FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Archtek Telecom Corporation/
  3. FI7BUB-103

FI7BUB-103BLUETOOTH USB DONGLE

Archtek Telecom Corporation
BLUETOOTH USB DONGLE - FCC ID FI7BUB-103 - Archtek Telecom Corporation
Click to zoom

Application Details

Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Date of Grant
Aug 25, 2003
Application Purpose
Original Equipment
Date of Application
Aug 25, 2003
Equipment Note
BLUETOOTH USB DONGLE
Frequency Range
2402.00000000 - 2480.00000000
Company
Archtek Telecom Corporation
Country
Taiwan

Documents & Files

Select a file to view

Users Manual

↗

Block Diagram

↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

Operational Description

↗

Schematics

↗

Test Report

↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

1 Version: 1.0 2 TABLE OF CONTENTS 1. Overview ............................................................................................................................... 4 1.1 FEATURES ............................................................................................................. 4 1.2 APPLICATION ....................................................................................................... 4 1.3 SPECIFICATION.................................................................................................... 5 2. Using BTW Software............................................................................................................ 6 2.1 BLUETOOTH SOFTWARE INSTALLATION ..................................................... 6 2.2 BLUETOOTH SOFTWARE UNINSTALLATION ............................................... 7 2.3 BLUETOOTH TRAY............................................................................................. 8 2.4 ACCESS MY BLUETOOTH PLACES ................................................................. 8 2.5 ICONS USED FOR BLUETOOTH DEVICES AND SERVICES ........................ 9 3. Basic Operations ..................................................................................................................11 3.1 START OR STOP BLUETOOTH.........................................................................11 3.2 CREATE A CONNECTION FROM THE BLUETOOTH ICON IN THE SYSTEM TRAY ............................................................................11 3.3 CREATE A CONNECTION USING THE BLUETOOTH SETUP WIZARD................................................................................................ 12 3.4 CREATE A CONNECTION FROM BLUETOOTH EXPLORER ..................... 12 3.5 FIND BLUETOOTH DEVICES .......................................................................... 12 3.5.1 Periodic Search for Devices ........................................................................... 12 3.6 FIND A SERVICE................................................................................................ 13 3.7 BLUETOOTH CONNECTION STATUS............................................................ 14 3.8 SEND TO BLUETOOTH ..................................................................................... 14 4. Configure Bluetooth............................................................................................................ 15 4.1 ACCESS THE BLUETOOTH CONFIGURATION PANEL .............................. 15 4.2 BLUETOOTH SERVICES VERSUS BLUETOOTH APPLICATIONS ................................................................................... 15 4.3 BLUETOOTH EXCHANGE FOLDER ............................................................... 16 4.4 GENERAL CONFIGURATION SETTINGS ...................................................... 16 4.5 BLUETOOTH APPLICATIONS ......................................................................... 16 4.5.1 Overview ........................................................................................................ 16 4.5.2 General Configuration.................................................................................... 17 4.5.3 Audio Gateway .............................................................................................. 17 4.5.4 Bluetooth Serial Port ...................................................................................... 18 4.5.5 Dial-up Networking ....................................................................................... 19 4.5.6 Fax.................................................................................................................. 20 4.5.7 Headset ........................................................................................................... 21 4.5.8 File Transfer ................................................................................................... 22 4.5.9 Network Access ............................................................................................. 23 4.5.10 PIM Synchronization ................................................................................... 24 4.5.11 PIM Item Transfer........................................................................................ 25 4.5.12 Printer........................................................................................................... 27 3 4.6 BLUETOOTH SERVICES................................................................................... 27 4.6.1 Notifications................................................................................................... 28 4.6.2 Audio Gateway .............................................................................................. 29 4.6.3 Bluetooth Serial Port ...................................................................................... 29 4.6.4 Dial-up Networking Service .......................................................................... 30 4.6.6 File Transfer Service ...................................................................................... 30 4.6.7 Headset Service.............................................................................................. 31 4.6.8 Network Access ............................................................................................. 31 4.6.8.1 Setup for Windows 98SE & Windows Me ......................................... 32 4.6.8.2 Setup for Windows 2000 and Windows XP ....................................... 32 4.6.9 PIM Item Transfer.......................................................................................... 32 4.6.10 PIM Synchronization ................................................................................... 34 4.7 HARDWARE SETTINGS.................................................................................... 35 4.7.1 Advanced Settings.......................................................................................... 36 4.8 ACCESSIBILITY SETTINGS ...............…

Text truncated - open the document above for the full version.

Block Diagram

5 5 4 4 3 3 2 2 1 1 DD CC BB AA BLUECORE2-EXT FUJISU 4MB FLASH BANDPASS FILTER,BALUN ANTENNA RF CHANNAL USB PC 16Mhz Clock <Doc><RevCode> BUB-103 A 11Tuesday, May 27, 2003 Title SizeDocument NumberRev Date:Sheet of

External Photos

FCC ID: FI7BUB-103 Number1 FRONT SIDE OF EUT FCC ID: FI7BUB-103 Number2 REAR SIDE OF EUT

Internal Photos

FCC ID: FI7BUB-103 Number 1 Mechanical construction FCC ID: FI7BUB-103 Number 2 Mechanical construction FCC ID: FI7BUB-103 Number 3 Front side of main board FCC ID: FI7BUB-103 Number 4 Rear side of main board

Operational Description

Schematic BC212015-ds-001e Production Information Page 1 of 4 _äìÉ`çêÉ ä OJbñíÉêå~ä Product Data Sheet 1 Schematic C113p3 C1210p C415p 1V8 C1047p 1V8 1V8 1V8 3V3 XT116MHz TSX-10 C15 220p (COG) R3180k C510n C910n C1647n C142u2 VIN 1 GND 2 CE 3 BYP 4 VOUT 5 U3XC6209B182MR 1V8 3V3 3V3 L23n9L33n9 C21p8 C31p8 L13n9 C115p 1V8 1 2 34 5 6 T1HHM-1517 T2 1 GND 2 GND 3 T1 4 F1MDR741F C710n R22R2 VDD_PIO A1 VSS_PIO A2 PIO[5] A3 SPI_CSB A4 SPI_MOSI A5 USB_D- A6 USB_D+ A7 VDD_CORE A8 VSS_CORE A9 VDD_PADS A10 VSS_PADS A11 PIO[4] B1 PIO[3] B2 PIO[2] B3 SPI_MISO B4 SPI_CLK B5 UART_CTS B6 UART_RTS B7 PCM_CLK B8 PCM_OUT B9 PCM_IN B10 PCM_SYNC B11 PIO[0] C1 PIO[1] C2 PIO[6] C3 PIO[9] C4 PIO[10] C5 PIO[11] C6 VSS C7 UART_TX C8 UART_RX C9 CSB C10 VSS_MEM C11 VDD_RADIO D1 AUX_DAC D2 PIO[8] D3 A[0] D9 REB D10 VDD_MEM D11 RF_IN E1 VSS_RADIO E2 PIO[7] E3 A[1] E9 WEB E10 A[2] E11 TX_B F1 VSS_RADIO F2 RST F3 A[3] F9 A[4] F10 A[5] F11 TX_A G1 VSS_RADIO G2 TEST_EN G3 A[6] G9 A[7] G10 A[8] G11 VDD_VCO H1 VSS_VCO H2 VDD_RADIO H3 A[9] H9 A[10] H10 A[11] H11 LOOP_FILTER J1 VSS_VCO J2 AIO[2] J3 D[14] J4 D[11] J5 D[8] J6 D[5] J7 A[12] J8 A[13] J9 A[14] J10 A[15] J11 VDD_ANA K1 VSS_ANA K2 AIO[0] K3 D[15] K4 D[12] K5 D[9] K6 D[6] K7 D[0] K8 A[16] K9 A[17] K10 A[18] K11 XTAL_IN L1 XTAL_OUT L2 VSS_ANA L3 AIO[1] L4 D[13] L5 D[10] L6 D[7] L7 D[4] L8 D[1] L9 D[2] L10 D[3] L11 U1 BlueCore2 External A3 A1 A7 A2 RY/BY B A3 WEB A4 A9 A5 A13 A6 A4 B1 A17 B2 NC B3 RESETB B4 A8 B5 A12 B6 A2 C1 A6 C2 A10 C5 A14 C6 NC C4 A1 D1 A5 D2 NC D3 NC D4 A11 D5 A15 D6 A0 E1 DQ0 E2 DQ2 E3 DQ5 E4 DQ7 E5 A16 E6 CEB F1 DQ8 F2 DQ10 F3 DQ12 F4 DQ14 F5 BYTEB F6 OEB G1 DQ9 G2 DQ11 G3 VCC G4 DQ13 G5 DQ15/A-1 G6 VSS H1 DQ1 H2 DQ3 H3 DQ4 H4 DQ6 H5 VSS H6 A18 C3 U2 MBM29LV800BA-90PBT C171u R5470k 3V3 R422k RF IN/OUT R10R C610n C810n C132u2 3V3 USER ASSIGNABLEUART CONNECTION(BCSP, H4 or USER DATA)BRING OUT TO TEST PADSFOR PROGRAMMINGTO EXTERNAL CODEC12 MBIT/S USB TO PCGENERAL PURPOSE I/O FLASH MEMORY NOTE: R1 MAY BE A SMALL INDUCTOR (e.g. 3.9nH, 6.8nH)NOTESGROUND USB_D+, USB_D- IF UNUSED Z=50 Figure 9.1: Example Application Circuit Note: For a full BlueCore2-External reference design contact your local CSR representative. Functional Blocks BC212015-ds-001e Production Information Page 2 of 4 _äìÉ`çêÉ ä OJbñíÉêå~ä Product Data Sheet 2 Description of Functional Blocks 2.1 RF Receiver The receiver features a near-zero Intermediate Frequency (IF) architecture that allows the channel filters to be integrated on to the die. Sufficient out-of-band blocking specification at the Low Noise Amplifier (LNA) input allows the radio to be used in close proximity to Global System for Mobile Communications (GSM) and Wideband Code Division Multiple Access (W-CDMA) cellular phone transmitters without being desensitised. The use of a digital Frequency Shift Keying (FSK) discriminator means that no discriminator tank is needed and its excellent performance in the presence of noise allows BlueCore2-External to exceed the Bluetooth requirements for co-channel and adjacent channel rejection. 2.1.1 Low Noise Amplifier The LNA can be configured to operate in single-ended or differential mode. Single-ended mode is used for Class 1 Bluetooth operation; differential mode is used for Class 2 operation. 2.1.2 Analogue to Digital Converter The Analogue to Digital Converter (ADC) is used to implement fast Automatic Gain Control (AGC). The ADC samples the Received Signal Strength Indicator (RSSI) voltage on a slot-by-slot basis. The front-end LNA gain is changed according to the measured RSSI value, keeping the first mixer input signal within a limited range. This improves the dynamic range of the receiver, improving performance in interference limited environments. 2.2 RF Transmitter 2.2.1 IQ Modulator The transmitter features a direct IQ modulator to minimise the frequency drift during a transmit timeslot which results in a controlled modulation index. A digital baseband transmit filter provides the required spectral shaping. 2.2.2 Power Amplifier The internal Power Amplifier (PA) has a maximum output power of +6dBm allowing BlueCore2-External to be used in Class 2 and Class 3 radios without an external RF PA. Support for transmit power control allows a simple implementation for Class 1 with an external RF PA. 2.3 RF Synthesiser The radio synthesiser is fully integrated onto the die with no requirement for an external Voltage Controlled Oscillator (VCO) screening can, varactor tuning diodes or LC resonators. 2.4 Baseband and Logic 2.4.1 Memory Management Unit The Memory Management Unit (MMU) provides a number of dynamically allocated ring buffers that hold the data which is in transit between the host and the air or vice versa. The dynamic allocation of memory ensures efficient use of the available Random Access Memory (RAM) and is performed by a hardware MMU to minimise the overheads on the processor during data/voice transfers. 2.4.2 Burst Mode Controller During radio transmission the Burst Mode Controller (BMC) constructs a packet from header information previously loaded into memory-mapped registers by the software and payload data/voice taken from the appropriate ring buffer in the RAM. During radio reception, the BMC stores the packet header in memory-mapped registers and the payload data in the appropriate ring buffer in RAM. This architecture minimises the intervention required by the processor during transmission and reception. Functional Blocks BC212015-ds-001e Production Information Page 3 of 4 _äìÉ`çêÉ ä OJbñíÉêå~ä Product Data Sheet 2.4.3 Physical Layer Hardware Engine DSP Dedicated logic is used to perform the following: § Forward error correction § Header error control § Cyclic redundancy check § Encryption § Data whitening § Access code correlation § Audio transcoding The following voice data translations and operations are performed by firmware: § A-law/μ-law/linear voice data (from host) § A-law/μ-law/Continuously Variable Slope Delta (CVSD) (over the air) § Voice interpolati…

Text truncated - open the document above for the full version.

Schematics

5 5 4 4 3 3 2 2 1 1 DD CC BB AA 00 BUB-104 B 11Wednesday, May 21, 2003 D:\PROJECT\BUB-10~2\SCHEMA~1\BC02.DSN ARCHTEK Title SizeDocument NumberRev Date:Sheet of A2 D5 A4 A8 A5 D2 A16 A11 A15 D8 A10 D1 D13 D6 D3 D7 A3 A6 D10 D4 A13 WEB A7A19 A14 A1 D12 D14 D0D9 REB A9 D15 CSB A17 A18 A12 A0 D11 BYTE D7 D13 D5 A10 A14 A13 A17 A3 A5 A0 RESET D3D9 A6 REB D10D12 USB_D- D8 A11 A15 USB_D+ A18 D0 CSB D11 A1 D4 A8 A7 D15 A9 A12 D14 A2 A16 D1 A4 WEB SPI_CSB D2D6 USB_D+ USB_D- SPI_CLK SPI_MISO SPI_MOSI +1.8V +1.8V VMEN VMEN VMEN +1.8V +3.3V +3.3V+1.8V +1.8V VMEN +1.8V +1.8V +3.3V +1.8V +3.3V +1.8V VBUS VBUS +3.3V C22 2.2UF\0805 R422C15100nF R522 L5 BEAD/0603/60 ohm C10 10nF U3 MDR741F 1 34 2 IN GNDGND OUT L6 hf indouctor 3.9 nh C17 1pf C8 2.2UF\0805 ICT51 ICT11 ICT21 ICT71 ICT31 ICT41 ICT81 ICT9 1 C16 100nF ICT10 1 C4 10nF C5 10nF C9 47PF \A1 \A2 \A3 \A4 \A5 \A6 \A7 \A8 \A9 \A10 \A11 \B1 \B2 \B3 \B4 \B5 \B6 \B7 \B8 \B9 \B10 \C2 \C3 \C4 \C5 \C6 \C7 \C8 \C9 \C10 \C11 \D1 \D2 \D3 \D9 \D10 \D11 \E1 \E2 \E3 \E9 \E10 \E11 \F1 \F2 \F3 F9\ F10\ F11\ G1\ G2\ G3\ G10\ G11\ G9\ H1\ H2\ H3\ H9\ H10\ H11\ J1\ J2\ J3\ J4\ J5\ J6\ J7\ J8\ J9\ J10\ J11\ K10\ K11\ K1\K2\ K3\K4\K5\K6\K7\K8\ K9\ L1\ L2\L3\ L4\L5\L6\L7\L8\L9\ L10\L11\ U1 BC02 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 252627282930313233343536373839404142434445464748 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 737475767778798081828384858687888990919293949596 VDD_PIO VSS_PIO PIO5/USB DETACH SPI_CSB SPI_MOSI USB_D- USB_D+ VDD_CORE VSS_CORE VDD_PADS VSS_PADS PIO4/USB_ON PIO3/USB_WAKE_UP PIO2/USB_PULL_UP SPI_MISO SPI_CLK UART_CTS UART_RTS PCM_CLK PCM_OUT PCM_IN PCM_SYNC PIO0/RXEN PIO1/TXEN PIO6/CLK_REQPIO9PIO10PIO11VSSUART_TXUART_RXCSBVSS_MEMVDD_RADIOAUX_DACPIO8A0REBVDD_MEMRF_INVSS_RADIOPIO7/RAM_CSBA1WEBA2TX_BVSS_RADIORESET A3 A4 A5 TX_A VSS_RADIO TEST_EN A6 A7 A8 VDD_VCO VSS_VCO VDD_RADIO A9 A10 A11 LOOP_FILTER VSS_VCO AIO2 D14 D11 D8 D5 A12 A13 A14A15 VDD_ANAVSS_ANA AIO0 D15D12 D9D6D0 A16A17A18 XTAL_IN XTAL_OUT VSS_ANA AIO1 D13D10 D7D4D1D2D3 L1 3.9nH C14 2.2UF\0805 R6 NF C13 10nF T1 HHM-1517 123 456 Unbalanced GND Balanced BalancedGNDNC R1 NF R30 A1 subs thin = 0.8mm , copper thin = 0.5oz 1 JP1 1 2 3 4 VCC D- D+ GND C21 2.2UF\0805 U9 CM2831SIM25 3 1 4 2 5 CE IN NC GND OUT L2 3.9nH U4 CM2831DIM25 3 1 4 2 5 CE IN NC GND OUT C2 1.8pf C3 1.8pf L4 BEAD/0603/60 ohm L3 3.9nH C147PF R7 1K X1 16MHz 5*3.2 12 34 TP2 1 \A1 \A2 \A3 A4\ A5\ A6\ \B1 \C1 \D1 \E1 \F1 \G1 \H1 \B2 \C2 \D2 \E2\F2\G2\H2\B3 \C3\D3 \E3 \F3 \G3 \H3 B4\ C4\ D4\ E4\ F4\ G4\ H4\ B5\ C5\ D5\ E5\ F5\ G5\ H5\ B6\ C6\ D6\E6\ F6\ G6\ H6\ U2 SST39LF/VF800 1 2 3 4 5 6 7 8 9 10 11 12 131415161718192021222324 25 26 27 28 29 30 31 32 33 34 35 36 373839404142434445464748 A3 A4 A2 A1 A0 CE# OE# VSS A7 A17 A6 A5 DQ0DQ8DQ9DQ1NCNCA18NCDQ2DQ10DQ11DQ3 WE# NC NC NC DQ5 DQ12 VDD DQ4 A9 A8 A10 A11 DQ7 DQ14DQ13 DQ6 A13A12A14A15A16 NC DQ15 VSS R8 0 C6NF C7 220PF\0603 R2180K C11 3.3PF C12 12PF

Test Report

FCC TEST REPORT Report No. : F351606 SPORTON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT for 47 CFR, Part 15, Subpart C Equipment : Bluetooth USB Dongle Model No. : BUB-103 FCC ID. : FI7BUB-103 Filing Type : Certification Applicant : Archtek Telecom Corp. 4/FL, No. 9, Lane 130 Min Chyuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. ‚ The test result refers exclusively to the test presented test model / sample. ‚ Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. ‚ Certificate or Test Report must not be used by the applicant to claim the product in this test report endorsement by NVLAP or any agency of U.S. government. SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. FCC TEST REPORT Report No. : F351606 SPORTON International Inc. FCC ID. : FI7BUB-103 TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : May 31, 2003 Table of Contents History of this test report..................................................................................................................ii CERTIFICATE OF COMPLIANCE........................................................................................................................1 1. General Description of Equipment under Test.............................................................................................2 1.1. Applicant..........................................................................................................................................................................................2 1.2. Manufacturer ...................................................................................................................................................................................2 1.3. Basic Description of Equipment under Test ....................................................................................................................................2 1.4. Feature of Equipment under Test ...................................................................................................................................................2 2. Test Configuration of Equipment under Test ...............................................................................................4 2.1. Test Manner ....................................................................................................................................................................................4 2.2. Description of Test System .............................................................................................................................................................4 2.3. Connection Diagram of Test System ..............................................................................................................................................6 3. Test Software ...................................................................................................................................................7 4. General Information of Test............................................................................................................................8 4.1. Test Voltage ....................................................................................................................................................................................8 4.2. Standard for Methods of Measurement...........................................................................................................................................8 4.3. Test in Compliance with ..................................................................................................................................................................8 4.4. Frequency Range Investigated .......................................................................................................................................................8 4.5. Test Distance ..................................................................................................................................................................................8 5. Report of Measurements and Examinations ................................................................................................9 5.1. List of Measurements and Examinations ........................................................................................................................................9 5.2. Hopping Channel Separation ........................................................................................................................................................10 5.3. Number of Hopping Frequency .....................................................................................................................................................14 5.4. Hopping Channel Bandwidth.........................................................................................................................................................16 5.5. Dwell Time of Each Frequency within a 30 Seconds Period.........................................................................................................20 5.6. Output Power ................................................................................................................................................................................24 5.7. 100KHz Bandwidth of Frequency Band Edges .............................................................................................................................28 5.8. Test of Conducted Emission .........................................................................................................................................................31 5.9. Test of Radiated Emission ............................................................................................................................................................3…

Text truncated - open the document above for the full version.

Test Setup Photos

FCC TEST REPORT Report No. : F351606 SPORTON International Inc. FCC ID : FI7BUB-103 TEL : 886-2-2696-2468 Page No. : 1 of 3 FAX : 886-2-2696-2255 Issued Date : May 31, 2003 1.1. Photographs of Conducted Emission Test Configuration „ The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW FCC TEST REPORT Report No. : F351606 SPORTON International Inc. FCC ID : FI7BUB-103 TEL : 886-2-2696-2468 Page No. : 2 of 3 FAX : 886-2-2696-2255 Issued Date : May 31, 2003 SIDE VIEW FCC TEST REPORT Report No. : F351606 SPORTON International Inc. FCC ID : FI7BUB-103 TEL : 886-2-2696-2468 Page No. : 3 of 3 FAX : 886-2-2696-2255 Issued Date : May 31, 2003 1.2. Photographs of Radiated Emission Test Configuration „ The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW

Contact Information

Applicant

Mahan Chu(Vice President)
-886-2-22188730Fax: 886-2-22189283

Test Firm

Sporton International Inc.Kathy Lin
[email protected]886-2-2696-2468Fax: 886-2-2696-2255

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.40 GHz - 2.48 GHz2.00 mW
Grant Notes
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.End-users must be provided with specific operating instructions for satisfying RF exposure compliance.

Other Applications from Archtek Telecom Corporation

External 56K Data/Fax Modem - FCC ID FI7MIEV56 - Archtek Telecom Corporation
FI7MIEV56

External 56K Data/Fax Modem

Nov 28, 2001

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
1Mbps HomePNA & 10/100Mbpx Ethernet PCI Card - FCC ID FI7PDIH00 - Archtek Telecom Corporation
FI7PDIH00

1Mbps HomePNA & 10/100Mbpx Ethernet PCI Card

Aug 09, 2000

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
HomePNA 10Mbps PCI Card - FCC ID FI7PEIH00 - Archtek Telecom Corporation
FI7PEIH00

HomePNA 10Mbps PCI Card

Apr 25, 2000

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
IC CARD READER - FCC ID FI7R8ER00 - Archtek Telecom Corporation
FI7R8ER00

IC CARD READER

Feb 07, 2000

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
56K Data/FAX Internal Modem - FCC ID FI7MCIV56 - Archtek Telecom Corporation
FI7MCIV56

56K Data/FAX Internal Modem

Jan 13, 2000

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral