CJ6UPA5145TJTransferJet MicroUSB Adapter

Preface This product is the MicroUSB adapter corresponding to the TransferJet TM standard. Using TransferJet TM communication, you can transfer the data in your Android TM device. ＊This product functions only at Android TM device which is equipped the MicroUSB interface (Supporting host function). ＊This product functions only by the combination with dedicated the file transfer software. This product cannot do the use in single or combination other file transfer software. ＊The OS (Operating System) of the Android TM device is only for Android OS 4.0~4.2 supports. About TransferJet TM TransferJet TM is the close proximity wireless transfer technology that can transfer data just to shade it directly with the apparatus which wants to communicate. High-speed data transmission without carrying out a troublesome activity such as the cable connection is possible. Before use Please be sure to use correctly read this User’s Manual (the following this manual), and the operation manual of use apparatus. Please keep it at hand after reading. Safety Precautions and Request Explanation of the Indicates Indicates a hazardous situation which, if not avoid, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. ●Accidentally swallowing the Product may cause suffocation or injury. Keep out of reach of children or pets. ●Do not bend, drop, place heavy objects upon the Product, or otherwise expose the Product to shoring force or impact. ●If the Product produces an odor, overheats or smokes, immediately turn off the device with which the Product is used, including Android TM device and peripherals, immediately and disconnect the power card/cable from the outlet. Failure to follow these instructions could result in fire, damage to the Product, and/or personal injury including burns and electric shock. Do not use the Product again. Do not let the bare skin touch this product directly for a long time. The surface of the main body is charged with heat for long-time use. There is a possibility of becoming a low-temperature burn by long-time touching the main body. Please warn the person having weak skin in particular. Handling Precautions ●If you do not follow the instructions below, there is a risk of malfunction or failure. ●Do not touch directly the interface pins, and do not put hard metal them and do not short them. The adapter might destroy by static electricity. ●Do not get it wet. Do not keep it with the use in the range more than the movement environment (temperature, humidity). Do not put it near a place with much dust, a place with static electricity, an electricity noise, strong magnetism it, a place with the corrosive medicine and gas, a fever thing, an ignition thing. ●Do not switch it off, and do not remove from an apparatus during the communication of this product. ●When you attach this product to Android TM device and communicate, do not hit with the adapter of the partner apparatus. This product and Android TM device might be broken by a shock at the time of the hit. ●Particularly high quality, reliability is required, and please never use this product to an apparatus (including atomic energy control equipment, an aerospace apparatus, transportation equipment, a traffic light apparatus, a combustion control, medical equipment, various safety devices, etc.) which the trouble and malfunction threaten direct human life, and might give harm to the human body. ●The transfer rate of this product changes by the position relations of TransferJet TM device. TransferJet TM MicroUSB adapter User’s Manual WARNING WARNING CAUTION CAUTION Installation procedure of the file transfer software It is necessary to install the file transfer software in Android TM device beforehand to use a file transfer function. Installation procedure to Android TM device ① Tap 「Play store」 icon on Android TM device. Then, start 「Google Play TM 」 application. ② Search 「TransferJet Utility」software and install it. ③ Please refer to the following web site for the detail of installation procedure. http://www.toshiba.co.jp/p-media/transferjet/index_j.htm Usage of the file transfer function  Insert the MicroUSB adapter to the MicroUSB port of Android TM device.  The file transfer software start automatically and became the reception state.  Let Android TM device which insert the MicroUSB adapter in and a facing TransferJet TM device in face both.  Start the file transfer software of a facing TransferJet TM device and execute file transfer to Android TM device.  In case of a facing TransferJet TM device reception, let you face with Android TM device which the MicroUSB adapter was inserted in, and make Android TM device transmission state, and make a facing TransferJet TM device reception state, then file transfer Android TM device to a facing TransferJet TM device.  Please refer to the following web site for the detailed usage of the file transfer software of Android TM device.  About the usage of the transfer software of a facing TransferJet TM device please refer to the operation manual for it.  When you remove the MicroUSB adapter from Android TM device, you terminate file transmission and reception. And remove it. Main Specification Movement environment temperature ５～35°C humidity 20～80%RH（not be dew condensation） External dimensions Approx. 2１.０mm(L)ｘ24.7mm(W)ｘ 7.8mm(H) (excl. protruding parts) Weight Approx. 2.1g Rating supply voltage 5V Interface USB2.0 Bundling product TransferJet TM MicroUSB adapter（1pcs.） User’s manual（this manual） （1pcs.） ＊It may change design, the specifications without a notice. Trademarks ●© 2013 TOSHIBA CORPORATION, All Rights Reserved. ●TransferJet TM and TransferJet TM logos are licensed by the TransferJet Consortium. ●Android TM , Goole Play TM are trademarks of Google Inc. LIMITATIONS ●Toshiba do not take responsibility about a fire, an earthquake, the act by the third party, other accidents, the intent…

Text truncated - open the document above for the full version.

FCC Test Report Report No. : EP3O0402 SPORTON International Inc. PAGE NUMBER : B2 OF B5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 13, 2013 FAX : 886-3-327-0973 FCC Test Report Report No. : EP3O0402 SPORTON International Inc. PAGE NUMBER : B3 OF B5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 13, 2013 FAX : 886-3-327-0973 FCC Test Report Report No. : EP3O0402 SPORTON International Inc. PAGE NUMBER : B4 OF B5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 13, 2013 FAX : 886-3-327-0973 FCC Test Report Report No. : EP3O0402 SPORTON International Inc. PAGE NUMBER : B5 OF B5 TEL : 886-3-327-3456 ISSUED DATE : Dec. 13, 2013 FAX : 886-3-327-0973

FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : 1 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 FCC Test Report Equipment : TransferJet MicroUSB Adapter Brand Name : TOSHIBA Model No. : TJM35420MU FCC ID : CJ6UPA5145TJ Standard : 47 CFR FCC Part 15.517 Operating Band : 4488 MHz FCC Classification : UWB Applicant : TOSHIBA CORPORATION 1-1, Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan Manufacturer : GOOD WAY TECHNOLOGY CO.,LTD. 3F, No. 135, Ln. 235, Baociao Rd., Sindian Dist., New Taipei City 231, Taiwan, R.O.C The product sample received on Oct. 03, 2013 and completely tested on Nov. 27, 2013. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2009 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Wayne Hsu / Assistant Manager FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : 2 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Table of Contents 1 GENERAL DESCRIPTION ............................................................................................................... 5 1.1 Information ........................................................................................................................................ 5 1.2 Support Equipment ........................................................................................................................... 9 1.3 Testing Applied Standards ................................................................................................................ 9 1.4 Testing Location Information ............................................................................................................. 9 1.5 Measurement Uncertainty ............................................................................................................... 10 2 TEST CONFIGURATION OF EUT .................................................................................................. 11 2.1 The Worst Case Modulation Configuration ...................................................................................... 11 2.2 Test Channel Frequencies Configuration ......................................................................................... 11 2.3 The Worse Case Power Setting Parameter ..................................................................................... 11 2.4 The Worst Case Measurement Configuration .................................................................................. 11 2.5 Test Setup Diagram ........................................................................................................................ 13 3 TRANSMITTER TEST RESULT ..................................................................................................... 15 3.1 AC Power-line Conducted Emissions .............................................................................................. 15 3.2 UWB bandwidth .............................................................................................................................. 18 3.3 Peak Emissions within a 50 MHz Bandwidth.................................................................................... 20 3.4 Radiated Emissions ........................................................................................................................ 22 4 TEST EQUIPMENT AND CALIBRATION DATA ............................................................................. 50 APPENDIX A. TEST PHOTOS APPENDIX B. PHOTOGRAPHS OF EUT FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : 3 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Summary of Test Result Conformance Test Specifications Report Clause Ref. Std. Clause Description Measured Limit Result 1.1.2 15.203 Antenna Requirement Mechanism complied FCC 15.203 Complied 1.1.6 15.517(a) Operational Restriction Informed the applicant 15.517(a) Complied 1.1.7 15.517(f) Labeling Requirements Informed the applicant 15.517(a) Complied 3.1 15.207 AC Power-line Conducted Emissions [dBuV]: 0.1903870MHz 51.97 (Margin 12.05dB) - QP 43.02 (Margin 11.00dB) - AV FCC 15.207 Complied 3.2 15.517(b) UWB Bandwidth 692MHz • 500MHz Complied 3.3 15.517(e) Peak Emissions within a 50 MHz Bandwidth -28.54 dBm/50MHz ” 0 dBm/50MHz Complied 3.4 15.517(c) /15.517(d) Radiated Emissions [dBuV]: 14394MHz 65.77 (Margin 8.23dB) - PK 52.62 (Margin 1.38dB) - AV UWB Emissions: FCC 15.517(c) GPS Emissions: FCC 15.517(d) Digital Emissions: FCC 15.209 Complied FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : 4 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Revision History Report No. Version Description Issued Date FR3O0402 Rev. 01 Initial issue of report Dec. 13, 2013 FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : 5 of 51 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 1 General Description 1.1 Information 1.1.1 RF General Information RF General Information Frequency Range (GHz) Mode Ch. Freq. (GHz) Channel Number Transmit Chains (N TX ) Peak Power (dBm/50MHz) EIRP Avg Power (dBm/MHz) EIRP 4.2-4.8 TransferJet 4.48 1 1 -28.54 -66.33 Note 1: TransferJet uses Pi/2 shift BPSK + DSSS modulation. 1.1.2 Antenna Information Antenna Category Integral antenna (antenna permanently attached) Temporary RF connector provided No temporary RF connector provided Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. Externa…

Text truncated - open the document above for the full version.

FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A1 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 Appendix A. Test Photos FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A2 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 1 Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A3 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 SIDE VIEW FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A4 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 2 Photographs of Radiated Emissions Test Configuration For radiated emissions 9kHz~30MHz FRONT VIEW REAR VIEW FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A5 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 For radiated emissions 30MHz~1GHz FRONT VIEW REAR VIEW FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A6 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 For radiated emissions 3GHz to 5GHz FRONT VIEW REAR VIEW FCC Test Report Report No. : FR3O0402 SPORTON INTERNATIONAL INC. Page No. : A7 of A7 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973 For radiated emissions above 1 GHz to 18 GHz FRONT VIEW REAR VIEW