I28RFID-R110XI-03Thermal Transfer on Demand Bar Code Printer

Zebra ® R110Xi™/R170Xi™ High-Performance Printers User Guide © 2004 ZIH Corp. The copyrights in this manual and the label print engine described therein are owned by Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software in the label print engine may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. This product may contain ZPL ® , ZPL II ® , and ZebraLink(tm) programs; Element Energy Equalizer ® Circuit; E3 ® ; and AGFA fonts. Software © ZIH Corp. All rights reserved worldwide. ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo, ZPL, ZPL II, Element Energy Equalizer Circuit, and E3 Circuit are registered trademarks of ZIH Corp. All rights reserved worldwide. CG Triumvirate is a trademark of AGFA Monotype Corporation. All rights reserved worldwide. CG Triumvirate™ font © AGFA Monotype Corporation. Intellifont ® portion © AGFA Monotype Corporation. All rights reserved worldwide. UFST is a registered trademark of AGFA Monotype Corporation. All rights reserved worldwide. All other brand names, product names, or trademarks belong to their respective holders. Customer Order # 23063L-003 Manufacturer Part # 23063L-003 Rev. 2 I have determined that the Zebra printers identified as the manufactured by: Have been shown to comply with the applicable technical standards of the FCC If no unauthorized changed is made in the equipment, and if the equipment is properly maintained and operated. Xi Plus Xi Plus,Xi Plus,Xi Plus, Xi Plus,Xi Plus,Xi Plus IIISeries 90 III96 III110 III 140 III170 III220 III 333 Corporate Woods Parkway Vernon Hills, Illinois 60061-3109 U.S.A. For Home, Office, Commercial, and industrial use Zebra Technologies Notes • ___________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ 23063L-003 Rev. 2 12/17/04R110Xi/R170Xi User Guidev Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii 1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Panel Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Printer Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 • Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpack and Inspect the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Report Shipping Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Store or Reship the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Select a Site for the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Select a Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide Proper Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Allow Proper Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide a Data Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connect the Printer to a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Power Cord Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Select a Communication Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Data Cable Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Types of Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 viR110Xi/R170Xi User Guide12/17/04 23063L-003 Rev. 2 Contents Ribbon. . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

FCC ID: I28RFID-R110XI-03 D.L.S. ELECTRONIC SYSTEMS, INC. 1250 Peterson Drive Wheeling, Illinois 60090 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Gentlemen: We are submitting for Zebra Technologies Corporation, Inc., a R110XiIII Plus Transmitter, Model Number 110XiIII, with a FCC ID: I28RFID-R110XI-03 for Certification. This unit has been tested and complies to Part 15, Subpart C. If there are any questions in regards to this application, please call D.L.S. Electronic Systems, Inc. at (847) 537 6400. Enclosed you will find a copy of our test report with the information and results of tests that is required under Part 15, Section 15.247. Thank you for your assistance in this matter. Sincerely, Arnom C. Rowe EMC-001375-NE DLS/sr

December 6, 2004 Attn: Director of Certification Authority to Act as Agent On behalf, I appoint AmericanTCB to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with: D.L.S. Electronic Systems, Inc. 1250 Peterson Drive Wheeling, Illinois 60090 Dated this ____6th____ day of ___December__, 2004. Agency Agreement Expiration Date: June 6, 2005 By: Arnom C. Rowe (Print name) Title: EMC Test Engineer, EMC 001375-NE On behalf of: Zebra Technologies Corporation (Company Name) Telephone: 847-537-6400

Letter of Agency Date: December 2, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Zebra Technologies Corporation authorizes D.L.S. Electronic Systems, Inc. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory, Arnom C. Rowe EMC Engineer EMC-001375-NE D.L.S. Electronic Systems, Inc. FCC Labeling Requirements and Information Date: December 2, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: FCC Labeling Requirements FCC ID: I28RFID-R110XI-03 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, Arnom C. Rowe EMC Engineer EMC-001375-NE D.L.S. Electronic Systems, Inc. Request for Confidentiality Date: December 2, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-03 Please be advised that the following information is to be held confidential and behalf of Zebra Technologies Corporation: • Block Diagram • Schematics The application contains technical information, which Zebra Technologies Corporation deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC Engineer EMC-001375-NE D.L.S. Electronic Systems, Inc. Modification Letter Date: December 2, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-03 Please be advised that the following information is a list of modifications that will be included in the production process for the above-referenced equipment. Change 1: There were no modifications made during testing. Change 2: Change 3: Change 4: Change 5: Change 6: Change 7: Change 8: Change 9 Change 10: Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC Engineer EMC-001375-NE D.L.S. Electronic Systems, Inc. Manufacturer’s Letter Date: December 2, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R110XI-03 To Whom It May Concern: Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC Engineer EMC-001375-NE D.L.S. Electronic Systems, Inc.

Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer - front Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer - back Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer - left Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer - right Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer – door open – side view Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Printer – door open – front view Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Coupler\Antenna location

Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: FCC Label Location

Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Reader installed in printer Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Reader assembly installed in printer Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Reader assembly with Coupler\Antenna & cables Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Coupler\Antenna bracket assembly Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Coupler\Antenna Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Reader Assembly – side view Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: RF, Digital, Power board assembly – top view Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: RF board – top side with shield can Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Top side RF board; Inside of shield cans Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Bottom side RF board Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: RF & Digital boards, disassembled Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Digital board – top side with shield can Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Digital board – top side; Shield can - inside Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Digital board – bottom side Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Power adaptor board – top side Company: Zebra Technologies Corporation Product: R110XiIII Plus FCC ID#: I28RFID-R110XI-03 Date: 11/19/2004 Photo Description: Power adaptor board – bottom side

R110Xi Operation & Description Zebra's R110Xi can read, encode, and print on RFID smart labels. Smart labels carry embedded ultra-thin UHF RFID transponders. Transponders contain thin antennas and integrated circuits that can be read, programmed, and reprogrammed using non-contact radio waves. RFID smart labels allow for non- line of sight reading of the data contained in the IC and feature anti-collision technology, which lets you scan and identify several objects simultaneously, such as totes of supplies. In addition to standard printer components, the Zebra R110Xi printer contains a Multi- protocol UHF RFID reader, and a strip-line coupler/antenna connected to the reader via a coaxial cable. The reader powers and communicates with RFID smart labels via the coupler/antenna. The reader contains a digital processor and analog signal conditioning circuitry and is located in the electronics enclosure of the printer. The coupler/antenna is located in the print mechanism of the printer in close proximity the RFID transponder when the smart label is in the rest position prior to printing. When the printer receives instructions from a host computer system to print and encode/read a smart label, the printer sends encode/read commands to the reader via a serial communication link, and the reader responds to the printer with data read and/or a status message. The UHF RF signals generated by the reader are turned on only during a printer commanded read or encode operation. The RF signal is a frequency-hopping carrier operating between 902MHz and 928MHz. The modulation pattern is governed by the selected UHF RFID protocol. The Multi-protocol reader supports EPC Class 1, EPC Class 0, Matrics Class 0+, and ISO 18000-6B UHF RFID protocols presently, and may support more protocols in the future via firmware download upgrade. The coupler/antenna is a dual strip-line transmission line fabricated on a two-sided printed circuit board with one side acting as a ground plane. The coupler/antenna is orientated with the ground-plane side down, roughly parallel to the base of the printer. The reader’s transmitter and receiver are both connected directly to the coupler/antenna via the coaxial cable. Back scatter signals from the transponder are received via the same coupler/antenna as is used to transmit to the transponder.

RF Exposure Exhibit for Zebra I28RFID-R110XI-03 Transmitter Since the EUT only transmits when it receives a signal from the computer, normal operation during transmission would have the user sitting at the computer, not touching the printer. There are no buttons on the device to make it transmit. This means a distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure and the body of the user or nearby persons. Therefore, this device is classified under section 2.1091 as a “mobile” device. Although this device is categorically excluded from RF exposure evaluation under Part 2, it can be shown that the device meets the limits used for evaluating other devices (those which are not excluded) under this section. Section 2.1091 for mobile devices states that the limits are given in 1.1310. The limit given in 1.1310 for general population/uncontrolled at 928 MHz is a Maximum Permissible Exposure (MPE) limit of (f/1500) mW/cm 2 . For 928 MHz this limit is 0.619 mW/cm 2 . The FCC OET Bulletin 65 Section 2 can be used to determine compliance with guidelines for human exposure to RF radiation. We will use equation 3 of that section for predicting RF fields. The highest power measurement for this device is 27.23 dBm. For this prediction we will use a worst-case power of 28 dBm or 631 mW. Since the device is “mobile”, we will use a worst-case distance of 20 cm. For worst-case antenna gain, we will use a gain of one. Using equation 3 of OET Bulletin 65 Section 2, the power density is calculated to be .126 mW/cm 2 . This is well within the limit given in 1.1310.

1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 FCC Rules and Regulations / Intentional Radiators Operational in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz, Bands Part 15, Subpart C, Section 15.247 THE FOLLOWING ''MEETS'' THE ABOVE TEST SPECIFICATION Formal Name: R110XiIII Plus Kind of Equipment: Thermal Transfer on demand barcode\RFID printer Test Configuration: Multiprotocol (Tested at 120 vac, 60 Hz) Model Number(s): 110XiIII Model(s) Tested: 110XiIII Serial Number(s): 91C04430211 Date of Tests: November 17 & 18, 2004 Test Conducted For: Zebra Technologies Corporation 333 Corporate Woods Parkway Vernon Hills, Illinois 60061 NOTICE: “This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Additional Description of Equipment Under Test" page listed inside of this report. This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems. Page - 1 - 1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 SIGNATURE PAGE Report By: Arnom C. Rowe Test Engineer EMC-001375-NE Reviewed By: William Stumpf OATS Manager Approved By: Brian Mattson General Manager Company Official: Zebra Technologies Corporation Page - 2 - 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -3- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -4- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -5- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -6- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -7- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -8- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -9- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -10- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -11- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -12- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -13- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -14- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 Page -15- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 110XiIII Report Number: 11069 TABLE OF CONTENTS i. Cover Page..........................................................................................................................................1 ii. Signature Page....................................................................................................................................2 iii. NVLAP Certificate of Accreditation..............................................................................................3 iv. NVLAP Scope of Accreditation.....................................................................................................4 v. Table of Contents..............................................................................................................................16 1.0 Summary of Test Report...............................................................................................................18 2.0 Introduction...................................................................................................................................18 3.0 Object............................................................................................................................................18 4.0 Test Set-Up...................................................................................................................................19 5.0 Test Equipment.............................................................................................................................20 6.0 Ambient Measurements................................................................................................................21 7.0 Description of Test Sample...........................................................................................................22 8.0 Additional Description of Test Sample......................................................................................... 24 9.0 Photo Information and Test Set-Up..............................................................................................25 10.0 Radiated Photos Taken During Testing........................................................................................ 26 10.0 Conducted Photos Taken During Testing.....................................................................................27 11.0 Results of Tests.............................................................................................................................28 12.0 Conclusion....................................................................................................................................28 TABLE 1 – EQUIPMENT LIST..............................................................................................................29 Page -16- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra …

Text truncated - open the document above for the full version.