I28-RFIDM6EMUHF RFID Module

Installation Guide M6e-Micro Compliance and Regulatory Statements FCC Compliance Statement (USA) This device complies with Part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the product manuals, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to do one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced RF service technician for help. The end product must be labeled, in a visible area, with the following: Contains FCC ID: I28-RFIDM6EM Modification Warning The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies could void the user’s authority to operate the equipment. To ensure compliance, this printer must be used with fully shielded communication cables. RF Exposure Statement This transmitter complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Canadian DOC Compliance Statement Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This Class B digital apparatus complies with Canadian ICES-003. Industry Canada (IC) Warning Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference., 2) This device must accept any interference, including interference that may cause undesired operation of the device. The end product must be labeled, in a visible area, with the following: Contains IC: 3798B-RFIDM6EM Approved Antenna information Only Zebra approved antennas are allowed and cannot be user replaceable. Antenna PN: P1046176-101 Type: Loop\Coil Gain: -28dBi General The M6e‐Micro RFID module has been certified as a Limited Single Modular. Additional evaluation is required for use in all host devices. The following describes the installation procedures for the various hosts in which the module has been evaluated. Installation Instructions for ZD500R The M6e‐Micro is not intended for OEM integrators or end users. It can only be installed in the ZD500R printer at the grantee manufacturing facility.

UHF RFID Module, M6e-Micro

8/22/20 (Produ is seek check o The EU check o as deta Questi o 1. 2. 3. 4. 5. 6. 7. 8. Note: (1) (2) (3) 333 Corp Vernon H T: +1 847 F: +1 847 www.zebr 013 uct name) FCC king FCC Autho one). UT meets the re one) ailed in FCC pub ons are: * Pleas “The modul “The modul “The modul “The modula r Yes / “The modul I28-RFIDM6 E “The modu “The modula r the transmitt explain any s “The modul No ) LMA may be LMA will also the final insta operating co installed in d When LMA i s product into w product is alw ) Please provid parties to use ) For non-Soft device, techn modification orate Woods Park Hills, IL 60061-310 7 634 6700 7 913 8766 ra.com ID : I28-RFID rization as a equirements for blic Notice DA00 e provide a deta ar transmitter m ar transmitter m ar transmitter m r transmitter mu No ar transmitter m EM was tested i lar transmitter r transmitter m ter and the ma uch requiremen ar transmitter m e granted when o o be issued in th allation of the de ndition on the LM evices produced s sought, the ap which the modu ways ensured. de Clear and sp e and/or integrat tware Defined Ra nical description must be provide kway 09 USA DM6EM , Single Modula Single Mod 0-1407. Complia ailed explanation must have its o must have buffe must have its o ust comply with must be tested n Zebra host ZD must be labele must comply wit anufacture mus nts.” Yes / must comply w one or more of th ose instances w evice, such that c MA for the modu d by a specific m plication for equ le will be installe ecific instruction te the module in adio transmitter of how such co ed (see KDB 594 ar transmitter / dular approval / ance to each of t n if the answer is own RF shieldin ered modulatio own power supp h the antenna r in a stand-alon D500R. d with its own th any specific st provide ade / No with any applica he requirements where applicants compliance of th ule must state th manufacturer. uipment certificat ed, and will be m ns describing the to a host device modules where ntrol is impleme 4280). / Single Lim / Single Lim the requirements s “No.” ng.” Yes / on/data inputs.” ply regulation.” requirements of ne configuration FCC ID number c rule or operat equate instruct ble RF exposur s in the table abo can demonstrat he end product is at the module is tion must specifi maintained, such e conditions, limi e. software is used nted to ensure p mited Modular A mited Modular A s is described be / No ” Yes / ” Yes / f section 15.203 n.” Yes / r.” Yes / ting requiremen tion along with re requirements ove cannot be de te that they will r s assured. In suc s only approved call y state how c that full complia tations and proc d to ensure com prevention of thir Approval (Pleas Approval (pleas elow: No No 3 and 15.204(c) No No nts applicable t h the module t s.” Yes emonstrated. retain control ove ch cases, an for use when control of the en ance of the end cedures for third mpliance of the rd party se se ).” to to / er nd -

RFID Radio Module-Top View RFID Radio Module-Bottom View RFID Antenna-Top View RFID Antenna-Bottom View

Host Top View Host Bottom View Host Rear View Host Front View Host Right Side View Host Left Side View

Label Location

Host Cover off Host Main Board N Radio Module-Top View N Radio Module-Bottom View N Radio Antenna-Top View N Radio Antenna-Bottom View RFID Module-Top View RFID Module-Bottom View RFID Antenna-Top View RFID Antenna-Bottom View PCB 1-Top View PCB 1-Top View PCB 2-Top View PCB 2-Bottom View Keypad Board-Top View Keypad Board-Bottom View

775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: SL13080801-ZBR-047-RFID-RF Exposure Report No.: NONESupersede Report No.: Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, 95035 CA RF Exposure TEST REPORT This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. This Test Report is Issued Under the Authority of: Nima Molaei David Zhang Test Engineer Engineer Reviewer Applicant : Zebra Technologies Corporation Product Name : RFID Module Model No. : M6e-Micro Test Standard : FCC 47 CFR §1.1307(b) FCC 47 CFR §1.1310 Test Method : FCC 47 CFR §1.1310 FCC OST/OET Bulletin Number 65 FCC ID : I28-RFIDM6EM IC ID : 3798B-RFIDM6EM Dates of test : Agust 8th - August 23th , 2013 Issue Date : 9/19/2013 Test Result : ☒ ☐ Pass Fail Equipment complied with the specification [X ] Equipment did not comply with the specification [ ] Test report No. SL13080801-ZBR-047-RFID-RF Exposure Page 1 of 8 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC (RCB 208) RF , Telecom HongKong OFTA (US002) RF , Telecom Test report No. SL13080801-ZBR-047-RFID-RF Exposure Page 2 of 8 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: CONTENTS 1 REPORT REVISION HISTORY ....................................................................................................................................... 3 2 EXECUTIVE SUMMARY ................................................................................................................................................. 4 3 CUSTOMER INFORMATION .......................................................................................................................................... 4 4 TEST SITE INFORMATION ............................................................................................................................................ 4 5 MODIFICATION ............................................................................................................................................................. 4 6 EUT INFORMATION ...................................................................................................................................................... 5 6.1 EUT Description ........................................................................................................................................................ 5 6.2 Radio Description ...................................................................................................................................................... 5 7 MPE CALCULATION ..................................................................................................................................................... 6 Test report No. SL13080801-ZBR-047-RFID-RF Exposure Page 3 of 8 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: 1 Report Revision History Report No. Report Version Description Issue Date SL13080801-ZBR-047-RFID-RF Exposure Original - 09/19/2013 Test report No. SL13080801-ZBR-047-RFID-RF Exposure Page 4 of 8 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: 2 Executive Summary The purpose of this test program was to demonstrate compliance of the Zebra Technologies Corporation , RFID Module, and model: M6e-Micro to be installed into a printer host (Printer Model: ZD500R) against the current Stipulated Standards. The M6e-Micro has demonstrated compliance with the Stipulated Standard listed on 1 st page. 3 Customer information Applicant Name : Zebra Technologies Corporation Applicant Address : 333 Corporate Woods Parkway , Vernon Hills, IL 60061 USA Manufacturer Name : Zebra Technologies Corporation Manufacturer Address : 333 Corporate Woods Parkway , Vernon Hills, IL 60061 USA 4 Test site information Lab performing tests : SIEMIC Laboratories Lab Address : 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. : 881796 IC Test Site No. : 4842D-2 VCCI Test Site No. : A0133 5…

Text truncated - open the document above for the full version.

775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: SL13080801-ZBR-047-RFID-FCC_Rev1.0 Report No.: NONESupersede Report No.: Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, 95035 CA RF TEST REPORT This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. This Test Report is Issued Under the Authority of: Nima Molaei David Zhang Test Engineer Engineer Reviewer Applicant : Zebra Technologies Corporation Product Name : RFID Module Model No. : M6e-Micro Test Standard : FCC 15.247: 2012 RSS 210 Issue8: 2010 Test Method : ANSI C63.4:2009 FCC Public Notice DA 00-705 FCC ID : I28-RFIDM6EM IC ID : 3798B-RFIDM6EM Dates of test : Agust 18th - August 23th , 2013 Issue Date : 9/19/2013 Test Result : ☒ ☐ Pass Fail Equipment complied with the specification [X ] Equipment did not comply with the specification [ ] Test report No. SL13080801-ZBR-047-RFID-FCC_Rev1.0 Page 1 of 49 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC (RCB 208) RF , Telecom HongKong OFTA (US002) RF , Telecom Test report No. SL13080801-ZBR-047-RFID-FCC_Rev1.0 Page 2 of 49 FCC ID I28-RFIDM6EM IC ID 3798B-RFIDM6EM 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at: CONTENTS 1 REPORT REVISION HISTORY ....................................................................................................................................... 3 2 EXECUTIVE SUMMARY ................................................................................................................................................. 4 3 CUSTOMER INFORMATION .......................................................................................................................................... 4 4 TEST SITE INFORMATION ............................................................................................................................................ 4 5 MODIFICATION ............................................................................................................................................................. 4 6 EUT INFORMATION ...................................................................................................................................................... 5 6.1 EUT Description ........................................................................................................................................................ 5 6.2 Radio Description ...................................................................................................................................................... 5 6.3 EUT test modes/configuration Description.................................................................................................................... 6 6.4 EUT test modes/configuration for Spurious Emission and BandEdge .............................................................................. 6 6.5 Host Photos – External .............................................................................................................................................. 7 6.6 Host Photos – Internal ............................................................................................................................................... 8 6.8 EUT Photos ............................................................................................................................................................ 10 6.9 EUT Test Setup Photos ........................................................................................................................................... 11 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION ....................................................................... 12 7.1 Supporting Equipment ............................................................................................................................................. 12 7.2 Cabling Description ................................................................................................................................................. 12 7.3 Test Software Description ........................................................................................................................................ 12 8 TEST SUMMARY ......…

Text truncated - open the document above for the full version.

Radiated Emission (<1GHz) – Front View Radiated Emission (<1GHz) – Rear View Radiated Emission (>1GHz) – Front View Radiated Emission (>1GHz) – Rear View Conducted Emisson – Front View Conducted Emisson – Rear View