I28RFID-R170XI-02Thermal Transfer on Demand Bar Code Printer

Zebra RXiIIIPlus ™ Printers User Guide Copyright © ZIH Corp. The copyrights in this manual and the label printer described therein are owned by Zebra Technologies. All rights are reserved. Unauthorized reproduction of this manual or the software in the label printer may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. IBM ® is a registered trademark of IBM Corporation. Adobe ® and Acrobat ® are registered trademarks of Adobe Systems Incorporated. Zebra ® , Stripe ® , ZPL ® , ZebraNet ® , ZebraLink™, and ZPL II ® are registered trademarks of Zebra Technologies. All other brand names, product names, trademarks, and registered trademarks are property of their respective holders. Part Number: 13383L R1 R110/R170XiIIIPlus User Guide i Table of Contents Proprietary Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Printer Software and Firmware License Agreement. . . . . . . . . . . . . . . . . . . . . . xv Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxii Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi Chapter 1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Panel Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Printer Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2 • Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpack and Inspect the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Report Shipping Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Store or Reship the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Select a Site for the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Select a Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide Proper Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Allow Proper Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Provide a Data Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connect the Printer to a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Communication Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Data Cable Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ii R110/R170XiIIIPlus User Guide Table of Contents Types of Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Continuous Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Non-Continuous Black Mark Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Non-Continuous Web Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 RFID “Smart” Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Chapter 3 • Printer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Load the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Load Roll Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Load Fanfold Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Load Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Remove Used Ribbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Print a Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Calibrate the Printer …

Text truncated - open the document above for the full version.

333 Corporate Woods Parkway Vernon Hills, Illinois 60061.3109 U.S.A. Telephone +1.847.634.6700 Facsimile +1.847.821.1795 www.zebra.com AUTHORIZATION FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Ladies and or Gentlemen: I appoint Brian J. Mattson or Arnom C. Rowe to act as agent in the preparation of applications under Part 15 of the Rules and Regulations of the Federal Communications Commission. I certify that the exhibits properly describe the device being submitted under this application and will implement any changes described in the test report. The following statement is required by the Federal Communications Commission: By checking yes, the applicant certifies that, in the case of an individual applicant, he or she is not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a), or, in the case of an non-individual applicant (e.g. corporation, partnership or other unincorporated association), no party to the application is subject to a denial of federal benefits, that includes FCC benefits, pursuant to that section. __X___ YES _____ NO Dated this 26 th day of May 2004 Agency agreement expiration date: None By Mr. Charles A. Derrow Signature Printed Title Manager, Compliance Engineering Telephone 847.793.5719 Applicant Zebra Technologies Corporation

FCC ID: I28RFID-170XI-02 D.L.S. ELECTRONIC SYSTEMS, INC. 1250 Peterson Drive Wheeling, Illinois 60090 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Gentlemen: We are submitting for Zebra Technologies Corporation, Inc., a Thermal Transfer R170XiIII Transmitter, Model Number 170XiIII, with a FCC ID: I28RFID-170XI-02 for Certification. This unit has been tested and complies to Part 15, Subpart C. If there are any questions in regards to this application, please call D.L.S. Electronic Systems, Inc. at (847) 537 6400. Enclosed you will find a copy of our test report with the information and results of tests that is required under Part 15, Section 15.247. Thank you for your assistance in this matter. Sincerely, Arnom C. Rowe EMC-001375-NE DLS/mm

Letter of Agency Date: May 26, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Zebra Technologies Corporation authorizes D.L.S. Electronic Systems, Inc. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. FCC Labeling Requirements and Information Date: May 26, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: FCC Labeling Requirements FCC ID: I28RFID-R170XI-02 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Request for Confidentiality Date: May 26, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R170XI-02 Please be advised that the following information is to be held confidential and behalf of APPLICANT NAME: • Block Diagram • Schematics • Parts Lists The application contains technical information which Zebra Technologies Corporation deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Modification Letter Date: May 26, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R170XI-02 Please be advised that the following information is a list of modifications that will be included in the production process for the above-referenced equipment. Change 1: There were no modifications made during testing. Change 2: Change 3: Change 4: Change 5: Change 6: Change 7: Change 8: Change 9 Change 10: Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Manufacturer’s Letter Date: May 26, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: I28RFID-R170XI-02 To Whom It May Concern: Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc.

FCC ID: I28RFID-R170XI-02 LIST OF CRYSTAL FREQUENCIES The following is a list of crystal frequencies used in the Zebra Transmitter Model No: 170XiIII 133 MHz, 66 MHz, 40 MHz, 33 MHz, 32 MHz, 25 MHz, 16 MHz, 8 MHz, & 3.6469 MHz

Alien Frequency Hopping Sequence 915 MHz Channel Hopping Table: 32 59 22 2514501636 0 34 39 33 2 5119423718 58 46 43 5 45 175421354 57 27 20 15 28 5229621112 41 53 40 26 48 449566131 47 10 23 8 49 553012460 6 7 38 13 3

Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Front of EuT Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Left Side of EuT Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Back Side of EuT and FCC ID Label Location Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Right Side of EuT

Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Back Side of EuT and FCC ID Label Location

Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Right Side of EuT Door Open Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Front Side of EuT Door Open Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Transmit Antenna Placement Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Transmit Antenna Placement Close-up Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Left Side of EuT, Cover Removed Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Reader Board Assembly Placement in EuT Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Side #1 of Reader Board Assembly and Side #1 of Antenna Assembly Connected Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Side #1 of Antenna Connected with Antenna Cover Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Side #2 of Antenna Disconnected w/o Antenna Cover Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Reader Board Module Removed from Filter Board Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Side #2 of Reader Module Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Inside Covers of Reader Module Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Back Side of Reader Board Company: Zebra Technologies Product: 170XiIII FCC ID#: I28RFID-R170XI-02 Date: 5/3/2004 Photo Description: Component Side of Reader Board

Description

RF Exposure Exhibit for Zebra I28RFID-170XI-02 Printer Since the EUT only transmits when it receives a signal from the computer, normal operation during transmission would have the user sitting at the computer, not touching the printer. There are no buttons on the device to make it transmit. This means a distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure and the body of the user or nearby persons. Therefore, this device is classified under section 2.1091 as a “mobile” device. Although this device is categorically excluded from RF exposure evaluation under Part 2, it can be shown that the device meets the limits used for evaluating other devices (those which are not excluded) under this section. Section 2.1091 for mobile devices states that the limits are given in 1.1310. The limit given in 1.1310 for general population at 902 MHz is a Maximum Permissible Exposure (MPE) limit of (f/1500) mW/cm 2 . For 902 MHz this limit is 0.601 mW/cm 2 . The FCC OET Bulletin 65 Section 2 can be used to determine compliance with guidelines for human exposure to RF radiation. We will use equation 3 of that section for predicting RF fields. The highest power measurement for this device is 25.81 dBm. For this prediction we will use a worst-case power of 26 dBm or 400 mW. Since the device is “mobile”, we will use a worst-case distance of 20 cm. For worst-case antenna gain, we will use a gain of one. Using equation 3 of OET Bulletin 65 Section 2, the power density is calculated to be 0.08 mW/cm 2 . This is well within the limit given in 1.1310.

1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 FCC Rules and Regulations / Intentional Radiators Operational in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz, Bands Part 15, Subpart C, Section 15.247 THE FOLLOWING ''MEETS'' THE ABOVE TEST SPECIFICATION Formal Name: Zebra R170XiIII Bar Code Printer Kind of Equipment: Thermal Transfer on Demand Bar Code Printer Test Configuration: Alien EPC Class 1 RFID Printer (Tested at 120 vac, 60 Hz) Model Number(s): 170XiIII Model(s) Tested: 170XiIII Serial Number(s): 7067524 Date of Tests: May 3, 2004 Test Conducted For: Zebra Technologies Corporation 333 Corporate Woods Parkway Vernon Hills, Illinois 60061 NOTICE: “This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Additional Description of Equipment Under Test" page listed inside of this report. This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems. Page - 1 - 1250 Peterson Dr., Wheeling, IL 60090 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 SIGNATURE PAGE Report By: Arnom C. Rowe Test Engineer EMC-001375-NE Reviewed By: William Stumpf OATS Manager Approved By: Brian Mattson General Manager Company Official: Zebra Technologies Corporation Page - 2 - 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -3- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -4- 1250 Peterson Dr., Wheeling, IL 6009 Page -4- Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 1250 Peterson Dr., Wheeling, IL 6009 Page -5- Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -6- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -7- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -8- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -9- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -10- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -11- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 Page -12- 1250 Peterson Dr., Wheeling, IL 6009 Company: Zebra Technologies Corporation Model Tested: 170XiIII Report Number: 10705 TABLE OF CONTENTS i. Cover Page.......................................................................................................................................1 ii. Signature Page.................................................................................................................................2 iii. NVLAP Certificate of Accreditation...............................................................................................3 iv. NVLAP Scope of Accreditation......................................................................................................4 v. Table of Contents...........................................................................................................................13 1.0 Summary of Test Report................................................................................................................14 2.0 Introduction....................................................................................................................................14 3.0 Object.............................................................................................................................................14 4.0 Test Set-Up....................................................................................................................................15 5.0 Test Equipment..............................................................................................................................16 6.0 Ambient Measurements.................................................................................................................17 7.0 Description of Test Sample............................................................................................................18 8.0 Additional Description of Test Sample..........................................................................................21 9.0 Photo Information and Test Set-Up...............................................................................................22 10.0 Radiated Photos Taken During Testing.........................................................................................23 11.0 Results of Tests..............................................................................................................................25 12.0 Conclusion.....................................................................................................................................25 TABLE 1 – EQUIPMENT LIST...............................................................................................................26 Appendix A – Electric Field Radiated Emissions Test..............................................................................28 1.0 Conducted Emission Measurements..............................................................................................29 1.0 Conducted Data and Graph(s) taken during testing.......................................................................30 2.0 Spurious Emissions at the Antenna Termina…

Text truncated - open the document above for the full version.

Radiated Emissions (Front View) Radiated Emissions (Rear View) AC Power Line Conducted Antenna Direct Connect Antenna Direct Connect