H9P41210000Radio data terminal with 2 included radios

41210000 Terminal Preliminary DIAD IV Te r m i n a l © 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products. Symbol, the Symbol logo, and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com Patents This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562; D436,104. Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 rev. 06/02 P r e l i m i n a r y 1 Quick Reference Introduction The 41210000 Terminal is a durable hand-held or vehicle-mount radio data terminal. You can enter data by using the custom keypad, bar code scanner, or a combination of the two. You can transmit data from the terminal immediately by the radio link to a host computer. The main features of this terminal include: •Ergonomic design with illuminated color LCD display •Windows ® CE Operating System •Intel XScale TM application processor technology •Wireless Personal Area Network (WPAN), Wireless Local Area Network (WLAN) •1-Dimensional scanning capability •Color TFT LCD display •Touch screen •Printing support •IrDA-compliant interface for printing and communications. •Speaker and Microphone •Acoustic Modem and Dialer •Indicator •Power Management •Diagnostics •Application Software Loader •Systems Software Loader •Application Program Interfaces. Preliminary 2 DIAD IV Terminal About This Guide This guide provides instructions for the set up and operation of the terminal. The following topics are included: •Accessories on page 2 •Parts of the Terminal on page 3 •Getting Started on page 3 •Charging the Internal Battery on page 4 •Operating the Terminal on page 4 •Maintaining the Terminal on page 5 •Troubleshooting on page 6 •Regulatory Information on page 8. Accessories The following optional accessories are available from Symbol Technologies: •Belt Attachment •DIAD IV Depot Charger •Stylus •DIAD IV Vehicle Holder. P r e l i m i n a r y 3 Quick Reference Parts of the Terminal Note:The battery status LED lights only when the battery is charging in the DIAD IV Depot Charger. When the ter- minal is not charging, this LED is application depen- dent. Getting Started Before the terminal is used for the first time: 1. Remove the protective film covers from the LCD display and battery charging contacts. 2. Charge the internal battery using the DIAD IV Depot Charg- er. Before using the terminal for the first time, a full charge cycle is recommended. This can take up to six hours. Exit window LCD display Scan keys Stop complet e key Key state key Escape key Delete key Speaker Key state indicator Photo sensor Battery status LED Microphone Space key Backspace key Soft key cycle key P r e l i m i n a r y 4 DIAD IV Terminal Charging the Internal Battery …

Text truncated - open the document above for the full version.

DIAD IV Terminal Licensing, Patent and Regulatory Information © 2003 - 2004 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol and UPS' rights and obligations with relation to the DIAD IV product, including without limitation product liability and license grants, will be in accordance with Purchase Agreements number: 2001 - 11204 - 01, 2001 - 11204 - 02 and 2001 - 11204 - 03, dated February 13, 2003. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com Patents For patent information, go to: www.symbol.com/patents. 72-63596-01 Revision C — June 2004 Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in the countries listed in sections 4.5 of Exhibit 2 of the Agreement and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Antenna's, use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. Radio Modules This device contains approved radio modules. These modules are identified below. • Symbol Compact Flash RLAN (11Mbps DSSS) radio card, Type: LA-4137 • Motorola Triband GSM GPRS G18 module, or Motorola CDMA C18 module • Symbol Bluetooth TM Module, Type: 21-64381. This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. This device contains a Bluetooth qualified module, Bluetooth ID: B01285 or B00813. Country Approvals Regulatory markings are applied to the device signifying the radio (s) are approved for use in the following countries: United States, Canada, Australia, Japan & Europe 1. Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http://www2.symbol.com/doc/. Note 1 : For 2.4GHz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Operation of the device without regulatory approval is illegal. Health and Safety Recommendations Ergonomic Recommendations Caution: Even the best-designed products can be a potential source of injury/illness if used incorrectly. In order to avoid or minimize risk of ergonomic injury, follow the general recommendations below. Consult with your local Health & Safety Manager to ensure that you are meeting your company’s safety programs to prevent employee injury. • Reduce or eliminate repetitive motion. • Maintain a neutral posture and avoid awkward positions. • Reduce or eliminate excessive force. • Keep objects that are used frequently within easy reach. • Perform tasks at correct heights. • Reduce or eliminate vibration. • Reduce or eliminate direct pressure. • Provide adjustable workstations. • Avoid static exertions. • Provide adequate clearance. • Provide a suitable working environment. • Improve work procedures. • Take periodic rest breaks. For Vehicle installations and use 1. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. 2. Position your device within easy reach. Be able to access your device without removing your eyes from the road. 3. Do not take notes or use the device while driving to the point of distracting from driving. Reading or Jotting down text takes attention away from your primary responsibility, driving safely. Cell Phone/Terminal Warnings Effect on Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Safety on Aircraft You are required to switch OFF mobile phones when on board an aircraft as operation may be dangerous and illegal. Pacemakers It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid any possible interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers: • Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. • Should not carry the device in a breast pocket. • Should use the ear furthest from the pacemaker to minimise the potential for interference. • If you have any reason to suspect that interference is taking place, turn OFF your device. Radio Frequency Interference Requirements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference…

Text truncated - open the document above for the full version.

Regulatory Engineering MB/TCB/Application Letter/H9P41210000 16 th November 2004 BABT 34 Molesey Road WALTON-ON-THAMES Surrey KT12 4RQ Subject: Request for Original Equipment Grant (H9P41210000) This certification request is for the Symbol Mobile Computer with FCC ID: H9P41210000. Symbol Technologies has integrated two approved radio transmitters into a new terminal, these radios are identified below: Approved Radios Symbol, LA-4137, 802.11b Compact Flash Radio FCC ID: H9PLA4137 Symbol, 21-24381, Bluetooth Radio Module FCC ID: H9P2164381 No electrical or mechanical modifications were made to these transmitters from the time of the original FCC submission. Intended Use The Data Terminal is designed to be used in the hand and can be clipped onto the users belt using a Symbol supplied Belt Clip. SAR A SAR Report is submitted to support a ‘portable ’ FCC application. The worst case RF Exposure SAR test results data (0.630 W/kg), taken in direct contact (0 cm), is under the current 1.6 W/kg limit set in 2.1093 for portable devices. Collocation The WLAN (802.11b) and WPAN (Bluetooth) radios are collocated but they DO NOT simultaneously transmit. Regulatory Engineering • Web Site: http://ww.symbol.com Antennas New antennas were used with each transmitter as follows: Radio Antenna P/N Type Gain (Av) WLAN radio 10-674160-02 Monopole -4dBi WPAN module 10-674160-02 Monopole -4dBi Symbol respectfully request that the Antenna Type and Gain be listed in the comments section of the Grant Exhibits The following Exhibits are electronically submitted as attachments. Exhibit Description Confidential 1 ID Label/Location Info 3 External Photos 4 Block Diagram X 5 Schematics Antenna Information X 6 Technical Report - FCC Report/01 7 Test Setup Photographs 8 User Manual - Regulatory Information Sheet 9 Internal Photos 10 Parts List X 11 RF Exposure - SAR Report 12 Operating Description X 13 Cover Letters - Agent letter 14 Confidentiality Letter Respectfully, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected] Regulatory Engineering • Web Site: http://ww.symbol.com

Regulatory Engineering MB/TCB/Confidentiality/H9P41210000 16 th November 2004 BABT 34 Molesey Road WALTON-ON-THAMES Surrey KT12 4RQ Confidentiality Request Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Symbol Technologies Inc. hereby requests confidential treatment of information accompanying as outlined below: • Schematics • Block Diagrams • Parts List (Bill of Materials) • Theory of Operation • Antenna Specifications The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected] Regulatory Engineering • Web Site: http://ww.symbol.com

FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Front View 2004 Not to be reproduced without the permission of TÜV Product Service Ltd Page 1 of 6 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Rear View 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 2 of 6 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Left Hand Side View 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 3 of 6 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Right Hand Side View 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 4 of 6 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Label View 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 5 of 6 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 6 of 6 MANUFACTURERS LABEL DIAGRAMS Label View – 41210000

FCC ID: H9P41210000 IC: 1549D-41210000 SYMBOL TECHNOLOGIES INC 41210000 DATA TERMINAL ID Label / Location

FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 1 2004 Not to be reproduced without the permission of TÜV Product Service Ltd Page 1 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 2 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 2 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 3 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 3 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 4 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 4 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 5 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 5 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 6 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 6 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 7 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 7 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 8 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 8 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 9 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 9 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 10 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 10 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 11 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 11 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 12 - Antenna 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 12 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 13 - Antenna 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 13 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 14 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 14 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 15 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 15 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 16 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 16 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 17 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 17 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL PHOTOGRAPHS OF EQUIPMENT Internal View 18 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 18 of 19 FCC ID: H9P41210000 SYMBOL TECHNOLOGIES INC 41210000 HAND HELD DATA TERMINAL 2004 Not to be reproduced without the Permission of TÜV Product Service Ltd Page 19 of 19 PHOTOGRAPHS OF EQUIPMENT Internal View 19

REPORT ON The Specific Absorption Rate Assessment of The Symbol 41210000 Hand Held Data Terminal Report Number: WS612329 – 002 Issue 1.00November 2004 TUV Product Service Ltd. Segensworth Road, Titchfield Fareham, Hampshire, United Kingdom, PO15 5RH Tel: +44(0)1329 443300, Fax: +44(0)1329 443331 www.tuvps.co.uk Report Number WS612329 – 002 Issue 1.00Page 1 of 46 REPORT ON:The Specific Absorption Rate Assessment of the Symbol 41210000 Hand held Data Terminal Report No: WS612329 – 002 Issue 1.00 FCC ID:H9P41210000 PREPARED FOR:Symbol Technologies One Symbol Plaza Holtsville NY 11742-1300 New York United States of America ATTESTATION:The wireless portable device described within this report has been shown to be capable of compliance for localised specific absorption rate (SAR) for FCC standard Supplement C (Edition 01-01) to OET Bulletin 65 (Edition 97-01) and RSS-102 Issue 1 (Provisional) September 25, 1999 of 1.6 W/kg. The measurements shown in this report were made in accordance with the procedures specified in Supplement C (Edition 01-01) to OET Bulletin 65 (Edition 97-01), RSS-102 Issue 1 (Provisional) September 25. All reported testing was carried out on a sample of equipment to demonstrate compliance with the above standards. The sample tested was found to comply with the requirements in the applied rules. A. Miller Senior SAR Test Engineer APPROVED BY: M J Hardy Deputy Wireless Group Leader DATED:19 th November 2004 DISTRIBUTION:Symbol Technologies IncCopy No: 1 Symbol Technologies Inc (CD ROM).Copy No(s): 2 BABT Copy No.: 3 Copy No.: Note: The test results reported herein relate only to the item tested as identified above and on the Status Page. FCC ID: H9P41210000 Report Number WS612329 – 002 Issue 1.00Page 2 of 46 CONTENTS EXECUTIVE SUMMARY3 1.1Status4 1.2Declaration of build5 1.3Summary6 1.4Test Result Summary7 TEST DETAILS9 2.1Test Equipment10 2.2Test Software10 2.3Dielectric Properties of Simulant Liquids11 2.4Test Conditions12 2.5Measurement Uncertainty13 2.6SAR Measuring System14 Probe and Amplifier Specification Probe Calibration SAR Measurement Procedure 2.7OET65(c) Flat Phantom Test Position – Graphical Representation32 2.8SAR Distributions (Area Scans – 2D)35 2.9Test Positional Photographs40 2.10Record Photographs41 2.12Copyright Statement46 FCC ID: H9P41210000 Report Number WS612329 – 002 Issue 1.00Page 3 of 46 EXECUTIVE SUMMARY The Specific Absorption Rate Assessment of the Symbol 41210000 Hand Held Data Terminal PROJECT MANAGER: M. Glasspool FCC ID: H9P41210000 Report Number WS612329 – 002 Issue 1.00Page 4 of 46 1.1STATUS MANUFACTURING DESCRIPTIONHandheld Data Terminal STATUS OF TESTSpecific Absorption Rate Testing APPLICANTSymbol Technologies Inc MANUFACTURERSymbol Technologies Inc TYPE41210000 PART NUMBER412100000 SERIAL NUMBER SAMP-0007 (Dot Spare) HARDWARE VERSIONRev1 (to be released as RevA) RADIO LANSymbol Compact Flash RLAN Radio TYPELA-4137 POWER100mW RADIO BLUETOOTHSymbol Bluetooth Module TYPE21-64381 POWER1mW restricted BATTERY MANUFACTURERSymbol Technologies Inc PART NUMBER21-59510-02 (Li Ion 7.2v) TEST SPECIFICATIONS: US Federal Government, Code of Federal Regulations, Title 47 Telecommunication, Chapter I Federal Communications Commission, part 2, section 1093. Federal Communications Commission (FCC) OET Bulletin 65c, Edition 01-01, Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields – Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions RSS-102 Issue 1 (Provisional) September 25, 1999: Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada’s Safety Code 6 for Exposure of Humans to radio Frequency Fields. Australian Communications Authority – Radio communications (Electromagnetic Radiation – Human Exposure) Standard 2003. REFERENCES: IEEE 1528 – 2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques BABT REGISTRATION NUMBER:WS612329 RECEIPT OF TEST SAMPLES:30 th September 2004 START OF TEST:13 th October 2004 FINISH OF TEST:15 th October 2004 FCC ID: H9P41210000 Report Number WS612329 – 002 Issue 1.00Page 5 of 46 1.2DECLARATION OF BUILD STATUS MAIN EUT MANUFACTURING DESCRIPTION Hand Held Terminal MANUFACTURER Symbol Technologies Inc TYPE 41210000 PART NUMBER 412100000 SERIAL NUMBER SAMP-0001 (FCC2) & SAMP-0007 (Dot Spare) HARDWARE VERSION Rev 1 (to be released as Rev A) FCC ID H9P41210000 INDUSTRY CANADA ID 1549D-41210000 TECHNICAL DESCRIPTION The unit supplied for testing was a 41210000 hand held data terminal, which offers 2.4GHz 802.11b Wireless LAN and Bluetooth connectivity. The terminal utilizes the approved LA-4137 Symbol Compact Flash 802.11b RLAN radio card and the 21-64831 Symbol Bluetooth module. BATTERY/POWER SUPPLY CHEMISTRY Li Ion PART NUMBER 21-59510-02 VOLTAGE 7.2v MODULES MANUFACTURING DESCRIPTION RLAN ModuleBluetooth Marlin Module MANUFACTURER Symbol Technologies IncSymbol Technologies Inc TYPE LA413721-64381 TRANSMITTER OPERATING BAND 2400-2483.5 MHz2400-2483.5 MHz RECEIVER OPERATING BAND 2400-2483.5 MHz2400-2483.5 MHz ITU DESIGNATION OF EMISSION 11M0F1D1M00F1D POWER 100mW 100mW (restricted in this terminal integration to 1 mW) DHSS/FHSS/COMBINED OR OTHER DSSSFHSS FCC ID H9PLA4137H9P2164381 MANUFACTURING DESCRIPTION RLAN ModuleBluetooth Marlin Module Signature Date 10 th September 2004 D of B S Serial No OS612329-02 FCC ID: H9P41210000 Report Number WS612329 – 002 Issue 1.00Page 6 of 46 1.3SUMMARY This report covers the depopulated version of 4121GPRS version of the hand held data terminal. This report covers the 41210000 hand held data terminal supplied for testing, which offers 2.4GHz 802.11b Wireless LAN and Bluetooth connectivity only. SAR testing was first performed with the device set the appropriate test mode, against a flat phanto…

Text truncated - open the document above for the full version.

REPORT ON Limited FCC CFR 47: Part 15 C Testing in support of an Application for Grant of Equipment Authorisation of a Symbol 41210000 Hand Held Data Terminal FCC ID: H9P41210000 Report No OR612329/05 Issue 1 October 2004 BABT, Segensworth Road, Fareham, Hampshire, PO15 5RH, United Kingdom Tel: +44 (0)1329 443300 Website: www.tuvps.co.uk Report No OR612329/05 Issue 1Page 1 of 53 REPORT ONLimited FCC CFR 47: Part 15 C Testing in support of an Application for Grant of Equipment Authorisation of a Symbol 41210000 Hand Held Data Terminal FCC ID: H9P41210000 Report No OR612329/05 Issue 1 October 2004 PREPARED FORSymbol Technologies Inc One Symbol Plaza Holtsville NY 11742-1300 New York United States of America PREPARED BY J Plummer Technical Author APPROVED BY C Gould Chief Engineer, EMC Group DATED 12-10-04 DISTRIBUTIONSymbolCopy 1 BABTCopy 2 Copy No ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47: Part 15 C. The sample tested was found to comply with the requirements defined in the applied rules. Test Engineers; A GuyG Lawler FCC ID: H9P41210000 Report No OR612329/05 Issue 1Page 2 of 53 CONTENTS SectionPage No 1REPORT SUMMARY 1.1Status..................................................................................................................................4 1.2Introduction .........................................................................................................................5 1.3Product information............................................................................................................6 1.4Brief Summary of Results (and Observations) ...................................................................8 1.5Opinions and Interpretations ..............................................................................................9 1.6Test Conditions (Configuration)..........................................................................................9 1.7Deviations from the Standard.............................................................................................9 1.8 Modification Record............................................................................................................9 1.9 Alternative Test Site ...........................................................................................................9 2TEST DETAILS – RLAN MODE 2.1Measurement At The Band Edge .......................................................................................11 2.2 Conducted Emissions On Power Lines..............................................................................16 2.3Maximum Peak Output Power............................................................................................20 2.4Spurious Radiated Emissions ............................................................................................22 2TEST DETAILS – BLUETOOTH MODE 2.5Measurement At The Band Edge .......................................................................................29 2.6 Conducted Emissions On Power Lines..............................................................................34 2.7Maximum Peak Output Power............................................................................................38…

Text truncated - open the document above for the full version.