Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 69 | 27 | 3.71 GHz - 3.98 GHz | 420.70 mW | 9M31W7D | 2.5
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. The device LTE supports 1.4/3/5/10/15/20 MHz bandwidths in Band 2, Band 4, Band 25, and Band 66; 1.4/3/5/10 MHz bandwidths in Band 5 and Band 12; 1.4/3/5/10/15 MHz bandwidths in Band 26; 5/10/15/20 MHz bandwidths in Band 41, and Band 71; 5/10 MHz bandwidths in Band 30; 5GNR Sub 6GHz supports 5/10/15/20 MHz bandwidths in n2, n5, n25, and n71 bands; 5/10/15 MHz bandwidths in n12 band; 5/10 MHz bandwidths in n30 band; 10/15/20/40/50/60/80/90/100 MHz bandwidths in n41, n41 MIMO and n77 bands; 5/10/15/20/40 MHz bandwidths in n66 band. The device supports downlink carrier aggregation for uplink and downlink. Uplink carrier aggregation for intra-band is supported for the following channel bandwidth combinations: LTE Band 5, LTE Band 41, LTE Band 66B, and LTE Band 66C. Values listed are for highest power and widest bandwidth for each emission designator (QPSK and QAM) for single carrier and for intra-band uplink Carrier Aggregation. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.