FDI000000017AirStation

User Manual AirStation WI-U2-433DM WI-U2-300D www.buffalotech.com 3501xxxx-01 1 Contents Chapter 1 Product Overview ............................................3 System Requirements ..........................................................................3 Package Contents .................................................................................4 Hardware Overview .............................................................................4 Chapter 2 Installation ........................................................5 Installing Wireless Drivers ...................................................................5 Chapter 3 Connect to a Wireless Network .......................8 Windows 8 (WLAN AutoConfig) ..........................................................8 Windows 7 (WLAN AutoConfig) ..........................................................9 Windows Vista (WLAN AutoConfig) ..................................................11 Windows XP (Wireless Zero Configuration) .....................................13 Chapter 4 Trouble Shooting ............................................14 The Computer does not Recognize the Wireless Adapter. ..............14 You Cannot Connect to the Network Wirelessly. .............................14 You Forgot the AP’s SSID, Encryption Key, or Password. ................14 2 Chapter 5 Appendix ........................................................15 Specifications .....................................................................................15 WI-U2-433DM ................................................................................................15 WI-U2-300D ...................................................................................................16 Uninstalling the Drivers.....................................................................17 TCP/IP Settings ...................................................................................18 Windows 8 .....................................................................................................18 Windows 7 .....................................................................................................19 Windows Vista ...............................................................................................20 Windows XP ...................................................................................................21 3 Chapter 1 Product Overview System Requirements Computer should be IBM/PC compatible with a USB 2.0 port and a CD-ROM drive. Notes: This product does not support computers equipped with dual processors (computers with two physical CPUs). Computers with Dual-core CPU’s are supported. AirStation does not support Windows Vista (32-bit) standby mode. Compatible OS Windows 8 (64-bit or 32-bit), Windows 7 (64-bit or 32-bit), Windows Vista (64-bit or 32-bit), Windows XP (32-bit) Notes: Service Pack 2 or later is required for Windows XP. 4 Package Contents The following items are included with your AirStation. If any of the items are missing, please contact your vender. WI-U2-433DM • WI-U2-433DM................................................................................................................................... 1 • AirStation Driver CD....................................................................................................................... 1 • Quick Setup Guide.......................................................................................................................... 1 • Warranty Statement....................................................................................................................... 1 WI-U2-300D • WI-U2-300D....................................................................................................................................... 1 • AirStation Driver CD....................................................................................................................... 1 • USB cable............................................................................................................................................ 1 • Clip........................................................................................................................................................ 1 • Quick Setup Guide.......................................................................................................................... 1 • Warranty Statement....................................................................................................................... 1 Hardware Overview WI-U2-433DM 1 Activity LED (blue) Flashes when sending or receiving data. WI-U2-300D 1 Activity LED (blue) Flashes when sending or receiving data. 5 Chapter 2 Installation Installing Wireless Drivers Follow the instruction below to install drivers. Do not connect the AirStation to your computer yet. 1 Boot your computer and insert the AirStation Driver CD. The setup menu will launch automatically. If not, open the CD and click “Launcher.exe”. 2 Click [Install Driver]. 3 Click [Next]. 6 4 Read the license agreement, select [Agree], then click [Next]. 5 Check “Always trust software from “BUFFALO INC.”, and click [Install]. 6 When the screen below is displayed, attach the AirStation to your computer. Drivers will be installed automatically. 7 7 After the drivers are installed, the screen below will be displayed. Click [Finish]. Drivers are now installed. 8 Chapter 3 Connect to a Wireless Network Windows 8 (WLAN AutoConfig) With Windows 8, use WLAN AutoConfig to connect to the AirStation. 1 Switch Windows 8 to desktop mode. 2 Click on the network icon in the system tray. 3 Select the target AirStation’s name and click [Connect]. If you will be connecting to this device again, check [Connect automatically]. 4 Enter the encryption key and click [Next]. 9 5 Click [No, don’t turn on sharing or connect to devices]. Windows 7 (WLAN AutoConfig) With Windows 7, use WLAN AutoConfig to connect to the AirStation…

Text truncated - open the document above for the full version.

Regulatory Compliance Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instal- lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to oper- ate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. Federal Communication Commission (FCC) Radiation Exposure Statement: This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator & your body. SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop com- puter with USB slot. Other application like handheld PC or similar device has not been verified and may not comply with related RF exposure rule and such use shall be prohibited. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement: Industrie Canada déclaration: CAN ICES-3(B)/NMB-3(B) This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonc- tionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co- channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment: (i) le dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. IC Radiation Exposure Statement: Déclaration d’exposition aux radiations: This EUT is …

Text truncated - open the document above for the full version.

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch 香港商立德國際商品試驗有限公司 桃園分公司 No. 19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 33383, Taiwan TEL: 886-3-3183232 FAX: 886-3-3270892 http://www.adt.com.tw / E-mail: [email protected] Date: 2013-08-27 Re: Supersede request for FCC ID: FDI000000017; Granted on 08/05/2013 To Whom It May Concern: We regret to inform you that due to type wrong antenna gain, we have submitted the wrong Test Report (DFS), Test Report (DTS), Test Report (NII), User Manual (Statement) exhibit to the filing. To prevent misunderstanding to the public, we would like to request the FCC to supersede the exhibit described as Test Report (DFS)_rev2, Test Report (DTS)_rev, Test Report (NII)_rev, User Manual (Statement)_rev. If you have any questions, feel free to contact us. Thank you. Regards, Andrea Hsia Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 1628 Fax: 886-3-327 0892 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

WI-U2-433DM [US] Laser etching2013/07/12 BUFFALO INC. CONFIDENTIAL 100% 200% MAC Control code SN XXXXXXXXXXXX XXXX QR MADE IN CHINA MADE IN CHINA IC:6102A-053 FCC ID:FDI000000017 Model:WI-U2-433DM IC:6102A-053 FCC ID:FDI000000017 Model:WI-U2-433DM

Page 2 Page 3 Page 4 Page 5

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 26 Report No. : SA130410C05 Issued Date : Jul. 18, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130410C05 Applicant : BUFFALO INC. Address : Akamondori Bldg., 30-20, Ohsu 3-chome, Naka-ku, Nagoya 460-8315, Japan Product : AirStation FCC ID : FDI000000017 Brand : BUFFALO INC. Model No. : WI-U2-433DM Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 / KDB 447498 D02 v02 Date of Testing : Jun. 27, 2013 ~ Jul. 04, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 26 Report No. : SA130410C05 Issued Date : Jul. 18, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ............…

Text truncated - open the document above for the full version.

Report No.: RF130410C05-1 R1 1 of 79 Report Format Version 5.2.0 Cancels and replaces the report No.: RF130410C05-1 dated Jun. 11, 2013. FCC TEST REPORT (15.247) REPORT NO.: RF130410C05-1 R1 MODEL NO.: WI-U2-433DM FCC ID: FDI000000017 RECEIVED: Apr. 10, 2013 TESTED: May 28 ~ May 30, 2013 ISSUED: Aug. 23, 2013 APPLICANT: BUFFALO INC. ADDRESS: Akamon-dori Bldg, 30-20, Ohsu 3-chome, Naka-ku ,Nagoya 460-8315, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130410C05-1 R1 2 of 79 Report Format Version 5.2.0 Cancels and replaces the report No.: RF130410C05-1 dated Jun. 11, 2013. TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 5 1. CERTIFICATION .......................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 8 3.2 DESCRIPTION OF TEST MODES ............................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................ 11 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 15 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 16 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................ 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 17 4.1.2 TEST INSTRUMENTS ............................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 19 4.1.5 TEST SETUP ............................................................................................................. 20 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 20 4.1.7 TEST RESULTS ........................................................................................................ 21 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 34 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 34 4.2.2 TEST INSTRUMENTS ............................................................................................... 34 4.2.3 TEST PROCEDURES ............................................................................................... 35 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 35 4.2.5 TEST SETUP ............................................................................................................. 35 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 35 4.2.7 TEST RESULTS ........................................................................................................ 36 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 38 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 38 4.3.2 TEST SETUP ............................................................................................................. 38 4.3.3 TEST INSTRUMENTS ............................................................................................... 38 4.3.4 TEST PROCEDURE .................................................................................................. 38 4.3.5 DEVIATION FROM TEST STANDARD...........................................…

Text truncated - open the document above for the full version.

Report No.: RF130410C05 R1 1 of 78 Report Format Version 5.2.0 Cancels and replaces the report No.: RF130410C05 dated Jun. 11, 2013. FCC TEST REPORT (15.407) REPORT NO.: RF130410C05 R1 MODEL NO.: WI-U2-433DM FCC ID: FDI000000017 RECEIVED: Apr. 10, 2013 TESTED: May 28 ~ May 30, 2013 ISSUED: Aug. 23, 2013 APPLICANT: BUFFALO INC. ADDRESS: Akamon-dori Bldg, 30-20, Ohsu 3-chome, Naka-ku ,Nagoya 460-8315, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130410C05 R1 2 of 78 Report Format Version 5.2.0 Cancels and replaces the report No.: RF130410C05 dated Jun. 11, 2013. TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION .......................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 6 3. GENERAL INFORMATION .......................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................ 11 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................................. 13 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 14 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 15 4. TEST TYPES AND RESULTS ................................................................................................... 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................... 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT................................. 16 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ............................ 16 4.1.3 TEST INSTRUMENTS ............................................................................................................... 17 4.1.4 TEST PROCEDURES ............................................................................................................... 18 4.1.5 DEVIATION FROM TEST STANDARD ..................................................................................... 18 4.1.6 TEST SETUP ............................................................................…

Text truncated - open the document above for the full version.