I28RFID-R110XI-01Thermal Transfer on Demand Bar Code Printer

Zebra RXiIIIPlus ™ Printers User Guide Copyright © ZIH Corp. The copyrights in this manual and the label printer described therein are owned by Zebra Technologies. All rights are reserved. Unauthorized reproduction of this manual or the software in the label printer may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. IBM ® is a registered trademark of IBM Corporation. Adobe ® and Acrobat ® are registered trademarks of Adobe Systems Incorporated. Zebra ® , Stripe ® , ZPL ® , ZebraNet ® , ZebraLink™, and ZPL II ® are registered trademarks of Zebra Technologies. All other brand names, product names, trademarks, and registered trademarks are property of their respective holders. Part Number: 13383L R1 R110/R170XiIIIPlus User Guide i Table of Contents Proprietary Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Printer Software and Firmware License Agreement. . . . . . . . . . . . . . . . . . . . . . xv Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxii Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi Chapter 1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Panel Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Printer Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2 • Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpack and Inspect the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Report Shipping Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Store or Reship the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Select a Site for the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Select a Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide Proper Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Allow Proper Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide a Data Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connect the Printer to a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Communication Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Data Cable Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ii R110/R170XiIIIPlus User Guide Table of Contents Types of Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Continuous Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Non-Continuous Black Mark Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Non-Continuous Web Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 RFID “Smart” Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Chapter 3 • Printer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Load the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Load Roll Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Load Fanfold Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Load Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Remove Used Ribbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Print a Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Calibrate the Printer …

Text truncated - open the document above for the full version.

FCC ID: I28RFID-R110XI-01 LIST OF CRYSTAL FREQUENCIES The following is a list of crystal frequencies used in the Transmitter Model No: 110XiIII Transmitter: 896 MHz to 959 MHz & 7.5 MHz Printer: 133 MHz, 66 MHz, 33 MHz, 32 MHz, 25 MHz, 16 MHz, 8 MHz, & 3.6469 MHz

Printer Reader Specification CHARACTERISTIC DESCRIPTION Physical Dimensions Height 8.75” x Width 11.75“ x Depth 2” Weight ~ 6 pounds Base Material(s) Aluminum, Silver; Die-cast Visual Status Indicators LEDs for Power (Green), Activity (Yellow) and Error (Red) Connectivity Network RS422/485 10BaseT Ethernet RS232 Console (Management) Control I/O Port (6) (User programmable) RJ45 RJ45 DB9 DB15 RF Connectors 1.0/2.3 DIN Jack Read Points (Channels) 4 (4 Transmit and 4 Receive) 2 or more can be combined into one logical read point Power Supply +24vDC @ 1.2 amps Environmental Environmental Sealing IEC 529 IP54 Temperature IEC 60068-2-1/2/14 Operational: 0° to +55° C (+32° to +131° F) Storage: -20° to +70° C (-4° to +158° F) Humidity IEC 60068-30/56 5-95% Non-condensing Vibration IEC 60068-2-6 Compliance Safety EMI/RF Emissions Regulatory Region 1, FCC Part 15 Operational Features Frequency UHF band, 902-928 MHz Method Frequency Hopping Spread Spectrum (FHSS) Power Output Up to 30 dBm (only 1 Watt Part 15) Air Link Protocol EPCglobal: Class 0, Class 0+ Tag Communication Interleaved Tag Buffering Local Synchronization Network Time Protocol IP Addressing Static and Dynamic Host Interface Protocols XML and Byte Stream Network Management Protocol SNMP Configuration Via Setup Wizard Event Management Auto Reported Events User Controlled Thresholds, Damping and Filtering Administrative Management Security/Privilege Controls, Change Traceability Tag Management ID-based Selection Ability User-defined Association to Tag IDs Taglist Management Features for Reconciliation and Visibility

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 June 25, 2004 Applicant: Zebra Technologies Corporation Model: 110XiIII Certification Number: 3798A-R110XI01 Acknowledgement of IC Listing Requirements In signing this document I acknowledge that a certified product shall not be distributed, leased or offered for sale in Canada prior to its listing on the Industry Canada Radio Equipment List (REL). In addition, I acknowledge that to allow listing of the certified product, Nemko Canada will make available to Industry Canada all necessary information as required under IC CB-02 section 6.5, which may in turn be published on the REL on the Industry Canada website. William H. Graff President and Director of Engineering AmericanTCB 6731 Whittier Avenue McLean, VA 22101 (703) 847-4700 mailto: [email protected] On behalf of Zebra Technologies Corporation (Applicant)

RF Module Telenexus Release 1.1 March 4, 2004 4/27/2004 Frequency Table Frequency Frequency Selection 914.75 1 920.25 2 925.75 3 909.25 4 920.75 5 907.25 6 922.25 7 927.25 8 919.75 9 906.25 10 911.75 11 903.75 12 909.75 13 917.25 14 925.25 15 912.25 16 906.75 17 917.75 18 907.75 19 902.75 20 914.25 21 924.25 22 919.25 23 908.25 24 903.25 25 910.25 26 916.75 27 924.75 28 918.25 29 923.25 30 916.25 31 910.75 32 904.25 33 913.75 34 921.75 35 926.75 36 915.75 37 911.25 38 904.75 39 915.25 40 905.75 41 921.25 42 926.25 43 918.75 44 912.75 45 923.75 46 905.25 47 913.25 48 922.75 49 908.75 50 Table 5: Frequency Selection Table

Matrics, Inc. Model PR-100 Part Documentation Revision: 1 Description: PA Reader RFID EPC Class 0+ Manufacturer: Matrics Inc. Manufacturer P/N: 250018-001 Specifications: 1. RFID Protocols supported: Matrics Class 0 (read only), Class 0+ (read/write) 2. Input Voltage/Current: 9Vdc @ .5A 3. RF Output power: 0-1W, firmware controllable. 4. RF Output connector: SMA Jack Receptacle 5. RF Output type: One RX/TX port. Antenna is both RX and TX. 6. RF load: 50 ohm. 7. Communications interface: RS485, 115.2K baud, 8 data, No parity, 1 Stop bit, No flow control. Baud rate is factory set. 8. Compliance: Domestic US only. FCC part 15.

Zebra R110XiIIIPlus RFID printer/encoder, label, wristbands, verify data Page Name: http://www.zebra.com/PA/Printers/product_R110XiIIIPlus.htm Printers & Supplies > Bar Code Printers > RFID Printer/Encoders > R110XiIIIPlus R110 Xi III Plus TM Overview resolution: 203 dpi (8 dots/mm) width: 4.09" (104 mm) speed: 203 dpi: 10”/254 mm per second construction: 12-gauge steel frame ZebraLink-enabled: Yes Product Information: overview specifications (html) product brochure (pdf) Related Products & Resources: ZebraLink Information Fonts/Font Packs Find supplies for this printer ZebraNet PrintServer II how to buy Features & Applications „Integrated UHF RFID Reader/Encoder for EPC Class 0 (Matrics) tags and Matrics “Class 0+” tags. „ Enhanced Alert notification – monitors printhead condition „ZebraLink™ „ Multi-level Element Energy Equalizer (E3®) for superior print quality „Print methods: Thermal transfer or direct thermal „ Single 32 bit 133 Mhz RISC processor „Zebra printer driver for Windows® 3.X and Windows 95/98/NT 2000 „ Bi-fold media door with clear panel Applications Built upon Zebra’s highly regarded Xi platform, the R110XiIIIPlus is designed for high performance and mission-critical ruggedness in the most demanding environments. It delivers the legendary round-the-clock reliability and heavy-gauge steel durability of Zebra’s high-performance Xi series as well as full 4-inch print width, 203-dot per-inch resolution and the extensive connectivity choices of 110XiIIIPlus, making it ideal for shipping, warehousing, and manufacturing. The R110XiIIIPlus will support both Class 0 (read-only) and Class 0+ (read/write) tags from Matrics. This new printer/encoder features an integrated Matrics® Class 0/0+ RFID reader/encoder. By integrating the reader/encoder into the printer design, the R110XiIIIPlus offers end-users significant flexibility in tag placement and label size. The Zebra Advantage „ Innovative, high-quality leading technology products „ Broadest product line in the industry „Global Service & Support: Worldwide technical support, 24/7 online support „ Fast, friendly customer service with multilingual abilities „Global network of authorized resellers „ Competitive product warranty: 12-month labor & parts and 6-month printhead warranty © ZIH Corp. All Rights Reserved. Page 1 of 1Zebra.com 6/14/2004http://www.zebra.com/cgi-bin/print.cgi?pname=http://www.zebra.com&ppath=http://www...

333 Corporate Woods Parkway Vernon Hills, Illinois 60061.3109 U.S.A. Telephone +1.847.634.6700 Facsimile +1.847.913.8766 www.zebra.com FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Ladies and or Gentlemen: I appoint Brian J. Mattson or Arnom C. Rowe to act as agent in the preparation of applications under Part 15 of the Rules and Regulations of the Federal Communications Commission. I certify that the exhibits properly describe the device being submitted under this application and will implement any changes described in the test report. The following statement is required by the Federal Communications Commission: By checking yes, the applicant certifies that, in the case of an individual applicant, he or she is not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a), or, in the case of an non-individual applicant (e.g. corporation, partnership or other unincorporated association), no party to the application is subject to a denial of federal benefits, that includes FCC benefits, pursuant to that section. __X___ YES _____ NO Dated this 16th day of June 2004 Agency agreement expiration date: None By Mr. Charles A. Derrow Title Manager, Compliance Engineering Telephone 847.793.5719 Applicant Zebra Technologies Corporation Company Name

Letter of Agency Date: June 23, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Zebra Technologies Corporation authorizes D.L.S. Electronic Systems, Inc. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. FCC Labeling Requirements and Information Date: June 23, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: FCC Labeling Requirements FCC ID: I28RFID-R110XI-01 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Request for Confidentiality Date: June 21 3, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-01 Please be advised that the following information is to be held confidential and behalf of APPLICANT NAME: • Block Diagram • Schematics • Parts Lists The application contains technical information which Zebra Technologies Corporation deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Modification Letter Date: June 23, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-01 Please be advised that the following information is a list of modifications that will be included in the production process for the above-referenced equipment. Change 1: Change 2: Change 3: Change 4: Change 5: Change 6: Change 7: Change 8: Change 9 Change 10: Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Manufacturer’s Letter Date: June 23, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-01 To Whom It May Concern: Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc.

EXHIBIT 3 ENGINEER'S DECLARATION OF COMPLIANCE This equipment has been tested in accordance with the requirements contained in the appropriate Industry Canada regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with industry or Industry Canada standards and demonstrate that the equipment complies with appropriate standards. Each unit manufactured, imported or marketed as defined in the Industry Canada regulations, will conform to the sample(s) tested within the variations that can be expected due to quantity production and testing on a statistical basis. I further certify that the necessary measurements were made by: Dated this _________18th _____________ day of ______June, 2004___________ Agency agreement expiration date: None By: _______ ______Brian J. Mattson_____ Signature Printed Title: General Manager - D.L.S. Electronic Systems, Inc. Telephone: 847-537-6400 Applicant: Zebra Technologies Corporation

June 25, 2004 Attn: Director of Certification Authority to Act as Agent On behalf, I appoint AmericanTCB to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with: D.L.S. Electronic Systems, Inc. 1250 Peterson Drive Wheeling, Illinois 60090 Dated this ____25th____ day of ___June__, 2004. Agency Agreement Expiration Date: February 25, 2005 By: Arnom C. Rowe (Print name) Title: EMC Test Engineer, EMC 001375-NE On behalf of: Zebra Technologies Corporation (Company Name) Telephone: 847-537-6400

FCC ID: I28RFID-R110XI-01 D.L.S. ELECTRONIC SYSTEMS, INC. 1250 Peterson Drive Wheeling, Illinois 60090 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Gentlemen: We are submitting for Zebra Technologies Corporation, Inc., a R110XiIII Plus bar code printer with Transmitter, Model Number 110XiIII , with a FCC ID: I28RFID-R110XI-01 for Certification. This unit has been tested and complies to Part 15, Subpart C. If there are any questions in regards to this application, please call D.L.S. Electronic Systems, Inc. at (847) 537 6400. Enclosed you will find a copy of our test report with the information and results of tests that is required under Part 15, Section 15.247. Thank you for your assistance in this matter. Sincerely, Arnom C. Rowe EMC-001375-NE DLS/mm

Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Front of EuT Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Left Side of EuT Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Back Side of EuT Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Right Side of EuT

Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: FCC ID Label Location

Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Right Side of EuT Door Open Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Front Side of EuT Door Open with Antenna Placement Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Transmit Antenna Placement Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Left Side of EuT, Cover Removed Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Reader Board Placement in EuT Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Power Filter Board Placement in EuT Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Reader Board Assembly, Power Filter Board and Antenna Assembly Connected Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Component Side of Filter Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Trace Side of Filter Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Top Side of Antenna Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Bottom Side of Antenna Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Top Side of Reader Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Inside Top Cover of Reader Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Bottom Side of Reader Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Inside Bottom Cover of Reader Board Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Component Side of Reader PCB Company: Zebra Technologies Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-01 Date: 6/10/2004 Photo Description: Trace Side of Reader PCB

Product Description The Printer Reader is an industrial strength fixed Reader targeted to printer market and other smaller applications. The Reader offers superior and robust read range capabilities, anti-collision features, and very high data read rates unmatched by other systems. It can be easily mounted in areas of ingress and egress where large numbers of tagged objects are inbound or outbound in a logistics process. It is packaged ready to be interfaced to your host computer, and can easily be programmed to perform specific tasks. The Reader provides all of the RF and control functions required to power and communicate with Class 0 passive RFID tags. It sends digital data to the tag (through one antenna at any given time) on a pulse width modulated On Off Keyed (OOK) transmitter signal, demodulates the identification signal received from the tag, and then sends the data to your host computer. The Printer Reader network is structured to allow for flexibility in system configurations and in the arrangement of read points to optimize coverage at a low overall cost. The system also employs a unique, patented reader-driven interrogation protocol that allows up to two hundred (200) tags to be read each second. This powerful read rate supplies the muscle to overcome interference in noisy environments, and to guarantee acceptable read rates at each read point when large numbers of antennas are multiplexed together. Readers can be powered either locally or through the network cable in the event there is not a local power source near by, and to minimize overall network infrastructure costs.

RF Exposure Exhibit for Zebra I28RFID-110XI-01 Printer Since the EUT only transmits when it receives a signal from the computer, normal operation during transmission would have the user sitting at the computer, not touching the printer. There are no buttons on the device to make it transmit. This means a distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure and the body of the user or nearby persons. Therefore, this device is classified under section 2.1091 as a “mobile” device. Although this device is categorically excluded from RF exposure evaluation under Part 2, it can be shown that the device meets the limits used for evaluating other devices (those which are not excluded) under this section. Section 2.1091 for mobile devices states that the limits are given in 1.1310. The limit given in 1.1310 for general population at 927.25 MHz is a Maximum Permissible Exposure (MPE) limit of (f/1500) mW/cm 2 . For 927.25 MHz this limit is 0.618 mW/cm 2 . The FCC OET Bulletin 65 Section 2 can be used to determine compliance with guidelines for human exposure to RF radiation. We will use equation 3 of that section for predicting RF fields. The highest power measurement for this device is 28.79 dBm. For this prediction we will use a worst-case power of 29 dBm or 800 mW. Since the device is “mobile”, we will use a worst-case distance of 20 cm. For worst-case antenna gain, we will use a gain of one. Using equation 3 of OET Bulletin 65 Section 2, the power density is calculated to be 0.08 mW/cm 2 . This is well within the limit given in 1.1310.

1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 FCC Rules and Regulations / Intentional Radiators Operational in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz, Bands Part 15, Subpart C, Section 15.247 THE FOLLOWING ''MEETS'' THE ABOVE TEST SPECIFICATION Formal Name: R110XiIII Plus Kind of Equipment: Thermal Transfer on demand bar code printer Test Configuration: RFID - Matrics (Tested at 120 vac, 60 Hz) FCC ID Number: I28RFID-R100XI01 Model Number(s): 110XiIII Model(s) Tested: 110XiIII Serial Number(s): 91C04220027 Date of Tests: June 10, 2004 Test Conducted For: Zebra Technologies Corporation 333 Corporate Woods Parkway Vernon Hills, Illinois 60061 NOTICE: “This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Additional Description of Equipment Under Test" page listed inside of this report. This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems. Page - 1 - 1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 SIGNATURE PAGE Report By: Arnom C. Rowe Test Engineer EMC-001375-NE Reviewed By: William Stumpf OATS Manager Approved By: Brian Mattson General Manager Company Official: Zebra Technologies Corporation Page - 2 - 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -3- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -4- 1250 Peterson Dr., Wheeling, IL 6009 Page -4- Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 1250 Peterson Dr., Wheeling, IL 6009 Page -5- Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -6- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -7- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -8- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -9- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -10- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -11- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 Page -12- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 10781 TABLE OF CONTENTS i. Cover Page.......................................................................................................................................1 ii. Signature Page.................................................................................................................................2 iii. NVLAP Certificate of Accreditation...............................................................................................3 iv. NVLAP Scope of Accreditation......................................................................................................4 v. Table of Contents...........................................................................................................................13 1.0 Summary o…

Text truncated - open the document above for the full version.