I28MD-QL4137WLAN Module for QL Series Printers

ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137

Digital Transmitter System (DTS), FCC Rule Part 15.247 PCTEST LAB TEST REPORT Part 15.247 FCC MEASUREMENT REPORT Reviewed by: Quality Manager Filename: 15. 230211040.I28 Test Dates: March 3, 2003 FCC ID: I28MD-QL4137 EUT: WLAN Module for QL Series Printers Page 36 of 48 © 2003 PCTEST Engineering Laboratory, Inc. CONFIDENTIAL PROPERTY OF PCTEST EXHIBIT B – Labeling Requirements Sample Label & Location New Labeling Requirements Per 2.1074 & 15.19; Docket 95-19 The sample label shown below shall be permanently affixed at a conspicuous location on the device; instruction manual or pamphlet supplied to the user and be readily visible to the purchaser at the time of purchase. However, when the device is so small wherein placement of the label with specified statement is not practical, only the trade name, FCC ID, and the FCC logo must be displayed on the device per Section 15.19 (b)(2). Digital Transmitter System (DTS), FCC Rule Part 15.247 PCTEST LAB TEST REPORT Part 15.247 FCC MEASUREMENT REPORT Reviewed by: Quality Manager Filename: 15. 230211040.I28 Test Dates: March 3, 2003 FCC ID: I28MD-QL4137 EUT: WLAN Module for QL Series Printers Page 37 of 48 © 2003 PCTEST Engineering Laboratory, Inc. CONFIDENTIAL PROPERTY OF PCTEST EXHIBIT B – Labeling Requirements (Cont.) Sample Label & Location FCC ID Label

ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE REV. 3 9/17/02 333 Corporate Woods Parkway Vernon Hills, Illinois 60061.3109 U.S.A. Telephone +1.847.634.6700 Facsimile +1.847.913.8766 www.zebra.com ZEBRA MOBILE LINE QL SERIES PRINTER SPECIFICATIONS Specifications are provided for reference and are based on printer tests using Zebra brand stock and labels. Results may vary in actual application settings or when using other than recommended Zebra supplies. Zebra recommends always qualifying any application with thorough testing. Standard Features • 203 dpi print resolution (8 dots/mm) • Direct thermal printing of bar codes, text, and graphics • CPCL programming language • 1 MB Flash for downloadable programs, receipt formats, scalable fonts and graphics (optional up to 2 MB) • 1 MB SRAM (optional up to 2 MB) • 7.4 V, 2.1 AHr (QL 220, QL 320) 4.2 Ahr (QL 420) removable, rechargeable Li-Ion battery • Serial RS-232 (8 Pin) port for 1-way or 2-way communication to terminal or other host up to 115.2 Kbps • Resident Scaleable Fonts • Flexible Ordering & Configuration options tailored to meet user’s present and future application requirements. • Fixed reflective (black mark) media sensing • Print speeds of up to 4 ips • Tear bar for easy receipt dispensing • QuickFlip, one step peel and present mode • Supports vertical or horizontal printing • Power on/off from printer keys, terminal or host • Center- loading media locking for variable roll widths • “Clamshell” design for easy loading • Rubber-infused plastic housing eliminates need for environmental case • Tolerance of multiple drops up to 5’ to concrete Optional Features • Battery Charging Options – include: ⇒ Fast Charger- the LI72 series of fast chargers is the recommended charging method. Average charge time is 2-3 hours. LI72 fast chargers have LEDs to clearly indicate battery status during charging. ⇒ Quad Charger- the quad charger provides a convenient way to charge up to 4 batteries in a single location. Both the 2.1 Ahr and 4.2 Ahr Li- Ion batteries can be charged in the same unit. • QuickLink™ Connectivity Options: ⇒ Bluetooth ⇒ Optional 2.4 GHz, 802.11b (Symbol CF or Cisco PCMCIA) with Kerberos or LEAP functionality • LCD control panel • Up to 2MB SRAM; 2MB Flash • Linerless printing Software • Printer Control Language – The QL Series of mobile printers easy integration into existing systems that run Zebra mobile printers – come equipped with CPCL ensuring without the need for additional software. Zebra Printer Control Language and Eltron Printer Control Language emulators are also available. Printing Specifications • 203 dpi resolution (8 dots/mm) • Programmable print speed: up to 4 ips (101.6 mm) Media Specifications NOTE: For optimum print quality and printer performance, use of genuine Zebra Supplies is recommended. QL 220 QL 320 QL 420 Min. Media Width .75” (19.05mm) 1.25” (31.8mm) 2.0” (50.8mm) Max. Media Width 2.12” (53.9mm) 3.12” (79.3mm) 4.12” (104.6mm) Max. Print Width 1.9” (48.3mm) 2.9” (72mm) 3.9” (99.1mm) Max. Media Thickness .0070” (.178mm) .0070” (.178mm) .0070” (.178mm) Min. Print Length .5” (12.7mm) .5” (12.7mm) .5” (12.7mm) Max. Print Length 16” (406mm) 16” (406mm) 20” (508mm) Max. Roll Length 111.11’ with 2.4 mil journal 163.47’ with 2.4 mil journal 163.47’ with 2.4 mil journal Label Roll ID Core Min. .75” (19mm) .75” (19mm) .75” (19mm) Label Roll ID Core Max. 1.375” (34.9mm) 1.375” (34.9mm) 1.375” (34.9mm) Label Roll OD Max. 2.2” (55.88mm) 2.60” (66.0mm) 2.60” (66.0mm) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE REV. 3 9/17/02 Printer Control Language • Communicates in printable ASCII characters • Compatible with mainframe, mini, and PC hosts • Downloadable objects include graphics and bitmap Fonts, label templates and formats. • Label Vista for easy formatting and label design • Scalable concatenation • Advanced utilities to manage flash file systems, obtain information about firmware and applications, configure for use in other countries and set operating parameters • Automatic memory allocation for format while printing • Automatic serialization of fields • Automatic print head temperature compensation • Format inversion (white on black) • Four position field rotation (0º, 90º, 180º, 270º) • Power management controls and adjustable sleep mode • Programmable label odometer with on-demand terminal reporting • Status messages to host upon request • Monitor and report battery voltage and temperature • Easy network and security configuration Bar Code Symbologies & Specifications • Bar Code Ratios: 1.5:1, 2:1, 2.5:1, 3:1, 3.5:1 • Bar code Symbologies: Code 39, Code 93, Code 128; Codabar; Interleaved 2 of 5; FIM Postnet; UPC-A, UPC-E, 2 & 5 digit add-on; EAN-8, 13, 2 & 5 digit add-on; MSI /Plessey; UCC/EAN 128 • Two -dimensional Bar Codes: PDF 417 or MaxiCode Font Specifications: 203 dpi (8 dots/mm) Fonts Matrix (in dots) (H x W) Minimum Char. Size (H x W) Maximum CPI 0 (Standard) 9 x 8 .044" x .039" 25.4 1 (min. width) 48 x 13 .236" x .064" 15.6 1 (max. width) 48 x 39 .236” x .192” 5.2 2 (OCR-A) 12 x 20 .059" x .099" 10.2 4 Size 0 (min. width) 47 x 11 .232" x .054" 18.5 4 Size 0 (max. width) 47 x 43 .232” x .212” 4.7 5 Size 0 (min. width) 24 x 7 .118" x .034" 29 5 Size 0 (max. width) 24 x 23 .118” x .113” 8.8 6 (MICR) 27 x 28 .133" x .138" 7.3 7 24 x 12 .118" x .059" 16.9 • Supports pre-scaled and scalable fonts • Scalable text feature • Standard resident fonts can be rotated in 90° increments • Supports user defined fonts and graphics and logos • Text concatenation to assign different character styles • Allows text magnification 1-16 times the original size • Proportional and fixed-width fonts Communications Specifications • Serial interface: 8-pin DIN RS-232C port for one- way or two-way communication to terminal or other host up to 115.2 Kbps • Default Parameters: Baud Rate- 19,200; Parity- None; Data Bits- 8; Stop Bits-1; Handshaking- RTS/CTS • Software (XON/XOFF) or hardware (RTS/CTS) communication ha…

Text truncated - open the document above for the full version.

PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE (SAR EVALUATION) PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230211079.I28 Test Dates: March 3, 2003 EUT Type: WLAN Module for QL Series Printers FCC ID: I28MD-QL4137 Page 1 of 20 © 2003 PCTEST Engineering Laboratory, Inc. APPLICANT NAME & ADDRESS: DATE & LOCATION OF TESTING: Zebra Technologies Corporation Dates of Tests: March 3, 2003 30 Plan Way Test Report S/N: SAR.230211079.I28 Warwick, RI 02886-012 USA Test Site: PCTEST Lab, Columbia, MD USA Attn: Mr. Bob Heon FCC ID: I28MD-QL4137 APPLICANT NAME: ZEBRA TECHNOLOGIES CORPORATION EUT Type: WLAN Module for QL Series Printers Tx/Rx Frequency: 2412 – 2462 MHz (DTS) Max. RF Output Power: 89 mW (19.5 dBm) Conducted Max. SAR Measurement: 0.17 W/kg Trade Name/Model(s): ZEBRA QL Series Printers FCC Rule Part(s): §2.1093; FCC/OET Bulletin 65 Supplement C [July 2001] Application Type: Certification Test Device Serial No.: Identical Prototype [S/N: #00A0F83CCE46] This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-200X (Draft 6.5, January 15, 2002). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Limited Modular Approval. Output is conducted. This transmitter operates with a specific hand-held terminal and has been tested for SAR compliance for portable and hand-held configurations. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. SAR.230211079.I28 PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230211079.I28 Test Dates: March 3, 2003 EUT Type: WLAN Module for QL Series Printers FCC ID: I28MD-QL4137 Page 2 of 20 © 2003 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS 1. INTRODUCTION / SAR DEFINITION................................................................................3 2. SAR MEASUREMENT SETUP............................................................................................4 3. ALIDX-500 E-FIELD PROBE SYSTEM.................................................................................5 4. PROBE CALIBRATION PROCESS......................................................................................6 5. PHANTOM & EQUIVALENT TISSUES................................................................................7 6. TEST SYSTEM SPECIFICATIONS........................................................................................8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS...............................................................9 8. DEFINITION OF REFERENCE POINTS.............................................................................10 9. TEST CONFIGURATION POSITION................................................................................11 10. ANSI/IEEE C95.1 - 1992 RF EXPOSURE LIMITS................................................................12 11. MEASUREMENT UNCERTAINTIES..................................................................................13 12. SAR TEST DATA SUMMARY...........................................................................................14 13. SAR TEST EQUIPMENT..................................................................................................15 14. CONCLUSION..............................................................................................................16 15. REFERENCES.................................................................................................................17 EXHIBIT A. SYSTEM VERIFICATION......................................................................................18 EXHIBIT A. SAR DATA SUMMARY...................................................................................19-20 PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230211079.I28 Test Dates: March 3, 2003 EUT Type: WLAN Module for QL Series Printers FCC ID: I28MD-QL4137 Page 3 of 20 © 2003 PCTEST Engineering Laboratory, Inc. 1. INTRODUCTION / SAR DEFINITION The FCC has adopted the guidelines for evaluating the environmental effects of radiofrequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institute (ANSI) for localized specific absorption rate (SAR) in IEEE/ANSI C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. (c) 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.[2] The measurement procedure described in IEEE/ANSI C95.3-1992 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave[3] is used for guidance in measuring SAR due to the RF radiation exposure from the Equipment Under Test (EUT). These criteria for SAR evaluation are similar to those recommended by the National Council on Radiation Prote…

Text truncated - open the document above for the full version.

ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137

© 2003 PCTEST Engineering Laboratory, Inc. PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE MANUFACTURER NAME & ADDRESS: DATE & LOCATION OF TESTING: Zebra Technologies Corporation Date(s) of Tests: March 3, 2003 30 Plan Way Test Report S/N: 15.230211040.I28 Warwick, RI 02886-012 USA Test Site: PCTEST Lab, Columbia, MD Attn: Mr. Bob Heon FCC ID: I28MD-QL4137 APPLICANT: Zebra Technologies Corporation SUMMARY: Model No.: QL4137 Equipment EUT Type: WLAN Module for QL Series Printers Max. Output Power: 89 mW (19.5 dBm) Conducted Frequency Range: 2412 - 2462 MHz FCC Classification: FCC Part 15 Digital Transmission System (DTS) FCC Rule Part(s): Parts 15.247; ANSI C-63.4-2001 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4-2001. Grant Conditions: Limited Modular Approval. Output is conducted. This transmitter operates with a specific hand-held terminal and has been tested for SAR compliance for portable and hand-held configurations. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. 862. 25.230113012.ACJ Digital Transmitter System (DTS), FCC Rule Part 15.247 PCTEST LAB TEST REPORT 15.247 FCC MEASUREMENT Reviewed by: Quality Manager Filename: 15.230211128.I28 Test Dates: March 3, 2003 FCC ID: I28MD-QL4137 Model: QL1437 Page i of i © 2003 PCTEST Engineering Laboratory, Inc. CONFIDENTIAL PROPERTY OF PCTEST TABLE OF CONTENTS ATTESTATION STATEMENTS.............................................................................................................................1 FCC PART 15.247 MEASUREMENT REPORT COVER PAGE.........................................................................................2 1.0 INTRODUCTION.....................................................................................................................................................3 1.1 EVALUATION PROCEDURE....................................................................................................................................................................................................3 1.2 SCOPE.............................................................................................................................................................................................................................................3 1.3 PCTEST TEST LOCATION.........................................................................................................................................................................................................3 2.0 PRODUCT INFORMATION...................................................................................................................................4 2.1 EQUIPMENT DESCRIPTION.....................................................................................................................................................................................................4 2.2 ENCLOSURE..................................................................................................................................................................................................................................4 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS..............................................................................................................................................................4 3.0 DESCRIPTION OF TEST..........................................................................................................................................5 3.1 CONDUCTED EMISSIONS.......................................................................................................................................................................................................5 3.2 RADIATED EMISSIONS..............................................................................................................................................................................................................6 4.0 ANTENNA REQUIREMENTS..................................................................................................................................7 5.0 TEST EQUIPMENT CALIBRATION DATA.............................................................................................................8 EXHIBIT A. SUMMARY OF TEST RESULTS.....................................................................................................................9 EXHIBIT A. 6dB BANDWIDTH MEAUREMENT..............................................................................................................10-12 EXHIBIT A. OUTPUT POWER MEASUREMENT..............................................................................................................13-15 EXHIBIT A. POWER SPECTRAL DENSITY........................................................................................................................16-18 EXHIBIT A. BANDEDGE..................................................................................................................................................19 EXHIBIT A. RADIATED FUNDAMENTAL & HARMONIC MEASUREMENTS.................................................................20…

Text truncated - open the document above for the full version.

ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137 ZEBRA FCC ID: I28MD-QL4137 EUT Photographs © 2003 PCTEST Lab. WLAN Module for QL Series Printer Model: QL4137