GKRWM3BAB51Notebook PC with built in 802.11a/b WLAN

Compal Electronics Inc

Click to zoom

Application Details

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Date of Grant: Oct 16, 2003
Application Purpose: Original Equipment
Date of Application: Oct 16, 2003
Equipment Note: Notebook PC with built in 802.11a/b WLAN
Frequency Range: 5180.00000000 - 5320.00000000
Company: Compal Electronics Inc
Country: Taiwan

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

CL51 User Manual Safety Instructions Use the following safety guidelines to help protect yourself and your computer. When Using Your Computer CAUTION: Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base. Allowing sustained contact with the skin could cause discomfort or, eventually, a burn. l Do not attempt to service the computer yourself. Always follow installation instructions closely. l Do not carry a battery in your pocket, purse, or other container where metal objects (such as car keys) could short-circuit the battery terminals. The resulting excessive current flow can cause extremely high temperatures and may result in damage from burns. l Be sure that nothing rests on your AC adapter’s power cable and that the cable is not located where it can be tripped over or stepped on. l Place the AC adapter in a ventilated area, such as a desktop or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. l Do not push objects into air vents or openings of your computer. Doing so can cause fire or electric shock by shorting out interior components. l Use only the AC adapter and batteries that are approved for use with this computer. Use of another type of battery or AC adapter may risk fire or explosion. l Danger of explosion if battery is incorrectly replaced. l Replace only with the same or equivalent type battery recommended by the manufacturer. l Dispose of used batteries according to the manufacturer’s instructions. l Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. - 115 V/60 Hz in most of North and South America and some Far Eastern countries such as South Korea and Taiwan. - 100 V/50 Hz in eastern Japan and 100 V/60Hz in western Japan. - 230 V/50 Hz in most of Europe, the Middle East, and the Far East. l If you use an extension cable with your AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable. l To remove power from the computer, turn it off, remove the battery, and disconnect the AC adapter from the electrical outlet. l To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. l Do not dispose of batteries in a fire. They may explode. Check with local authorities for disposal instructions. l When setting up the computer for work, place it on a level surface. l When traveling, do not check the computer as baggage. You can put your computer through an X-ray security machine, but never put your computer through a metal detector. If you have the computer checked by hand, be sure to have a charged battery available in case you are asked to turn on the computer. l When traveling with the hard drive removed from the computer, wrap the drive in a non-conducting material, such as cloth or paper. If you have the drive checked by hand, be ready to install the drive in the computer. Your can put the hard drive through an X-ray security machine, but never put the drive through a metal detector. l When traveling, do not place the computer in overhead storage compartments where it could slide around. Do not drop your computer or subject it to other mechanical shocks. l Protect your computer, battery, and hard drive from environmental hazards such as dirt, dust, food, liquids, temperature extremes, and overexposure to sunlight. l When you move your computer between environments with very different temperature and/or humidity ranges, condensation may form on or within the computer. To avoid damaging the computer, allow sufficient time for the moisture to evaporate before using the computer. Ë NOTICE: When taking the computer from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the computer to acclimate to room temperature before turning on power. l When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. l Before you clean your computer, turn it off, unplug it from its power source, and remove the battery. l Handle components with care. Hold a component such as a memory module by its edges, not its pins. CAUTION: When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: l Do not use this product near water, for example, near a bathtub, washing bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. l Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. l Do not use the telephone to report a gas leak in the vicinity of the leak. l Use only the power cord indicated in this manual. Regulatory Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i…

Text truncated - open the document above for the full version.

Cover Letter(s)

OEM Name or other identification Document Number: XXXX Rev: 00 CL51 Antenna Information (English Required) Wistron NeWeb Corporation Intel Regulatory Antenna Information Example Rev. 4 1/21 OEM Name or other identification Document Number: XXXX Rev: 00 Antenna Information I. Antenna Assembly Specifications Antenna assembly overview: Peak Gain including cable loss. Designator Manufacture Antenna type Cable Assembly Info. Peak Gain W/ Cable loss (dBi) 2400-2500MHz 0.66 dBi (peak) 5150-5350MHz 2.51 dBi (peak) 5470-5725MHz _.__ dBi (peak) (P/N: DC330011800.EBJ.001) Main antenna Wistron NeWeb Corporation PIFA (P/N: 50.EBJ02.001 or 50.EBJ04.001) 50 ohm Coaxial. Length: 493 mm diameter: 1.13mm Connector: IPEX 20278-101R-13 or WNC connector 5725-5850MHz _.__ dBi (peak) 2400-2500MHz 5.00 dBi (peak) 5150-5350MHz 2.48 dBi (peak) 5470-5725MHz _.__ dBi (peak) (P/N: DC330011810.EBJ.002) Auxiliary antenna Wistron NeWeb Corporation PIFA (P/N: 50.EBJ01.001 or 50.EBJ03.001) 50 ohm Coaxial. Length: 628 mm diameter: 1.13mm Connector: IPEX 20278-101R-13 or WNC connector 5725-5850MHz _.__ dBi (peak) Antenna overview: Peak Gain not including cable loss. Antenna Designator Manufacture Antenna type Peak Gain w/o Cable Loss (dBi) 2400-2500MHz 2.90 dBi (peak) 5150-5350MHz 5.87 dBi (peak) 5470-5725MHz _.__ dBi (peak) Main antenna Wistron NeWeb Corporation PIFA 5725-5850MHz _.__ dBi (peak) 2400-2500MHz 6.81 dBi (peak) 5150-5350MHz 5.20 dBi (peak) 5470-5725MHz _.__ dBi (peak) Auxiliary antenna Wistron NeWeb Corporation PIFA 5725-5850MHz _.__ dBi (peak) Intel Regulatory Antenna Information Example Rev. 4 2/21 (P/N: DC330011800.EBJ.001) (P/N: DC330011810.EBJ.002) OEM Name or other identification Document Number: XXXX Rev: 00 Cable assembly overview: Cable loss (including connector). Designator Manufacture Cable type and length VSWR Cable Loss (dBi) 2400-2500MHz 1.3 max 2400-2500MHz 2.24 dBi (peak) (P/N: 50.EBJ02.001) For use with the Main antenna Well Shine Enterprises Co., Ltd P/N: C.A WN-S-1.13W -628mm-(2-2-1) 50 ohm Coaxial. Length: 628 mm diameter: 1.13mm Connector: IPEX 20278-101R-13 5150-5350MHz 1.4 max 5150-5350MHz 3.36 dBi (peak) 2400-2500MHz 1.3 max 2400-2500MHz 1.81 dBi (peak) (P/N: 50.EBJ01.001) For use with the Auxiliary antenna Well Shine Enterprises Co., Ltd P/N: C.A WN-S-1.13B -493mm-(2-2-1) 50 ohm Coaxial. Length: 493 mm diameter: 1.13mm Connector: IPEX 20278-101R-13 5150-5350MHz 1.4 max 5150-5350MHz 2.72 dBi (peak) Designator Manufacture Cable type and length VSWR Cable Loss (dBi) 2400-2500MHz 1.3 max 2400-2500MHz 2.24 dBi (peak) (P/N: 50.EBJ04.001) For use with the Main antenna SPEED TECH CORP. P/N: C.A ST-1W-1.13W -N-628mm-(2-2-1) 50 ohm Coaxial. Length: 628 mm diameter: 1.13mm Connector: WNC connector 5150-5350MHz 1.4 max 5150-5350MHz 3.36 dBi (peak) 2400-2500MHz 1.3 max 2400-2500MHz 1.81 dBi (peak) (P/N: 50.EBJ03.001) For use with the Auxiliary antenna SPEED TECH CORP. P/N: C.A ST-1W-1.13B -N-493mm-(2-2-1) 50 ohm Coaxial. Length: 493 mm diameter: 1.13mm Connector: WNC connector 5150-5350MHz 1.4 max 5150-5350MHz 2.72 dBi (peak) NOTE: For Japan, Korea, and China the antenna data is the same as what this document requests: Intel Regulatory Antenna Information Example Rev. 4 3/21 OEM Name or other identification Document Number: XXXX Rev: 00 • Please insert dimensioned photo or dimensioned drawing of main antenna here. Please insert dimensioned photo or dimensioned drawing of aux antenna here. Intel Regulatory Antenna Information Example Rev. 4 4/21 OEM Name or other identification Document Number: XXXX Rev: 00 Radiation characteristic of antennaeRadiation characteristic of antennae Loaded (In Host System) 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Main Antenna @ 2.40 GHz -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 V-pole (dBi) H-pole (dBi) H+V Center Frequency 2400 MHz Horizontal (dBi) peak -2.46 Vertical (dBi) peak -3.66 Horz+Vert (dBi) peak -0.57 Intel Regulatory Antenna Information Example Rev. 4 5/21 OEM Name or other identification Document Number: XXXX Rev: 00 Main antenna: 2450 MHz Main Antenna @ 2.45 GHz -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 3.6 7.2 10.8 14.4 18.0 21.6 25.2 28.8 32.4 36.0 39.6 43.2 46.8 50.4 54.0 57.6 61.2 64.8 68.4 72.0 75.6 79.2 82.8 86.4 90.0 93.6 97.2 100.8 104.4 108.0 111.6 115.2 118.8 122.4 126.0 129.6 133.2 136.8 140.4 144.0 147.6 151.2 154.8 158.4 162.0 165.6 169.2 172.8 176.4 180.0183.6 187.2 190.8 194.4 198.0 201.6 205.2 208.8 212.4 216.0 219.6 223.2 226.8 230.4 234.0 237.6 241.2 244.8 248.4 252.0 255.6 259.2 262.8 266.4 270.0 273.6 277.2 280.8 284.4 288.0 291.6 295.2 298.8 302.4 306.0 309.6 313.2 316.8 320.4 324.0 327.6 331.2 334.8 338.4 342.0 345.6 349.2 352.8 356.4 360.0 V-pole (dBi) H-pole (dBi) H+V Center Frequency 2450 MHz Horizontal (dBi) peak -1.58 Vertical (dBi) peak -2.95 Horz+Vert (dBi) peak 0.66 Intel Regulatory Antenna Information Example Rev. 4 6/21 OEM Name or other identification Document Number: XXXX Rev: 00 Main antenna: 2500 MHz Main Antenna @ 2.50 GHz -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 1 23 45 6 7 89 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 …

Text truncated - open the document above for the full version.

Cover Letter(s)

From: [email protected] Sent: Friday, October 17, 2003 7:32 AM To: [email protected] Cc: Shirley Kang- Taiwan; [email protected]; Mike Kuo; [email protected]; [email protected]; [email protected]; Scott Wang; '[email protected]' Subject: ??: RE: ??: RE: AN03T3257-DTS-COMPAL-GKRWM3BAB51 Hi, Steve, Please find the report which is revised per your comment dealt with Miro this morning, and release the grant ASAP if no any other issue should be found. Thank you!! BR, Eric ----- 轉呈者 eric/ccsemc 於 2003/10/17 10:20 PM ----- salena 楊靜姍 2003/10/17 09:44 PM 收件人： eric/ccsemc@ccsemc 副本抄送： 主旨： 回信： RE: ??: RE: AN03T3257-DTS-COMPAL-GKRWM3BAB51 小武， 不會再改了，miro再三確&#35 469;過了。 靜姍 ----- 轉呈者 salena/ccsemc 於 2003/10/17 09:41 PM ----- miro 闕國宏 2003/10/17 10:33 AM 收件人： salena/ccsemc@ccsemc 副本抄送： 主旨： 回信： RE: ??: RE: AN03T3257-DTS-COMPAL-GKRWM3BAB51連結 Dear selena, 已搞定. Best regards, Miro Chueh salena 楊靜姍 2003/10/17 09:03 AM 收件人： eric/ccsemc@ccsemc, miro/ccsemc@ccsemc 副本抄送： 主旨： RE: ??: RE: AN03T3257-DTS-COMPAL- GKRWM3BAB51 Hi Eric & Miro, 長官說希望能夠早上十 點八補給她，她希望今 天能夠才到證書，謝謝 ！ 靜姍 ----- 轉呈者 salena/ccsemc 於 2003/10/17 09:00 AM ----- lucy_tsai 蔡文君 2003/10/17 09:00 AM 收件人： salena/ccsemc@ccsemc, eric/ccsemc@ccsemc, miro/ccsemc@ccsemc 副本抄送： jonson/ccsemc@ccsemc 主旨： RE: ??: RE: AN03T3257-DTS-COMPAL- GKRWM3BAB51 Hi Salena, Please check Eric and Miro for Steve's comment and make the correction asap. And please put this in the first priority and hope we can reply to Steve on 10:00AM around. Thank you. Best Regards, Lucy ----- 轉呈者 lucy_tsai/ccsemc 於 2003/10/17 08:55 AM --- -- Steve Cheng <[email protected]> 2003/10/17 07:19 AM 收件人： "'[email protected]'" <[email protected]> 副本抄送： Shirley Kang- Taiwan <[email protected]>, [email protected], Mike Kuo <[email protected]>, [email protected], [email protected], [email protected], Scott Wang <[email protected]> 主旨： RE: ??: RE: AN03T3257-DTS-COMPAL- GKRWM3BAB51 Hi Lucy, DTS is ready to grant. However, the peak excursion portion of UNII report is still not correct in the revised report. Please use follow method to configure the test plots. · If sweep time ≤ T in peak power measurement - The first trace, Set RBW = 1M and VBW ≥ 3M with Peak detector and Max Hold setting.<?xml:namespace prefix = o ns = "urn:schemas-microsoft- com:office:office" /> - The second trace, Set RBW = 1M and VBW ≥ 3M, and run Power Average 100 traces. Please call me to clarify the test method if above is still not clear to you. Best regards, Steve -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, October 16, 2003 3:15 AM To: Steve Cheng Cc: [email protected]; [email protected]; Mike Kuo; [email protected]; [email protected]; [email protected] Subject: RE: ??: RE: AN03T3257-DTS-COMPAL-GKRWM3BAB51 Dear Steve, Please kindly check this project in advance and if possible, please issue the grant to us tomorrow because Compal really can't wait. Thank you and best regards, Lucy ----- 轉呈者 lucy_tsai/ccsemc 於 2003/10/16 06:13 PM --- -- eric 黃勁武 2003/10/16 11:44 AM 收件人： [email protected] 副本抄送： eric/ccsemc@ccsemc, salena/ccsemc@ccsemc, julia_wei/ccsemc@ccsemc, skang/ccsemc@ccsemc, jonson/ccsemc@ccsemc, miro/ccsemc@ccsemc, lucy_tsai/ccsemc@ccsemc, [email protected], [email protected] 主旨： RE: ??: RE: AN03T3257-DTS-COMPAL- GKRWM3BAB51 Hi, Steve, This is the replies for the DTS submission, Q5. Regarding to the Ant. spec., as you may seen the evaluation on the spec. is done in 2 ways: solely the ant. itself and tested with the host device, ie the EUT of this submission. The gain we'd used is the gains tested with the host device (EUT) is 3.28dBi (on pg.8). You may find further of this from the documentations re-sent this time. Q6. Please find the report which have been revised per your comment. Thank you!! Should you have any question, please don't hesitate to ask me. Best regards, Eric Wong Compliance Certification Services Inc. (Formerly C&C Laboratory Co., Ltd.) Tel.: +886-3-3240332 Ext.49 Add.: No.81-1, Lane 210, Ba-de 2nd Rd., Luchu Hsiang, Taoyuan Hsien 338, Taiwan, R.O.C. Email: [email protected] URL: http://www.ccsemc.com.tw -------------------------------------------------------------------------------- ----- 轉呈者 eric/ccsemc 於 2003/10/16 11:19 AM ----- salena 楊靜姍 2003/10/14 03:40 PM 收件人： eric/ccsemc@ccsemc 副本抄送： 主旨： RE: ??: RE: AN03T3257-DTS-COMPAL- GKRWM3BAB51 ----- 轉呈者 salena/ccsemc 於 2003/10/14 03:38 PM ----- salena 楊靜姍 2003/10/14 01:34 PM 收件人： miro/ccsemc@ccsemc 副本抄送： 主旨： RE: ??…

Text truncated - open the document above for the full version.

Cover Letter(s)

POWER OF ATTORNEY Date: September 10, 2003 We, the undersigned, hereby authorize C&C Laboratory Co., Ltd. to act on our behalf in all matters relating to all processes related to FCC & IC applications and communications issue. Any and all acts carried out by C&C Laboratory Co., Ltd on our behalf shall have the same effects as acts of our own. If you have any questions regarding this authorization, please don’t hesitate to contact us. Thank you. Sincerely yours, _____________________________ GEORGE CHOU / MANAGER Compal Electronics, Inc.

Cover Letter(s)

Compal Electronics, Inc. August 7,2003 Federal Communications Commission Authorization and Evaluation Division FCC ID: GKRWM3BAB51 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Block diagram and Schematics 2. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, (Signer Name) / (Title) Compal Electronics, Inc

External Photos

Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 62 APPENDIX 2 EXTERNAL PHOTOGRPHS OF EUT Front view of EUT Back view of EUT Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 63 Left view of EUT Right view of EUT Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 64 Open view of EUT Bottom view of EUT Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 65 Front view of Power Adapter Back view of Power Adapter

ID Label/Location Info

FCC / IC ID LABEL FORMAT AND LOCATION Applicant: Compal Electronics Inc. FCC ID: GKRWM3BAB51 IC ID: 2533B-WM3BAB51 FCC ID: GKRWM3BAB51 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. “Complies with Canada RSS-210” TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE IC ID: 2533B-WM3BAB51

ID Label/Location Info

Label Location

Internal Photos

Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 66 APPENDIX 3 INTERNAL PHOTOGRPHS OF EUT Internal of EUT --- 1 Internal of EUT --- 2 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 67 Internal of EUT --- 3 Internal of EUT --- 4 AUX Antenna Position Main Antenna Position Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 68 Internal of EUT --- 5 Internal of EUT --- 6 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 69 Internal of EUT --- 7 Internal of EUT --- 8 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 70 Internal of EUT --- 9 Internal of EUT --- 10 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 71 Internal of EUT --- 11

RF Exposure Info

Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 52 7.12. RADIO FREQUENCY EXPOSURE (15.407) LIMIT U-NII devices are subject to the radio frequency radiation exposure requirements specified in §1.1307(b), §2.1091 and §2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a "general population/uncontrolled" environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. EUT SPECIFICATION EUT Wireless LAN module built in Notebook PC Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others __________________________ Device category Portable (<20cm separation) Mobile (>20cm separation) Others __________________________ Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 17.32 dBm (53.95mW) Antenna gain (Max) 1.06 dBi (Numeric gain: 1.28) Evaluation applied MPE Evaluation* SAR Evaluation N/A Note: 1. *The maximum output power is 17.32dBm(53.95mW) at 5320MHz.. 2. For mobile or fixed location transmitters, no SAR consideration applied. The minimum separation generally be used is at least 20 cm, even if the calculations indicate that the MPE distance would be lesser. Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 53 TEST RESULTS No non-compliance noted Calculation Given d GP E ×× = 30 & 3770 2 E S = Where E = Field Strength in Volts / meter P = Power in Watts G=Numeric antenna gain d=Distance in meters S=Power Density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: S GP d × ×× = 3770 30 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) =100 * d (m) Yields S GP S GP d × ×= × ×× ×=282.0 3770 )1000/(30 100 Where d = distance in cm P = Power in mW G = Numeric antenna gain S = Power Density in mW / cm^2 Substituting the logarithmic form of power and gain using: P (mW) = 10 ^ (P (dBm) / 10) and G (numeric) = 10 ^ (G (dBi) / 10) Yields 20 10 282.0 20 )(GP d + ×= Equation 1 Where d = MPE safe distance in cm P = Power in dBm G = Antenna Gain in dBi S = Power Density Limit in mW / cm^2 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 54 Maximum Permissible Exposure EUT output power = 53.95 mW Antenna Gain = 1.28 S = 1.0 mW / cm^2 from 1.1310 Table 1 Substituting these parameters into the above Equation 1: Æ MPE Safe Distance = 2.34 cm (For mobile or fixed location transmitters, the minimum separation distance is 20 cm, even if calculations indicate that the MPE distance would be less.)

Test Report

Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 1 of 66 FCC 47 CFR PART 15 SUBPART E TEST REPORT For Wireless LAN module built in Notebook PC Brand Name: Compal; acer Model Number: CL51 FCC ID: GKRWM3BAB51 Report No: B30811202-RP Issue Date: September 9, 2003 Prepared for Compal Electronics Inc. No. 581, Jui Kuang Rd., Neihu, Taipei, (114) Taiwan, R.O.C. Prepared by Compliance Certification Services Inc. No. 81-1, Lane 210, Bade Rd. 2, Luchu Hsiang, Taoyuan Hsien, (338) Taiwan, R.O.C. TEL: 886-3-324-0332 FAX: 886-3-324-5235 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. Ltd. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 2 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 3 2. EUT DESCRIPTION..................................................................................................................... 4 3. TEST METHODOLOGY ............................................................................................................. 5 3.1 EUT CONFIGURATION.............................................................................................................. 5 3.2 EUT EXERCISE......................................................................................................................... 5 3.3 GENERAL TEST PROCEDURES.................................................................................................. 5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ............................................. 6 3.5 DESCRIPTION OF TEST MODES................................................................................................. 6 4. INSTRUMENT CALIBRATION ................................................................................................. 7 5. FACILITIES AND ACCREDITATIONS ................................................................................... 8 5.1 FACILITIES...............................................................................................................................8 5.2 EQUIPMENT............................................................................................................................. 8 5.3 LABORATORY ACCREDITATIONS AND LISTING....................................................................... 8 5.4 TABLE OF ACCREDITATIONS AND LISTINGS............................................................................ 9 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................ 10 6.1 SETUP CONFIGURATION OF EUT............................................................................................ 10 6.2 SUPPORT EQUIPMENT............................................................................................................ 10 7. FCC PART 15 REQUIREMENTS............................................................................................. 11 7.1. BAND EDGES MEASUREMENT...................................................................................... 11 7.2. POWERLINE CONDUCTED EMISSION (15.207)........................................................................ 16 7.3. 26 DB EMISSION BANDWITH (15.403) ................................................................................... 20 7.4. PEAK POWER (15.407) ........................................................................................................... 24 7.5. PEAK POWER SPECTRAL DENSITY (15.407) ........................................................................... 28 7.6. PEAK EXCURSION (15.407).................................................................................................... 31 7.7. CONDUCTED UNDESIRABLE EMISSION (15.407).................................................................... 35 7.8. RADIATED UNDESIRABLE EMISSION (15.407) ....................................................................... 42 7.9. TRANSMISSION IN ABSENCE OF DATA (15.407)..................................................................... 49 7.10. FREQUENCY STABILITY (15.407) .......................................................................................... 50 7.11. ANTENNA REQUIREMENT (15.407)........................................................................................ 51 7.12. RADIO FREQUENCY EXPOSURE (15.407) ............................................................................... 52 Compliance Certification Services Inc. Report No: B30811202-RP FCC ID: GKRWM3BAB51 Date of Issue: September 9, 2003 Page 3 1. TEST RESULT CERTIFICATION Applicant: COMPAL ELECTRONICS, INC. No. 581, Jui Kuang Rd., Neihu, Taipei (114), Taiwan, R.O.C. Equipment Under Test…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Joyce Ting(Senior RF Regulatory Compliance Engineer)

[email protected]886-2-8797-8599Fax: 886-2-2658-6080

Test Firm

Compliance Certification Services Inc.Kurt Chen

[email protected]886-2-86422071Fax: 886-2-86422256

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15E	5.18 GHz - 5.32 GHz	54.00 mW

Confidentiality

Long Term

Grant Notes

Output power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.