INGSIEM-121TIn-Ear Monitoring System

No. 148, 9th Industry Road, Ta-Li Industrial Park, Taichung City 41280, Taiwan. Tel: 886-4-24938803 Fax: 886-4-24914890 E-mail: [email protected] www.jts.com.tw 59508 -137- 02 PROFESSIONAL CO., LTD. Instruction Manual / 操作手冊 SIEM-121T/SIEM-121R UHF PLL Stereo In-Ear Monitoring System M O N I TO R S E T U P P U S H / C O N T R O L P O W E R R F O N /O F F SIEM -121 T TRANSMI TTER E X I T / The guideline published by Occupational Safety Health Administration (OSHA) in United States indicates overload volume level for prolonged listening may harm your hearing. Here below are referenced data on maximum time exposure to sound level before hearing injury occurs. Please pay high attention to the following information. ATTENTION Sound Level (dB)Duration per day (hrs) 908 926 954 973 1002 1021.5 1051 1100.5 1150.25 140Avoid or injury may occur  The UHF PLL Miniature Headworn Wireless Transmitter model HW-2 complies with the following requirements: FCC (Federal Communications Commission) Part 74. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID can be found inside the battery compartment. 1.Features 1 2.Specification 2 2-1 UHF PLL Single Channel Transmitter // SIEM-121T 2 2-2 UHF PLL Body-Pack Receiver // SIEM-121R 2 3.Parts Identification 3 3-1 UHF PLL Single Channel Transmitter // SIEM-121T 3 3-2 UHF PLL Body-Pack Receiver // SIEM-121R 5 3-3 Accessories 6 4.Connection 6 4-1 Connecting the SIEM-121T 6 4-2 Installing the SIEM-121R 7 4-3 Optional Accessory 8 5. Operation 9 5-1 Operation // SIEM-121T 9 5-2 Operation // SIEM-121R 11 6. Installation Assignment 14 6-1 Basic Operation 14 6-2 Loop Out Application 15 7. Recommendations 15 Thank you for choosing the JTS in ear monitoring system. In order to obtain the best efficiency fromthe system, you are recommended to take few minutes to read this instruction manual carefully. Table of Content ENGLISH 1 1.Features SIEM-121T » Your ultimate solution to affiliate the problems of interference and dropouts. » Designed with JTS exclusive 2.4GHz REMOSET technology, making data synchronization as simple as a one-button-touch to enable quick setup and easy operation. » Reliable wireless coverage that extends up to 300 meters. » Digital Volume control/adjustment at -40 to +20dB. » 6 programmable groups, each up to 24 channels. » Username programmable. » Rugged, all-metal construction for lasting durability. » Complete the system with our compact-sized SIEM-121R body-pack receiver. SIEM-121R » The SIEM-121R is a wireless stereo body-pack receiver for use with the SIEM-121 monitoring system. » Allow you to shape the sound of your monitor mix with stereo & mono, HF booster and volume limiting. » Adjustable volume limiter sets the maximum level range for the volume knob. » Enables adjustment of left/right balance. » Updated high-contrast LCD screen optimizes user visibility. » Compact design (lighter and thinner) optimizes your wearing experience. » Up to 6-hours continuous use from 2 x AA batteries keep you going all night. » Complete the system with our compact-sized SIEM-121T wireless transmitter. ENGLISH 2 2.Specification 2-1 UHF PLL Single Channel Transmitter // SIEM-121T Carrier Frequency Range470~960 MHz RF Output Power10 mW Nominal Frequency Deviation ±40KHz (MAX) Audio Input Impedance20kΩ Nominal Input Level-12 dBu Maximum Input LevelAUX:12dBu, LINE:22 dBu LCD Display Key lock, Stereo/Mono, RF power, User Name, Group/Channel, Frequency, Input Selection, Sensitivity, Remoset ID Audio input Connector2 x Balanced XLR / Ø6.3mm phone Combo Socket Audio Output Connector1 x 6.3mm Stereo Phone Jack Loop Out Connector2 x 6.3mm Balanced Loop Out Socket Switching Power Supply100-240V Dimensions210mm(W)*42mm(D)*225mm(H) Weight1140g 2-2 UHF PLL Body-Pack Receiver // SIEM-121R Carrier Frequency Range470~960 MHz Earphone Output.60 mW Minimum Load Impedance16Ω LCD Display Antenna , R F, AF Level, User Name, Key lock, Battery Fuel Gauge, Stereo/Mono, HF booster, Limiter, Group/Channel, Remoset ID, Frequency Output Connector3.5mm Stereo Phone Jack Battery2*AA batteries or 2*MiNH rechargeable battery Operation Hour.Over 8 hours Dimensions65mm(W)*20mm(D)*95mm(H) Weight130g(without batteries) ENGLISH 3 3.Parts Identification 3-1-1 Front Panel 1 Antenna 2 REMOSET : When the setting is done on the transmitter, push REMOSET to transmit the settings to the receiver . 3 Volume Control 4 6.3mm Stereo Phone Jack 5 EXIT/Lock Button: When the “Setup Menu” is displayed, you can press the EXIT Button to cancel the selection of any item or exit the menu. When the Setup Menu is not displayed, press and hold the EXIT Button for 3 seconds to lock/unlock the buttons. You can press the EXIT button to cancel the pairing when the device is in the process of pairing. 6 Knob: When in the “Function Setting Menu,” the Knob allows the selection of the desired functions up and down; push the rotary switch (or the SETUP) to enter the selection, rotate the Knob to select the desired setting and push SETUP to save it. 7 RF Power Switch 8 Power Switch 9 LCD Display 10 SETUP: Push and hold for 2 seconds to enter the “Setting Menu;” when the selection and setting is done with[ 6.Knob ], push SETUP to save the setting. 3-1 UHF PLL Single Channel Transmitter // SIEM-121T MONITOR SETUP PUSH/CONTROL POWERRF ON/OFF SIEM-121T TRANSMITTER EXIT / 109 1 2 345678 ENGLISH 4 3-1-2 Rear Panel 1 AC Power Socket and Fuse 2 DC power socket: for 12V/1A DC power supply 3 Balanced Loop Out Connector CH.1 4 Balanced Loop Out Connector CH.2 5 Balanced XLR/ φ 6.3mm Combo Input Left / CH.1 6 Balanced XLR/ φ 6.3mm Combo Input Right / CH.2 7 BNC Antenna Output Socket 3-1-3 LCD Display 1 Key lock status 2 Stereo…

Text truncated - open the document above for the full version.

Report No.: 2408TWU101-UE 1 of 8 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2408TWU101-UE 2 of 8 (3) EUT Photo (4) EUT Photo Report No.: 2408TWU101-UE 3 of 8 (5) EUT Photo (6) EUT Photo Report No.: 2408TWU101-UE 4 of 8 (7) EUT Photo (8) EUT Photo Report No.: 2408TWU101-UE 5 of 8 (9) EUT Photo (10) EUT Photo Report No.: 2408TWU101-UE 6 of 8 (11) EUT Photo (12) EUT Photo Report No.: 2408TWU101-UE 7 of 8 (13) EUT Photo (14) EUT Photo Report No.: 2408TWU101-UE 8 of 8 (15) EUT Photo (16) EUT Photo

Label Label location

Report No.: 2408TWU101-UI 1 of 8 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 2408TWU101-UI 2 of 8 (3) EUT Photo (4) EUT Photo Report No.: 2408TWU101-UI 3 of 8 (5) EUT Photo (6) EUT Photo Report No.: 2408TWU101-UI 4 of 8 (7) EUT Photo (8) EUT Photo Report No.: 2408TWU101-UI 5 of 8 (9) EUT Photo (10) EUT Photo Report No.: 2408TWU101-UI 6 of 8 (11) EUT Photo (12) EUT Photo Report No.: 2408TWU101-UI 7 of 8 (13) EUT Photo (14) EUT Photo Report No.: 2408TWU101-UI 8 of 8 (15) EUT Photo (16) EUT Photo

MRT Technology (Taiwan) Co., Ltd Report No.: 2408TWU101-U4 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2024-11-20 Web: www.mrt-cert.com Page Number: 1 of 6 Maximum Permissible Exposure FCC ID: INGSIEM-121T APPLICANT: JTS PROFESSIONAL CO., LTD. Application Type: Certification Product: In-Ear Monitoring System Model No.: SIEM-121T Brand Name: JTS FCC Rule Part(s): Part 2.1091 (Mobile) Received Date: August 30, 2024 Tested By : ( Fran Chen ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2408TWU101-U4 Page Number: 2 of 6 Revision History Report No. Version Description Issue Date 2408TWU101-U4 1.0 Original Report 2024-11-20 Report No.: 2408TWU101-U4 Page Number: 3 of 6 1. PRODUCT INFORMATION 1.1. Equipment Description Product Name In-Ear Monitoring System Model No. SIEM-121T Brand Name JTS Operating Frequency SRD 2.4GHz: 2412.05 ~ 2424.05MHz UHF: 470MHz ~ 608MHz Modulation SRD 2.4GHz: FSK UHF: FM Report No.: 2408TWU101-U4 Page Number: 4 of 6 1.2. Antenna Description SRD 2.4GHz Antenna Type Chip Antenna Antenna M/N AT3216-B2R7HAA Antenna Gain 0.5dBi UHF Antenna Type Dipole Antenna Antenna M/N AN0500-13M01BBN, AN0570-13M01BBN Antenna Gain 0.8dBi, 1.50dBi Report No.: 2408TWU101-U4 Page Number: 5 of 6 2. MAXIMUM PERMISSIBLE EXPOSURE (MPE) 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 0.3-1.4 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/1500 30 1500-100,000 -- -- 1.0 30 Note : (1) f= Frequency in MHz , (2) * = Plane-wave equivalent power density Calculation Formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 r = distance between observation point and center of the radiator in cm Under normal use condition, is at least 20cm away from the body of the user . So, this device is classified as Mobile Device. Report No.: 2408TWU101-U4 Page Number: 6 of 6 2.2. Test Result Mode Frequency (MHz) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) SRD 2.4G 2412.05~2424.05 -6.48 20 0.000045 1 UHF 470~608 6.94 20 0.000983 0.3133 Note: dBm = dBuV/m@3m – 95.23. Conclusion : CPD1/LPD1 + CPD2/LPD2 + ... + CPDN/LPDN ≦ 1 CPD : Calculation Power Density LPD : Limit of Power Density Mode Power Density Limit Conclusion Result (≦ 1 ) SRD 2.4G 0.000045 1 0.003183 Pass UHF 0.000983 0.3133 So, device can comply with FCC radiation exposure requirement specified in the FCC Rule 2.1091. The End

Pro Pro oduct Num oduct Nam Cus D Co Cu INVAX Sy 4F. No. 815 Taipei, TAIW TEL:886-2-2 http://www.i mber: AN05 me: Antenn Spe Custom stomer P/ INVAX P Descriptio ortec Che ustomer A ystem Te 5.Chung Hsi WAN 2788-5218 F nvaxsystem. 570-13M01 na ecific mer： 得 /N： / /N： AN on : An ecked By Approved echnology ao East Rd. FAX:886-2-27 .com 1BBN catio 得琦電子股 N0570-13 ntenna : d By: y Corp. ,Sec.5 783-1658 Page 1 on Fo 股份有限公 3M01BBN Cor Xian Cha Pro TEL http or Ap D File N Versi 公司 N rtec Tech n-Xi Industri ang-An Town ovince, China L:86-769-853 p://www.corte ppro ate: 2024 No.: 2411 on: 1.3 hnology In al, Sha-Tou n, Dong-Gua a 388261 FA ec.com.cn oval 4 / 11 / 08 108006 nc. Administrat an City, Guan AX:86-769-85 tion Zone, ngdong 5317869 Pro Pro 1 2 3 4 5 6 7 oduct Num oduct Nam Index: 1. Revisi 2. Specif 3. Charac 4. Antenn 5. Antenn 6. Mecha 7. Materia mber: AN05 me: Antenn ion Histo fication / cteristics na - S Pa na - Radi anical an al Descr 570-13M01 na ory / Pag / Page 4 s and Re arameter iation Pa d Packin iption an 1BBN e 3 eliability Test Da t attern Tes ng Drawi nd RoHS Page 2 Test / Pa ta / Page st Data / ng / Pag S Test Re age 5 e 6 Page 7 e 8 ~ 9 port / P a age 10 ~ end Pro Pro 1. R R oduct Num oduct Nam Revision Revision 1.0 1.1 1.2 1.3 mber: AN05 me: Antenn History Date 2014.05.0 2017.05.0 2018.06.1 2022.07.0 2024.11.0 570-13M01 na Chang 8 9 2 7 8 1BBN ge Notifica 初版 變更印字 修正資料 更新材質 增加增益值 Page 3 ation 值 印字內容由 BN 連接頭 Descri 由533~608MH NC接頭材質 頭連接筒材質 规格页增加 ption Hz改為530 質改為鋅合金 質由ABS改為 加增益值 0~608MHz 金 為PC Pro Pro 2.S S A F V P P I B M M C C C O S A oduct Num oduct Nam Specifica Sample Ph A. Electric Frequency V.S.W.R. Peak Gain Polarizatio Impedanc B. Materia Material o Material o Cable Typ Connecto C. Environ Operation Storage Te Antenna C mber: AN05 me: Antenn tion hoto cal Charac y n on ce al & Mecha f Radiator f Plastic pe r Type nmental n Temperat emperatur Color Stor 570-13M01 na cteristics anical Cha r ture re rage life 1BBN 533~608 <= 2.0 @ 1.5 dBi Linear 50 Ohm aracteristi CU TPEE & RG-316U BNC Plu - 40 ̊C ~ - 40 ̊C ~ < 2 year Page 4 8 MHz @ 570 MHz cs ABS U ug ~ + 65 ̊C ~ + 80 ̊C r 此 z 面印白色字字体，印字字内容：5300~608MHz Pro Pro 3. C C1 C2 M1 M2 M3 M4 M5 M6 E1 E2 E3 E4 R1 R2 R3 oduct Num oduct Nam Character Test Item 1 S.W.R. 2 Antenna Gain 1 Vibratio 2 Random Drop 3 Solderab 4 Termina Pull Tes 5 Termina Torque T 6 Dimensi Salt Spr 2 Humidity 3 Thermal Shock 4 Life (Hig Temp.) 1 RoHS 2 PFOS 3 PFOA mber: AN05 me: Antenn ristics an ms Set D calib a Set D calib n GB / Amp 3 dir m GB / Heig 3 dir bility GB 2 Sold al- t Hold to ax al- Test Hol d cloc term ion Insp surfa ray GB / Tem Tim e y GB / Tem Tim e l GB / 1 Cy Cycl gh GB / Tem With With With 570-13M01 na nd Reliab Test C DUT on Netw bration to te DUT on Ant bration to te / T2423 . 48- plitude: 0.03 rections; 2 h / T2423.8-19 ght: 1.0 Mete rections; 1 t 2423 . 28- 82 der iron: 260 ding with ind xis of termin ding with ind ckwise and c minal pection of di ace process / T 2423 . 17 p: 35°C; RH e: 24 hours / T 2423 . 4 - p: 80°C / 12 e: 24 hours / T 2423 . 22 ycle: - 40°C ( les: 24 /T 2423 . 2 - p: 80°C; Ti m h Reference h Reference h Reference 1BBN bility Tes Condition a work Analyz est enna Cham est -1997 3 inch (1.5m hours for ea 995 er; time for eac 2 0±5°C; Durat dividual spe nal dividual spe countercloc mension, co s 7- 93 H: >= 95%; N - 93 2 H; -40°C / 1 2 - 87 (30 minutes 89 me: 24 hours to IEC 6232 to USA EPA to USA EPA Page 5 st and Proce zer; make in ber; make in m); Freq: 20 ach direction h direction tion: 5 seco ecification; f ecification; a ckwise to the olor, materia NaCl solution 12H RH: >= 9 s) to + 80°C ( s 21:2008 with A 3540C:199 A 3540C:199 edure ndividual ndividual 0 to 80 to 20 n onds force applie applied e axis of al, package, n: >= 5%; 90%; (30 minutes h flow chart 96 by LC/MS 96 by LC/MS Direct Direct 0 Hz 1. No V 2. Freq 1. No 2. Fre q 1. Mou 2. No V ed 1. Dire 2. Freq 1. Dire 2. Freq , Direct After 2 1. No V 2. Freq After 2 1. No V 2. Freq s) After 2 1. No V 2. Freq After 2 1. No V 2. Freq Direct S Direct S Direct Requirem tive DUT spe tive DUT spe Visual Dam quency Tol. parts separ quency Tol. unted on PC Visual Dam ective DUT s quency Tol. ective DUT s quency Tol. tive DUT spe 2 Hours Rec Visual Dam quency Tol. 2 Hours Rec Visual Dam quency Tol. 2 Hours Rec Visual Dam quency Tol. 2 Hours Rec Visual Dam quency Tol. tive RoHS 2 tive RoHS 2 tive RoHS 2 ments ecification ecification age <= 5% rated <= 5% CB age specificatio <= 5% specificatio <= 5% ecification covery age <= 5% covery age <= 5% covery age <= 5% covery age <= 5% 011/65/EU 006/122/EC 006/122/EC n n Pro Pro 4. A oduct Num oduct Nam Antenna - mber: AN05 me: Antenn - S Param 570-13M01 na meter Te 1BBN est Data Page 6 Pro Pro 5. A oduct Num oduct Nam Antenna - 530 mber: AN05 me: Antenn - Radiati 0 MHz 570-13M01 na on Patte 1BBN ern Test D Page 7 Data 570 MHz608 MMHz B C D A PPROVER DATE S IGN DE SCRIPTION SCALE: AP P BY Tolerance X.XXX.XX° TIT LE: PART NO.: CUSTOMER P/N: C HK BY DES BY C ortec Technology Inc. Tel :886-2-27885218 Http://www.invaxsystem.com Fax:886-2-27831658 E-mail:[email protected] R F BY U NITS: mm REVISION: 5 30~608MHz ANTENNA AN0570-13M01BBN Note : 1. Dimension: Take * is the important dimension 2. Tolerance: Unmarked tolerance refer to the standard tolerance please 1 /1 D / P art Number Q't y 3 Finished 1 D escription NO. 2 Ma terial 天線帽 1 连接头 B ODY-AN13M-01B 1 Black ABS 1 連接筒 H INGE-AN13M-01B-PC PC 4 56 1 本體 B ODY1-AN13M-02B-570 PC 2 1 Black R-AB87-02 Black Black 定位柱 R VT-AN13M-01BC CU Black Cr Plated BNC PLUG BNC062-CC8MNAN13M-C Zn-AlloyTPEE 電著黑色 60 530~6 08MHz 2 017.05.09 變更印字內容為 5 30~608MHz wangwei wangwei 2 018/06/08 修正資料，接頭材質改為鋅合金 JF 2 022/07/05 变更连接筒连接头材质为 pc DD 一.將產品裝入小 PE袋 ， 三.裝箱。 隔板( P /N: R-FL-3323) 共 6 PCS MADE IN CHINA C/NO ITE M NO: ### Q TY: ### PCS N W: ### KGS G W: ### KGS MEAS ##### 四. 封箱 規格 : 38.0x26x33cm (PN:R-OTT-C-382633) 250PCS/ 箱 二.入PE袋。 1 PCS /袋 2 5PCS/ 袋 R- PE-BAG-380460 AN0570-13M01BBN AP 天線 C ALL 2 022/0…

Text truncated - open the document above for the full version.

Product Number: AN0500-13M01BBN Product Name: Antenna Page 1 Specification For Approval Date: 2022 / 07 / 07 File No.: 220707001 Version: 1.4 Customer： 得琦電子股份有限公司 Customer P/N： / INVAX P/N： AN0500-13M01BBN Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-769-85388261 FAX:86-769-85317869 http://www.invaxsystem.comhttp://www.cortec.com.cn Product Number: AN0500-13M01BBN Product Name: Antenna Page 2 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 3. Antenna - S Parameter Test Data / Page 6 4. Antenna - Radiation Pattern Test Data / Page 7 5. Mechanical and Packing Drawing / Page 8 ~ 9 6. Material Description and RoHS Test Report / Page 10 ~ end Product Number: AN0500-13M01BBN Product Name: Antenna Page 3 1. Revision History Revision Date Change NotificationDescription 1.0 2017.08.04 初版 1.1 2018.06.08 修正資料 BNC接頭材質改為鋅合金 1.2 2018.08.09 增加印字 天線連接筒增加頻段(470~530MHz) 印字 1.3 2020.01.18 增加數據 增加增益測試數據 1.4 2022.07.07 更新材質 連接頭連接筒材質由ABS改為PC Product Number: AN0500-13M01BBN Product Name: Antenna Page 4 2. Specification Sample Photo A. Electrical Characteristics Frequency 470 ~ 530 MHz V.S.W.R. <= 2.0 @ 500 MHz Peak Gain 0.8 dBi Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator CU Material of Plastic TPEE / ABS Cable Type RG-316U Connector Type BNC PLUG C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C 白色印字470~530MHz Product Number: AN0500-13M01BBN Product Name: Antenna Page 5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN0500-13M01BBN Product Name: Antenna Page 6 4. Antenna - S Parameter Test Data Product Number: AN0500-13M01BBN Product Name: Antenna Page 7 5. Antenna - Radiation Pattern Test Data 470MHz 500MHz 530MHz B C D A PPROVER DATE S IGN DE SCRIPTION SCALE: AP P BY Tolerance X.XXX.XX° TIT LE: PART NO.: CUSTOMER P/N: C HK BY DES BY C ortec Technology Inc. Tel :886-2-27885218 Http://www.invaxsystem.com Fax:886-2-27831658 E-mail:[email protected] R F BY U NITS: mm REVISION: 4 70~530MHz ANTENNA AN0500-13M01BBN Note : 1. Dimension: Take * is the important dimension 2. Tolerance: Unmarked tolerance refer to the standard tolerance please 1 /1 D / P art Number Q't y 3 Finished 1 D escription NO. 2 Ma terial 天線帽 1 连接头 B ODY-AN13M-01B 1 Black ABS 1 連接筒 H INGE-AN13M-01B-PC PC 4 56 1 本體 B ODY1-AN13M-02B-500 PC 2 1 Black R-AB87-02 Black Black 定位柱 R VT-AN13M-01BC CU Black Cr Plated BNC PLUG BNC062-CC8MNAN13M-C Zn-AlloyTPEE 電著黑色 WANGWEI 2 018/06/08 修正資料，接頭材質改為鋅合金 53 470~ 530MHz XRS 2 018/08/09 天線連接筒加印頻段印字 C C 2 022/07/05 变更连接筒连接頭材质为 PC JF D D 一.將產品裝入小 PE袋 ， 三.裝箱。 隔板( P /N: R-FL-3323) 共 6 PCS MADE IN CHINA C/NO ITE M NO: ### Q TY: ### PCS N W: ### KGS G W: ### KGS MEAS ##### 四. 封箱 規格 : 38.0x26x33cm (PN:R-OTT-C-382633) 250PCS/ 箱 二.入PE袋。 1 PCS /袋 2 5PCS/ 袋 R- PE-BAG-380460 AN0500-13M01BBN AP 天線 C ALL 2 022/08/05 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs DBP BBP DIBP DEHP 1 R-AB87-02 天線帽 ABS N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANML2204785512 2022.03.30 HP171 NP. SGS O 1 13 01 30 連接頭 測試報告裡 RoHS2.0 對應物質測試結果 物料中 HSF 對象物質含量調查表 COR/F-G-47b 測試日期 物料型號 物料各構成 名稱 測試機構 名稱 序號 康捷電子有限公司 物料名稱：AN0500-13M01BBN 測試名稱 檢測報告編號 各構成物料的材質 2 BODY1-AN13M-01B-530 HINGE-AN13M-01B-PC 連接頭连接筒 PC N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. 242129932-02 2022.01.11 E-2000XX, E-2001XX TuvRheinland 3 BODY-AN13M-01B Body TPEE N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANEC2216302802 2022.08.03 TPEE SGS 4 RVT-AN13M-01BC 定位柱 铜 22 28719 N.D. N.D. CANML2210125003 2022.05.30 黄铜棒 C3604 SGS 5 TUBE-AN13M-1294CM 銅管 銅 N.D. 40 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANEC2220161101 2022.09.23 Appy to H65(C2680,C2700 ) SGS 6 BNC062-CC8MNAN13M B…

Text truncated - open the document above for the full version.

MRT Technology (Taiwan) Co., Ltd Report No.: 2408TWU101-U3 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2024-11-20 Web: www.mrt-cert.com 1 of 61 RF MEASUREMENT REPORT FCC ID: INGSIEM-121T Applicant: JTS PROFESSIONAL CO., LTD. Application Type: Certification Product: In-Ear Monitoring System Model No.: SIEM-121T Brand Name: JTS FCC Classification: Part 15 Wireless Microphone (DWM) FCC Rule Part(s): Part 15 Subpart C (Section 15.236) Test Procedure(s): ANSI C63.10-2013 Received Date: August 30, 2024 Test Date: October 24 ~ November 14, 2024 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Tested By : ( Kaunaz Lee ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) Report No.: 2408TWU101-U3 Page Number: 2 of 61 Revision History Report No. Version Description Issue Date Note 2408TWU101-U3 1.0 Original Report 2024-11-20 Report No.: 2408TWU101-U3 Page Number: 3 of 61 CONTENTS Description Page CONTENTS ....................................................................................................................................................... 3 1. General Information ................................................................................................................................ 5 2. INTRODUCTION....................................................................................................................................... 6 2.1. Scope ........................................................................................................................................... 6 2.2. MRT Test Location ....................................................................................................................... 6 3. PRODUCT INFORMATION ...................................................................................................................... 7 3.1 Product Information .......................................................................................................................... 7 3.2 Radio Specification under Test ......................................................................................................... 7 3.3 Working Frequencies ....................................................................................................................... 7 4. Test Configuration .................................................................................................................................. 8 4.1. Test Mode .................................................................................................................................... 8 4.2. Test Software ............................................................................................................................... 8 4.3. Applied Standards ........................................................................................................................ 8 4.4. Test Environment Condition ......................................................................................................... 8 5. Measuring Instrument ............................................................................................................................ 9 6. Decision Rules and Measurement Uncertainty .................................................................................. 10 6.1. Decision Rules ........................................................................................................................... 10 6.2. Measurement Uncertainty .......................................................................................................... 10 7. Test Result .............................................................................................................................................. 11 7.1. Summary ..................................................................................................................................... 11 7.2. 99% Occupied Bandwidth Measurement ................................................................................... 12 7.2.1. Test Limit .................................................................................................................................... 12 7.2.2. Test Procedure ........................................................................................................................... 12 7.2.3. Test Setting ................................................................................................................................ 12 7.2.4. Test Setup .................................................................................................................................. 12 7.2.5. Test Result ................................................................................................................................. 13 7.3. Frequency Tolerance Measurement .......................................................................................... 14 7.3.1. Test Limit .................................................................................................................................... 14 7.3.2. Test Procedure ........................................................................................................................... 14 7.3.3. Test Setting ................................................................................................................................ 14 7.3.4. Test Setup .................................................................................................................................. 15 7.3.5. Test Result ................................................................................................................................. 16 7.4. Necessa…

Text truncated - open the document above for the full version.

Report No.: 2408TWU101-UT 1 of 5 SRD Test Photograph Description: Front View of Conducted Emission Test Setup Description: Back View of Conducted Emission Test Setup Report No.: 2408TWU101-UT 2 of 5 Description: Radiated Emission Test Setup for below 1GHz Description: Radiated Emission Test Setup for above 1GHz Report No.: 2408TWU101-UT 3 of 5 UHF Test Photograph Description: Front View of Conducted Emission Test Setup Description: Back View of Conducted Emission Test Setup Report No.: 2408TWU101-UT 4 of 5 Description: Radiated Emission Test Setup for below 1GHz Description: Radiated Emission Test Setup for above 1GHz Report No.: 2408TWU101-UT 5 of 5 Description: Conducted Emission Test Setup