H9PMC9063AMobile Computer

© 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Symbol products. Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com Patents This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562; D436,104. Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 rev. 06/02 Warranty (A) Warranty Symbol Technologies (hereafter “Seller”) hardware Products are warranted against defects in workmanship and materials for a period of twelve (12) months from the date of shipment, unless otherwise provided by Seller in writing, provided the Product remains unmodified and is operated under normal and proper conditions. Warranty provisions and durations on software, integrated installed systems, Product modified or designed to meet specific customer specifications (“Custom Products”), remanufactured products, and reconditioned or upgraded products, shall be as provided in the applicable Product specification in effect at the time of purchase or in the accompanying software license. (B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance of Products) are warranted against defects in workmanship and materials for a period of thirty (30) days from the date of shipment. Spare parts may be new or originate from returned units under the conditions set forth in subsection D below. (C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement, including repairs covered by warranty, the repair services provided are warranted against defects in workmanship and materials on the repaired component of the Product for a period of thirty (30) days from the shipment date of the repaired Product, or until the end of the original warranty period, whichever is longer. (D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies that originate from returned products and that have been tested as meeting applicable specifications for equivalent new material and Products. The sole obligation of Seller for defective hardware Products is limited to repair or replacement (at Seller’s option) on a “return to service depot” basis with prior Seller authorization. Customer is responsible for shipment to the Seller and assumes all costs and risks associated with this transportation; return shipment to the Customer will be at Seller's expense. Customer shall be responsible for return shipment charges for product returned where Seller determines there is no defect (“No Defect Found”), or for product returned that Seller determines is not eligible for warranty repair. No charge will be made to Buyer for replac…

Text truncated - open the document above for the full version.

SYMBOL TECHNOLOGIES. Symbol Place, Winnersh Triangle, Berkshire, England RG41 5TP Telephone: +44 (0) 118 945 7000 Fax: +44 (0) 118 945 7500 Web site: www.symbol.com Registered Office: Symbol Place, Winnersh Triangle, Berkshire RG41 5TP Registration No. 1096253 - England MB/Attestation/MC9063 (EM3420, RLAN and BT) EMEA Division 17 th March 2004 Intertek Testing Services NA, Inc. 1365 Adams Court Menlo Park, CA 94025 USA Attestation Statement - FCC ID: H9PMC9063A - Company: Symbol Technologies, Inc. - Type of Application: New Application - Product: MC9063 Mobile Computer The terminal utilizes the approved Sierra Wireless EM3420 CDMA module, Symbol 21-64436 Main Terminal Module with embedded RLAN Radio and the Symbol 21- 64381 Bluetooth Module. These modules have not been modified for integration. Sincerely, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected]

Symbol Technologies, Inc. ƒ One Symbol Plaza, Holtsville, NY 11742-1300 ƒ +1.631.738.2400 ƒ www.symbol.com March 12, 2004 Gemini WAN contains 3 radios: 802.11b/WiFi, Bluetooth, and either a CMDA or GPRS WAN modem. To meet regulatory requirements, only one radio will be operated at a time. This is accomplished by a radio power UI (user interface) that does not allow more than one radio to be powered-on at time (see the attached UI screen). The UI contains three buttons that act as radio power status indicators-- only one of these buttons can be enabled at a time. Further, there is a software interlock that disallows WiFi and Bluetooth from being powered-on simultaneously. Worldwide Regulatory Engineering

SYMBOL TECHNOLOGIES. Symbol Place, Winnersh Triangle, Berkshire, England RG41 5TP Telephone: +44 (0) 118 945 7000 Fax: +44 (0) 118 945 7500 Web site: www.symbol.com Registered Office: Symbol Place, Winnersh Triangle, Berkshire RG41 5TP Registration No. 1096253 - England MB/Confidentiality/MC9063 (EM4320, RLAN, BT) EMEA Division 17 th March 2004 Intertek Testing Services NA, Inc. 1365 Adams Court Menlo Park, CA 94025 USA Confidentiality Request This application covers a New application under the FCC ID number listed below. - FCC ID: H9PMC9063A - Company: Symbol Technologies, Inc. - Type of Application: New Application - Product: MC9063 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Symbol Technologies Inc. hereby requests confidential treatment of information accompanying as outlined below: • Schematics • Block Diagrams • Component Views • Bill of Materials • Technical Description • Theory of Operation • Integration Guide • Antenna Specifications The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected]

SYMBOL TECHNOLOGIES. Symbol Place, Winnersh Triangle, Berkshire, England RG41 5TP Telephone: +44 (0) 118 945 7000 Fax: +44 (0) 118 945 7500 Web site: www.symbol.com Registered Office: Symbol Place, Winnersh Triangle, Berkshire RG41 5TP Registration No. 1096253 - England MB/Application/MC9063 (EM3420_RLAN_BT) EMEA Division 17 th March 2004 Intertek Testing Services NA, Inc. 1365 Adams Court Menlo Park, CA 94025 USA Letter of Application This application covers a new FCC application under the FCC ID number listed below. - FCC ID: H9PMC9063A - Company: Symbol Technologies, Inc. - Type of Application: New Application - Product: MC9063 Mobile Computer - Reason for Application: Integration of three approved radio modules (CDMA, RLAN & Bluetooth) into a Terminal, by adding Internal Antennas Standard Battery and Housing supporting Full Alpha Numeric Keypad - Comment: Initial release of the terminal will NOT support simultaneous transmit of co-located transmitters This testing confirms continual compliance to the applicable FCC regulations. Yours sincerely, Marco Belli Symbol Regulatory Compliance Direct Tel: +44 118 945 7313 Direct Fax: +44 118 945 7274 Email: [email protected]

From: Bryan Taylor ES-Lex Sent: Wednesday, March 31, 2004 1:47 PM To: Roland Gubisch ES-Box Cc: David Chernomordik ES-Mpk Subject: SAR issues with H9PMC9063A Roland, 1) The belt clip has a metallic spring. The headset has a metallic spring fixture to to attach the headset to the head. The case itself has no metallic elements. 2) The separation distance provided from the phantom to the EUT is 35 mm. 23mm are due to the belt clip and 12mm are due to the thickness of the case. 3) Radiated power measurements were performed and are listed on page 10 of the report (maximum measured ERP/EIRP). During the measurement the output power was monitored using a spectrum analyzer and a small probe antenna to ensure that the power did not change too much. 4) Noted. 5) Noted. 6) It looks as if the 900 MHz dipole validation plot was taken without the dipole in the exact spot it normally is at. This would cause the offset SAR distribution if the software was not informed that the dipole was not in the center of the phantom. The maximum SAR value is still valid, it just looks a bit off. Let me know if there is anything else needed. Best regards, Bryan TO: David Chernomordik Bryan Taylor FROM: R. W. Gubisch DATE: March 30, 2004 RE: TCB Review of Symbol FCC ID: H9PMC9063A Review of this application is complete and the following points are noted: Administrative Confidentiality request lists "Integration Guide," I cannot identify one. Please explain or provide. 15C EMC Report 1. Test report is unsigned. Please furnish version with signatures. 2. Please provide AC line conducted data and setup photos. 22H and 24E EMC Report No questions. SAR Report and Plots 1. Please indicate if the belt clip, headset or carrying case has metallic elements. 2. What is the actual separation distance provided by the belt clip? 3. Please identify what RF power measurements were performed during SAR testing to assure that SAR data is comparable to 15C/22H/24E data. 4. Comment: SAR profile in Exhibit 18 is truncated and should have been repeated, although expected SAR is very low. Please re-do truncated SAR plots in future submissions. 5. Comment: Page 8 section header "Measurement Tractability" should be "Measurement Traceability." Certification can proceed when these issues are resolved. Thank you, Roland Gubisch -----Original Message----- From: Marco Belli [mailto:[email protected]] Sent: Monday, March 29, 2004 9:15 AM To: David Chernomordik ES-Mpk Subject: RE: Internal photos When we go to production - the terminal sample will use 'professional' copper tape - it is sandwiched between insulating tape, this is to prevent shorting out components. With regards the effect of this tape it will be IDENTICAL as what has been submitted for testing. If you need the brand name I will get it for you. Rgds Marco >>> "David Chernomordik ES-Mpk" <[email protected]> 29/03/04 17:05:06 >>> Hi Marco, I understand that the question is not what is the reason for this copper tape. The question is that the device is a prototype which will not be identical to the production device, as I don't think the copper will be on the production devices, unless you declare different. David -----Original Message----- From: Marco Belli [mailto:[email protected]] Sent: Sunday, March 28, 2004 11:45 PM To: David Chernomordik ES-Mpk Subject: Re: Internal photos Hi David I received confirmation from our engineering team with regards to the copper tape. ######################## Both items were incorporated to address RF desensitization of the CDMA radio receiver by local (near-field) EMI within the terminal. ######################## Rgds Marco >>> "David Chernomordik ES-Mpk" <[email protected]> 26/03/04 22:27:58 >>> Hi Marco When we open the Brick for photographs, we recognized that there are some parts covered with a copper tape. What is it? The TCB reviewer asked for explanation. David

External Photographs, FCC ID: H9PMC9063A

Regulatory compliance MC9063 Label Longer Enclosure with full Alpha Numeric Keypad (CDMA, RLAN & BT) Symbol Technologies, Inc. Page 1 of 1

Internal Photographs, FCC ID: H9PMC9063A

This report may be reproduced only with the written permission of ITS/TestMark Laboratories and if reproduced must be reproduced in its entirety. This report must not be used to claim product endorsement by NVLAP or any agency of the U.S. Government. The results contained in this report were derived from measurements performed on the identified test samples. Any implied performance of other samples based on this report is dependent on the representative adequacy of the samples tested. SPECIFIC ABSORPTION RATE (SAR) TEST REPORT Symbol Technologies One Symbol Plaza B-13 Holtsville NY 11742 Product: Mobile Computer Model: MC9063 FCC ID: H9PMC9063A IC ID: 1549D-MC9063A Tested to the SAR Criteria in FCC OET Bulletin 65, Supplement C (Edition 01-01) Date: February 27, 2004 Project: 3054379 Prepared By:_______________________________Date:____2-27-2003________ Jason Centers, Project Engineer Approved By:______________________________Date:____2-27-2003_________ Bryan C. Taylor, Team Leader – Engineering Intertek Testing Services NA, Inc. 731 Enterprise Drive, Lexington, KY 40510 Telephone: 859-226-1000 Fax: 859-226-1040 Web: www.etlsemko.com 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 2 of 22 FCC Part 2 & RSS-102 SAR Evaluation TABLE OF CONTENTS 1.0 Document History .......................................................................................................................... 3 2.0 References....................................................................................................................................... 3 3.0 Introduction.................................................................................................................................... 4 Modifications required for compliance............................................................................................ 4 4.0 Test Site Description ...................................................................................................................... 5 Measurement Equipment ................................................................................................................. 6 Measurement Uncertainty ................................................................................................................ 7 Measurement Tractability ................................................................................................................ 8 5.0 Job Description .............................................................................................................................. 9 Test Sample Description ................................................................................................................ 10 Test Sample Photographs............................................................................................................... 11 6.0 System Verification ...................................................................................................................... 13 Dipole System Validation .............................................................................................................. 13 Tissue Simulating Liquid Description (Percentage by Weight) and Validation ............................ 13 7.0 Evaluation Procedures................................................................................................................. 15 Test Positions:................................................................................................................................ 15 Reference Power Measurement: ....................................................................................................15 Coarse Scan: .................................................................................................................................. 15 Zoom Scan: .................................................................................................................................... 15 Data Extrapolation: ........................................................................................................................ 15 Reference Power Measurement: ....................................................................................................16 RF Ambient Activity: .................................................................................................................... 16 8.0 Configuration / Test Photographs .............................................................................................. 17 9.0 Criteria.......................................................................................................................................... 20 10.0 Engineering Judgments ............................................................................................................... 20 11.0 Tabular Test Results.................................................................................................................... 21 Data Mode Tabular Test Results.................................................................................................... 21 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 3 of 22 FCC Part 2 & RSS-102 SAR Evaluation 1.0 Document History Revision/ Job Number Writer Initials Date Change 1.0 /3055363 BCT February 27, 2004 Original document 2.0 References 1] ANSI, ANSI/IEEE C95.1-1991: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz, The Institute of electrical and Electronics Engineers, Inc., New York, NY 10017, 1992 [2] Federal Communications Commission, “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields”, OET Bulletin 65, FCC, Washington, D.C. 20554, 1997 [3] Thomas Schmid, Oliver Egger, and Niels Kuster, “Automated E-field scanning system for dosimetric assessments”, IEEE Transactio…

Text truncated - open the document above for the full version.

731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 1 of 22 FCC Part 2 & RSS-102 SAR Evaluation 1.0 GRAPHICAL TEST RESULTS Please note that the graphical visualization of the phone position onto the SAR distribution gives only limited information on the current distribution of the device, since the curvature of the head results in graphical distortion. Full information can only be obtained either by H-field scans in free space or SAR evaluation with a flat phantom. 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 2 of 22 FCC Part 2 & RSS-102 SAR Evaluation SAR PLOTS FOR SYSTEM VERIFICATION Exhibit 1: 900 MHz Dipole Validation 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 3 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 2: 1800 MHz Dipole Validation 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 4 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 3: 1800 MHz Dipole Validation 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 5 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 4: 2450 MHz Dipole Validation 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 6 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 5: 2450 MHz Dipole Validation 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 7 of 22 FCC Part 2 & RSS-102 SAR Evaluation SAR PLOTS FOR CDMA CELL AND PCS BANDS Exhibit 6: CDMA Cell Channel 384 Screen Facing In 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 8 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 7: CDMA Cell Channel 384 Screen Facing In With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 9 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 8: CDMA Cell Channel 384 Screen Facing Out 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 10 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 9: CDMA Cell Channel 384 Screen Facing Out With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 11 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 10: CDMA Cell Channel 600 Screen Facing In 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 12 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 11: CDMA Cell Channel 600 Screen Facing In With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 13 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 12: CDMA Cell Channel 600 Screen Facing Out 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 14 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 13: CDMA Cell Channel 600 Screen Facing Out With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 15 of 22 FCC Part 2 & RSS-102 SAR Evaluation SAR PLOTS FOR RLAN BANDS Exhibit 14: RLAN Channel 6 Screen Facing In 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 16 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 15: RLAN Channel 6 Screen Facing In With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 17 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 16: RLAN Channel 6 Screen Facing Out 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 18 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 17: RLAN Channel 6 Screen Facing Out With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 19 of 22 FCC Part 2 & RSS-102 SAR Evaluation SAR PLOTS FOR BLUETOOTH BANDS Exhibit 18: Bluetooth Channel 2443 Screen Facing In 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 20 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 19: Bluetooth Channel 2443 Screen Facing In With Extra Battery 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 21 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 20: Bluetooth Channel 2443 Screen Facing Out 731 Enterprise Drive, Lexington KY 40510 Symbol Technologies, Model No: MC9063 FCC ID: H9PMC9063A File: 3054379 Page 22 of 22 FCC Part 2 & RSS-102 SAR Evaluation Exhibit 21: Bluetooth Channel 2443 Screen Facing Out With Extra Battery

APPENDIX A - E-Field Probe Calibration Data APPENDIX A – Phantom Certificate APPENDIX B – 900 MHz Dipole Calibration Certificate

EMC Report for Symbol Technologies Inc. on the MC9063 File: 30443791 Page 1 of 28 TEST REPORT Report Number: 30443791 Project Number: 3044379 March 19, 2004 Revised: March 30, 2004 Testing performed on the Mobile Computer Model: MC9063 FCC ID: H9PMC9063A IC ID: 1549D-MC9063A to FCC Parts: 15 (Subparts C & B), 22H & 24E for Symbol Technologies Inc. A2LA Certificate Number: 1755-01 Test Performed by: Test Authorized by: Intertek Testing Services 1365 Adams Court Menlo Park, CA 94025 Symbol Technologies Inc. One Symbol Plaza Holtsville, NY 11742-1300 Tested by: Date: March 23, 2004 Bruce Gordon Reviewed by: Date: March 23, 2004 David Chernomordik This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report for Symbol Technologies Inc. on the MC9063 File: 30443791 Page 2 of 28 TABLE OF CONTENTS 1.0 Test Rationale............................................................................................................................... 3 2.0 Summary of Tests ........................................................................................................................ 4 3.0 General Description ..................................................................................................................... 5 3.1 Product Description .......................................................................................................... 5 3.2 Related Submittal(s) Grants .............................................................................................. 6 3.3 Test Methodology ............................................................................................................. 6 3.4 Test Facility ...................................................................................................................... 6 4.0 System Test Configuration.......................................................................................................... 8 4.1 Support Equipment and description.................................................................................. 8 4.2 Block Diagram of Test Setup............................................................................................ 8 4.3 Justification ....................................................................................................................... 9 4.4 Software Exercise Program............................................................................................. 10 4.5 Mode of operation during test......................................................................................... 10 4.6 Modifications required for Compliance.......................................................................... 10 4.7 Additions, deviations and exclusions from standards ..................................................... 10 5.0 RLAN Test .................................................................................................................................. 11 5.1 EIRP measurement.......................................................................................................... 11 5.2 Radiated emission measurement ..................................................................…

Text truncated - open the document above for the full version.