CKEJHS-183MARINE AIS CLASS A

5-65 5.4 Explanation of Graphic display 5.4.1 The Outline of Display NCM-983 Panel side and Display 5.4.2 Operation for Graphic display In order to switch the display, press DISP key until Graphic display is appeared. Also, the display can be switched from Graphic display to MAIN MENU to change the setting of this equipment. Press CLR key at MAIN MENU, the display is switched to Graphic display. DISP key DISP key MENU key CLR key .+56 51464#0)' $4) c40) 0/ '6OKP 0#/' 5#46 ,4% ,4% 61-; Ť#+%*   /#+0 /'07 81;#)' &#6# /'55#)' /#+06'0#0%' 5'6 72 =':+6? )4#2* 40)0 72 ,4% $4)  c 40) 0/ *&)  c 51)MP %1) c  )4#2* 40)0 72 ,4% $4)  c 40) 0/ *&)  c 51)MP %1) c  5-66 5.4.3 Setting the Contents of Graphic Display Explain the setting of graphic display (e.g. range changes, setting of guard zone). 5.4.3.1 Display the Setting Screen Press SUB key at Graphic screen, and then switch to SUB MENU. In this SUB MENU, Select the desirable item with  key or  key and Press ENT key, then the item can be set. When [SET] is selected on page 2/3, the setting is saved. When [EXIT] is selected on page 3/3, the display switched to MAIN MENU. 5.4.3.2 Display Item Explanation 1. RANGE RANGE means the radius of external circle in the graphic screen. It is selected from 6 steps (0.75,1.5,3,6,12,24NMwith  key or  key. 2. BEARING North up of Head up can be select with  key or  key. North up Displays on a north basis Head up Displays on own ship’s heading basis. In case Heading value is not inputted (Not available), Only North up can be selected. 3. SORT SORT is selected from RANGE, TCPA and GROUP with  key or  key. RANGE In order of the distance from own ships and OTHER SHIPS LIST is arranged. TCPA In order of small TCPA from own ship and the list is arranged. GROUP In order of the distance and gives priority GROUP SHIP, and the list is arranged. SUB key SUB key  or  )4#2*+% &+52 5'6 57$ /'07 4#0)'0/ $'#4+0)0146* 72 51464#0)' 0#/'5*+20#/' Ť)7#4& <10'0/   )4#2*+% &+52 5'6 57$ /'07 Ţ07/$'4 1( 5*+25  %1064#56 #761 4#0)'10 Ť =5'6?  )4#2*+% &+52 5'6 57$ /'07 Ţ=':+6?  )4#2* 40)0 72 ,4% $4)  c 40) 0/ *&) c 51)MP %1)  c  5-67 4. SHIP NAME The SHIP NAME is selected from SHIP NAME and MMSI. 5. GUARD ZONE The range of GUARD ZONE ALARM can be set. The range is set from 0 to 99.9NM.  If 00.0NM is set, the alarm is cancelled. In order to see this operation, refer to 5.2.3.1 GUARD ZONE ALARM 6. The number of ships displayed in Graphic screen The number of ships displayed in Graphic screen can be limited. The number is selected from 8,16,24,32,200 with  key or  key. This function is set in case it is hard to distinguish others in this screen. 7. CONTRAST The contrast of display can be adjusted. The range is selected from 1 to 13 with  key or  key. 8. AUTO RANGE  When a ship (located within 24NM) is selected in the list, Graphic range is set automatically and is adjusted to its distance. Select from ON (valid) or OFF (invalid) with  key or  key. 5-68 5.4.3.3 Display ጄ HeadingIn 90-degree segment, 4 types are listed below. Value [degree] 314.5 45.4 45.5 134.4 134.5 224.4 224.5 314.4 Display         ጅ ROT3 types are listed below. Course + (right)  (left) 0 (straight) display       ጆ Other marks Classification Mark Classification Mark Own ship  AIS SART  Other ships  Mark of route(Real) Aids to navigation  Base station  Mark of route (Virtual)  Cursor ጇ Display line Classification Mark Note Range circle Setting range Displayed by 15 degree interval circle. Guard zone alarm circle Setting range of guard zone Displayed by 30 degree interval circle   5-69 5.4.4 Selection of Other Ships The cursor in Graphic display can move with  key or  key. When  key is pressed, ships are selected by descending order of the setting SORT. When  key is pressed, ships are selected by ascending order of the setting SORT. 5.4.5 Auto Range Setting After “AUTO RANGE” is set “ON” (valid), this function works under the condition shown below. On condition that Graphic range set previously is smaller than the ship’s distance selected in the list (located within 24NM), and then press DISP key and displays the Graphic screen. The range is set automatically and is adjusted to its distance. Therefore the ship selected can be confirmed in the Graphic display. e.g.If the Graphic range is set 0.75NM previously and A ship which is 4.85NM away from own ship is selected in the list, the progress is shown below. The range is changed 0.75NM into 6.0NM. DISP key  or  .+56 51464#0)' $4) c40) 0/ '6OKP 0#/' 0+*10 ,4% $#5'   )4#2* 40)0 72 ,4% /#47 *&) c 51)MP %1)  c  )4#2* 40)0 72 ,4% $4)  c 40) 0/ *&) c 51)MP %1)  c  )4#2* 40)0 72 ,4% $4)  c 40) 0/ *&) c 51)MP %1)  c  5-70 6-1 6. MAINTENANCE AND INSPECTION The performance and longevity of this equipment depend on careful maintenance. To maintain the best performance, the following periodic inspections are highly recommended. (1) Keep the power supply voltage within the specified value (19-35Vdc). (2) Know the condition of normal status when the equipment is properly functioning. Keep comparing the current status to the normal status to immediately detect any malfunctions. Do not attempt to check or repair the interior of this equipment by non-qualified service personnel, as doing so may cause fire, electric shock or malfunction. If any malfunctions are detected, contact our service center or agents. 6. 1 General Maintenance and Inspection Below are listed general maintaining and inspecting items, which can be done with usual tools and apparatus. No. Item Maintenance and inspection 1 Cleaning Gently clean the surface of the panel, knobs, …

Text truncated - open the document above for the full version.

Automatic Identification System JHS-183 Instruction Manual  7ZPJD0553  i  Preface Thank you for purchasing the JHS-183 Automatic Identification System (AIS). The JHS-183 is a Class A shipborne AIS equipment that communicates ship's static data and ship's dynamic data with other vessels or coast stations on VHF channels using TDMA techniques.  Be sure to read this manual before using the equipment.  Keep this manual near at hand for quick reference. ii  Before Operation Concerning the symbols This manual uses the following symbols to explain correct operation and to prevent injury or damage to property. The symbols and descriptions are as follows. Understand them before proceeding with this manual. Indicates a warning that, if ignored, may result in serious injury or even death. Indicates a caution that, if ignored, may result in injury or damage to property. Examples of symbols The ᘒ symbol indicates caution (including DANGER and WARNING). The illustration inside the ᘒ symbol specifies the content of the caution more accurately. (This example warns of possible electrical shock.) The symbol indicates that performing an action is prohibited. The illustration inside the symbol specifies the contents of the prohibited operation. (In this example disassembly is prohibited.) The ᙀ symbol indicates operations that must be performed. The illustration inside the ᙀ symbol specifies obligatory instructions. (In this example unplugging is the obligatory instruction.) Concerning warning labels A warning label is pasted to the top cover of this product. Do not remove, damage or modify the label.    iii  Handling Precautions Do not disassemble or customize this unit. Doing so may cause fire, electrical shock or malfunction. Do not use a voltage other than specified. Doing so may cause fire, electrical shock or malfunction. Do not attempt to check or repair the interior of this equipment by non-qualified service personnel, as doing so may cause fire, electric shock or malfunction. If any malfunctions are detected, contact our service center or agents. iv    Do not use this equipment for anything other than specified. Doing so may cause malfunction or damage to persons. Do not adjust the trimmer resistors or the trimmer capacitors on the PCB unit, except when and if they need to be adjusted. Doing so may cause malfunction or damage to persons. They are preset at the factory. Do not install this equipment in a place other than specified or in one with excessive humidity, steam, dust or soot. Doing so may cause fire, electric shock, malfunction or damage to persons. Do not get this equipment wet or spill any liquids on or near this equipment. Doing so may cause electrical shock or malfunction. Do not place this equipment anywhere vibration or impact is likely to occur. Doing so may cause a fall or damage to property and persons. Do not place anything on this equipment. Doing so may cause a fall, malfunction or damage to property and persons. Leave installation of this equipment to our service center or agents. Installation by an unauthorized person may happen to malfunction. Use this AIS equipment only as assisting device for collision avoidance. Also, the officer should make the final decision to maneuver by himself. v External Views NTE-183 AIS Transponder NCM-983 AIS Controller vi ⅘Optional equipment NQE-5183 Connection Box NBD-577C Power Supply Unit vii CONTENTS Preface ...............................................................................................................  Before Operation .................................................................................................  Handling Precaution ............................................................................................  External Views ....................................................................................................  1. GENERAL ..................................................................................................... 1-1 1.1 Outlines ....................................................................................................... 1-1 1.2 Features ...................................................................................................... 1-1 1.3 Components ................................................................................................ 1-2 1.3.1 Standard Components ............................................................................. 1-2 1.3.2 Options .................................................................................................... 1-2 1.3.3 Configuration ............................................................................................ 1-3 1.4 Outline ........................................................................................................ 1-4 2. INSTALLATION DIAGRAM ........................................................................... 2-1 3. PART NAMES AND FUNCTIONS ................................................................. 3-1 3.1 NCM-983 AIS Controller ............................................................................. 3-1 4. DISPLAYS ..................................................................................................... 4-1 5. OPERATION ................................................................................................. 5-1 5.1 Menu Tree ................................................................................................... 5-1 5.2 Basic Operation .......................................................................................... 5-2 5.2.1 Turning ON the power................................................................................ 5-2 5.2.1.1 Other Ships List ...................................................................................... 5-4 5.2.1.2 Other Ship’s Detail Information ............................................................... 5-5 5.2.1.3 Own Ship’s Detail Information.…

Text truncated - open the document above for the full version.

MarED The Group of Notified Bodies for the Implementation of the Marine Equipment Directive 14.11.2012 http://www.mared.org19:54 MarED Product Database Product Details Category:Navigation equipment Item number:A.1/4.32 Item designation:Universal automatic identification system equipment (AIS) Directive:2011/75/EU MED (7th Amendment) Product name:JHS-183 Product trade name:JHS-183 Restriction of use:none USCG MRA approval number:165.155/EC0168/BABT-MED000029 Comments to MRA recognition: MED Authorisation Details (modules B+D, B+E, B+F, G, H) Applied module(s):B+D Authorisation number:BABT-MED005702-H1 Date of authorisation:2012-10-09 Comments to authorisation: Date of withdrawal by applicant: Comments to withdrawal: Date of refusal by Notified Body: Comments to refusal: Certificate Details (type approval - module B) Certificate number:BABT-MED000029 Date of issue:2012-10-05 Date of validity:2017-10-04 Comments to certificate:none Notified body no. responsible for "Type B" certification: 0168 Applicant Details Applicant:Japan Radio Company., Ltd Applicant address:1-1 Shimorenjaku 5-Chome, Mitaka-Shi 181-8510 Tokyo Japan Applicant communication:Phone: "+44 (0)1306 631180 Fax: Email: [email protected] Url: http:// Notified Body Details Notified Body:TÜV SÜD BABT Notified Body address:Forsyth House KT12 2TD Walton-on-Thames, Surrey United Kingdom Notified Body communication:Phone: +44 (0) 1932 251200 Fax: +44 (0) 1932 251201 Email: [email protected] Url: http://www.babt.com/ Please note, that the information provided has been prepared accurately and to the best knowledge. However, the information is indicative only. There is no guarantee for completeness, actuality or an absolute correctness. For further clarification, please contact the indicated Notified Bodies or the companies offering the products to the market directly. Page 1 of 1MarED - Marine Equipment Directive 11/14/2012http://www.mared.org/print_database.phtml?product_id=ZWMyOzJhZDI3MjRoPjM%3 ...

RE 2012-3024.txt; JHS-183 Class A AIS Type Approval.txt From: [email protected] on behalf of Martin, Raymond [[email protected]] Sent: Wednesday, November 14, 2012 2:14 PM To: [email protected]; [email protected] Subject: RE: 2012-3024; JHS-183 Class A AIS Type Approval Attachments: USCG NVIC 08-04 CH 1.pdf; JHS-183 MarED Listing.pdf Dear Mr. Sanders and Mr. Pratt, The JRC JHS-183 Class A AIS received USCG type approval when it was reviewed by TÜV SÜD BABT last month. This was done under the US - European Commission (EC) Mutual Recognition Agreement (MRA). This agreement came into force in 2004 and I have attached our guidance on it if you're curious. The JHS-183's USCG approval number, 165.155/EC0168/BABT-MED000029, should be on the certificates TÜV SÜD BABT provided you and should be used on the unit's label. I confirmed that the JHS-183 is listed on the MarED database and that the USCG type approval is also indicated (copy attached). If you have any questions, please call or write. Best regards, Ray -----Original Message----- From: Martin, Raymond Sent: Wednesday, November 14, 2012 12:48 PM To: '[email protected]'; '[email protected]' Subject: 2012-3024; JHS-183 Class A AIS Type Approval Receipt Dear Mr. Sanders and Mr. Pratt, We have received your request and I will be processing it. We aim for a response time of 30 days or less; if you have not heard from us by then, or for any follow-up inquiries concerning this correspondence, please refer to the tracking number included in the subject line of this email. Respectfully, Raymond Martin Office of Design & Engineering Standards Systems Engineering Division (CG-ENG- 3) 2100 Second St SW Washington, DC 20593-7126 Phone: (202) 372-1384 Fax: (202) 372-1925 Page 1

NTE-183 AIS TRANSPONDER Front view Label view NCM-983 AIS CONTROLLER Front view CBD-2983 PS UNIT Rear view Label view NQE-5183 AIS CONNECTION BOX Front view Rear view

1-1 AIS JHS-183 ID LABEL Shipborne Automatic Identification System Model: JHS-183 Manufacturing Date: MM/YYYY FCC ID: CKEJHS-183 USCG ID: US Coast Guard Demo Canada ID: XXXXXX-YYYYYYY The device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Manufacturer: Japan Radio Company, Ltd. Fujisawa bldg. 30-16, Ogikubo 4-chome Suginami, Tokyo 167-8540, Japan

NTE-183 AIS TRANSPONDER CAG-2180A LNA UNIT CMN-2183 TRX UNIT CBD-2183 PS UNIT CDJ-2483 CONTROL UNIT NCM-983 AIS CONTROLLER CDJ-2983 CONTROL UNIT CBD-2983 PS UNIT CQD-2983 IF UNIT

Document 75918046 Report 01 Issue 3 October 2012 Report On Radio Approval Testing of the JRC JHS-183 Class A AIS Transceiver In accordance with IEC 61993-2 TÜV SÜD Product Service Ltd, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuvps.co.uk Document 75918046 Report 01 Issue 3 Page 1 of 179 REPORT ON Radio Approval Testing of the JRC JHS-183 Class A AIS Transceiver In accordance with IEC 61993-2 Document 75918046 Report 01 Issue 3 October 2012 PREPARED FOR Japan Radio Co., Ltd. 1-1 Shimorenjaku 5 Chome Mitaka-Shi Tokyo 181-8510 Japan PREPARED BY N Forsyth Product Specialist APPROVED BY M Jenkins Authorised Signatory DATED 11 October 2012 This report has been up-issued to Issue 3 to correct typographical errors. Document 75918046 Report 01 Issue 3 Page 2 of 179 CONTENTS Section Page No 1 REPORT SUMMARY ................................................................................................................... 4 1.1 Introduction .................................................................................................................................... 5 1.2 Brief Summary of Results .............................................................................................................. 6 1.3 Declaration of Build Status ............................................................................................................ 8 1.4 Product Information ....................................................................................................................... 9 1.5 Deviations from the Standard ...................................................................................................... 10 1.6 Modification Record ..................................................................................................................... 10 2 TEST DETAILS .......................................................................................................................... 11 2.1 Operating Modes / Capability ...................................................................................................... 12 2.2 Multiple Slot Messages ................................................................................................................ 21 2.3 Information Content ..................................................................................................................... 23 2.4 Reporting Rates ........................................................................................................................... 25 2.5 Security ........................................................................................................................................ 33 2.6 Initialisation Period ....................................................................................................................... 34 2.7 Channel Selection ........................................................................................................................ 35 2.8 Transceiver Protection ................................................................................................................. 37 2.9 Alarms and Indicator, Fall-back Arrangements ........................................................................... 38 2.10 Display and Control ..................................................................................................................... 49 2.11 TDMA Synchronisation ................................................................................................................ 53 2.12 Time Division (Frame Format) ..................................................................................................... 56 2.13 Synchronisation Jitter .................................................................................................................. 57 2.14 Data Encoding (Bit Stuffing) ........................................................................................................ 59 2.15 Frame Check Sequence .............................................................................................................. 60 2.16 Slot Allocation (Channel Access Protocols) ................................................................................ 61 2.17 Message Formats ........................................................................................................................ 70 2.18 Dual Channel Operation ............................................................................................................ 105 2.19 Regional Area Designation by VDL Message ........................................................................... 106 2.20 Regional Area Designation by Serial Message ......................................................................... 109 2.21 Power Setting ............................................................................................................................ 112 2.22 Message Priority Handling ......................................................................................................... 114 2.23 Slot Reuse (Link Congestion) .................................................................................................... 115 2.24 Management of Received Regional Operating Settings ........................................................... 116 2.25 Continuation of Autonomous Mode Reporting Rate .................................................................. 124 2.26 Addressed Messages ................................................................................................................ 125 2.27 Interrogation Responses............................................................................................................ 129 2.28 Other Non Periodic Messages ................................................................................................... 131 2.29 General ...................................................…

Text truncated - open the document above for the full version.

Document 75917591 Report 03 Issue 2 September 2012 Report On Type Approval Testing of the Japan Radio Co., Ltd. JHS-183 AIS In accordance with IEC 61993-2 TÜV SÜD Product Service Ltd, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuvps.co.uk Document 75917591 Report 03 Issue 2 Page 1 of 156 REPORT ON Type Approval Testing of the Japan Radio Co., Ltd. JHS-183 AIS Document 75917591 Report 03 Issue 2 September 2012 PREPARED FOR Japan Radio Co., Ltd. 1-1 Shimorenjaku 5 Chome Mitaka-Shi Tokyo 181-8510 Japan PREPARED BY R Hampton Principal Test Engineer APPROVED BY M Jenkins Authorised Signatory DATED 24 September 2012 This report has been up-issued to Issue 2 to correct typographical errors. Document 75917591 Report 03 Issue 2 Page 2 of 156 CONTENTS Section Page No 1 REPORT SUMMARY ................................................................................................................... 3 1.1 Introduction ................................................................................................................................... 4 1.2 Test Site ........................................................................................................................................ 5 1.3 Brief Summary of Results ............................................................................................................. 5 1.4 Declaration of Build Status ........................................................................................................... 7 1.5 Product Information ...................................................................................................................... 8 1.6 Deviations From The Standard ................................................................................................... 12 1.7 Modification Record .................................................................................................................... 13 2 TEST DETAILS .......................................................................................................................... 14 2.1 Environmental Tests - Dry Heat - Storage Test ......................................................................... 15 2.2 Environmental Tests - Dry Heat - Functional Test ..................................................................... 18 2.3 Environmental Tests - Damp Heat ............................................................................................. 21 2.4 Environmental Tests - Low Temperature Functional Tests ........................................................ 25 2.5 Environmental Tests - Vibration ................................................................................................. 30 2.6 Environmental Tests - Rain and Spray ....................................................................................... 40 2.7 Environmental Tests - Corrosion (Salt Mist) ............................................................................... 41 2.8 Operational Tests - Channel Selection ....................................................................................... 42 2.9 TDMA Transmitter - Frequency Error ......................................................................................... 51 2.10 TDMA Transmitter - Carrier Power ............................................................................................. 54 2.11 TDMA Transmitter - Modulation Spectrum 25 kHz Channel Mode ............................................ 57 2.12 TDMA Transmitter - Transmitter Attack Time ............................................................................. 62 2.13 TDMA Transmitter - Transmitter Release Time ......................................................................... 77 2.14 TDMA Receivers - Sensitivity – 25 kHz Operation ..................................................................... 82 2.15 TDMA Receivers - Error Behaviour at High Input Levels ........................................................... 85 2.16 TDMA Receivers - Co-Channel Rejection – 25 kHz Operation .................................................. 88 2.17 TDMA Receivers - Adjacent Channel Selectivity – 25 kHz Operation ....................................... 92 2.18 TDMA Receivers - Spurious Response Rejection ...................................................................... 98 2.19 TDMA Receivers - Intermodulation Response Rejection and Blocking ................................... 104 2.20 TDMA Receivers - Transmit to Receive Switching Time .......................................................... 107 2.21 DSC Receiver - Maximum Sensitivity ....................................................................................... 110 2.22 DSC Receiver - Error Behaviour at High Input Levels ............................................................. 113 2.23 DSC Receiver - Co-Channel Rejection .................................................................................... 115 2.24 DSC Receiver - Adjacent Channel Selectivity .......................................................................... 118 2.25 DSC Receiver - Spurious Response Rejection ........................................................................ 121 2.26 DSC Receiver - Intermodulation Response Rejection ............................................................. 124 2.27 DSC Receiver - Blocking or Desensitisation ............................................................................ 127 2.28 Spurious Emissions from the Receiver ..................................................................................... 130 2.29 Spurious Emissions from the Transmitter ................................................................................. 132 2.30 Excessive Conditions ................................................................................................................ 135 3 TEST EQUIPMENT USED ....................................…

Text truncated - open the document above for the full version.