H9P2164436WLAN module

The 24-64436 PCB is logically divided into two parts: a digital/analog system and a radio. Both are located on the same PCB, however are physically separate from each other. The Figures 1 and 2 below depicts a block diagram of the entire PCB system. The on-board radio (which is being type approved) is shown here as only one of the blocks. Legend: Core Main Terminal Module (MTM) LH ASIC 32/64 MByte Strata Flash 3.6MHz resonator Reset Circuit Backup battery charger & regulator PXA255 XScale CPU @ 400Mhz 32/64/128 MByte SDRAM 1.3V Core & PLL Supply Data Buffers (Level 1) Addr./Ctrl Buffers (Level 1) 3.3V @ 3A Power Supply T3 802.11b Integrated Radio Scanner/ Decoded Conn. (25) Display Conn. (51) 3.6MHz crystal Main Battery Charger Color interface, LCD & TP Mono interface, LCD & TP 1D (SE1200HP) or 2D (SE2200) Pico Imager or color camera Decoded Scanner FFUART (SE1224, Lorax) Trig<2..3> Conn. (3) Trigs. (handle or side triggers) Imager Conn. (30) Two Antennas (diversity) Outhouse CPLD I/O Connector (main flex) (100) 2 Option connectors (80 pins each) OLED interface, display (future) Keypad EL Panel backlight driver Piezo speaker supply & driver RS232 Driver from ASIC UART1 3 cell NiMH backup batt Backup battery connector (2) External 3.3V power switch & current limit USB 5V detect Main flex related - all ESD & EMI protected (numbers in parantheses represent the number of pins on the MTM connectors) EMI / noise filtering 32.768 KHz oscillator Power Micro Address & Data Buffers (Level 2) TP Conn. (4) Off-board component Connector Logical or physical grouping of components/ connections Two antenna connectors EMI Protected EMI Protected EMI Protected EMI Protected EMI Protected EMI Protected Figure 1: High level block diagram – entire PCB Main Flex Conn (10) Cotulla XScale CPU BBX_ADDR[0..25] (5)Power Micro Touch Panel SPI Main Flex Connector Imaging Connector (30) PC Slot 0 Scanner Interface UART 1 Imaging Matrix Keyboard D_DIR & BUF_EN Address (0-25) Control Reset Chip Selects I/O Device Bus (50) PC Slot A (20) (16) (8) RESET Chip Power FET 3.3V Keyboard Backlight 32.768 KHz 32.768 KHz 3.3V Regulator (also input switching) 3.3V Power Fault Detect Backup Charger Battery Backup Connector (2) 3.0V reg. 3.68MHz Resonator SPI FFUART MMC/SD IrDA (used for keypad comm) BX_DATA[0..16] UART2/DEBUG UART1+PWR+CTRL Smart Battery I2C_BATT ACIN 802.11b S24 radio (T3 CF) BT UART+CTRL Display Connector (51) Cotulla-side option connector (80 pins) Main Flex Connector JTAG 48 MHz 3.6864 MHz 48 MHz 2 Cell Li- Ion Charger Chip Selects Reset (BUFEN) Reset_in JTAG USB (4) 3.3VRAW_DC CORE_EN CORE_EN BE* POWER_FAULT* BATT_FAULT* BATT_FAULT* (4) LH_ IRQ I/O Device BusUART 2 Power Switch* PWR_SW* Trig[0..4]* Trigger Connector (3) TRIG[2..3]* COMM LED Data LCD I/O Devices Address Control PWR_EN GPIO7 / 48MHz LH_IRQ ⇔Buffer (32 bit) ⇔Buffer (32 bit) BX_DATA[0..31]XM_DATA[0..31] XM_ADDR[0..25] Control (9) Add [10..24] (32) SDRAM 32/64MB/128MB (x2) Strata Flash (J3 or K3) 32/64MB (x2) (32) Add [2..25] Control (6) ⇔Buffer (16 bit) SDRAM ctrl (9) SDRAM ctrl (9) Data (0-31) LCD Signals LCD Signals (20) Core & PLL Power Supplies 32.768 kHz Osc. 32.768 KHz From I/O Device Bus (I2C and GPIO) I2C (2),GPIO (2) To Imaging Connector 1D/2D/ Decoded Scanner (25) (16) GPIO0/ PWRSW Power Switch* FUNC LED SCAN LED DECODE LED Main Flex Connector UART 1_ENABLE EXT_PWR_EN CRADLE_DET JTAG (5) From I/O Device Bus TRIG[0..1]* JTAG (5) To Communications Connector (BUFEN) To Power Micro SDCS0* CS[0..5] CS0* CS0*, CS1*,CS4* 3A max BATT+ (2A max) BATT- (2A max) Note: Battery is 7.2V >=2200mAH (2) BE* RESET* Logic for JTAG and debug Reset_out RESET* (4) TP RAW_DC I/O register (part of Outhouse CPLD) To various places, see detailed matrix BX_DATA[16..23] BX_ADDR[17..19] LH ASIC DBG_CS* BT_MEDIUM_FREE (to option board conn) TRIG0*&4*To option board conn BATT_EMERGENCY EXT_CS* EXT_CS* 3.6864 MHz CORE_EN* PWR_SW* +3.3V +5V (for Corona) Main Flex Connector (POWER_IN) Debounce (part of Outhouse CPLD) 3.6864 MHz3.6MHz RESET IC (2) SDCS1* Controlled by ASIC Logic for BATT_FAULT (MBGNT) ⇔Buffer (16 bit)BBX_DATA[0..16] CS0* (TO FLASH) BX_ADDR[0..25] =>Buffer (32 bit) PCMCIA SLOT B CTRL (20) ASIC-side option connector (80 pins) +3.3V RAW_DC 3.6864 MHz Control Control Control (9) Sync Flash Ctrl (2) - SDCLK0 & SDCAS LEVEL 2 BUFFER ENABLE LOGIC CONTROL AUDIO_INTO_MTM Piezo speaker power supply & driver Main Flex Connector TRIG0* & TRIG4* RAW_DC 3.6864 MHz R/W BUFF_3.6864 MHz BUFF_R/W Analog MUX BEEP (from ASIC) CODEC_PRESENT Voltage detector 3.6864 MHz CPLD_CLK_32K CPLD_CLK_32K Figure 2: Detailed block diagram – entire PCB Figures 3 and 4 below depict detailed block diagrams of the on-board radio. Figure 3: Overall block diagram of on-board radio Radio Prism 2.5 Based PCMCIA Host I/F SRAM HFA3873 MicroController EEPROM Clock Figure 4: Intersil Prism 2.5 chipset (basis for on-board radio)

Modular Approval: Type: 21-64436 Regulatory Compliance Symbol Technologies, Inc. Page 1 of 1 Modular Approval – Statement/01 1. The modular transmitter must have its own RF shielding. Provided - see drawing ‘21-64436-XX Exploded Assy with Shield’ 2. The modular transmitter must have buffered modulation/data inputs. Provided - see schematic drawing ‘Schematic 17-64436-01r2.pdf’, sheet 4, sections A-1 through A-6, component U3 (Lighthouse ASIC). 3. The modular transmitter must have its own power supply regulation. Power supply regulation is provided. For voltage regulator, see schematic drawing “Schematic 17-64436-01r2.pdf”, sheet 14, sections A-1, A2, B-1, and B-2, components U14, C11, C15, C17, C18, C117, R25, C28, Q10, R220, L13, C191, R218, R219, C43, and TL2. Additional switching and isolation are provided on sheet 5, sections D-5, D-6, and D-7, components R126, R134, Q301, C230, C301, R225, Q21, C302, L301, C304, C303, B302, C326, B303, C306, and C305, and on sheet 7, sections D-6 and D-7, components U4, C80, C106, R20, C79, and Q4. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna. See schematic drawing ‘Schematic 17-64436-01r2.pdf’, sheet 7, section C-8. The antenna connections to the module (J1, J2) will be internal to the products utilizing the module and will therefore be non-user accessible. 5. The modular transmitter must be tested in a stand-alone configuration. Confirmed, see FCC Test Report. 6. The modular transmitter must be labeled with its own FCC ID number. Confirmed, see Label Drawing ‘69-62653-01.pdf’ 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization Confirmed, see ‘Main Terminal Module Integration Guide’ 8. The modular transmitter must comply with any applicable RF exposure requirements. Confirmed – see SAR Test Report.

SYMBOL TECHNOLOGIES. Symbol Place, Winnersh Triangle, Berkshire, England RG41 5TP Telephone: +44 (0) 118 945 7000 Fax: +44 (0) 118 945 7500 Web site: www.symbol.com Registered Office: Symbol Place, Winnersh Triangle, Berkshire RG41 5TP Registration No. 1096253 - England MB/Confidentiality/ 21-64436 13 th November 2003 BABT 34 Molesey Road WALTON-ON-THAMES Surrey KT12 4RQ Request of Confidentiality: Symbol Technologies Inc. Product Type: 21-64436 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Symbol Technologies Inc. hereby requests confidential treatment of information accompanying as outlined below: • Schematics • Bill of Materials • Theory of Operation • Integration Guide The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected] EMEA Division

Exhibit 3 Please see TUVPS report nos. OR611514/02 issue 1

PROD FAM: GEMINI DESCRIPTION: LBL:LCD,RADIO MODULE , GEMINI CTRY CODE: N/A COUNTRY: N/A SN POOL: STANDARD LBL STOCK PN: 63-62647-01 SEE NOTE 2 LBL SCRIPT : *SEE NOTE 1 CCG1:M119 NOTES: UNLESS OTHERWISE SPECIFIED 1. SCRIPT FILE TO BE CREATED BY MANUFACTURING. SCRIPT FILE MUST MATCH THIS DOCUMENT EXACTLY. 2. LABEL STOCK P/N IS SUBJECT TO CHANGE. CHECK BOM FOR ACTUAL P ART NUMBER. 3. IN ALL CASES "XXX......" REPRESENTS VARIABLE FIELDS IN SCRIPT FILE. ACTUAL NUMBER OF CHARACTERS IN SCRIPT FILE MAY V ARY. 4. IN THE CASE OF MULTIPLE APPROVALS THE ID NUMBER AND TYPE NUMBERS APPEAR IN SAME ORDER. 5. PART NUMBER MAY OR MAY NOT HAVE DASH BEFORE COUNTRY CODE. SEE BOM FOR ACTUAL MODEL DESCRIPTION. 6. MONTH AND YEAR IF REQUIRED(IE: NOVEMBER, 2002) 7. COUNTRY OF ORIGIN REQUIRED 8. ADD VARIABLE FIELD FOR PLANT CODE E DR 71042 69-62653-01. A S E E N O T E 5 S E E N O T E 6 S E E N O T E 7 A N D 8 S E E N O T E 7 A N D 8 preliminary XXXX MFD: XXXXXXXXXXX,XXXX BAR CODE MADE IN XXXXXX RLAN TYPE: 21-64436 POWER: MAX 100 mW FREQ: MAX 2.400-2.4835 GHz R XXXXXXXXXX XXXXXXXXXX TYPE: 21-64436 2.4DS4 FCC: H9P2164436 IC: 1549D-2164436 N410 PN : 21-64436-XX S/N AA00BB00EAXXX 0168 SYMBOL TECHNOLOGIES INC., HOLTSVILLE N.Y. RED LINES DO NOT PRINT INDICATE .200 X .200 KEEP OUT AREAS (2 PLS) 10/30/03

Exhibit 9 Please see TUVPS report nos. OR611514/02 issue 1

TEST REPORT Limited FCC CFR 47: Part 15 Testing in support of an Application for Grant of Equipment Authorisation of a Symbol 21-64436 Main Terminal Module (MTM) with embedded Radio FCC ID: H9P2164436 Report Number: OR611514/02 Issue 2November 2003 BABT. Segensworth Road, Titchfield Fareham, Hampshire, United Kingdom, PO15 5RH Tel: +44(0) 1329 443300, Fax: +44(0) 1329 443331 www.babt.com Report Number OR611514/02/Issue 2Page 1 of 89 REPORT ONLimited FCC CFR 47: Part 15 Testing in support of an Application for Grant of Equipment Authorisation of a Symbol 21-64436 Main Terminal Module (MTM) with embedded Radio FCC ID: H9P2164436 Report No OR611514/02 Issue 2 November 2003 EQUIPMENT:21-64436 Main Terminal Module with embedded Radio FCC ID:H9P2164436 SPECIFICATION:FCC CFR 47: Part 15, August 2002 PREPARED FOR:Symbol Technologies Inc One Symbol Plaza Holtsville NY 11742-1300 New York United States of America MANUFACTURERS REPRESENTATIVE:Mr Marco Belli APPROVED BY: C H GOULDM JENKINS EMC SignatoryRadio Signatory DATED:25/11/03 25/11/03 DISTRIBUTIONSymbol TechnologiesCopy 1 (CD) TÜV Product ServiceCopy 2 Copy No Total No of Pages 91 (Including Annex A) ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47: Part 15. The sample tested was found to comply with the requirements defined in the applied rules. Test Engineers; A Guy B Airs Report Number OR611514/02/Issue 2Page 2 of 89 FCC ID: H9P2164436 Table of Contents Page No STATUS...........................................................................................................................................................3 TEST RATIONALE .........................................................................................................................................4 SYSTEM CONFIGURATION ......................................................................................................................... 4 TEST SETUP PHOTOGRAPH ......................................................................................................................5 EQUIPMENT INFORMATION........................................................................................................................6 SPURIOUS RADIATED EMISSIONS............................................................................................................8 MEASUREMENT AT THE BAND EDGE (MARKER DELTA METHOD) ....................................................15 CONDUCTED EMISSIONS ON POWER LINES .........................................................................................19 6dB BANDWIDTH...........................................................................................................................................23 MAXIMUM PEAK OUTPUT POWER ............................................................................................................36 SPURIOUS CONDUCTED EMISSIONS ON ANTENNA PORT .................................................................38 SPURIOUS RADIATED EMISSIONS............................................................................................................75 PEAK POWER SPECTRAL DENSITY..........................................................................................................82 PHOTOGRAPHS OF EQUIPMENT ..............................................................................................................83 MANUFACTURERS LABEL DIAGRAM........................................................................................................87 SYSTEM MEASUREMENT UNCERTAINTY................................................................................................88 COPYRIGHT STATEMENT ..........................................................................................................................89 FCC SITE COMPLIANCE LETTERAnnex A Report Number OR611514/02/Issue 2Page 3 of 89 FCC ID: H9P2164436 STATUS OBJECTIVETo undertake measurements to determine the Equipment Under Test's (EUT's) compliance with the specification. MANUFACTURING DESCRIPTIONMain Terminal Module (MTM) with embedded Radio APPLICANTSymbol Technologies Inc One Symbol Plaza Holtsville NY 11742-1300 New York United States of America MANUFACTURERS TYPE NUMBER21-64436 MANUFACTURERS PART NUMBER21-64436-01 SERIAL NUMBER00A0F85DBE93 HARDWARE REVISIONRev 2 TEST SPECIFICATION NUMBERFCC CFR 47: Part 15 Subparts B and C, August 2002 REGISTRATION NUMBEROR611514 QUANTITY OF ITEMS TESTEDOne SECURITY CLASSIFICATION OF EUTUnclassified INCOMING RELEASEDeclaration of Build Status SERIAL NUMBEROR611514 DATE13 th October 2003 DISPOSALHeld pending disposal REFERENCE NUMBERN/A DATEN/A START OF TEST15 th October 2003 FINISH OF TEST3 rd November 2003 TEST ENGINEERSA Guy B Airs RELATED DOCUMENTSANSI C63.4 2001. Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. FCC Public Notice document (DA 00-705 released 30 March 2000) Report Number OR611514/02/Issue 2Page 4 of 89 FCC ID: H9P2164436 TEST RATIONALE The information contained within this report is intended to show verification of compliance of the Symbol Technologies Inc 21-64436 MTM with embedded radio to the requirements of FCC Specification Part 15 - Modular Approval. FCC ID H9P2164436 The unit supplied for testing was a 21-64436 Main Terminal Module with embedded Radio, which offers 2.4GHz 802.11b Wireless LAN connectivity. The Symbol 21-64436 MTM (EUT) was configured for all tests powered via Symbol supplied "Test Jig" (p/n 3735-1000-0-000), 120V 60Hz ac Power Supply Unit (p/n 50-14001-008) and was connected to the "Host" Laptop Computer via a Cardbus Adaptor (p/n 3735-2000-3-001), PC Extender Card (p/n 140A- 12773) and Cable Assembly (p/n 3188B). The EUT was supplied with two Antennas as shown in Photograph 5. Maximum…

Text truncated - open the document above for the full version.

Exhibit 7 Please see TUVPS report nos. OR611514/02 issue 1