H9PEMG101802.15.4 Gateway

EMG101 Gateway INSTALLATION GUIDE MN000995A01.fm Page 1 Tuesday, August 26, 2014 2:27 PM 2EMG101 Gateway Symbol® is a registered trademark, and The Enterprise Mobility Company is a trademark of Symbol Technologies, Inc. All other trademarks and service marks are proprietary to their respective owners. © 2014 Symbol Technologies, Inc. All Rights Reserved. MN000995A01.fm Page 2 Tuesday, August 26, 2014 2:27 PM Installation Guide3 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.0 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 EMG101 Gateway Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.3 Power Injector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.5 Wall Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.6 Suspended Ceiling T-Bar Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.7 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.0 Basic Gateway Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.1 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.2 Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.3 Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.0 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.1 Regulatory Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.2 Wireless Device Country Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.2.1 Frequency of Operation - FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.3 Health and Safety Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.3.1 Warnings for the use of Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . 17 5.4 RF Exposure Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.4.1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.5 International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.6 Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 MN000995A01.fm Page 3 Tuesday, August 26, 2014 2:27 PM 4EMG101 Gateway 5.7 US and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.8 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.9 Radio Frequency Interference Requirements - FCC . . . . . . . . . . . . . . . . . . . . . . 18 5.10 Radio Frequency Interference Requirements - Canada . . . . . . . . . . . . . . . . . . 19 5.10.1 Radio Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5.11 CE Marking and European Economic Area (EEA) . . . . . . . . . . . . . . . . . . . . . . . 20 5.12 Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.14 Waste Electrical and Electronic Equipment (WEEE). . . . . . . . . . . . . . . . . . . . . 21 5.15 Turkish WEEE Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 6.0 Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MN000995A01.fm Page 4 Tuesday, August 26, 2014 2:27 PM Installation Guide5 1Introduction EMG101 Gateways are components of Symbol Technologies Wireless Controller System. An EMG101 Gateway links to wireless 802.15.4 electronic shelf label tags. It installs in minutes anywhere a CAT-5e (or better) cable is located. The EMG101 Gateway ships with two single-band 2.4GHz 802.15.4 radios. The radios are configured for redundant operation. If the currently operating radio fails, the gateway will automatically activate the second radio. The EMG101 Gateway is approved under MODEL: EMG101. Symbol recommends the EMG101 Gateway receive power and transfer data through the same CAT-5e (or better) Ethernet cable using a Symbol Power Injector. The Power Injector ((Part No. AP-PSBIAS-2P2-AFR) is an 802.3af PoE injector. For information, see Power Injector System. A separate power supply (Part No. PWRS-147376-01R) is also available if you do not wish to use a Power Injector. This standard power supply just…

Text truncated - open the document above for the full version.

Regulatory Engineering Symbol Technologies, Inc. One Motorola Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.motorolasolution.com Date: Aug11, 2014 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Letter of Authorization Letter As the designated signatory for FCC applications under the Grantee code H9P (Symbol Technologies, Inc.), I hereby authorize Marco Belli to sign all corresponding application documents relating to the processes of FCC Approval. This authorization is limited to the following FCC ID(s) FCC ID: H9PEMG101 If you have any questions regarding the authorization, please don’t hesitate to contact me. Respectfully, Mark S. Luksich Symbol Technologies, Inc. Tel: 631 738 5134 [email protected]

Report No.: 140808E01 Page No. 1 / 13 CONSTRUCTION PHOTOS OF EUT Model No.: EMG101 Report No.: 140808E01 Page No. 2 / 13 Report No.: 140808E01 Page No. 3 / 13 Rev 2.0 Report No.: 140808E01 Page No. 10 / 13 Rev 1.0 Report No.: 140808E01 Page No. 11 / 13 Rev 1.0 Report No.: 140808E01 Page No. 12 / 13 Rev 1.0 Report No.: 140808E01 Page No. 13 / 13 Rev 1.0

TITLE: Unless otherwise tolerence specified MODEL NO F 21 DESCRIPTION NO DATE E D SCALE: Universal Scientific Industrial Co.,Ltd. 3 APP BY DESIGNER ± 0.25 USI R DATE DATE 4 SHEET UG/CVS/SHD1/KSED/MDE SOURCE ORGANIZATION DWG NO USI P/N UNIT: REV F E D C B A 1 2 C B 34 A mm 1/1 59-467412-01 2B-048916 MFG LABEL FOR Gateway A2 Note: 1.P/N:Customer Part Number:Refer PDM Page Two “Customer P/N” 2.S/N :Shipping Serial number. 4.MFG Date: DDMMMYY 3.MAC:control with SFIS . TEXT:5C0E8B0839F3 Barcode data:5C0E8B0839F3 SSSS:Serial Number:from 0001 to 9999. The start at 0001 at the beginning of every day. DDD(Manufactur days):001-365. YY(Manufacture years):2009=09;2010=10;2011=11.... DD(Manufacture days):01,02,03,04,05,06,07,08,09,10.... MMM(Manufacture months):1=JAN;2=FEB;3=MAR;4=APR;5=MAY; YY(Manufacture years):2009=09;2010=10;2011=11.... 5.REV:, SFIS upgrade list. Barcode data:A 6.Product country of origin:TEXT:MADE IN CHINA Barcode data:CN FOR EXAMPLE:EMG101-001-P001 1.USI PN:59-530476-01 UL Marking:WAI GHA,MH25635 PGJI2,WG-7815-MW KS 06/19’14 06/19’14 Qing Jeffl 1 A2 S/N:It must match serial number on unit, Barcode data:YYDDDZZZZPSSSS S/N:YYDDDZZZZPSSSS USI SHUSI KS Shanghai Kunshan MADE IN Factory ID USHCKS Note1:Country Origin 6.UL Certifications: Company Name(WAI GHA),UL File Number(MH25635); 5.UL File Number(PGAA-LP1197); UL Category Code: PGJI2, WG-7815-MW 4.Suggestion for ink ( ):OUT B110CR RICOH UL File Number(MH28243);PGJI2 3. Bar code format( ): Code 128 2.Color of print area( ):White paper;Black text(; A3 A4 A5 A6 A7 A8 A9 Barcode data:EMGXXX-XXX-XXXX 6=JUN;7=JUL;8=AUG;9=SEP;10= OCT;11=NOV;12=DEC. All Pre EV or Prototype units : P; All EV units :E; All DV units : D MV and Production units back to normal format : 0 to 9. P/N: EMGXXX-XXX-XXXX DDDDDDDDDDDDD MAC: 5C0E8B0839F3 MADE IN CHINA DDDDD DDDDDDDDDDDDD MFG Date:23FEB11 DDDDD MODEL: EMG101 FCC ID: H9PEMG101 REV:A This device complies with part 15 of the FCC Rules. Operation is subject to the following S/N: YYDDDZZZZPSSSS DDD DDDDDDDDD IC ID: 1549D-EMG101 Symbol Technologies, Inc. Holtsville, N.Y. 11742 two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. KS IP: 48V 125 mA 5 4 6 1 2 3 1177 07/01’14 Change brand from “Motorola” to “Symbol”. Modify FCC & IC ID number & material’s USI P/N. (Fig. 1) FCC ID: H9PEMG101 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Report No.: 140808E01 Page No. 4 / 13 Model No.: EMG101 Report No.: 140808E01 Page No. 5 / 13 Report No.: 140808E01 Page No. 6 / 13 Report No.: 140808E01 Page No. 7 / 13 Report No.: 140808E01 Page No. 8 / 13 Report No.: 140808E01 Page No. 9 / 13

Report No.: SA140808E01 R1 1 of 6 Report Format Version 5.0.1 Cancels and replaces the report No.: SA140808E01 dated Aug. 21, 2014 RF EXPOSURE REPORT REPORT NO.: SA140808E01 R1 MODEL NO.: EMG101 FCC ID: H9PEMG101 RECEIVED: July 10, 2014 TESTED: Aug. 12, 2014 ISSUED: Aug. 26, 2014 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA MANUFACTURER: Symbol Technologies, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140808E01 R1 2 of 6 Report Format Version 5.0.1 Cancels and replaces the report No.: SA140808E01 dated Aug. 21, 2014 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 6 Report No.: SA140808E01 R1 3 of 6 Report Format Version 5.0.1 Cancels and replaces the report No.: SA140808E01 dated Aug. 21, 2014 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140808E01 Original release Aug. 21, 2014 SA140808E01 R1 Modified the antenna information on section 5. Aug. 26, 2014 Report No.: SA140808E01 R1 5 of 6 Report Format Version 5.0.1 Cancels and replaces the report No.: SA140808E01 dated Aug. 21, 2014 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Gain (dBi) Exclude cable loss Cable Loss (dB) Net Gain (dBi) Connecter Type Frequency range (MHz to MHz) Antenna Type 3.2 0.47 2.73 NA 2400~2500 Dipole Report No.: SA140808E01 R1 6 of 6 Report Format Version 5.0.1 Cancels and replaces the report No.: SA140808E01 dated Aug. 21, 2014 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER Radio circuit 1: FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2405 ~ 2475 26.485 2.73 20 0.00988 1 Note: Directional gain = 5dBi + 10log(2) = 8.01dBi. Radio circuit 2: FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2405 ~ 2475 24.831 2.73 20 0.00926 1 Note: Directional gain = 7dBi + 10log(2) = 10.01dBi. --- END --- CONCLUSION: Both of the radio circuit 1 and radio circuit 2 can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.00988 / 1 + 0.00926 / 1= 0.019, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: RF140808E01 R1 1 of 64 Report Format Version 5.2.1 Cancels and replaces the report No.: RF140808E01 dated Aug. 21, 2014 FCC TEST REPORT REPORT NO.: RF140808E01 R1 MODEL NO.: EMG101 FCC ID: H9PEMG101 RECEIVED: July 10, 2014 TESTED: July 10 to Aug. 12, 2014 ISSUED: Aug. 26, 2014 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA MANUFACTURER: Symbol Technologies, Inc. ADDRESS: One Motorola Plaza Holtsville NY 11742-1300 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140808E01 R1 2 of 64 Report Format Version 5.2.1 Cancels and replaces the report No.: RF140808E01 dated Aug. 21, 2014 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 14 3.4 DUTY CYCLE OF TEST SIGNAL ........................................................................... 14 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 15 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 16 4. TEST TYPES AND RESULTS ................................................................................ 19 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 19 4.1.2 TEST INSTRUMENTS ........................................................................................... 19 4.1.3 TEST PROCEDURES ............................................................................................ 20 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 20 4.1.5 TEST SETUP ......................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 21 4.1.7 TEST RESULTS (MODE 1) .................................................................................... 22 4.1.8 TEST RESULTS (MODE 2) .................................................................................... 26 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 30 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 30 4.2.2 TEST INSTRUMENTS ........................................................................................... 31 4.2.3 TEST PROCEDURES ............................................................................................ 33 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 33 4.2.5 TEST SETUP ......................................................................................................... 34 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 35 4.2.7 TEST RESULTS (MODE 1) .................................................................................... 36 4.2.8 TEST RESULTS (MODE 2) .................................................................................... 42 4.3 6dB BANDWIDTH MEASUREMENT ..................................................................... 48 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ............................…

Text truncated - open the document above for the full version.

Report No.: 131022E08 Page 1 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Adapter Mode) Report No.: 131022E08 Page 2 Reference No.: CONDUCTED EMISSION TEST (POE Mode) Report No.: 131022E08 Page 3 Reference No.: RADIATED EMISSION TEST (Below 1GHz) RADIATED EMISSION TEST (Above 1GHz)