GKR402550Tablet

1 ICON Tablet Model: MP21-ARGON-C 2 Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the tablet. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. 3 Contents Directions ........................................................................... 2 Safety Precautions .............................................................. 5 1 Know Your Tablet ............................................................. 7 2 Get to Know Your System ................................................. 7 2-1 Add screen shortcuts ................................................... 8 2-2 Delete screen shortcuts/widgets .................................. 9 2-3 On-screen Keyboard .................................................. 10 3 System Settings .............................................................. 11 3-1 Wireless & networks .................................................. 11 3-2 Device ....................................................................... 15 3-3 Personal .................................................................... 16 3-4 System ....................................................................... 17 4 Browser ......................................................................... 18 4 5 Camera .......................................................................... 18 6 Specifications ................................................................. 20 7 Statement ...................................................................... 19 5 Safety Precautions 1. DO NOT expose the tablet to dirty or dusty environment. Keep the environment clean and dry. 2. DO NOT place or drop objects on the top of the tablet. DO NOT shove any foreign objects into the tablet. DO NOT cover the LCD Screen strongly. 3. DO NOT expose the tablet to strong magnetic or electrical fields; DO NOT place the floppy disk near or on the tablet, which may loss the data of the floppy disk. 4. DO NOT leave the tablet facing the sun as it can damage the LCD Screen, especially in the car. 5. DO NOT expose the tablet to or use near liquids, rain, or moisture. 6. DO NOT throw the tablet in municipal waste. Check local regulations for disposal of electronic products. 8. DO NOT insert anything into the tablet that may result in short circuit or damage the circuit. 9. Power off the tablet, if you want to install or remove some external devices which are not support hot-plug. 10. DO NOT disassemble the tablet, only a certified service technician should perform repairs on your computer. Otherwise, problems may result and the manufacturer should not hold responsibility for the damage. 11. 6 12. RECYCLING this product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment. 13. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. 14. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 7 1 Know Your Tablet Picture1-1 KEYS: connect to the console host through a cable, so that the host can control the volume or reset. AUDIO JACK: connect to the console host through a cable to provide audio signal output. 2 Get to Know Your System 8 Connect to the power supply and then it will display the home screen Click on the screen for ten times, pause for 5 seconds and then do it again for ten times’ clicks to enter the Setting privileged . : tap to return to the previo us page. : tap to enter Home screen. : tap to open recent APPs list menu. : tap to enter APPs Menu. If it’s your first time to use the tablet, the system will enter the guide menu. Please finish the initial setting following the instructions. 2-1 Add screen shortcuts On the home page, touch and hold the blank area to popup menu to change wallpaper; Touch to access APPS menu; touch and hold an APPS icon to add it to the home screen. 2-2 Delete screen shortcuts/widgets 9 On the home screen, touch and hold the shortcut or widget to be deleted until the icon “×” appears at the top middle of the home screen. Drag the shortcuts to the remove icon to delete. 10 2-3 On-screen Keyboard Just touch a text field to open the on-screen keyboard; Touch on the tool bar to close it. 3 System Settings 3-1 Wireless & networks 3-1-1 Wi-Fi Touch the Wi-Fi switch behind of the Wi-Fi item to turn on the 11 Wi-Fi function and then the system will auto-scan the available networks to display . Select one network and input its password if necessary to connect. Touch to perform advanced Wi-Fi settings. 3-1-2 Bluetooth The Bluetooth function enables you to exchange files between the tablet and other Bluetooth devices. Before this step, please activate the Bluetooth function of other device (mobile phone, Bluetooth earphone etc.) and make sure the device is in range. Touch the Bluetooth switch behind of the Bluetooth item to turn on the Bluetooth function and then the system will auto-scan the visible Bluetooth device nearby and display after finding . Touch the desired Bluetooth device to start pairing. Then according to the indications on both sides, users can complete the connection successfully in seconds. After pairing…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Compal Electronics Inc Address No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city,, 11492 Taiwan Grantee Code GKR FCC ID GKR402550 Authorized Contact Name Joyce Ting Contact Email [email protected] Contact Phone +886-2-87978588 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: July 4, 2020 Print Name: Joyce Ting Title: RF Regulatory Design Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

DTS‐UNII Device Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization, Device FCC ID: GKR402550 IC: 2533B-402550 (1) DFS Device -- Master, Client with Radar detection capability, Client without radar detection capability, N/A (2) Active / Passive Scanning , Ad hoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 2412-2462 Yes, No Yes, No Yes, No Yes, No 5180-5240 Yes, No Yes, No Yes, No Yes, No 5260-5320 Yes, No Yes, No Yes, No Yes, No 5500-5700 Yes, No Yes, No Yes, No Yes, No 5745-5825 Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes, No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection) Support nvram Configuration, also is according to the signal received by the modem. (4) Meet 15.202 requirement - Yes, No , Pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply, No Apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) (6) Please help to provide justification how device was restricted to operate in 5600-5650MHz in below. Engineering mode or meta tool setting ________________________ (Signature) Compal Electronics Inc Joyce Ting / RF Regulatory Design Manager Phone: +886-2-87978588 E-Mail: [email protected]

Date: July 4, 2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: GKR402550 To whom it may concern: We, the undersigned, hereby authorize Kevin Tsai / Deputy Manager of SGS Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Compal Electronics Inc. This authorization is valid until further written notice from the applicant. Name (Printed): Joyce Ting Title: RF Regulatory Design Manager Signature: On behalf of Company: Compal Electronics Inc Telephone: +886-2-87978588

Date: July 4, 2020 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city,, 11492 Taiwan Regarding: Confidentiality Request regarding application for FCC ID: GKR402550 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Joyce Ting / RF Regulatory Design Manager Compal Electronics Inc Phone: +886-2-87978588 E-Mail: [email protected]

Page: 1 / 12 Report No.: T200521W01 Rev.: 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Page: 2 / 12 Report No.: T200521W01 Rev.: 00 Page: 3 / 12 Report No.: T200521W01 Rev.: 00 Page: 4 / 12 Report No.: T200521W01 Rev.: 00 Page: 5 / 12 Report No.: T200521W01 Rev.: 00

Page: 6 / 12 Report No.: T200521W01 Rev.: 00 INTERNAL PHOTOGRAPHS OF EUT Page: 7 / 12 Report No.: T200521W01 Rev.: 00 Page: 8 / 12 Report No.: T200521W01 Rev.: 00 Page: 9 / 12 Report No.: T200521W01 Rev.: 00 Page: 10 / 12 Report No.: T200521W01 Rev.: 00 Page: 11 / 12 Report No.: T200521W01 Rev.: 00 RF IC Crystal Page: 12 / 12 Report No.: T200521W01 Rev.: 00 Antenna

FCC ID: GKR402550 Page 1 / 9 Report No.: T200521W01-MF Rev.: 01 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw www.ccsrf.com Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For Tablet Model: MP21-ARGON-C Trade Name: ICON/iFit Issued to Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city, 11492 Taiwan Issued by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. (R.O.C.) Issue Date: July 13, 2020 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. Page 2 / 9 Report No.: T200521W01-MF Rev.: 01 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 10, 2020 Initial Issue ALL Allison Chen 01 July 13, 2020 See the following note Rev.(01) P.7, P.9 Allison Chen Rev.(01) 1. Revised max. measurement average power. Page 3 / 9 Report No.: T200521W01-MF Rev.: 01 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ......................................................................... 4 2. LIMIT ..................................................................................................................... 5 3. EUT SPECIFICATION .......................................................................................... 6 4. TEST RESULTS ................................................................................................... 8 5. MAXIMUM PERMISSIBLE EXPOSURE............................................................... 9 Page 4 / 9 Report No.: T200521W01-MF Rev.: 01 1. TEST RESULT CERTIFICATION We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. APPLICABLE STANDARDS STANDARD TEST RESULT KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 No non-compliance noted Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Approved by: Kevin Tsai Deputy Manager Compliance Certification Services Inc. Page 5 / 9 Report No.: T200521W01-MF Rev.: 01 2. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. Page 6 / 9 Report No.: T200521W01-MF Rev.: 01 3. EUT SPECIFICATION EUT Tablet Model MP21-ARGON-C Model Discrepancy N/A Frequency band (Operating) Bluetooth: 2402MHz-2480MHz 802.11b/g/n HT20: 2412MHz ~ 2462 MHz 802.11n HT40: 2422MHz ~ 2452MHz 802.11a/n HT20: 5180MHz ~ 5240MHz / 5260 ~ 5320MHz 5500 ~ 5700MHz / 5745MHz ~ 5825MHz 802.11n HT40: 5190MHz ~ 5230MHz / 5270 ~ 5310MHZ 5510 ~ 5670MHz / 5755MHz ~ 5795MHz 802.11ac VHT80: 5210MHz / 5290MHz / 5530 MHz~5610MHz / 5775MHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Specification PIFA Antenna BT & WIFI 2.4GHz: 1.37 dBi WIFI 5GHz: 0.19 dBi BT: Directional Gain :1.37 dBi (Numeric gain:1.37) Worst 2.4GHz: Directional Gain :1.37 dBi (Numeric gain:1.37) Worst 5GHz: Directional Gain :0.19 dBi (Numeric gain:1.04)Worst Page 7 / 9 Report No.: T200521W01-MF Rev.: 01 Maximum Measurement Average Power BT3.48 dBm(2.228 mW) 2.4GHz IEEE 802.11b Mode: 18.22 dBm(66.374 mW) IEEE 802.11g Mode: 16.05 dBm(40.272 mW) IEEE 802.11n HT 20 Mode: 17.87 dBm(61.235 mW) IEEE 802.11n HT 40 Mode: 18.54 dBm(71.450 mW) 5GHz IEEE 802.11a Mode: 16.43 dBm(43.954 mW) IEEE 802.11n HT 20 Mode: 16.34 dBm(43.053 mW) IEEE 802.11n HT 40 Mode: 16.46 dBm(44.259 mW) Maximum tune up power BT4.50 dBm(2…

Text truncated - open the document above for the full version.

FCC ID: GKR402550 IC: 2533B-402550 Page: 1 / 55 Report No.: T200521W01-RP1 Rev.: 02 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw www.ccsrf.com Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-247 Test Standard FCC Part 15.247 IC RSS-247 issue 2 and IC RSS-GEN issue 5 Product name Tablet Brand Name ICON/iFit Model No. MP21-ARGON-C Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc.( Wugu Laboratory) Approved by: Tested by: Kevin Tsai Dally Hong Deputy Manager Engineer Page: 2 / 55 Report No.: T200521W01-RP1 Rev.: 02 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 8, 2020 Initial Issue ALL Allison Chen 01 July 10, 2020 See the following note Rev.(01) P.55 Allison Chen 02 July 13, 2020 See the following note Rev.(02) P.10 Allison Chen Rev.(01) 1. Revised description for summary of spot check. Rev.(02) 1. Revised test summary for Antenna Requirement section. Page: 3 / 55 Report No.: T200521W01-RP1 Rev.: 02 Table of contents 1. GENERAL INFORMATION .................................................................................................. 4 1.1 EUT INFORMATION ............................................................................................................ 4 1.2 INFORMATION ABOUT THE FHSS CHARACTERISTICS.................................................. 5 1.3 EUT CHANNEL INFORMATION .......................................................................................... 6 1.4 ANTENNA INFORMATION .................................................................................................. 6 1.5 MEASUREMENT UNCERTAINTY ....................................................................................... 7 1.6 FACILITIES AND TEST LOCATION .................................................................................... 8 1.7 INSTRUMENT CALIBRATION ............................................................................................. 8 1.8 SUPPORT AND EUT ACCESSORIES EQUIPMENT ........................................................... 9 1.9 TEST METHODOLOGY AND APPLIED STANDARDS ....................................................... 9 2. TEST SUMMARY ............................................................................................................... 10 3. DESCRIPTION OF TEST MODES ..................................................................................... 11 3.1 THE WORST MODE OF OPERATING CONDITION .......................................................... 11 3.2 THE WORST MODE OF MEASUREMENT ........................................................................ 12 3.3 EUT DUTY CYCLE ............................................................................................................ 13 4. TEST RESULT ................................................................................................................... 14 4.1 AC POWER LINE CONDUCTED EMISSION ..................................................................... 14 4.2 OUTPUT POWER MEASUREMENT .................................................................................. 17 4.3 RADIATION BANDEDGE AND SPURIOUS EMISSION .................................................... 19 4.4 TEST DATA RE-USE SUMMARY ...................................................................................... 54 APPENDIX 1 - PHOTOGRAPHS OF EUT Page: 4 / 55 Report No.: T200521W01-RP1 Rev.: 02 1. GENERAL INFORMATION 1.1 EUT INFORMATION FCC Applicant Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city, 11492 Taiwan IC Applicant COMPAL ELECTRONICS INC. No. 581 & 581-1, Ruiguang Rd,, Neihu District Taipei R.O.C. 114 Taiwan Manufacturer Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city, 11492 Taiwan Equipment Tablet Model No. MP21-ARGON-C Model Discrepancy N/A Trade Name ICON/iFit Received Date May 21, 2020 Date of Test June 2 ~ July 7, 2020 Power Operation EUT Power from Host device (DC…

Text truncated - open the document above for the full version.

Page: A-1 / A-4 Report No.: T200521W01-RP1 Rev.: 02 APPENDIX-A Test Photo Radiation (Below 1GHz) Radiation (Above 1GHz) Page: A-2 / A-4 Report No.: T200521W01-RP1 Rev.: 02 Conducted Emission Set Up Photo Page: A-3 / A-4 Report No.: T200521W01-RP1 Rev.: 02 Conduction Page: A-4 / A-4 Report No.: T200521W01-RP1 Rev.: 02