H9PCCHUB1Customer Concierge

CONCIERGE CC5000-10 SET UP and INSTALLATION GUIDE MN001103A01a.fm Page 1 Monday, March 23, 2015 2:50 PM 2CONCIERGE CC5000-10 Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described in this guide. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty. For Australia Only This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at +65 6858 0722. You may also visit our website: http://www.zebra.com/warranty for the most updated warranty terms. Service Information If you have a problem using the equipment, contact your facility's Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Customer Support Center at: http://www.zebra.com/support. MN001103A01a.fm Page 2 Monday, March 23, 2015 2:50 PM Setup and Installation Guide3 Concierge CC5000-10 Features Figure 1. Front View Figure 2. Rear View Bar Code Scanner Audio Microphone 10 in.Touchscreen Display Front Facing Video Camera External Speakers VESA Mounting Holes (M4 Threaded) MN001103A01a.fm Page 3 Monday, March 23, 2015 2:50 PM 4CONCIERGE CC5000-10 Figure 3. Ports Overview The Concierge CC5000-10 is a pre-assembled system consisting of the following: • 10.1 in. touchscreen display • Concierge Main PCB, 8MP Camera, Speakers, Mic, Flash Memory, Network Interface, Peripheral Ports • Bar code scanner • Bezel enclosure • Associated pre-wired cabling. The final system hardware configuration may change based upon customer preference, including additional accessories (sold separately). The final system mounting/installation is determined by the customer (e.g., mounting the system on a wall, on a stand, or within a customer designed enclosure). Ensure the mounting configuration allows end-users to easily interact with the Concierge CC5000-10 touchscreen, and allows adequate space for end-users to scan products using the bar code scanner. Unpacking Carefully remove the Concierge CC5000-10 from the packaging to avoid damaging the touchscreen display. Once removed from its packaging, inspect the device for damage. Retain the packaging as it is the approved shipping container, and should be used if the Concierge CC5000-10 needs to be returned for servicing. Cleaning and Maintenance • Always turn off the Concierge CC5000-10 before cleaning. • The touchscreen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners. • Use a soft cloth moistened with mild detergent to clean the display housing. • Do not touch the display screen surface with sharp or hard objects. USB Ports Diagnostic Mode Buttons RJ45 Ethernet Port, PoE Enabled Micro USB OTG Port Micro HDMI Out Port Activity LED MN001103A01a.fm Page 4 Monday, March 23, 2015 2:50 PM Setup and Installation Guide5 • Do not use abrasive cleaners, waxes or solvents for cleaning. • Do not operate the product under the following conditions: •Extremely hot, cold, or humid environments. •Near any appliance generating a strong magnetic field. •In direct sunlight. Configuration Notes The instructions, and screen captures in this guide describe default software applications included with the Concierge CC5000-10. Customers and/or partners may develop, and install additional custom software applications which run on the Concierge CC5000-10. In addition, customers and/or partners may choose to add their own hardware accessories prior to installation. Therefore, actual software and hardware configurations may vary at individual sites. For more information go to: https://developer.zebra.com/community/technologies/concierge. Mounting the Concierge CC5000-10 Mounting brackets are not sold with the Concierge CC5000-10 system. Obtain the appropriate mounting brackets to mount the Concierge CC5000-10 using a mounting bracket which complies with the VESA mounting standard(100 mm x 100 mm) The total weight of the Concierge CC5000-10 system (without additional accessories, or modifications is 3 lbs/1.4 kg). For safety purposes, mounting brackets should be certified to support the total weight of the final system (including additional accessories, or modifications by the customer). NOTE The instructions in this guide provide basic installation guidance for the Concierge CC5000-105 system. WARNING!Always utilize professional installers to safely install, mount, and supply power to the Concierge CC5000-10. Always ensure Concierge CC5000-10 mounting, and power routing meets regional building codes. IMPORTANTThe wall outlet must be located near the Concierge CC5000-10, and be easily accessible. MN001103A01a.fm Page 5 Monday, March 23, 2015 2:50 PM 6CONCIERGE CC5000-10 To mount the Concierge CC5000-10 using the appropriate mounting bracket: 1.The Concierge CC5000-10 mounting inserts are M4 x …

Text truncated - open the document above for the full version.

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m June 1, 2015 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Letter of Authorization and Attestations for FCC ID: H9PCCHUB1 To the commission: Authorization We, the undersigned, hereby authorize Andrea Hsia / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s Manual Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Production – Continuous Compliance We certify that submitted documents properly describe the device or system for which equipment certification is sought. Labeling In Addition, we also certify that each unit manufactured, imported or marketed, as defined in FCC’s regulations will have affixed to it a label identical to that submitted for approval with this application. Ownership In Addition, we also acknowledges that all responsibility for complying with the terms and conditions for Certification, still resides with Motorola Solutions, Inc., 1 Zebra Plaza, Holtsville, New York 11742 US. EMC Compliance In Addition, we, as the grantee of this project FCC ID: H9PCCHUB1, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. TPC Support In Addition, we, attest that this device does support “TPC” Transmit Power Control in the 5 GHz UNII bands and the software and associated drivers to support TPC are built into the device firmware, with no mechanism to disable or turn off TPC. DFS Support In Addition, we attest that this device does not support access, by any party (End User or Professional Installer), to disable DFS. There are no controls or selections in the product firmware that can turn off/disable DFS. Limited Accesses In Addition, we, declare that this device doesn’t have Ad Hoc function on “non-US frequencies” and/or “on DFS frequencies”. In non-associated mode, that software and associated drivers will not initiate any transmission on DFS frequencies. This includes transmissions for beacon, ad-hoc, and peer-to-peer modes. Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Continuing Compliance In Addition, we will ensure that our device under FCC ID: H9PCCHUB1 submitted by means of this application, will be continuously produced in compliance with FCC regulations. In relation to this, we accept all consequences of market surveillance performed by FCC or acting Certification Body as specified in the FCC’s regulations. If you have any questions regarding this authorization, please contact me directly. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 [email protected]

Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m June 1, 2015 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Letter of Authorization and Attestations for FCC ID: H9PCCHUB1 To the commission: Authorization We, the undersigned, hereby authorize Andrea Hsia / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s Manual Internal Photos Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Production – Continuous Compliance We certify that submitted documents properly describe the device or system for which equipment certification is sought. Labeling In Addition, we also certify that each unit manufactured, imported or marketed, as defined in FCC’s regulations will have affixed to it a label identical to that submitted for approval with this application. Ownership In Addition, we also acknowledges that all responsibility for complying with the terms and conditions for Certification, still resides with Motorola Solutions, Inc., 1 Zebra Plaza, Holtsville, New York 11742 US. EMC Compliance In Addition, we, as the grantee of this project FCC ID: H9PCCHUB1, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. TPC Support In Addition, we, attest that this device does support “TPC” Transmit Power Control in the 5 GHz UNII bands and the software and associated drivers to support TPC are built into the device firmware, with no mechanism to disable or turn off TPC. DFS Support In Addition, we attest that this device does not support access, by any party (End User or Professional Installer), to disable DFS. There are no controls or selections in the product firmware that can turn off/disable DFS. Limited Accesses In Addition, we, declare that this device doesn’t have Ad Hoc function on “non-US frequencies” and/or “on DFS frequencies”. In non-associated mode, that software and associated drivers will not initiate any transmission on DFS frequencies. This includes transmissions for beacon, ad-hoc, and peer-to-peer modes. Regulatory Engineering Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Continuing Compliance In Addition, we will ensure that our device under FCC ID: H9PCCHUB1 submitted by means of this application, will be continuously produced in compliance with FCC regulations. In relation to this, we accept all consequences of market surveillance performed by FCC or acting Certification Body as specified in the FCC’s regulations. If you have any questions regarding this authorization, please contact me directly. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Label location

100% TW 20mm 機種: PCT4310-D97(RoHS)_Housing 日期: 20141110 1:1硬幣尺寸對照圖 19mm WJ ” ” ” ” 1:1 Choose “Actual Size” under “Page Sizing and Handling” to get 1:1 actual size. 35mm 130mm

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

Report No.: SA141104C31 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA141104C31 FCC ID: H9PCCHUB1 Test Model: CC5000-10 Received Date: Nov. 04, 2014 Test Date: Mar. 26 ~ Apr. 09, 2015 Issued Date: Apr. 23, 2015 Applicant: Symbol Technologies Inc Address: One Motorola Plaza, Holtsville, New York, 11742, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA141104C31 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result Of Maximum Conducted Power .......................................................................... 6 Report No.: SA141104C31 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA141104C31 Original release Apr. 23, 2015 Report No.: SA141104C31 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Customer Concierge Brand: Symbol Test Model: CC5000-10 Sample Status: Engineering sample Applicant: Symbol Technologies Inc Test Date: Mar. 26 ~ Apr. 09, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date:Apr. 23, 2015 Polly Chien / Specialist Approved by : , Date:Apr. 23, 2015 Ken Liu / Senior Manager Report No.: SA141104C31 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA141104C31 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result Of Maximum Conducted Power WLAN: Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412-2472 22.86 5.40 20 0.133 1 5180-5240 21.04 3.33 20 0.054 1 5260-5320 20.55 2.81 20 0.043 1 5500-5720 17.56 3.36 20 0.025 1 5745-5825 17.57 3.08 20 0.023 1 BT EDR Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2402~2480 -0.73 5.40 20 0.0006 1 CONCLUSION: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.133 + 0.054 = 0.187 Therefore all the maximum calculations of above situations are less than the “1” limit. --- END ---

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 24 Report No. : SA141104C31 Issued Date : Jun. 26, 2015 FCC SAR Test Report Report No. : SA141104C31 Applicant : Symbol Technologies, Inc. Address : One Zebra Plaza, Holtsville, NY 11742 USA Product : Customer Concierge FCC ID : H9PCCHUB1 Brand : Symbol Model No. : CC5000-10 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 865664 D02 v01r01 KDB 248227 D01 v02r01 / KDB 447498 D01 v05r02 / KDB 616217 D04 v01r01 Sample Received Date : Nov. 04, 2014 Date of Testing : Jun. 25, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Rona Chen / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 24 Report No. : SA141104C31 Issued Date : Jun. 26, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ......…

Text truncated - open the document above for the full version.

Report No.: RF141104C31-1 Page No. 1 / 20 Report Format Version: 6.1.1 DFS Test Report Report No.: RF141104C31-1 FCC ID: H9PCCHUB1 Test Model: CC5000-10 Received Date: Nov. 04, 2014 Test Date: Apr. 15, 2015 Issued Date: Apr. 16, 2015 Applicant: Symbol Technologies Inc. Address: One Zebra Plaza, Holtsville, NY 11742 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141104C31-1 Page No. 2 / 20 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 EUT Information .................................................................................................................................... 5 2.1 Operating Frequency Bands and Mod…

Text truncated - open the document above for the full version.