H9PCS4070Bluetooth Dongle

CS4070 Scanner Quick Reference Guide 2CS4070 Scanner No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Symbol Technologies. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Symbol Technologies grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Symbol Technologies. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Symbol Technologies. The user agrees to maintain Symbol Technologies’ copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Symbol Technologies reserves the right to make changes to any software or product to improve reliability, function, or design. Symbol Technologies does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol Technologies products. Symbol ® is a registered trademark, and The Enterprise Mobility Company is a trademark of Symbol Technologies, Inc. All other trademarks and service marks are proprietary to their respective owners. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. Symbol Technologies, Inc. One Motorola Plaza Holtsville, New York 11742-1300 http://www.motorolasolutions.com Quick Reference Guide3 Introduction The CS4070 Scanner captures and stores bar codes for a variety of uses, and transmits bar code data to a host via USB connection or Bluetooth. This document provides basic instructions for setting up, programming, and using CS4070 scanners. The scanner is available in the following configurations: • CS4070SR - Standard range, cordless Bluetooth • CS4070HC - Healthcare, cordless Bluetooth Each scanner includes a micro USB host cable. Cradles are also available for mounting, charging, and host connection. Scanner Window Scan/Add Key LED Bluetooth Key / LED Delete Key Battery Level LEDs Battery Level Key Micro USB Port 4CS4070 Scanner Charging Before using the CS4070 for the first time, charge the battery using the micro USB cable or a cradle until all four green charging LEDs light. Charge time is approximately three hours for a fully discharged battery. Charging via USB Host Cable 1. Insert the micro USB connector on the cable in the interface port on the scanner. 2. Connect the other end of the host cable to a USB port on the host PC, or to a USB power adapter plugged into an AC outlet. Quick Reference Guide5 Charging via Charging Cradle 1. Connect the single-slot or 8-slot charging cradle to power. 2. Insert the CS4070 into a device slot to begin charging. The CS4070 begins charging. The charge status LEDs light to indicate progress. See User Indications on page 12 for charging indications. Refer to the CS4070 Scanner Product Reference Guide for information on accessories. 6CS4070 Scanner Charging Spare Batteries 1. Connect the single-slot cradle or 8-slot spare battery charger to power. 2. Insert the battery into a spare battery slot with the charging contacts facing down, contacting the charging pins in the cradle. The charge LED on the cradle lights to show the charge status. Connecting to a Host Batch Connection The micro USB cable enables communication between the CS4070 and a PC, and charges the battery in the CS4070. See Charging via USB Host Cable on page 4 for connection instructions. Bluetooth Connection Pairing The CS4070 supports Serial Port Profile (SPP) and Human Interface Device (HID) protocols. Note To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host. Quick Reference Guide7 To pair to a Bluetooth-enabled host: 1. Press the scan button (+) to wake the scanner. 2. Press and hold the Bluetooth button for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host. 3. On the host, launch the Bluetooth pairing application and place the application into discover Bluetooth device mode. Refer to the CS4070 Scanner Product Reference Guide for pairing examples. 4. Select the CS4070 from the discovered device list. The Bluetooth application may prompt you to scan a PIN it generated, or for you to create and then scan the PIN. 5. Scan PIN Entry Bar Codes on page 8 that correspond to the PIN, then scan Enter. The Bluetooth button blinks slowly to indicate that the scanner paired with the host. Unpairing To unpair the scanner and host, press the Bluetooth button. Upon unpairing, the Bluetooth button stops blinking. Note Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable …

Text truncated - open the document above for the full version.

Regulatory Engineering Symbol Technologies, Inc. July 14, 2014 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Attestations and Requests, FCC ID: H9PCS4070 To the Commission: Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: EXHIBIT (12) Operational Description EXHIBIT (4) Block Diagram EXHIBIT (5) Schematic Diagrams EXHIBIT (5) Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Short-Term Confidentiality Pursuant to Section 0.459 of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act, Symbol Technologies Hereby requests short term confidential treatment of information accompanying this Application for Equipment Authorization with FCC ID: H9PCS4070 for Exhibits as outlined below: 1. Internal Photographs 2. External Photographs 3. Test Setup Photographs 4. User’s Manual The above materials contain images, trade secrets, and proprietary information not customarily released to the public prior to offering for sale. The public disclosure of these matters might be harmful to Symbol Technologies and provide unjustified benefits to its competitors. Regulatory Engineering Symbol Technologies, Inc. No 3 rd Party Access We, Symbol Technologies, Inc., hereby declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. The function of this end product may not be changed by the end user. Anti-Drug Declaration We, the undersigned, certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). Declaration of Part 15 Subpart B Compliance We, Symbol Technologies, Inc., as the grantee of this device would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Declaration of Label Location We, Symbol Technologies, Inc., state that there is no other space for putting the label on our device, except for the space of the battery compartment of this device. The label will be put under the battery compartment and it is visible to the users as they purchase the product and install the battery. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 [email protected]

Regulatory Engineering Symbol Technologies, Inc. Symbol Technologies, Inc. One Motorola Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.motorolasolution.com June 30, 2014 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Power of Attorney Letter FCC ID: H9PCS4070 We, the undersigned, Symbol Technologies, Inc., hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan and Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd. Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all matters relating to all processes required by the FCC for the approval of the CS4070 and any communication needed with the FCC. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 [email protected]

Report No.: 140505C12 1 of 11 CONSTRUCTION PHOTOS OF EUT

NOTE: ITEMS OUTLINED IN GRAY BE PRINTED ON THE LABEL AT A LATER DATE AS APPROVALS ARE RECEIVED Symbol Technologies, Inc. Holtsville, N.Y. 11742 ® Symbol Technologies, Inc. Holtsville, N.Y. 11742 MODEL NO.: PART NAME: A/W NO.: SCALE: UNIT : SHEET OF DRAWN:REVIEWED: APPROVED: REVDESCRIPTIONSIGN DATE 1 : 1 mm 1 1 1 : 1 mm 1 1 MVDG00 Benny Chen 07/07/2014 AD162 SPEC LBL 140.00601.0031 MVDG00 Vicki Jan 07/07/2014 40 mm 32 mm 35 mm 25.8 mm MODEL: CS4070 P/N: XXXXXXXXXXXXX S/N: XXXXXXXXXXXXXX MFD:XXXXXXX MADE IN CHINA XXXX 5V 0.5 A 10 CNC: XXXXXXXXXXXXX ANATEL: AAAA-YY-BBB IC: 1549D-CS4070 CMIIT ID: XXXXYYZZZZ R AAA-000000 KCC-XXX-MIN-XXXXXXXXXXX CCXXxxYYyyyZzW FCC ID: H9PCS4070 CAN ICES-3 (*) /NMB-3 (*) 條碼掃描器 2D BAR CODE Self Declaration – Conforming to IS 13252(Part 1):2010, R-XXXXXXXX E145483 I. T. E. R32626 Printed by Wistron’s Factory PLANT CODE REQUIRED 6pt minimum required 1. MATERIAL: WHITE POLYESTER (T=0.05mm)+可打印霧P 2. ADHESIVE: GRID ADHESIVE (壓花膠) 3. COLOR: BACKGROUND ------WHITE TEXT ------ BLACK 4. PRINT TOLERANCE OF DIMENSION: +0mm/-0.2mm 5.THE MATERIAL MUSE BE APPROVED BY UL, CSA. 0560 KS E0420

FCC ID: H9PCS4070 IC: 1549D-CS4070 Label Location Battery Compartment

Report No.: 140505C12 2 of 11 Report No.: 140505C12 3 of 11 Report No.: 140505C12 4 of 11 Report No.: 140505C12 5 of 11 Report No.: 140505C12 6 of 11 Report No.: 140505C12 7 of 11 Report No.: 140505C12 8 of 11 Report No.: 140505C12 9 of 11 Report No.: 140505C12 10 of 11 Report No.: 140505C12 11 of 11

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 21 Report No. : SA140505C12 Issued Date : Jul. 08, 2014 FCC SAR Test Report Report No. : SA140505C12 Applicant : Symbol Technologies, Inc. Address : One Motorola Plaza, Holtsville, NY 11742 USA Product : Wireless Laser Barcode Scanner FCC ID : H9PCS4070 Brand : Symbol Model No. : CS4070 Standards : FCC 47 CFR PART 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 447498 D01 v05r02 Sample Received Date : May 05, 2014 Date of Testing : Jun. 13, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 21 Report No. : SA140505C12 Issued Date : Jul. 08, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ..............................................................................…

Text truncated - open the document above for the full version.

Report No.: RF140505C12 1 of 62 Report Format Version 5.2.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF140505C12 MODEL NO.: CS4070 FCC ID: H9PCS4070 RECEIVED: May 05, 2014 TESTED: May 08, 2014 ~ Jun. 16, 2014 ISSUED: Jul. 01, 2014 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Motorola Plaza, Holtsville, NY 11742 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140505C12 2 of 62 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..................................................................................................................................5 2. SUMMARY OF TEST RESULTS .........................................................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..................................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES ..............................................................................................8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................9 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 13 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ............................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 16 4.1.5 TEST SETUP ............................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 18 4.1.7 TEST RESULTS........................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 37 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 37 4.2.2 TEST INSTRUMENTS ................................................................................................. 37 4.2.3 TEST PROCEDURES ................................................................................................. 38 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................... 38 4.2.5 TEST SETUP ............................................................................................................... 39 4.2.6 EUT OPERATING CONDITIONS ................................................................................ 39 4.2.7 TEST RESULTS........................................................................................................... 40 4.3 NUMBER OF HOPPING FREQUENCY USED ........................................................................ 44 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................. 44 4.3.2 TEST SETUP ............................................................................................................... 44 4.3.3 TEST INSTRUMENTS ................................................................................................. 44 4.3.4 TEST PROCEDURE ............................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST MODE A 2 MODE B 3 RADIATED EMISSION TEST MODE A 4 MODE B

FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130505C12 <Photographs of EUT> <Antenna Location> The separation distance for antenna to edge: Antenna To Top Side (mm) To Bottom Side (mm) To Left Side (mm) To Right Side (mm) BT 12.47 55.7 1.01 30.49 Bottom Side Top Side Left Side Right Side <EUT Rear View> BT Antenna FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130505C12 <Photographs of SAR Setup> Front Face of EUT with 0 cm Gap Rear Face of EUT with 0 cm Gap Left Side of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Top Side of EUT with 0 cm Gap Bottom Side of EUT with 0 cm Gap