Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 52 | 27 | 673 MHz - 688 MHz | 227.50 mW | 19M0W7D | 2.5
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular Approval. Output power listed is conducted. LTE supports 5/10/15/20 MHz bandwidths in Band 71, and Band 41; 1.4/3/5/10 MHz bandwidths in Band 5, and Band 12; 1.4/3/5/10/15/20 MHz bandwidths in Band 2, Band 4, Band 25, and Band 66. 5GNR Sub 6GHz supports 5/10/15/20 MHz bandwidths in n71; 5/10/15/20/25/30/40 MHz bandwidths in n25/n66; 10/15/20/30/40/50/60/70/80/90/100 MHz bandwidths in n41; 10/15/20/30/40/50/60/70/80/90/100 MHz bandwidths in n77. This device supports downlink carrier aggregation for inter-band and intra-band, uplink carrier aggregation for intra-band in LTE Band 2/66/41. Powers listed are for the highest power and widest bandwidth within each band for QPSK and QAM modulations for single carrier operations and, where applicable, widest bandwidth and highest power for intra-band uplink carrier aggregation.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is limited to OEM installation only. OEM must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with the host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.