H9PMC7506EDA (Enterprise Digital Assistant)

Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products. Warranty For the complete Motorola hardware product warranty statement, go to: http:// www.symbol.com/warranty. Patents This product is covered by one or more patents. For patent information go to: http://www.symbol.com/patents. Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at: http://www.symbol.com/ contactsupport. For the latest version of this guide go to: http://www.symbol.com/manuals. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.symbol.com MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2008 72-103080-01 Revision 1 — February 2008 Regulatory Guide MC75 Windows Mobile ® 6 Regulatory Information This device is approved under the Symbol Technologies brand; Symbol Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. (“Motorola”). All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol equipment, not expressly approved by Symbol, could void the user's authority to operate the equipment. Declared maximum operating temperature: 50°C. This guide is available in local languages, translations can be downloaded from the following website:http://www.symbol.com/support/. UL Listed Products with GPS Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning System (GPS) hardware, operating software or other aspects of this product. UL has only tested for fire, shock or casualties as outlined in UL’s Standard(s) for Safety for Information Technology Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR ERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS PRODUCT. Bluetooth ® Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://www.bluetooth.org/tpg/ listings.cfm. Wireless Devices Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are approved for use in the following countries: United States, Canada, Japan, S. Korea, Australia, and Europe 1 . Please refer to the Motorola / Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http:// www2.symbol.com/doc/. Note 1: Europe includes Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation – FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations •Reduce or eliminate repetitive motion •Maintain a neutral postures •Reduce or eliminate excessive force •Keep objects that are used frequently within easy reach •Perform tasks at correct heights •Reduce or eliminate vibration •Reduce or eliminate direct pressure •Provide adjustable workstations •Provide adequate clearance •Provide a suitable working environment •Improve work procedures CAUTIONOnly use Motorola approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. CAUTIONIn order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury. •Alternate hands whenever possible when performing a repetitive task. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in t…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT MC7506 HSDPA (Numeric Keypad) 970124L03 Page 2 MC7506 HSDPA (Qwerty Keypad) 970124L03 Page 3

MODEL NO.: PART NAME: A/W NO.: SCALE: UNIT : SHEET OF DRAWN:REVIEWED: APPROVED: REVDESCRIPTIONSIGN DATE 1 : 1 mm 1 1 1 : 1 mm 1 1 VT158 40.17E10.021 LBL REGULATORY_MC7506 for HSDPA, WAN ONLY M0VG00 Benny Chen 12/27/2007 1. MATERIAL: 0.127mm Velvet Lexan + 3M467 2. COLOR: BACKGROUND----ACS-M098 (BEYOND TWILIGHT) LETTERS-----------WHITE 3. ADHESIVE: SPEC REFER TO ES-811-R06, SONY 303 OR TOYO DF2700MR OR EQUIV 4. FINISH: PRINT FRONT SIDE 5. PRINT TOLERANCE OF DIMENSION: +0.3mm/-0.3mm 6. PRINTER TYPE: THERMAL TRANSFER LABEL PRINTER (WEBER 80 OR FARGO PRODIGY), SPEC REFER TO ED-715-F09 7. FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 46.2 mm 24.5 mm SEE REGULATORY GUIDE FOR PATENT INFORMATION ICES/NMB-003 CLASS B FCC ID: H9PMC7506 IC: 1549D-MC7506 E145483 LISTED I. T. E. SK1-MC7506 N410 MODEL NO.: PART NAME: A/W NO.: SCALE: UNIT : SHEET OF DRAWN:REVIEWED: APPROVED: REVDESCRIPTIONSIGN DATE 1 : 1 mm 1 1 1 : 1 mm 1 1 VT158 40.17E11.001 M0VG00 Benny Chen 12/26/2007 1. MATERIAL: POLYESTER,THICKNESS= 0.075MM 2. COLOR: BACKGROUND----WHITE LETTERS-----------BLACK 3. ADHESIVE: SPEC REFER TO ES-811-R06, SONY 303 OR TOYO DF2700MR OR EQUIV 4. FINISH: PRINT FRONT SIDE 5. PRINT TOLERANCE OF DIMENSION: +0.3mm/-0.3mm 6. PRINTER TYPE: THERMAL TRANSFER LABEL PRINTER (WEBER 80 OR FARGO PRODIGY), SPEC REFER TO ED-715-F09 7. FACTORY INDENTIFICATION OF CSA MUST BE PRINTED SPEC LBL for HSDPA HO LTSVILLE N.Y. 11742 (S) S/N: XXXXXXXXXXXXXXX MFD: 21DEC07 IMEI: XXXXXXXXXXXXXXX Complies with 21CFR1040. 10 and1040. 11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001, and EN60825-1:1994+ A1:2002 +A2:2001, IEC60825-1:1993+A1:1997+A2:2001 25.6 mm I/P: 5,4V 3A MADE IN PHILIPPINES 33.6 mm R0.8mm X3 P/N: MC7506-XXXXXXXXXXXX Model: MC7506

The Enterprise Mobility Company SYMBOL TECHNOLOGIES, INC. One Symbol Plaza, Holtsville, NY 11742-1300 • 516-738-2400 Website: http://www.symbol.com Symbol Technologies, Inc., a wholly owned subsidiary of Motorola, Inc. MC7596– FCC ID Label and Location EXTERNAL HOUSING BATTERY COMPARTMENT

Page 4 Mobile ANT. BT ANT. 13.5cm Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 MC7506 HSDPA (Numeric Keypad) Page 24 MC7506 HSDPA (Qwerty Keypad) Page 25 Page 26 MC7506 HSDPA (Numeric Keypad) Page 27 Page 28 MC7506 HSDPA (Qwerty Keypad) Page 29 Page 30

Report no.: SA970124L03-1 1 Report Format Version 2.1.0 SAR TEST REPORT (Mobile Phone) REPORT NO.: SA970124L03-1 MODEL NO.: MC7506 RECEIVED: Jan. 24, 2008 TESTED: Mar. 09 ~ Mar. 12, 2008 ISSUED: Mar. 19, 2008 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Symbol Plaza, Holtsville, NY 11742-1300 USA ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 62 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report no.: SA970124L03-1 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1. CERTIFICATION.......................................................................................................3 2. GENERAL INFORMATION .......................................................................................4 2.1 GENERAL DESCRIPTION OF EUT .........................................................................4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS ..........................................6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM.................................................9 2.4 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION..............12 3. DESCRIPTION OF SUPPORT UNITS ...................................................................16 4. DESCRIPTION OF TEST POSITION .....................................................................17 4.1 DESCRIPTION OF TEST POSITION .....................................................................17 4.2.1 TOUCH/CHEEK TEST POSITION .........................................................................18 4.2.2 TILT TEST POSITION ............................................................................................19 4.2.3 BODY-WORN CONFIGURATION ..........................................................................19 4.2 DESCRIPTION OF TEST MODE ...........................................................................20 4.3 SUMMARY OF TEST RESULTS ............................................................................22 5. TEST RESULTS .....................................................................................................25 5.1 TEST PROCEDURES ............................................................................................25 5.2 MEASURED SAR RESULTS..................................................................................27 5.3 SAR LIMITS............................................................................................................41 5.4 RECIPES FOR TISSUE SIMULATING LIQUIDS ...................................................42 5.5 TEST EQUIPMENT FOR TISSUE PROPERTY .....................................................49 6. SYSTEM VALIDATION ...........................................................................................50 6.1 TEST EQUIPMENT ................................................................................................50 6.2 TEST PROCEDURE...............................................................................................51 6.3 VALIDATION RESULTS..........................................................................................53 6.4 SYSTEM VALIDATION UNCERTAINTIES .............................................................54 7. MEASUREMENT SAR PROCEDURE UNCERTAINTIES ......................................55 7.1 PROBE CALIBRATION UNCERTAINTY ................................................................55 7.2 ISOTROPY UNCERTAINTY ...................................................................................56 7.3 BOUNDARY EFFECT UNCERTAINTY ..................................................................56 7.4 PROBE LINEARITY UNCERTAINTY .....................................................................57 7.5 READOUT ELECTRONICS UNCERTAINTY .........................................................57 7.6 RESPONSE TIME UNCERTAINTY ........................................................................57 7.7 INTEGRATION TIME UNCERTAINTY....................................................................58 7.8 PROBE POSITIONER MECHANICAL TOLERANCE.............................................59 7.9 PROBE POSITIONING...........................................................................................59 7.10 PHANTOM UNCERTAINTY....................................................................................60 7.11 DASY4 UNCERTAINTY BUDGET ..........................................................................61 8. INFORMATION ON THE TESTING LABORATORIES ...........................................62 APPENDIX A: TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION APPENDIX E: TEST CONFIGURATIONS Report no.: SA970124L03-1 3 Report Format Version 2.1.0 1. CERTIFICATION PRODUCT: EDA (Enterprise Digital Assistant) MODEL: MC7506 BRAND: Symbol APPLICANT: Symbol Technologies, Inc. TESTED: Mar. 09 ~ Mar. 12, 2008 TEST SAMPLE: PROTOTYPE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 IEEE 1528-2003 The above equipment (model: MC7506) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Mar. 19, 2008 Andrea Hsia / Specialist TE…

Text truncated - open the document above for the full version.

Report No.: SA970124L03 1 Report Format Version 2.1.0 SAR TEST REPORT (BLUETOOTH) REPORT NO.: SA970124L03 MODEL NO.: MC7506 RECEIVED: Jan. 24, 2008 TESTED: Mar. 13, 2008 ISSUED: Mar. 19, 2008 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Symbol Plaza, Holtsville, NY 11742-1300 USA ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: 47 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 36 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: SA970124L03 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1. CERTIFICATION ...................................................................................................3 2. GENERAL INFORMATION....................................................................................4 2.1 GENERAL DESCRIPTION OF EUT ......................................................................4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM .............................................7 2.4 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION...........10 3. DESCRIPTION OF SUPPORT UNITS ................................................................13 4. DESCRIPTION OF TEST MODES AND CONFIGURATIONS ............................14 4.1. DESCRIPTION OF TEST MODE ........................................................................14 4.2. SUMMARY OF TEST RESULTS .........................................................................14 5. TEST RESULTS ..................................................................................................15 5.1 TEST PROCEDURES .........................................................................................15 5.2 MEASURED SAR RESULTS...............................................................................17 5.3 SAR LIMITS.........................................................................................................19 5.4 RECIPES FOR TISSUE SIMULATING LIQUIDS ................................................20 5.5 TEST EQUIPMENT FOR TISSUE PROPERTY ..................................................23 6. SYSTEM VALIDATION ........................................................................................24 6.1 TEST EQUIPMENT .............................................................................................24 6.2 TEST PROCEDURE............................................................................................25 6.3 VALIDATION RESULTS ......................................................................................27 6.4 SYSTEM VALIDATION UNCERTAINTIES ..........................................................28 7. MEASUREMENT SAR PROCEDURE UNCERTAINTIES...................................29 7.1. PROBE CALIBRATION UNCERTAINTY.............................................................29 7.2. ISOTROPY UNCERTAINTY ...............................................................................30 7.3. BOUNDARY EFFECT UNCERTAINTY...............................................................30 7.4. PROBE LINEARITY UNCERTAINTY ..................................................................31 7.5. READOUT ELECTRONICS UNCERTAINTY ......................................................31 7.6. RESPONSE TIME UNCERTAINTY ....................................................................31 7.7. INTEGRATION TIME UNCERTAINTY ................................................................32 7.8. PROBE POSITIONER MECHANICAL TOLERANCE .........................................33 7.9. PROBE POSITIONING .......................................................................................33 7.10. PHANTOM UNCERTAINTY ................................................................................34 7.11. DASY4 UNCERTAINTY BUDGET ......................................................................35 8. INFORMATION ON THE TESTING LABORATORIES ........................................36 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA970124L03 3 Report Format Version 2.1.0 1. CERTIFICATION PRODUCT: EDA (Enterprise Digital Assistant) MODEL: MC7506 BRAND: Symbol APPLICANT: Symbol Technologies, Inc. TESTED : Mar. 13, 2008 TEST SAMPLE: PROTOTYPE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 IEEE 1528-2003 The above equipment (model: MC7506) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Mar. 19, 2008 Andrea Hsia / Specialist TECHNICAL ACCEPTANCE : , DATE:Mar. 19, 2008 Responsible for RF James Fan / Engineer APPROVED BY : , DATE:Mar. 19, 2008 Gary Chang / Assistant Manager Report No.: SA970124L03 4 Report Format Version 2.1.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT PRODUCT EDA (Enterprise Digital Assistant) MODEL NO. MC7506 FCC ID H9PMC7506 POWER SUPPLY 3.7Vdc from rechargeable lithium battery 5.4Vdc from power adapter CLASSIFICATION Portable device, production unit MODULATION TYPE Bluetooth: GFSK,π/4-DQPSK, 8DPSK GPS: C/A code RADIO TECHNOLOGY FHSS TRANSFER RATE Bluetooth: 1/2/3Mbps GPS: 50 bps FREQUENC…

Text truncated - open the document above for the full version.

Report No.: RF970124L03-1 1 Report Format Version 2.1.0 FCC TEST REPORT (PART 22) REPORT NO.: RF970124L03-1 MODEL NO.: MC7506 RECEIVED: Jan. 24, 2008 TESTED: Feb. 21 ~ Mar. 12, 2008 ISSUED: Mar. 13, 2008 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Symbol Plaza, Holtsville, NY 11742-1300, U.S.A. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF970124L03-1 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1 CERTIFICATION ........................................................................................................4 2 SUMMARY OF TEST RESULTS ................................................................................5 2.1 MEASUREMENT UNCERTAINTY .............................................................................5 3 GENERAL INFORMATION.........................................................................................6 3.1 GENERAL DESCRIPTION OF EUT...........................................................................6 3.2 DESCRIPTION OF TEST MODES.............................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ...........................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ..........................................14 3.4 DESCRIPTION OF SUPPORT UNITS .....................................................................14 4 TEST TYPES AND RESULTS ..................................................................................15 4.1 OUTPUT POWER MEASUREMENT .......................................................................15 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT.....................................................15 4.1.2 TEST INSTRUMENTS .............................................................................................16 4.1.3 TEST PROCEDURES ..............................................................................................17 4.1.4 TEST SETUP ...........................................................................................................18 4.1.5 EUT OPERATING CONDITIONS .............................................................................18 4.1.6 TEST RESULTS .......................................................................................................19 4.2 FREQUENCY STABILITY MEASUREMENT ...........................................................26 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT ........................................26 4.2.2 TEST INSTRUMENTS .............................................................................................26 4.2.3 TEST PROCEDURE ................................................................................................27 4.2.4 TEST SETUP ...........................................................................................................27 4.2.5 TEST RESULTS .......................................................................................................28 4.3 OCCUPIED BANDWIDTH MEASUREMENT...........................................................30 4.3.1 LIMITS OF OCCUPIED BANDWIDTH MEASUREMENT ........................................30 4.3.2 TEST INSTRUMENTS .............................................................................................30 4.3.3 TEST SETUP ...........................................................................................................30 4.3.4 TEST PROCEDURES ..............................................................................................31 4.3.5 EUT OPERATING CONDITION ...............................................................................31 4.3.6 TEST RESULTS .......................................................................................................32 4.4 BAND EDGE MEASUREMENT ...............................................................................40 4.4.1 LIMITS OF BAND EDGE MEASUREMENT .............................................................40 4.4.2 TEST INSTRUMENTS .............................................................................................40 4.4.3 TEST SETUP ...........................................................................................................40 4.4.4 TEST PROCEDURES ..............................................................................................41 4.4.5 EUT OPERATING CONDITION ...............................................................................41 4.4.6 TEST RESULTS .......................................................................................................42 4.5 CONDUCTED SPURIOUS EMISSIONS ..................................................................46 4.5.1 LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT ..................46 4.5.2 TEST INSTRUMENTS .............................................................................................46 4.5.3 TEST PROCEDURE ................................................................................................47 4.5.4 TEST SETUP ...........................................................................................................47 Report No.: RF970124L03-1 3 Report Format Version 2.1.0 4.5.5 EUT OPERATING CONDITIONS .............................................................................47 4.5.6 TEST RESULTS .....................…

Text truncated - open the document above for the full version.

Report No.: RF970124L03-2 1 Report Format Version 2.1.0 FCC TEST REPORT (Part 24) REPORT NO.: RF970124L03-2 MODEL NO.: MC7506 RECEIVED: Jan. 24, 2008 TESTED: Feb. 21 ~ Mar. 12, 2008 ISSUED: Mar. 13, 2008 APPLICANT: Symbol Technologies, Inc. ADDRESS: One Symbol Plaza, Holtsville, NY 11742-1300, U.S.A. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF970124L03-2 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1 CERTIFICATION .......................................................................................................4 2 SUMMARY OF TEST RESULTS ...............................................................................5 2.1 MEASUREMENT UNCERTAINTY ............................................................................5 3 GENERAL INFORMATION........................................................................................6 3.1 GENERAL DESCRIPTION OF EUT ..........................................................................6 3.2 DESCRIPTION OF TEST MODES ............................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..........................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .........................................14 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................14 4 TEST TYPES AND RESULTS .................................................................................15 4.1 OUTPUT POWER MEASUREMENT ......................................................................15 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT....................................................15 4.1.2 TEST INSTRUMENTS.............................................................................................16 4.1.3 TEST PROCEDURES .............................................................................................17 4.1.4 TEST SETUP...........................................................................................................18 4.1.5 EUT OPERATING CONDITIONS ............................................................................18 4.1.6 TEST RESULTS ......................................................................................................19 4.2 FREQUENCY STABILITY MEASUREMENT...........................................................26 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .......................................26 4.2.2 TEST INSTRUMENTS.............................................................................................26 4.2.3 TEST PROCEDURE................................................................................................27 4.2.4 TEST SETUP.....................................................................................…

Text truncated - open the document above for the full version.