FDI-09102034-1AirStation Wireless-N NFINITI HighPower Keychain USB 2.0 Adapter

WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual1 Contents Chapter 1 - Product Overview .........................................4 Features ..................................................................................4 300 Mbps High Speed Mode ...................................................4 System Requirements .............................................................5 Package Contents ...................................................................5 Hardware Overview .................................................................5 Chapter 2 - Installation .....................................................6 Installing Wireless Drivers .......................................................6 Installing Utility ........................................................................10 Chapter 3 - Connect to a Wireless Network ...................13 Automatic Secure Setup (AOSS/WPS (PBC) ) .......................13 Windows 7/Vista (Client Manager V) .............................................14 Windows XP/2000 (Client Manager 3) ...........................................15 Automatic Secure Setup (WPS (PIN) ) ...................................16 Windows 7/Vista (Client Manager V) .............................................16 Windows XP (Client Manager 3) ....................................................20 Manual Setup (Client Manager) ..............................................22 Windows 7/Vista (Client Manager V) .............................................22 Windows XP/2000 (Client Manager 3) ...........................................25 Windows Vista (WLAN AutoConfig) ...............................................27 Windows XP (Wireless Zero Configuration) ...................................30 WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual2 Chapter 4 - Client Manager ..............................................31 Software Overview ..................................................................31 Using Client Manager V for Windows 7/Vista .........................31 Opening and Closing Client Manager ............................................31 Main Screen ...................................................................................32 Automatic Secure Setup and Advanced Setup ..............................33 SSID / WPS-PIN selection .............................................................34 Searching Wireless Access Points .................................................35 Wireless Network Information ........................................................36 WPS-PBC / AOSS selection ..........................................................37 Wireless Status ..............................................................................38 Wireless LAN Diagnostic ...............................................................40 Profile List ......................................................................................41 Wireless Properties ........................................................................42 Network Properties ........................................................................43 Browser Properties ........................................................................44 Printer Properties ...........................................................................45 Using Client Manager 3 with Windows XP / 2000 ...................46 Status .............................................................................................47 Scan ...............................................................................................49 Connect ..........................................................................................50 Profiles ...........................................................................................51 Profile Information (Basic) ..............................................................52 Profile Information (Network) .........................................................54 Profile Information (Browser) .........................................................55 Profile Information (Printers) ..........................................................56 System Tray Menu .........................................................................57 Option Menu ..................................................................................58 WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual3 Chapter 5 - Trouble Shooting ..........................................60 The Computer does not recognize the WLI-UC-G300HP Wireless Adapter. ...................................................................................60 Cannot connect to the network wirelessly. ..............................60 You forgot the AP's SSID, Encryption KEY, or Password. .......60 The link speed is slower than 300 Mbps (Maximum link speed is only 144Mbps). ........................................................................61 Other Tips ................................................................................61 Appendix .....................................................................64 300 Mbps Mode settings .........................................................64 Specifications ..........................................................................65 Removing the device from the computer ................................66 Windows Vista/XP ..........................................................................66 Windows 2000 ...............................................................................66 Uninstalling the Software ........................................................66 Uninstalling the Drivers ...........................................................66 TCP/IP Settings in Windows ...................................................67 Windows 7 .....................................................................................67 Windows Vista ...............................................................................68 Windows XP ...........................…

Text truncated - open the document above for the full version.

Chapter 4 Client Manager WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual51 Profiles Connect to an access point or edit a profile. ParameterMeaning ConnectSelecting a profile and clicking this button will connect to an access point using a stored profile. AddClick this to add a new profile. It will display the Profiles Information screen (page 52). EditClick this to edit or delete information in a profile. WPS AOSSClick this button to have AOSS/WPS (PBC) automatically set security. After connection, a profile based on these settings will be created. 802.1x ProfilesThis button is displayed when Client Manager is operating in Business Mode. Click to configure 802.1x authentication. WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual52 Chapter 4 Client Manager Profile Information (Basic) Configure your profile settings. ParameterMeaning Display IconSelect an icon to display on the profile from the list. Select ProfileConnection may be wireless or wired (Ethernet). For use with the AirStation, select Wireless. Profile NameEnter a name for the profile. Network TypeSelect infrastructure mode to connect to an access point (recommended), or ad-hoc mode to connect directly to another wireless client. SSIDSelect the SSID of the wireless access point that the profile will connect to. ChannnelChoose the wireless channel. In Infrastructure Mode, the channel is automatically configured. Chapter 4 Client Manager WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual53 ParameterMeaning Encryption MethodSelect the encryption method used by the wireless access point. Transmission KeyIf WEP is used for the Encryption Method, 4 passphrases may be entered. Use of the first (at least) is recommended. Encryption KeyEnter the encryption key (passphrase) for the access point. AP is set to exclusive connectionCheck if the access point’s SSID is not broadcast. WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual54 Chapter 4 Client Manager Profile Information (Network) The profile’s IP address and subnet mask may be manually assigned. ParameterMeaning Do not change IP Address settings of this Profile Check to keep using current TCP/IP network settings. Automatically acquire the IP AddressCheck to automatically acquire the IP address from a DHCP server when connecting wirelessly. Automatically acquire the DNS Server Address Check to automatically aquire the DNS server address from a DHCP server when connecting wirelessly. Chapter 4 Client Manager WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual55 Profile Information (Browser) Configure your Internet Explorer settings when connecting wirelessly. ParameterMeaning Do not change the browser settings of this Profile Check to use current Internet Explorer settings when connecting wirelessly. Uncheck to use any of the settings below. Address to use as Home PageTo use a different home page in Internet Explorer when connecting wirelessly, enter it here. Use the Proxy ServerTo use a proxy server for Internet Explorer when connecting wirelessly, enter its IP address and a port number and check the box. Do not use the proxy server for a local address If checked, the proxy server will not be used for local addresses. WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual56 Chapter 4 Client Manager Profile Information (Printers) Configure the printer that your computer uses when connected wirelessly. ParameterMeaning Do not change the printer settings of this Profile Select this option to use a different printer when connecting wirelessly. Chapter 4 Client Manager WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual57 System Tray Menu Right-click on the Client Manager icon in the system tray to display the following choices. ParameterMeaning StatusDisplays the Status screen (page 47). ScanDisplays the Scan screen (page 49). ProfileDisplays the Profiles screen (page 51). Easy ConnectionRuns Automatic Secure Setup, using one of the following connection methods: AOSS, WPS(PBC), or WPS(PIN). HelpDisplays Client Manager Help. OptionDisplays the Options menu screen (page 58). Version InformationDisplays Client Manager version information. ExitExits Client Manager. WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual58 Chapter 4 Client Manager Option Menu Configure Client Manager options. ParameterMeaning ModeSwitch between Client Manager’s operating modes. If you select “Business Mode”, the button to configure 802.1x authentication appears on the Profiles screen (Page 51). “Home Mode” is recommended. LockIf you click this, you will not be able to add new profiles or edit existing profiles. To lock or unlock, enter the password (8 - 63 characters). Export a profileClick this to save the currently registered profile information. To save profile information, enter the password ( 8 - 63 characters). Import a profileClick this to import a saved profile into Client Manager. You’ll need to enter the password for the profile to continue. Chapter 4 Client Manager WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual59 ParameterMeaning Initialize profileClick this to initialize profile information. Before initializing profile information, unlock the unit. Use the following network adapterSelect a network adaptor to use in Client Manager. “ Wireless Adapter Auto-select” is recommended for most users. Automatically connect to the profile with highest priority If checked, it will attempt to connect to the profile with highest priority as assigned on the Profile screen (page 51). Checked is recommended for most users. WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual60 Chapter 5 - Trouble Shooting The Computer does not recognize the WLI-UC- G300HP Wireless Adapter. • Make sure this unit is connected to a USB port on your computer. • If your computer has multiple USB ports, connect to a different USB port. • Refer to page 7 "Install Wireless Drivers", and reinstall drivers for this unit. Cannot connect to the network wirelessly. • Refer to chapter 3 to connect this unit to an access point wirelessly. • Configure the same SSID, encryption method, and encryption key for eac…

Text truncated - open the document above for the full version.

Search | RSS | Updates | E-Filing | Initiatives | Consumers | Find People Office of Engineering and Technology FCC > FCC E-filing > Inquiry System Home Page > Reply to OET Response FCC Site Map OET Home Page Site Options Basic KDB Search Advanced KDB Search Submit an Inquiry Reply to an Inquiry Response Category List FAQ Search Draft Laboratory Division Publications Draft Laboratory Division Publications (Expired) Draft Publication Moderation Policy Related Sites Equipment Authorization Presentations Equipment Authorization System (EAS) Telecommunications Certification Bodies (TCB) Reply to an OET Inquiry Response Currently Display Inquiry Tracking Number: 429815 Contact Information: Customer First Name: Cody Customer Last Name: Chang Telephone Number: 886-3-3183232 Extension: 1609 E-mail Address: [email protected] Address: Line 1:N/A Line 2: P.O. Box: City:N/A State: Zip Code: Country: Inquiry Details: First Inquiry Category: Radio Frequency Exposure - MPE; SAR Second Inquiry Category: Specific Absorption Rate Third Inquiry Category: Dear Sir/Madam, This product is an 802.11b/g/n 2Tx * 2Rx USB dongle with a swivel antenna, for this kind of product that need to submit a KDB inquiry to determine the SAR test requirements. The brief information is as the following: 1. FCC ID: FDI-09102034-1 2. Rule part: part 15 subpart C & part2 (2.1093) 3. Equipment Class: DTS ? Digital Transmission System 4. Test configuration: 802.11b/g/n product The design of this device is same as the equipment had got the grant (FCC ID: FDI-09102026-0) on 12/30/2008 and KDB inquiry number is 715914, they has same antenna and external design, only RF chipset is different from original. Could you accept we follow same procedure to perform SAR measurement? Or have any new SAR requirement for this kind of product? The SAR test configurations are show in the attachment (SAR proposal.pdf). Regards, Response(s): --OET response sent on Jun 9 2010 3:46PM-- Under the procedures outlined in KDB 447498 DO2 for USB dongles with swiveling antennas, a KDB inquiry should be submitted to determine applicable test configurations. The SAR Evaluate Positions, included in your submitted test positioning proposal for this KDB inquiry, is approved. This KDB number (429815) should be associated with FCC ID FDI-09102034-1. Enter any additional comments below: 第 1 頁，共 2 頁OET Inquiry System Reply to OET Response, Inquiry Tracking Number 429815 2010/7/1https://fjallfoss.fcc.gov/oetcf/kdb/forms/ReplyToResponse.cfm Dear Sir/Madam, This product is an 802.11b/g/n 2Tx * 2Rx USB dongle with a swivel antenna, for this kind of product that need to submit a KDB inquiry to determine the SAR test requirements. The brief information is as the following: 1. FCC ID: FDI-09102034-1 2. Rule part: part 15 subpart C & part2 (2.1093) 3. Equipment Class: DTS ? Digital Transmission System 4. Test configuration: 802.11b/g/n product The design of this device is same as the equipment had got the grant (FCC ID: FDI-09102026-0) on 12/30/2008 and KDB inquiry number is 715914, they has same antenna and external design, only RF chipset is different from original. Could you accept we follow same procedure to perform SAR measurement? Or have any new SAR requirement for this kind of product? The SAR test configurations are show in the attachment (SAR proposal.pdf). Regards, "> ProceedClear Please send any comments or suggestions for this site to OET Systems Support Federal Communications Commission 445 12th Street, SW Washington, DC 20554 More FCC Contact Information... Phone: 888-CALL-FCC (225-5322) TTY: 888-TELL-FCC (835-5322) Fax: 202-418-0232 E-mail: [email protected] - Privacy Policy - Web Policies & Notices - Customer Service Standards - Freedom of Information Act 第 2 頁，共 2 頁OET Inquiry System Reply to OET Response, Inquiry Tracking Number 429815 2010/7/1https://fjallfoss.fcc.gov/oetcf/kdb/forms/ReplyToResponse.cfm

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Label Location

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

FCC ID: FDI-09102034-1 Report No.: RF990520C09 Operational Description This device is an AirStation Wireless-N NFINITI HighPower Keychain USB2.0 Adapter, which operates in 2.4GHz band, the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 5Vdc from the host equipment The antenna is external printing antenna without antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA990520C09 1 Report Format Version 3.0.1 SAR TEST REPORT FCC ID: FDI-09102034-1 REPORT NO.: SA990520C09 MODEL NO.: WLI-UC-G300HP-V1 RECEIVED: Feb. 22, 2010 TESTED: Jun. 07 ~ Jun. 09, 2010 ISSUED: Jul. 01, 2010 APPLICANT: Buffalo Inc. ADDRESS: 15, Shibata Hondori 4-chome, Minami-ku, Nagoya 457-8520, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 27 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: SA990520C09 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION ................................................................................................................. 3 2. GENERAL INFORMATION ................................................................................................. 4 2.1 GENERAL DESCRIPTION OF EUT.................................................................................... 4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS ..................................................... 5 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ........................................................... 6 2.4 TEST EQUIPMENT .............................................................................................................9 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ........................ 10 3. DESCRIPTION OF SUPPORT UNITS.............................................................................. 13 4. RECIPES FOR TISSUE SIMULATING LIQUIDS .............................................................. 14 5. SYSTEM VALIDATION...................................................................................................... 19 5.1 TEST PROCEDURE ......................................................................................................... 19 5.2 VALIDATION RESULTS .................................................................................................... 20 5.3 SYSTEM VALIDATION UNCERTAINTIES ........................................................................ 21 6. TEST RESULTS ................................................................................................................22 6.1 TEST PROCEDURES ....................................................................................................... 22 6.2 CONDUCTED POWER ..................................................................................................... 24 6.3 DESCRIPTION OF TEST CONDITION............................................................................. 25 6.4 MEASURED SAR RESULT............................................................................................... 25 6.5 SAR LIMITS ...................................................................................................................... 26 7. INFORMATION ON THE TESTING LABORATORIES ...................................................... 27 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA990520C09 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: AirStation Wireless-N NFINITI HighPower Keychain USB2.0 Adapter MODEL: WLI-UC-G300HP-V1 BRAND: Buffalo APPLICANT: Buffalo Inc. TESTED: Jun. 07 ~ Jun. 09, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 The above equipment (model: WLI-UC-G300HP-V1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jul. 01, 2010 Ivy Lin / Specialist TECHNICAL ACCEPTANCE : , DATE:Jul. 01, 2010 Responsible for RF Mason Chang / Engineer APPROVED BY : , DATE:Jul. 01, 2010 Gary Chang / Assistant Manager Report No.: SA990520C09 4 Report Format Version 3.0.1 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT AirStation Wireless-N NFINITI HighPower Keychain USB2.0 Adapter MODEL NO. WLI-UC-G300HP-V1 FCC ID FDI-09102034-1 POWER SUPPLY 5Vdc MODULATION TYPE CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM TRANSFER RATE 802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps 802.11n: up to 300.0Mbps OPERATING FREQUENCY 2412 ~ 2462MHz NUMBER OF CHANNEL 11 for 802.11b, 802.11g, 802.11n (20MHz) 7 for 802.11n (40MHz) MAXIMUM SAR (1g) 1.090W/kg ANTENNA TYPE External printing antenna with 2.2dBi gain ANTENNA CONNECTOR NA DATA CABLE 0.19m Shielded USB cable without core I/O PORTS USB ACCESSORY DEVICES NA NOTE: 1. The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and two receivers. MODULATION MODE TX FUNCTION 802.11b 1TX 802.11g 1TX 802.11n (20MHz) 1TX/ 2TX 802.11n (40MHz) 1TX/ 2TX 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: SA990520C09 5 Report Format Version 3.0.1 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS According to the specifications of the manufacturer, this product must comply with the requirements of the follo…

Text truncated - open the document above for the full version.

D2: DOSIMETRIC E-FIELD PROBE D3: DAE

D4: SYSTEM VALIDATION DIPOLE

Date/Time: 2010/6/9 12:06:20 Test Laboratory: Bureau Veritas ADT Vertical front-11b-Ch1-180 degree DUT: AirStation Wireless-N NFINITI HighPower Keychain USB2.0 Adapter ; Type: WLI-UC-G300HP-V1 Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.93 mho/m; ε r = 54.3; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Separation distance : 5 mm (The Vertical front side of the EUT to the Phantom) DASY4 Configuration: - Probe: EX3DV4 - SN3590 ; ConvF(8.2, 8.2, 8.2) ; Calibrated: 2010/3/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861 ; Calibrated: 2010/1/22 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 80 ; Postprocessing SW: SEMCAD, V1.8 Build 186 Low Channel 1/Area Scan (4x11x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR (measured) = 1.23 mW/g Low Channel 1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.92 V/m; Power Drift = -0.128 dB Peak SAR (extrapolated) = 2.21 W/kg SAR(1 g) = 1.09 mW/g; SAR(10 g) = 0.536 mW/g Maximum value of SAR (measured) = 1.42 mW/g Date/Time: 2010/6/9 18:32:49 Test Laboratory: Bureau Veritas ADT Vertical front-11b-Ch1-180 degree-Step Size DUT: AirStation Wireless-N NFINITI HighPower Keychain USB2.0 Adapter ; Type: WLI-UC-G300HP-V1 Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.93 mho/m; ε r = 54.3; ρ = 1000 kg/m 3 Phantom section: Flat Section ; Separation distance : 5 mm (The Vertical front side of the EUT to the Phantom) DASY4 Configuration: - Probe: EX3DV4 - SN3590 ; ConvF(8.2, 8.2, 8.2) ; Calibrated: 2010/3/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861 ; Calibrated: 2010/1/22 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 80 ; Postprocessing SW: SEMCAD, V1.8 Build 186 Low Channel 1/Area Scan (10x31x1): Measurement grid: dx=5mm, dy=5mm Maximum value of SAR (measured) = 1.45 mW/g Low Channel 1/Zoom Scan(13x13x17)/Cube 0: Measurement grid: dx=2.5mm, dy=2.5mm, dz=1.5mm Reference Value = 10.18 V/m; Power Drift = 0.053 dB Peak SAR (extrapolated) = 2.15 W/kg SAR(1 g) = 1.095 mW/g; SAR(10 g) = 0.515 mW/g Maximum value of SAR (measured) = 1.46 mW/g

Report No.: RF990520C09 1 Report Format Version 3.0.1 FCC TEST REPORT FCC ID: FDI-09102034-1 REPORT NO.: RF990520C09 MODEL NO.: WLI-UC-G300HP-V1 RECEIVED: Feb. 22, 2010 TESTED: Apr. 19 ~ Jun. 02, 2010 ISSUED: Jun. 03, 2010 APPLICANT: Buffalo Inc. ADDRESS: 15, Shibata Hondori 4-chome, Minami-ku, Nagoya 457-8520, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 70 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF990520C09 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION........................................................................................................... 4 2. SUMMARY OF TEST RESULTS .................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY................................................................................ 5 3. GENERAL INFORMATION ........................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................... 7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 11 4. TEST TYPES AND RESULTS .................................................................................... 13 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 13 4.1.2 TEST INSTRUMENTS................................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 15 4.1.5 TEST SETUP.............................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 30 4.2.2 TEST INSTRUMENTS................................................................................................ 30 4.2.3 TEST PROCEDURES ................................................................................................ 31 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 31 4.2.5 TEST SETUP.............................................................................................................. 32 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 32 4.2.7 TEST RESULTS ......................................................................................................... 33 4.3 6dB BANDWIDTH MEASUREMENT.......................................................................... 35 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ...................................................... 35 4.3.2 TEST INSTRUMENTS................................................................................................ 35 4.3.3 TEST PROCEDURE................................................................................................... 35 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 35 4.3.5 TEST SETUP.............................................................................................................. 36 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 36 Repor…

Text truncated - open the document above for the full version.