D87-SG-ZIRC3502Z-Wave & Infra Red Remote Control

ZIRC-SD3502 Z-Wave AV / IR Remote Control 1 1 All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be edited, copied or circulated without prior written agreement by Sigma Designs. © 2012 Sigma Designs, Inc. ZIRC-SD3502 Z-Wave & IR Remote Control User’s Manual ZIRC-SD3502 Z-Wave AV / IR Remote Control 1 1 All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be edited, copied or circulated without prior written agreement by Sigma Designs. © 2012 Sigma Designs, Inc. CONTENTS 1. INTRODUCTION ..........................................................................................................................3 2. USAGE ........................................................................................................................................4 2.1 Z-Wave Network Overview .....................................................................................................4 2.2 Initial Inclusion .......................................................................................................................4 2.3 Audio Video control ................................................................................................................4 2.4 Low battery ............................................................................................................................7 2.5 Subsequent Inclusion/Exclusion ..............................................................................................7 2.6 Reset ......................................................................................................................................7 2.7 Enable Over-The-Air firmware upgrade ...................................................................................7 2.8 Send Node Info .......................................................................................................................8 2.9 Wake up .................................................................................................................................8 2.10 Update Associations ...............................................................................................................8 2.11 Test mode...............................................................................................................................8 2.11.1 Carrier frequency ................................................................................................................8 2.11.2 Response to HomeID 0 ........................................................................................................8 3. FCC NOTICE TO USERS .................................................................................................................9 4. EU DECLARATION OF CONFORMITY ........................................................................................... 10 ZIRC-SD3502 Z-Wave AV / IR Remote Control 1 1 All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be edited, copied or circulated without prior written agreement by Sigma Designs. © 2012 Sigma Designs, Inc. 1. INTRODUCTION ZiRC is a low cost Remote Control reference design based on the SD3502 for dual-mode, Z-Wave and InfraRed (IR), control of Sigma Designs Internet Television (IPTV) Set Top Boxes (STB). User feedback is through a tricolor LED (red, green, amber) located next to the power button. As a Z-Wave device it can interwork with any other Z-Wave certified device from any vendor. ZiRC can control the STB both in IR mode and in Z-Wave AV mode. The IR mode is using NEC format with a target address of 0xCB04. On first power up, the ZiRC is in Z-Wave AV (Audio Video) mode. While the IR mode can be used immediately, the ZiRC mode requires the remote to be included into the STB’s Home Area Network first. From time to time, this manual may refer to STB operations that are not covered in this document, but rather in the STB’s manual. Figure 1: ZiRC ZIRC-SD3502 Z-Wave AV / IR Remote Control 1 1 All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be edited, copied or circulated without prior written agreement by Sigma Designs. © 2012 Sigma Designs, Inc. 2. USAGE ZiRC is a low cost Remote Control reference design based on the SD3502 for dual-mode, Z-Wave and InfraRed (IR), control of Sigma Designs Internet Television (IPTV) Set Top Boxes (STB). User feedback is through a tricolor LED (red, green, amber) located next to the power button. As a Z-Wave device it can interwork with any other Z-Wave certified device from any vendor. 2.1 Z-Wave Network Overview Z-Wave® is an interoperable, lightweight wireless technology that empowers both consumers and manufacturers with an ecosystem of products that work together. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All constantly powered nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. 2.2 Initial Inclusion To start using a newly acquired ZiRC, set the STB into inclusion mode. Insert 2 AAA batteries as indicated in the battery compartment of the ZiRC. Any button press on the ZiRC will start learn mode. While in learn mode, the LED will blink amber every 3 seconds. After a few seconds, the LED should blink green 3 times on success or red on failure. Any button press would exit the inclusion mode with failure. After successful inclusion, the ZiRC waits 10 seconds for any association to be set up during which time the LED should blink amber every 3 seconds. If any association was successfully set up during this time, i…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

ZIRC-SD3502 FCC ID Label and Location ZIRC-SD3502 V1.0 P 1 of 2 30 Jul 2013 Sigma Designs, Inc ZIRC-SD3502 (Z-Wave 500 Series) FCC ID Label and Location Ver. 1.0 30 th July 2013 ZIRC-SD3502 FCC ID Label and Location ZIRC-SD3502 V1.0 P 2 of 2 30 Jul 2013 Sigma Designs, Inc 1 FCC LABEL WORDING, DIMENSIONS & LOCATION The Label will be printed on a WHITE Sticker with following wordings and logo:- The dimension of the WHITE Sticker is 27.0mm x 8.5mm. Please note that the black box is not part of the label. It is used to indicate the edge of the WHITE sticker. The WHITE Sticker will be stick onto the back casing of ZIRC as depicted in the diagrams below.

Page 2 Page 3 Page 4

FCC ID: D87-SG-ZIRC3502 Report No.: RF130710C01 Operational Description The transmitter of the EUT (Z-Wave & Infra Red Remote Control) is powered by 3Vdc from batteries. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF130710C01 1 of 39 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF130710C01 MODEL NO.: ZIRC FCC ID: D87-SG-ZIRC3502 RECEIVED: Jul. 10, 2013 TESTED: Jul. 19 ~ Aug. 17, 2013 ISSUED: Aug. 19, 2013 APPLICANT : Sigma Designs, Inc ADDRESS : 1778 McCarthy Blvd., Milpitas, California, United States, 95035 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130710C01 2 of 39 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION ......................................................................................................................... 4 2. SUMMARY OF TEST RESULTS ................................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 5 3. GENERAL INFORMATION ......................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 6 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................. 8 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 10 4. TEST TYPES AND RESULTS .................................................................................................... 11 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ............................................................... 11 4.1.2 TEST INSTRUMENTS .............................................................................................................. 12 4.1.3 TEST PROCEDURES ............................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ..................................................................................... 13 4.1.5 TEST SETUP ............................................................................................................................ 14 4.1.6 EUT OPERATING CONDITIONS .............................................................................................. 14 4.1.7 TEST RESULTS ........................................................................................................................ 15 4.2 BAND EDGE MEASUREMENT ................................................................................................ 27 4.2.1 LIMITS OF BAND EDGE MEASUREMENT .............................................................................. 27 4.2.2 TEST INSTRUMENTS .............................................................................................................. 28 4.2.3 TEST PROCEDURES ............................................................................................................... 29 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................................... 29 4.2.5 TEST SETUP ............................................................................................................................ 30 4.2.6 EUT OPERATING CONDITIONS .............................................................................................. 30 4.2.7 TEST RESULTS ........................................................................................................................ 31 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................................... 37 6. INFORMATION ON THE TESTING LABORATORIES .............................................................. 38 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ...…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST