F6OH30NWIEBody Composition Analyzer

2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: InBody Co., Ltd. Address: InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA Product Name: Body Composition Analyzer FCC ID: F6OH30NWIE Model(s): H30NWiE 2.911(d)(5)(i) Equipment Type We, InBody Co., Ltd. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Min seok, Lee Date: July 15, 2024 Title and Company name: Manager / InBody Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: InBody Co., Ltd. Address: InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA Product Name: Body Composition Analyzer FCC ID: F6OH30NWIE Model(s): H30NWiE 2.911(d)(5)(ii) Applicant filing We, InBody Co., Ltd. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Min seok, Lee Date: July 15, 2024 Title and Company name: Manager / InBody Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process Company name: InBody Co., Ltd. Address: InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA Product Name: Body Composition Analyzer FCC ID: F6OH30NWIE Model(s): H30NWiE 2.911(d)(7) USA Designated Agent for Service of Process We, InBody Co., Ltd. (“the applicant”) designate BIOSPACE Inc. DBA InBody NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. 2.911 (d)(7)USA Agent v1.3 USA Agent Company name: BIOSPACE Inc. DBA InBody Address: 13850 Cerritos Corporate Dr., Unit C, Cerritos, 90703, California, USA FCC Grantee Code: 2BC76 FRN No.: 0033752262 Contact Name: ByungJae, Yoo Telephone No: 1-323-932-6503 Email: [email protected] Applicant Company name: InBody Co., Ltd. Address: InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA FCC Grantee Code: F6O FRN No.: 0021623137 Contact Name: Min seok, Lee Telephone No: 82-02-2182-8918 Email: [email protected] Signature: Title: Quality Control Manager Signature: Title: Manager Date: July 15, 2024 Date: July 15, 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 15, 2024 Subject; Request for Confidentiality FCC ID: F6OH30NWIE To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Min seok, Lee Title: Manager

Letter of Authorization Company : InBody Co., Ltd. Address : InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA Product Name : Body Composition Analyzer Model Number : H30NWiE FCC Identifier : F6OH30NWIE We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Min seok, Lee Date: July 15, 2024 Title: Manager Signature of applicant

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED LABEL The shall be permanently affixed in the rear side of the equipment

Page 1 of 59 Report No. OT-247-RFD-002 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) FCC SAR Test Report Test Report No. : OT-247-RFD-002 Reception No. : 2404001329 Applicant : InBody Co., Ltd. Address : InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul, 06106, South Korea Manufacturer : InBody Co., Ltd. Address : 15, Heugam-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do 31025 KOREA Type of Equipment : Body Composition Analyzer FCC ID : F6OH30NWIE Model Name : H30NWiE Multiple Model Name: N/A Serial number : Refer to DUT Information Total page of Report : 59 pages (including this page) Date of Incoming : May 03, 2024 Date of Test : Jun. 11, 2024 Date of issue : Jul. 03, 2024 SUMMARY The equipment complies with the regulation; CFR §2.1093. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Tested by Young Chan, Lee / Engineer ONETECH Corp. Reviewed by Kyoung Hoo, Min / Senior Manager ONETECH Corp Approved by Cheon Sig, Choi / Technical Manager ONETECH Corp. Page 2 of 59 Report No. OT-247-RFD-002 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision history Report No. Reason for Change Date Issued OT-247-RFD-002 Initial release 2024-07-03 Page 3 of 59 Report No. OT-247-RFD-002 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) TABLE OF CONTENTS 1. Summary of Maximum SAR Value ............................................................................ 4 2. Device Under Test .................................................................................................... 4 3. INTRODUCTION ...................................................................................................... 7 4. DOSIMETRIC ASSESSMENT .................................................................................. 9 5. TEST CONFIGURATION POSITIONS ................................................................... 10 6. RF EXPOSURE LIMITS .......................................................................................... 11 7. FCC MEASUREMENT PROCEDURES .................................................................. 12 8. RF CONDUCTED POWERS .................................................................................. 13 9. SYSTEM VERIFICATION ....................................................................................... 14 10. SAR TEST DATA SUMMARY ................................................................................. 15 11. EQUIPMENT LIST .................................................................................................. 16 12. MEASUREMENT UNCERTAINTIES ...................................................................... 17 13. CONCLUSION ........................................................................................................ 18 14. REFERENCES ....................................................................................................... 19 APPENDIX A: SYSTEM VERIFICATION ................................................................................... 21 APPENDIX B: SAR TEST DATA ............................................................................................... 23 APPENDIX C: PROBE & DIPOLE ANTENNA CALIBRATION .................................................. 25 APPENDIX D: SAR TISSUE SPECIFICATIONS ....................................................................... 54 APPENDIX E: SAR SYSTEM VALIDATION .............................................................................. 56 APPENDIX F: DUT ANTENNA DIAGRAM & SAR TEST SETUP PHOTOGRAPHS ................. 57 Page 4 of 59 Report No. OT-247-RFD-002 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. Summary of Maximum SAR Value Equipment Class Band & Mode Tx Frequency[㎒] SAR 1 g Head (W/㎏) 1 g Body (W/㎏) 10g Limbs (W/㎏) DTS WLAN 2.4 ㎓ 2 412 ~ 2 462 N/A N/A 0.025 DTS Bluetooth LE 2 402 ~ 2 480 N/A N/A 0.010 Simultaneous SAR per KDB 690783 D01v01r03: N/A N/A 0.035 Note: 1. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for controlled environment/professional population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 6 of this report. 2. Device Under Test 2.1. DUT Information DUT Type Body Composition Analyzer FCC ID F6OH30NWIE Model Name H30NWiE Additional Model Name(s) - DUT S/N #1 Antenna Type WIFI: PCB Antenna Bluetooth: Chip Antenna DUT Stage Identical Prototype Note: 1. For antenna peak gain and detailed antenna information, refer to the antenna report in FCC filing. 2.2. Device Overview Band & Mode Operating Modes Tx Frequency [㎒] WLAN 2.4 ㎓ Data 2 412 ~ 2 462 Bluetooth LE Data 2 402 ~ 2 480 2.3. Power Reduction for SAR There is no power reduction used for any band/mode implemented in the device for SAR purposes. Page 5 of 59 R…

Text truncated - open the document above for the full version.

Appendix Data 1. DUTY CYCLE ........................................................................................................................................... 2 2. MIMIMUM 6 DB BANDWIDTH ............................................................................................................ 4 3. 99% OCCUPIED BANDWIDTH ........................................................................................................... 7 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................ 10 5. 100 KHZ BANDWIDTH OUTSIDE THE FREQUENCY BAND ...................................................... 13 6. POWER SPECTRAL DENSITY ........................................................................................................... 19 7. RADIATED EMISSION(RESTRICTED BAND & HARMONIC) .................................................... 22 1 / 31 Test ItemNo.ModeChannel Duty Cycle 1 LE 1 Mbps 2440 Verdict Pass Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths 2 / 31 1 Duty Cycle 3 / 31 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths 6dB Bandwidth Verdict Pass Pass Pass 4 / 31 1 2 6dB Bandwidth 6dB Bandwidth 5 / 31 3 6dB Bandwidth 6 / 31 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 99% Occupied Bandwidth Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 7 / 31 1 2 99% Occupied Bandwidth 99% Occupied Bandwidth 8 / 31 3 99% Occupied Bandwidth 9 / 31 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Output Power Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 10 / 31 1 2 Output Power Output Power 11 / 31 3 Output Power 12 / 31 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 100 kHz Bandwidth Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 13 / 31 1 1.1 100 kHz Bandwidth 100 kHz Bandwidth 14 / 31 1.2 2 100 kHz Bandwidth 100 kHz Bandwidth 15 / 31 2.1 2.2 100 kHz Bandwidth 100 kHz Bandwidth 16 / 31 3 3.1 100 kHz Bandwidth 100 kHz Bandwidth 17 / 31 3.2 100 kHz Bandwidth 18 / 31 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Power Spectrul Density Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 19 / 31 1 2 Power Spectrul Density Power Spectrul Density 20 / 31 3 Power Spectrul Density 21 / 31 Bluetooth_LE 1Mbps 2402.0 F1 RestrictedBand Horizontal AVG 2402.0 F1 RestrictedBand Horizontal PEAK 22 / 31 2402.0 F1 RestrictedBand Vertical AVG 2402.0 F1 RestrictedBand Vertical PEAK 23 / 31 2480.0 F3 RestrictedBand Horizontal AVG 2480.0 F3 RestrictedBand Horizontal PEAK 24 / 31 2480.0 F3 RestrictedBand Vertical AVG 2480.0 F3 RestrictedBand Vertical PEAK 25 / 31 F1 X2 4804.0 Harmonic Horizontal PEAK F1 X2 4804.0 Harmonic Horizontal AVG 26 / 31 F1 X2 4804.0 Harmonic Vertical AVG F1 X2 4804.0 Harmonic Vertical PEAK 27 / 31 F2 X2 4880.0 Harmonic Horizontal AVG F2 X2 4880.0 Harmonic Horizontal PEAK 28 / 31 F2 X2 4880.0 Harmonic Vertical AVG F2 X2 4880.0 Harmonic Vertical PEAK 29 / 31 F3 X2 4960.0 Harmonic Horizontal AVG F3 X2 4960.0 Harmonic Horizontal PEAK 30 / 31 F3 X2 4960.0 Harmonic Vertical AVG F3 X2 4960.0 Harmonic Vertical PEAK 31 / 31

Page 1 of 21 Report No.: OT-247-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-247-RWD-005 Reception No. : 2404001329 Applicant : InBody Co., Ltd. Address : InBody Bldg., 625, Eonju-ro, Gangnam-gu, Seoul 06106 KOREA Manufacturer : InBody Co., Ltd. Address : 15, Heugam-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do 31025 KOREA Type of Equipment : Body Composition Analyzer FCC ID. : F6OH30NWIE Model Name : H30NWiE Multiple Model Name : N/A Serial number : N/A Total page of Report : 21 pages (including this page) Date of Incoming : April 30, 2024 Date of issue : July 15, 2024 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Yun-Bok, Wi / Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 21 Report No.: OT-247-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. TEST SUMMARY .............................................................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 6 2.4 PURPOSE OF THE TEST ................................................................................................................................................... 6 2.5 TEST METHODOLOGY .................................................................................................................................................... 6 2.6 TEST FACILITY ............................................................................................................................................................... 6 3. GENERAL INFORMATION ............................................................................................................................................ 7 3.1 PRODUCT DESCRIPTION ................................................................................................................................................. 7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 7 4. EUT MODIFICATIONS .................................................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION ............................................................................................................................... 8 5.1 JUSTIFICATION ............................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT .............................................................................................................................................. 8 5.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 9 5.4 CONFIGURATION OF TEST SYSTEM ............................................................................................................................. 10 5.5 ANTENNA REQUIREMENT ............................................................................................................................................ 10 6. PRELIMINARY TEST .................................................................................................................................................... 10 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 10 6.2 GENERAL RADIATED EMISSIONS TESTS ..................................................................................................................... 10 7. MINIMUM 6 DB BANDWIDTH .................................................................................................................................... 11 7.1 OPERATING ENVIRONMENT ......................................................................................................................................... 11 7.2 TEST SET-UP ................................................................................................................................................................. 11 7.3 MEASUREMENT UNCERTAINTY ................................................................................................................................... 11 7.4 TEST DATE ..................................................................................................................................…

Text truncated - open the document above for the full version.

`Dielectric Chip Antenna Ver 1.4 - 1 - ParameterLWTAB Value[mm]2.01.21.00.60.3 B B PCB Soldering Land Dimension A C 1 2 ParameterABC Value[mm]2.10.50.5 Unless Specified tolerances are ± 0.05 mm ■ P/N : DSBTPTR2010 ■ AntennaDimension (unit : mm, tolerance : ± 0.05) This specification covers the dielectric chip antenna DSBTPTR2010 used in Bluetooth. w L T A B Chip Antenna Dimension Chip Antenna Soldering Pad Dimension B ■ Reference PCB Land Pad Pad1Pad2 FeedingGND ` Dielectric Chip Antenna - 2 - ■ AutoCAD Drawing of Reference PCB Design `Dielectric Chip Antenna Ver 1.4 - 3 - ■ PCB Drawing Top View 1 2 No Ground Region Ground Region0.5mm Feed Line 1005 Series Via 2 1 Bottom View No Ground Region Ground Region <Equivalent Circuit> ■ Matching Value Band (MHz)Matching Value (Default) Bluetooth / (2400 ~ 2485) Connector N/C Ant. 15pF 2.2nH N/C `Dielectric Chip Antenna Ver 1.4 - 4 - ■ Electrical Characteristics (3D) SWR & Smith chart3D Peak [dBi] Average [dBi] Efficiency [%] 2400MHz2.15-1.8166.05 2425MHz3.70-0.3692.07 2445MHz3.64-0.7584.23 2465MHz3.65-0.8183.17 2485MHz3.06-1.4272.19 ■ Radiation Pattern (3D) 3D Radiation Pattern `Dielectric Chip Antenna Ver 1.4 - 5 - ■ Electrical Characteristics (2D) 2D Measurement Gain Azimuth Theta Peak1.81 Average0.08 Phi Peak-9.76 Average-12.64 Elevation 1 Theta Peak2.18 Average-2.68 Phi Peak3.50 Average-1.60 Elevation 2 Theta Peak-13.75 Average-18.88 Phi Peak3.60 Average-0.73 Azimuth PlaneElevation1 PlaneElevation2 Plane ThetaVertical field of measured plane PhiHorizontal field of measured plane `Dielectric Chip Antenna Ver 1.4 - 6 - ThetaPhi Azimuth Elevation1 Elevation2 ■ Radiation Pattern (2D)