Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 6 | 27 | 779.5 MHz - 784.5 MHz | 192.30 mW | 4M54W7D | 0.0093
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile or fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must not exceed a standalone maximum gain of 6dBi and 10dBi for band 4 and 13, and a collocated maximum gain of 6dBi and 6.5dBi for band 4 and13. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device supports 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 4; and 5 and 10 MHz bandwidth modes for LTE Band 13.
