schem – SharpEye Radar Process Single Freq.pdf Circ Desc - Standard SharpEye Process Chain Description.pdf Tuning procedure.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Page 2 Exhibit Type File Name External Photos External photos.pdf Internal Photos Internal photos.pdf User Manual KH-1602-2 SBS 900 Operator & Maintenance Handbook.pdf Sincerely, Adrian Pilbeam Vice President

APPLICANT: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Front view with external cover removed Product exterior rear view Side view showing label location and cable entry way DTX-A213 Sharpeye Transceiver

11 22 33 44 55 66 A A B B C C D D USED ON BY DRAWN PROJECTION ALL DIMENSIONS IN MILLIMETRES (UNLESS OTHERWISE STATED) DO NOT SCALE M/C SCALEDEPT MATERIAL HOLES OVER 6mm TO BS4500 H13 TWO DECIMAL PLACES 0.15 ONE DECIMAL PLACE 0.5 NO DECIMAL PLACE 1.0 1 DIMENSIONAL HOLE DIA UP TO 6mm TO BS4500 H11SCREW THREADS OTHERWISE STATEDTOLERANCES UNLESS INTERNALEXTERNALCOARSE PITCH CLASS 6HCLASS 6gBS 3643 ` FINISH Drawing No TITLE NAME Contd On ISSUE CR NOTE Kelvin Hughes Ltd 2014 This document is the property of Sheet No ` ` `` ` ` ANGULAR ~ DRAWING PRACTICE TO BS 8888 DATE THIRD ANGLE A 3 DTX-1244 AG DTX-A3-XXXX AG FCC LABEL REL 1 07/10/2014 55-100-0092-001 SEE DRAWING 1:1 1 COMM NOTES 1. LABEL TO BE MANUFACTURED IN ACCORDANCE WITH CP22 9 LABEL G. 98 REF 48 REF

APPLICANT: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Internal photos DTX-A213 CONTROLLER DTX-A213 DOWNCONVERTER DTX-A213 HPA DC DTX-A213 HPA RF DTX-A213 LNA DTX-A213 UPCONVERTER

RF Exposure Evaluation Report APPLICANT KELVIN HUGHES LIMITED VOLTAGE, MOLLISON AVENUE ENFIELD EN3 7XQ UNITED KINGDOM FCC ID CICDTX-A3-FDLR MODEL NUMBER DTX-A3-AFFB PRODUCT DESCRIPTION X BAND MARINE RADAR STANDARD APPLIED CFR 47 Part 2.1091 PREPARED BY Mario de Aranzeta We, TIMCO ENGINEERING, INC. declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and meets the requirements. The attached report shall not be reproduced except in full without the written approval of TIMCO ENGINEERING, INC. 849 NW STATE ROAD 45 NEWBERRY, FL 32669 USA PH: 888.472.2424 OR 352.472.5500 FAX: 352.472.2030 EMAIL: [email protected] HTTP://WWW.TIMCOENGR.COM Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: K\KELVIN_CIC\1055AUT14\1055AUT14TestReport.docxt Page 2 of 6 GENERAL REMARKS Attestations This equipment has been evaluated in accordance with the standards identified in this report. To the best of my knowledge and belief, these evaluations were performed using the procedures described in this report. I attest that the necessary evaluations were made, under my supervision, at: Timco Engineering Inc. 849 NW State Road 45 Newberry, Fl 32669 Authorized Signatory Name: Mario de Aranzeta Engineering Project Manager Date: June 30, 2014 Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: K\KELVIN_CIC\1055AUT14\1055AUT14TestReport.docxt Page 3 of 6 GENERAL INFORMATION EUT Description X BAND MARINE RADAR FCC ID CICDTX-A3-FDLR Model Number DTX-A3-AFFB Frequency Range 9220 TO 9480 MHz Type of Emission 48M2P0N Modulation Pulsed EUT Power Source 110–120Vac/50– 60Hz DC Power 12V Battery Operated Exclusively Test Item Prototype Pre-Production Production Type of Equipment Fixed Mobile Portable Test Conditions The temperature was 26ºC relative humidity of 54%. Revision History to the EUT None Test Facility Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 USA. RF Exposure Requirements General information Device type: Part 80 and 90 radar assembly designed ffor X band use. Devices that operate under Part 90 of this chapter are subject to RF exposure evaluation prior to equipment authorization or use. Antenna The manufacturer does specify the antennas and the gains run from 28 to 39 dB in gain. Configuration Antenna Type Gain Fixed mounted Slot arrays Horizontal 28 to 39 dB Operating configuration and exposure conditions: The conducted output power is 200 Watts Peak/ 27 Watts average. This value is based on a 50 μs pulse length and a 2500 Hz pulse repetition rate. MPE Calculation: The minimum separation distance is calculated as follows: The limit for general uncontrolled exposure environment is shown in FCC rule Part 1 section 1310Table 1. Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: K\KELVIN_CIC\1055AUT14\1055AUT14TestReport.docx Case 1: lowest gain antenna Inputs: Frequency: 9400 MHz Antenna gain 28 dBi Antenna diameter: 3.7 m Mean power (average): 27 Watts Results: The distance required for compliance is less than the diameter of the antenna and therefore the user will always be at a distance greater than required for compliance. Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: K\KELVIN_CIC\1055AUT14\1055AUT14TestReport.docx Case 2: highest gain antenna Inputs: Frequency: 9400 MHz Antenna gain 39 dBi Antenna diameter: 5.5 m Mean power (average): 27 Watts Results: The distance required for compliance is less than the diameter of the antenna and therefore the user will always be at a distance greater than required for compliance.

849 NW STATE ROAD 45 NEWBERRY, FL 32669 USA PH: 888.472.2424 OR 352.472.5500 FAX: 352.472.2030 EMAIL: [email protected] HTTP://WWW.TIMCOENGR.COM FCC PART 80 & 90 TEST REPORT APPLICANT KELVIN HUGHES LIMITED VOLTAGE, MOLLISON AVENUE ENFIELD EN3 7XQ UNITED KINGDOM FCC ID CICDTX-A3 -FDLR MODEL NUMBER DTX-A3 -AFFB PRODUCT DESCRIPTION X-BAND RADAR DATE SAMPLE RECEIVED June/23/ 2014 DATE TESTED June 23 rd to June 26 th 2014 TESTED BY Mario de Aranzeta APPROVED BY Mario de Aranzeta TIMCO REPORT NO. 1055AUT14TestReport.docx TOTAL PAGES 17 REPORT ISSUE DATE: June 27 th 2014 TEST RESULTS PASS FAIL THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC. Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: W:\K\KELVIN_CIC\1055AUT14\1055AUT14 TEST REPORT.DOCX Page 2 of 17 TABLE OF CONTENTS GENERAL REMARKS ...................................................................................... 3 DUT SPECIFICATION ..................................................................................... 4 TEST SETUP INFORMATION ............................................................................ 4 EQUIPMENT LIST .......................................................................................... 5 TEST PROCEDURE ......................................................................................... 6 RF POWER OUTPUT ....................................................................................... 7 MODULATION CHARACTERISTICS ................................................................... 8 OCCUPIED BANDWIDTH PLOT(S) .................................................................. 12 SPURIOUS EMISSIONS AT ANTENNA TERMINALS (CONDUCTED) ....................... 15 FIELD STRENGTH OF SPURIOUS EMISSIONS .................................................. 16 FREQUENCY STABILITY ............................................................................... 17 Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: W:\K\KELVIN_CIC\1055AUT14\1055AUT14 TEST REPORT.DOCX Page 3 of 17 GENERAL REMARKS The attached report shall not be reproduced except in full without the written permission of Timco Engineering Inc. The test results relate only to the items tested. Summary The device under test does: fulfill the general approval requirements as identified in this test report not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025: 2005 requirements. I attest that the necessary measurements were made, under my supervision, at: Timco Engineering Inc. 849 NW State Road 45 Newberry, Fl 32669 Authorized Signatory Name: Mario de Aranzeta C.E.T. Project Manager Date: June 27, 2014 Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: W:\K\KELVIN_CIC\1055AUT14\1055AUT14 TEST REPORT.DOCX Page 4 of 17 DUT SPECIFICATION DUT Description NAVIGATION RADAR 9.2 TO 9.5 GHz FCC ID CICDTX-A3-FDLR Model Number DTX-A3-AFFB Serial Number N/A Operating Frequency 9.22 to 9.48 GHz Type of Emission Pulse Modulation 48M2P0N DUT Power Source 110–220Vac/50– 60Hz DC Power () Battery Operated Exclusively Test Item Prototype Pre-Production Production Type of Equipment Fixed Mobile Portable Antenna Gain Various from 28 to 39 dB Antenna Connector WR-90 (waveguide) TEST SETUP INFORMATION Test facility Timco Engineering, Inc. 849 NW State Road 45, Newberry, FL 32669 Test Condition Temperature: 26ºC Relative humidity: 50%. Modifications None Test Exercise The DUT was placed in mode that transmitted the same burst over and over, continuously Applicable Standards ANSI/TIA 603-D: 2010, FCC CFR 47 Part 80 & 90 Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: W:\K\KELVIN_CIC\1055AUT14\1055AUT14 TEST REPORT.DOCX Page 5 of 17 EQUIPMENT LIST Device Manufacturer Model Serial Number Cal/Char Date Due Date EMI Test Receiver Rhode & Schwarz ESU 40 100320 03/21/13 03/21/15 Analyzer Silver Tower Spectrum Analyzer HP 8566B Opt 462 3552A22064 3638A08608 06/05/13 06/05/15 Analyzer Silver Tower Quasi- Peak Adapter HP 85650A 2811A01175 06/05/13 06/05/15 Analyzer Silver Tower RF Preselector HP 85685A 2926A00983 06/05/13 06/05/15 3-Meter Semi- Anechoic Chamber Panashield N/A N/A 12/31/13 03/31/15 Coaxial Cable - Chamber 3 cable set Semiflex Unknown Chamber 3 cable set 01/13/14 01/13/16 Digital Multimeter Fluke 77 35053830 08/22/13 08/22/15 Hygro- Thermometer Extech 445703 0602 06/20/13 06/20/15 LISN Electro-Metrics ANS-25/2 2604 01/07/14 01/07/16 LISN Electro-Metrics EM-7820 2682 02/26/13 02/26/15 LISN Electro-Metrics FCC-25/2 2512 06/05/13 06/05/15 Measuring Tape- 7.5M Kraftixx 7.5M PROFI 05/20/13 05/20/15 Oscilloscope LeCroy LT364 00414 08/22/13 08/22/15 RF Power Amplifier Ophir RF 5150F 1041 02/22/13 02/22/15 RF Power Meter Boonton 4531 11793 01/19/13 01/19/15 Sensor Boonton 51072A 34647 01/19/13 01/19/15 Signal Generator HP 8648C 3623A02898 08/29/13 08/29/15 Signal Generator Anritsu 68369A 985112 8/29/13 8/29/15 Manufacturer Model Receiver Firmware BIOS Ver Rohde & Schwarz ESU40 4.43 SP3 V5.1-24-3 Rohde & Schwarz ESIB40 4.34.3 3.3 Applicant: KELVIN HUGHES LIMITED FCC ID: CICDTX-A3-FDLR Report: W:\K\KELVIN_CIC\1055AUT14\1055AUT14 TEST REPORT.DOCX Page 6 of 17 TEST PROCEDURE Power Line Conducted Interference: The procedure used was ANSI/TIA 603-D : 2010 using a 50uH LISN. Both lines were observed with the DUT transmitting. The bandwidth of the spectrum analyzer was 10 kHz with an appropriate sweep speed. Bandwidth 20 dB: The measurements were made with the spectrum analyzer's resolution bandwidth (RBW) = 1 MHz and the video bandwidth (VBW) = 3 MHz…

Text truncated - open the document above for the full version.