JF6-8705U-52Digital Modulated Radio

MDR-8000/i/s/u Alcatel Part Number 3EM15726AA 3400 West Plano Parkway Plano, Texas 75075-5813 U.S.A. Part 1 of 2 Issue 2, June, 2004 Microwave Digital Radios Users Manual Table of Contents TOC-i Page Section 1General 1.1 INTRODUCTION ............................................................................................. 1-1 1.2 CONTENT ....................................................................................................... 1-1 Section 2Operation 2.1 GENERAL ........................................................................................................ 2-1 2.2 TURN-ON ........................................................................................................ 2-1 2.3 USER SYSTEM INTERFACE (USI) PROVISIONING FUNCTION/OPERATION ...... 2-2 2.4 OPERATING PROCEDURES .............................................................................. 2-2 2.4.1 Radio Receiver Manual Switching ..................................................................... 2-2 2.4.2 Radio Transmitter Manual Switching ................................................................. 2-5 2.4.3 Radio I/O Interface Manual Switching .............................................................. 2-5 2.4.4 MCS-11 Operation .......................................................................................... 2-7 2.4.5 Lamp Tests ....................................................................................................... 2-8 2.4.6 Alarm Checks .................................................................................................. 2-8 2.4.7 Orderwire Operation ....................................................................................... 2-8 2.4.8 Initiating Outgoing Orderwire Calls .................................................................. 2-8 2.4.9 Answering Incoming Orderwire Calls ................................................................ 2-8 2.5 TURN-OFF PROCEDURE ................................................................................... 2-9 2.6 EMERGENCY OPERATION .............................................................................. 2-9 2.7 MODEM OPERATION ...................................................................................... 2-9 2.8 CONTROLS, INDICATORS, TEST POINTS, AND CONNECTORS ....................... 2-9 Section 3Interconnect 3.1 SECTION INTRODUCTION .............................................................................. 3-1 3.2 INSTALL POWER CABLE ASSEMBLIES ............................................................... 3-1 Page TOC-ii 3.3 PDU STRAPPING AND CONNECTIONS ........................................................... 3-3 3.4 SHELF/RACK ALARM CONNECTION .............................................................. 3-5 3.5 DS1 CONNECTIONS (J303 IN AND J304 OUT) .............................................. 3-8 3.6 DS1 REPEATER (J314 ON ONE SHELF TO J314 ON SECOND SHELF) ............ 3-10 3.7 DS3 LBO STRAPPING AND CONNECTIONS ................................................. 3-11 3.8 DS3 LBO DS3 BNC CONNECTIONS (J21 THROUGH J26 ) ............................. 3-12 3.9 DS3 LBO WAYSIDE DS1 CONNECTIONS (J201 IN AND J202 OUT ) ............. 3-13 3.9.1 Wayside DS1 Terminal .................................................................................. 3-14 3.9.2 Wayside DS1 Repeater .................................................................................. 3-15 3.10 DS3 REPEATER (J401 ON ONE SHELF TO J401 ON SECOND SHELF) ............ 3-15 3.11 FIBER OPTIC CABLE CONNECTIONS ............................................................. 3-16 3.11.1 2 or 4 Fiber Management Panel ..................................................................... 3-17 3.11.2 2x4 Fiber Switched Management Panel .......................................................... 3-17 3.12 OC3 AUX INTERFACE BOARD WAYSIDE DS1 CONNECTIONS (J201 IN AND J202 OUT) .............................................................................. 3-20 3.12.1 Wayside DS1 Terminal .................................................................................. 3-20 3.12.2 Wayside DS1 Repeater .................................................................................. 3-20 3.13 OC3 REPEATER (J203 ON ONE SHELF TO J203 ON SECOND SHELF) ........... 3-21 3.14 USI/CONTROLLER CABLE CONNECTION TO LAPTOP (J301) ......................... 3-22 3.15 SERVICE CHANNEL ....................................................................................... 3-22 3.15.1 Handset Jack ................................................................................................. 3-23 3.15.2 Service Channels Provisioning Options ............................................................ 3-24 3.15.3 Audio 1, Audio 2 (J316, J317) ....................................................................... 3-24 3.15.4 RS-232-1, RS-232-2 (J312, J313) .................................................................... 3-27 3.15.5 MCS-11 Connections ..................................................................................... 3-28 3.15.6 ELMC (J315, J318) ........................................................................................ 3-37 3.16 FOREIGN ALARM INTERFACE (J305) ............................................................. 3-41 3.17 ALARM, STATUS, CONTROLS INTERCONNECT ............................................. 3-44 3.17.1 Controller Bus ................................................................................................ 3-46 3.17.2 Control Inputs ................................................................................................ 3-46 3.17.3 Station Alarm Inputs/TBOS Interface ............................................................... 3-46 Page TOC-iii 3.17.4 Station Alarm Wiring ..................................................................................... 3-47 3.17.5 Relay Alarm/Status Outputs .............................................................…

Text truncated - open the document above for the full version.

MDR-8000/i/s/u Alcatel Part Number 3EM15726AA 3400 West Plano Parkway Plano, Texas 75075-5813 U.S.A. Part 2 of 2 Issue 2, June, 2004 Microwave Digital Radios Users Manual 4-1 4 INITIAL TURNUP 4.1 SECTION INTRODUCTION This section describes the procedures required to turn up the MDR-8000 Microwave Digital Radios after installation. This provisioning part of the section describes provisioning options available with the MDR-8000 software application. Provisioning allows for the definition, editing, and storing of specific functions. The MDR-8000 provides the ability to provision equipment and facili- ties through a series of Windows™-based screens and messages. The Provisioning menu lists equipment and functions which may be provisioned. You should use only those provi- sioning screens that are applicable to your radio. Refer to the Users Guide section and applicable DS1/E1, DS3, or OC3 Initial Turnup section on the attached CD for more infor- mation. 4.2 RECOMMENDED SEQUENCE Perform the following initial turnup procedures in sequence: 1 Install software on PC. Software installed at the factory before delivery should not be overwrit- ten by downloading to the radio controller at initial turnup. Refer to Maintenance section on the attached CD for procedure to upgrade exist- ing software. 2 Establish communication between radio and USI computer. Saving provisioning on disk provides a reference for any future provi- sioning changes. 3 Provision radio. See Figure 4-1. The radio has been properly aligned and tested at the factory before shipment eliminating the need for testing after initial turn-up. The only time testing and/or adjustment is required is after a maintenance action such as removal and replacement procedure and/or constant alarms requiring corrective maintenance action. The completed maintenance action procedure(s) will reference any required test procedure(s). Note Note 4-2 Figure 4-1 Provisioning Sequence FIG 4-5 DS3 RADIO CONFIG PROVISIONING FIG 4-2 DS1/E1, DS3, OC3 RADIO CONFIG PROVISIONING FIG 4-6 DS3 FACILITIES PROVISIONING FIG 4-3 DS1/E1 RADIO CONFIG PROVISIONING FIG 4-4 DS1/E1 FACILITIES PROVISIONING FIG 4-8 OC3 RADIO CONFIG PROVISIONING FIG 4-9 OC3 FACILITIES PROVISIONING FIG 4-10 OC3 RADIO WAYSIDE DS1 FACILITIES PROVISIONING FIG 4-7 DS3 RADIO WAYSIDE DS1 FACILITIES PROVISIONING FIG 4-11 DS1/E1, DS3, OC3 RADIO SERVICE CHANNEL PROVISIONING FIG 4-12 DS1/E1, DS3, OC3 RADIO AUDIO PROVISIONING FIG 4-13 DS1/E1, DS3, OC3 RADIO MCS-11 PROVISIONING FIG 4-14 DS1/E1, DS3, OC3 RADIO MCS TRANSPORT/PPP TRANSPORT PROVISIONING FIG 4-17 DS1/E1, DS3, OC3 RADIO CONTROL NAMES PROVISIONING START OPTIONAL ENTRY LMW-9038-sm 05/07/04 FIG 4-16 DS1/E1, DS3, OC3 RADIO ELMC REMOTE TIME-OUT CONSTANT PROVISIONING FIG 4-18 DS1/E1, DS3, OC3 RADIO STATION ALARM NAMES PROVISIONING END OPTIONAL ENTRY FIG 4-15 DS1/E1, DS3, OC3 RADIO ELMC PROVISIONING DS1/E1DS3OC3 4-3 4.3 PROVISIONING RADIO Screen shown is for DS1 Radio. DS3 and OC3 radio configuration pro- visioning is similar. Changes to provisioning do not have to be made in any particular order. Open radio provisioning screens. On main screen, double click on tower icon. Status and alarm screen displays. Click on Provisioning. Check current provisioning and change as required. Figure 4-2 DS1/E1, DS3, OC3 Radio Configuration Provisioning (Sheet 1 of 4) Note ATPC EnabledA&B PA Present RADIO CONFIG: HS Tx/HS RxTERMINAL 6-8 GHz SYSTEM ALARM Visual/AudibleRelays ON/NOStation Alarm 13-16RSL Alarm Enable RSL-Sw EnableEye BER Disable RCV SWITCHING: RADIO TYPE: MDR-8000 DS116 LINES128 TCM OPTIONS: Stat/Prov/WaySideOption Key: SYSTEM ID: TEST1 Disable RADIO LINK ID:ELMC: SELECT DISABLE OR DOUBLE CLICK TO ENABLE (00 DISPLAYS). ENTER 2-DIGIT NUMBER BETWEEN 00 AND 99 AS IDENTIFICATION FOR RADIO RCV/XMT PAIR. USE FOR FREQUENCY COORDINATION IN CONGESTED AREAS THAT HAVE NEARBY TRANSMITTERS AT SAME FREQUENCY WITH SAME MODULATION. ID MUST BE SAME AT BOTH ENDS OF HOP. IF RCV ID DOES NOT MATCH ID RECEIVED FROM FAR-END XMTR, A USI ALARM AND RACK ALARM ARE GENERATED. DISPLAYS NUMBER OF LINES AVAILABLE AS DETERMINED BY CAPACITY KEY. CHANGING NUMBER OF LINES REQUIRES CHANGING CAPACITY KEY. SELECT APPROXIMATE ERROR RATE AT WHICH EYE CLOSURE ALARM ACTIVATES AND SWITCHING OCCURS: EYE BER=1X10 -5 , 1X10 -6 , 1X10 -7 , 1X10 -8 OR SELECT Eye BER Disable TO ACTIVATE ALARMS AT APPROXIMATELY 1X10-6 WITHOUT RECEIVERS SWITCHING. SELECT A&B PA Present IF SHELF IS EQUIPPED WITH A&B PAs, A OR B PA ONLY IF SHELF IS EQUIP- PED WITH ONLY ONE PA, OR NO PA IF SHELF IS NOT EQUIPPED WITH PA. UNEQUIPPED PA ALARMS ARE DISABLED. SELECT Major/Minor TO TRIGGER MAJOR ALARM ON ANY ALARM ON ON-LINE SIDE AND MINOR ALARM ON ANY ALARM ON OFF-LINE SIDE. SELECT Visual/ Audible TO TRIGGER RACK ALARM ON ANY ALARM ON ON-LINE SIDE. DISPLAYS ELMC OPTION KEY TYPE INSTALLED ON CON- TROLLER. STAT (STATUS)/PROV (REMOTE PROVISIONING)/ WAYSIDE (WITH WAYSIDE DS1 MONITORING). NOT PRO- VISIONABLE. CHANGING DISPLAY REQUIRES CHANGING OPTION KEY. SELECT TERMINAL, REPEATER, RING TERMINAL OR RING REPEATER FROM DROP DOWN LIST. SELECT REPEATER IF TRAFFIC AND SERVICE CHANNEL (FOUR RAILS OF X/Y DATA) ARE BEING TRANSPORTED BETWEEN J314 OF BOTH SHELVES. ENABLE OR DISABLE AUTOMATIC POWER CONTROL (ATPC) FUNCTION. SELECT ATPC Disable, ATPC Enabled, OR ATPC with Timeout FROM DROP DOWN LIST. SEE SHEET 2 0F 3 FOR DETAILS. DISPLAYS MODULATION SCHEME. NOT PROVISIONABLE DISPLAYS RADIO TYPE NOT PROVISIONABLE BACKSPACE TO DELETE CURRENT ADDRESS AND ENTER 5-DIGIT REMOTE RACK ADDRESS. SEE FIGURE 6-11 FOR DETAILS. SELECT RSL-Sw Enable TO ENABLE AUTOMATIC RECEIVER SWITCHING BASED ON RSL. WHEN ENABLED, RECEIVER SWITCHES IF: 1. ON-LINE RCV RSL IS BELOW RCV AGC THRESHOLD, AND 2. OFF-LINE RCV RSL IS ABOVE RCV AGC THRESHOLD. SELECT RSL-Sw Disable TO DISABLE AUTOMATIC RECEIVER SWITCHING. LMW-7084 Sheet 1 of 2 02/04/03 SELECT Station Alarm 13-16 TO ENABLE STATION ALARM 13-16 INPUTS TO RELAY INTFC. WHEN EXTERNAL TBOS IS WIRED TO RADIO, SELECT TBOS Display 1-…

Text truncated - open the document above for the full version.

External Photos MDR8705u-XX radio mounted in a rack with over on. MDR-8705u-XX radio (non-standby) without cover.

APPENDIX A: FCC ID Location

%PDF-1.4%âãÏÓ 72 0 obj<< /Linearized 1 /O 74 /H [ 940 242 ] /L 139868 /E 35211 /N 4 /T 138310 >> endobj xref72 25 0000000016 00000 n 0000000847 00000 n 0000001182 00000 n 0000001393 00000 n 0000001497 00000 n 0000001536 00000 n 0000001558 00000 n 0000005177 00000 n 0000005199 00000 n 0000008577 00000 n 0000008599 00000 n 0000012251 00000 n 0000012273 00000 n 0000015848 00000 n 0000015870 00000 n 0000019721 00000 n 0000019743 00000 n 0000023909 00000 n 0000023931 00000 n 0000028166 00000 n 0000028188 00000 n 0000032301 00000 n 0000034978 00000 n 0000000940 00000 n 0000001161 00000 n trailer<</Size 97/Info 70 0 R /Root 73 0 R /Prev 138300 /ID[<ebf8e4328cbc7ee65ce3cf573a5a86df><a5e2b58e52657a769832d9d66991b18f>]>>start xref0%%EOF 73 0 obj<< /Type /Catalog /Pages 69 0 R /Metadata 71 0 R /PageLabels 68 0 R >> endobj95 0 obj<< /S 59 /L 131 /Filter /FlateDecode /Length 96 0 R >> stream H‰b``a``^ÃÀÄÀPÉÁÀÀ<@1V ‡- ̧åV1hg?¶â ̈Ä–ñ‹=bi°&1^Ö"J ìlŒ‹ ¤1°W50±104 ̄`ÿ¶ôƒ ƒ«÷Á ,!û V930‰i #¼ È •endstreamendobj96 0 obj130 endobj74 0 obj<< /Type /Page /Parent 69 0 R /Resources 75 0 R /Contents [ 78 0 R 80 0 R 82 0 R 84 0 R 86 0 R 88 0 R 90 0 R 92 0 R ] /MediaBox [ 0 0 792 1224 ] /CropBox [ 0 0 792 1224 ] /Rotate 270 >> endobj75 0 obj<< /ProcSet [ /PDF ] /ExtGState << /GS1 94 0 R >> /ColorSpace << /Cs6 76 0 R >> >> endobj76 0 obj[ /ICCBased 93 0 R ]endobj77 0 obj3541 endobj78 0 obj<< /Filter /FlateDecode /Length 77 0 R >> stream H‰¤—É®$=...÷÷)êÈ?=¦sÝ $$Øô±1 ̈jÿàõqDœ8 W]$j©o}郧°ýË_ûãÇÏÇ9ÿ¥ÇÏøJßÍ_ÿxœÇ•ÿz¤óñûÇ- ÿt>þüõËo¦Ç_Š¿?¾êl ̄v#=^¤ëèùñüªéybËÑzÀ:mD@Ü,á8š¶åãޱ楹SÍ ×~”, ¥#ÅÁ|Hj éÂ&<èDæƒß’èR¹ èèÿîÿU ́3k– ¥æÜBw<\ìÝó«§ãÎ<ÆQÇtÒÛÑ«ã“ØñÔËq ^6¦ïž€0μ£ÕÐX³Jkyhß'Öã-‘„‹ê*âÙƒgÅç×u-} ÄmCÔ/é ́ÑÓ -ßM,]šï[‡Ú|OYhT¢¥I_tÄ|-yù-iöjùu¤x¦ ́JX³½Œc„¾F¥èwwÔç4Ÿ;ʲr1ñ®ï-Óó\=) ̃¦ã ”\ƒ#CQ¶ÞuKQÃäÙšÖ¡s$5ÌÓðªËè–lμ½<s[uÎøÕ×ø}|ç÷s¡ã÷žŒ`ÙF> ç ̧Œé®K‰Ú\¶-Ô...¹ ́Žpdb™ëZ+/¢‹s;RÏå\7¼kzlÕñ^žm=Ü]³ò•6W{ “|ÛJóe‰V_ °%†Öo\...@Ͻõõ¿zË-¥U©U¾ÂÙZ‚a,„úÊ ̧ ́vŒ-°- μ±!<¥9¬uå”æ ̄ÂÀ¤Üu2áÈ‘ÚÐú¢_3\ZÓ•æjìÁñ¬AL[-μŽ?Q0S’ê,™ÎÏÅz2±ËÀúμ ÈjÀžª „¾F‹Mñ 1< ̈u"μN§üPÄ4šÐ‡ö|}° ́|’‹ÌøÖ^B‘Z1ãóÀîÂŽ† °£cõÝN–({’4Àp.—P`m{Ï_áÅ:òÎè–üJ ‹>~Ðu-Mü|âÔ[ÁA·|¬4‘Ó.Z€1xVC»•öà‘Ü£•÷`Âÿɧ3< 0.Áú€u...*M ́ ïø$-?”ºEÁøÚ™²fÝNœàÒù]ïì`‰- ôà‰þ.ÝýÀi-J?Àw`b·ýC‹QÖäñ¦ðÛHt®’õÎ]ú/YáC©[â-ÔÎ’Ð5;>‚Û»†•³ž}ðæøÖéö ù®xýa?úâÛBïÕéœ{¶Èš—÷Ǥ&cò$ju âª÷x{D”ô–ÚÙ雡üíñ‰p¦â;>fîtÌi6Ø£ÄÌj†ål²\Ñ!=îLûšXq;„§"ï@z*²xžNÙVŒKõμáÃq ÃÇG«wuÙêÓm!RtW@O â‚—«fuÏ'Ø9¼÷ÄÇp>Ç® ìbîéGœ R š«hè!6s¦h«- ́¹rW d©fë9μyppU¶óÆ©á;º”5H‡Tž‚¶ÃÉb ̈’„Ü ¼¤ ̧?éÅ1 Ÿ_3OWjÈÀ ̈Èyèâ+Õ&É]-s+Ê...wõä4- 1d ̃æù•shíògÙÎmYƒ ̧á‘d»6 ìqŠ:`9î ́9ºF±y-...= S Ù ̈ŒmÑ_Ã7 ́Ū†æCÒÑʺÀ½èàÖ©_óP§ ̄0šèZ¶¦èéÄધ‚ÚdÒ ̈dcY~Ò©_Yy§v- £oÐ ́¶unΉnA{€ükR‹>7™“yq%¶£½ ̄|;Ú³ÁKÈŠŠ ̈ÂμÕÌ«„. •P¼>1t©\}‚§„N™§„äŒÎ=èªU|Iu¥ ̃ØÉ‘=ÈÊèáÉf+ÙȩK0-ùùMì\ä=å£;ZŠÍ‚Ëx4Ä5i½å Úî=ˆ8{K-HÝb ̃Þˆ†Ú\.9:Л\z¬ ̈èZ¶–ÊAÌEŸ /b³û×X*‰×¹{– wš¹+'Yþß1ôdøKG({lFÝ#£– ¹õêÊY/Þ‹‹Ü)‚ŒjÇlß™öÖ;ß ́Þî{ÚÓqþ¿ÀBÙ÷9ô'X¹·-o‘Ä¥†ØëÐbw£› 5kßîŽô¤}äÚ@3— "}2õl/•àbrÄb¢÷ºæ[-÷õÄô¼ðAÿ·°`x¤?Üé.röì¡Ç™ƒ¡ ¬3ôäñÙîÝæ2Oj¶ôfv&ÇuГó‚ëÉ{=vóo8.FVhúK¾á/ùªŸû`¢žúØ-ëK¦7 ̄ÍLæÝ›Æâ Ž\xÀCþÉÔ³=mþN ̄,æç¼Ëßp©Ù\‚7¿±Âï³0ål®Q=VêëŠë¡j(ÜNÉvw¥úŠõtÃ܃:F– «.Üñ²K.^!ÕÂï» ̃c¿!Ãn©¼Z.‘ÄÓØ÷/‰®¶k!ÖÚBK ÷Dâ¶Íx8ÃμŸÎD_i*öc}¬‘—ˆ3¡?8ºÓÇ-‹Á|Yöw ̄—ôÅ:•|ý±Œ ̄™îëUG5-j<È8y\ Ä+pkf¦ËØŽ—€¹_Àμ ̈Â3ghëq ̄Lž‡r‡ù¡-÷nQ±RìÔ^l§|0ðt)é#d8¦?ØþdH^÷<)¿ ºÉw×غ ÎRq ÷$É¿„ ø¶fÅvË-nÉUÞcû¬D%‡vç~â wÊÒ§ûªË14ƒßÝYûëSŸe]„pàÐ>jWäxÍ`†ÛÌ_ŸúnƒÇpMß ̈ÂöôÛ`.½‡ïv³_ècáê;Go3»-º”ÁzI ù\r†`F€ÞÐÛlÄ:¢Lo3Ÿ-ºæ3WË6·-Wz3ôžÀmà,egjçàíÚfo‹.ùL‹¾<¼¾Z ÞSºÐŸe²Äær¤-ÖEkY ́¹Ê¼:ÒºÉþΛl½Õgözw§å,bßF¥3uóù÷ÑuT.¹‹„|ôŠ<€zOà²ÎƒÆW 0 ̧ºc.[dÍ嶑e.ã؆ÆÞ¡öØób²ãÕwõw§Ë™Í[²™zÅý$=8{×#ùçܱıq¦7È=þ-]ó)V¾ ̃Ø^ ̄ ̈O ØŽ[é~3~}£¾ ̃Ülí±Ð?...ûo¥æìkç±rë...[ì—bÚ<c9—- fòͺ%Ö×¹Uouμ7“Ӈ裧w¾GúÖtÄù¹›¾>äMnZ+ËÆÚkW^ç79Óì,–çÅbhíÊ‚Û_{™ ̃\ ̈ ̧»...%n ́À– ËO»J-`ŠC«¥÷lf<m”ÆɬyrÜÂŽïrïõäkkŸnrt—¶éø.§»¼ïÀÉ=ÌѼÅç8 dŒ±ËiÞŽ8ErïÜ’½ ̧¥tË8û »Þ“oG ̃¡Ù ̃Bf}ÛÚr¥ÝFul...hbßq»w¶nºÜf—΀-ËáÚ ƒ{s¾K¼A¾ÈHæ®Ûé®LUs ¬¹QnÉаÉó/Ä»óŽëq»ï¶X·Áè|a#¾hÌn_¼êÌP’þM–ûç_¾î{™¥óÜ:$<âpñ’NgÞ.m«Ý¦×· ó~»’ž‹ÝîÚöD ̃,uNÇ¡— !ŽŸl/OGØ“7ûק~úËÂòþz©ùôkø$æwì¼™=z©ä±æבCìù²¾ ̃\^b†Mªd`ëÊ’ƒÝô ;ÔÛÏ&ÿμ8Ùã‰\lßy:ÆìL›‹c ̧ýì:ø¹ ̧ø‹5KCЃ-©ïþœioþæ-l5 ́/ûQå!ª÷ÚÙo±Ö[m•Ítg©BO§ $«‡Ê$÷¥¤eJ#÷2[E½sÇŸnŸ-³žÝv±~Ìz2ìëœÉ™ ̧®AsJÒðutÉ”ÝÖª9!Põ«ëš”—— SEnÚÙ¡ÿû°°ÍéÊKÙ¤“ÀjÃ< =L°ì†E vÄ~j>Ô8ÝoM/Œ ̄ÙH_ñk™¦WÛï†Ó]ÙŽƒ0l?§è¦æsŸûoÇF¶lÚþ]¤È1ö|ÔãÐcu+’ÌTb- ”°... ́<V5.7...-(EB„¶¤- ́(ë=G8^1Z¹4»R{á‡5—ujº“‰Æë ̃h—ãÏ81U}3<Èá|3pÞ òBDÕ<òùÌ–]ïÉ›¡ †S{žÖkÉá1áñÍÊ ÇÊô{gv¼+ uÛREÃ;Èõ<¬%““Œ(|ÂWDoûTèanxT¬ ÂÚ>©kø h%VZ.ÄIú; .å#-0ªÙ™†£éš6ï-T‘9ͱ"ÂdŽ.tÔú§ ...¹Gá_ôzø 4k„¤^4qs-áNĉA»^WzcËO]@ ́UT‡À°}...7‡ûK@Gå Ç; ́èI ́‚‚fv¤Ì^/½TrÈ Å{¥ B21‘’"„+sS'8¬‡HpŒü¹HøâZEÝ-5V(œàâ6û[HGÿÄ/&å̹r¢·dêšgî=.ô¦A ̧úJíù‹Gû€}• 5iJ$ ̈ ̈ÏkÛö~--–›Ü_ ̈-C0Ñ—f¢ö¼É$|Çâ«¢) Õ"þýégA9IÕÝùÛõ$HýÜ墜5 ̄œ„ž§þ¡i– $ ̈ú&{8AÅ...:ù3úEûfHμ½}i©Îë6ž–ãÛù!áSt Ÿ-( ̈hvBÑìw¢¢Ûïä{AÂ÷‚!œ— ›&âÚæi ̃cœù·¿AÙï»òŽnþâfÁî•ÏÛ·ŸEkºBÂrœfEËUÉÚs„D›À0MOKŒœ ØRªã_  ̈ ̃9c܉ð,$æ[Ò™—Ý 8ñáé™í-ä¿ ̈ì"uendstreamendobj79 0 obj3300 endobj80 0 obj<< /Filter /FlateDecode /Length 79 0 R >> stream H‰|WA¶íª ìßQœ <Wbuw ̄wÒùóo<ŒT Ù{ý^ ̈@Š?J?’üœgëé(?÷– ̄4äçWåœZFÊe5]Ë¢§3j ́$ù}eþðÀÃñë8$‰ ¥+Ò'PÏá4@ DŠ8Æ•êŽôvHGMg~â /4‰.–$©•àù{ºäŒàÏdºƒAt°¤–òÚÇ— Yrõ#NWyîï?enÙÿþýS+åì"Ý€V’z €-ž?€X¬ÛdI`\’¤"Á!òw;O¬ Ct“èbI;³ílkê1Rs— žGjañ äòÒ¹E ,‡P8ÏÔƒ‚Étñüð€),íœú^Ùlé¬N ̄¦F Ÿè·HÑ-™è€]ÚzŽ ̃»5- © ̄AàƒÔŠÇ“3ÕˆèåJgy‘ò‚&\,)§C ̧Ï4EĹXýÃFåê“šõ÷ï©,©‡-ºÎtvOwå”ß-œ  ̧ ¶ˆÔ ̧ænzôRS&ó¿¤} F¥lk,ý†:ùü©ïEÅÚó÷O-—wμ$Ж -5>ÀqÓdI—ûLu í° Eü¥¾@ßO—®¥§ ̈`2)G*a €¡-ñªõL®RÜ¢O“üJ¢Z¬~ÐË•B-B†Z}9š Í—”©!.eî-0`éd F÷EH³Â=Hr¦á].ÿ~x€Å ›¬©íLG& íð§59F<NévŸAAÉ DAJp ‹6þ}ô<c&@¶öª° ̈Ñ}ýTŽÙáEŽZ@Ê ì§oo Ý ́IŒ½AWÕpO|"‡?MBvuyu½ÚiR£úó&ƒ7ýoÐÅ°ÛNЇÕUd=xçëi-y]d)¤ “Ó_EGA ñÕuFÑ}«75Úê©ÐBo(Ça íÅŒAŽ3fÙÚ9‹bV†·It‰î¶d8W ̧ü”-5DË+SíòS£Æò)îo+μh— x†nEÖNn…

Text truncated - open the document above for the full version.

OC3 Interface Card (Front View) OC3 Interface Card (Back View)

- 1 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 APPLICATION FOR FCC CERTIFICATION ALCATEL USA Digitally Modulated Radio MODEL FCC ID MDR-8705E-8 JF6-8705u-8 MDR-8705E-16 JF6-8705u-16 MDR-8705E-52 JF6-8705u-52 MDR-8705E-155 JF6-8705u-155 Number of Pages: 50 Date of Report: July 1, 2005 - 2 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 Table of Contents 1.0 Summary of tests -------------------------------------------------------- 3 2.0 General Description ----------------------------------------------------- 4 2.1 Standard Features----------------------------------------------- 4 2.2 Naming Convention -------------------------------------------- 7 2.3 System Configuration------------------------------------------ 8 2.4 Radio Configuration-------------------------------------------- 8 2.5 Features and Options------------------------------------------ 8 2.6 Functional Description---------------------------------------- 12 3.0 Test Methodology--------------------------------------------------------- 15 3.1 Test Facility-------------------------------------------------------- 15 3.2 EUT Setup---------------------------------------------------------- 15 3.3 List of Test Equipment----------------------------------------- 16 4.0 Measurements Results------------------------------------------------- 17 4.1 Maximum Conducted Output Power---------------------- 17 4.2 Minimum 6DB RF Bandwidth-------------------------------- 18 4.3 Peak Power Spectral Density-------------------------------- 20 4.4 Out of Band Conducted Emissions------------------------ 25 4.4.1 MDR-8705u-8------------------------------------------- 26 4.4.2 MDR-8705u-16----------------------------------------- 31 4.4.3 MDR-8705u-52----------------------------------------- 36 4.4.4 MDR-8705u-155--------------------------------------- 41 4.5 Out of Band Radiated Emissions--------------------------- 47 4.6 Radiated Emissions in Restricted Bands---------------- 47 4.7 Antenna Requirement------------------------------------------- 50 - 3 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 1.0 Summary of FCC 15.247 Tests Model: MDR-8705E-8 FCC ID: JF6-8705u-8 Model: MDR-8705E-16 FCC ID: JF6-8705u-16 Model: MDR-8705E-52 FCC ID: JF6-8705u-52 Model: MDR-8705E-155 FCC ID: JF6-8705u-155 Test FCC Reference Results Output Power 15.247 (b) (3) Pass 6dB Bandwidth 15.247 (a) (2) Pass Peak Power Spectral Density 15.247 (d) Pass Out of Band Conducted Emissions 15.247 (c) Pass AC Conducted Emissions 15.207 Not required; battery operation only Out of Band Radiated Emissions 15.247 (c) N/A Antenna requirement 15.203 Pass Elec. Design Engineer: Troy Taylor Date: 07/01/05 RF Group Manager: Duane Mortensen Date: 07/01/05 - 4 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 2.0 General Description The MDR-8705-XX is the MDR-8000/i/s/u version for the unlicensed frequency band: 5725-5850 MHz. It is the latest addition of the Alcatel family of digital microwave products. The MDR–8000/i/s/u series Microwave Digital Radios (see figure 2–1) consists of: · Solid–state, licensed, digital radios that provide transport for DS1, E1, DS3 and OC3 in 2, 4, 6, 7, 8, 10, and 11 GHz RF frequency bands. · Solid–state, unlicensed digital radios that provide transport for DS1, DS3 and OC3 in the 5 GHz RF frequency band. The following capacities and modulation schemes are available: · MDR–8000 – 2, 4, 8, 12, and 16 North American Standard DS1 channels at either 32 or 128 TCM, 1 or 3 North American Standard DS3 channels with 1 or 3 wayside DS1 channels at 64 QAM · MDR–8000i – 2, 4, 8, 12, or 16 CCITT E1 channels at either 32 or 128 TCM · MDR–8000s – 3 North American Standard OC3 with 3 wayside DS1 channels at 128 TCM · MDR–8000u– 2, 4, 8, 12, and 16 North American Standard DS1 channels at 128 TCM or 1DS3 channel at 64 QAM, 1 North American Standard 1STS1 channel with 1 wayside DS1 channel at 128 TCM and 1 North American Standard OC3 channel with 3 way sides DS1 channels at 128 TCM. The radio fits into a standard 19 in. (483 mm) rack and occupies seven vertical rack increments. Up to four fully–equipped hot–standby radios can be mounted in a standard 7 ft rack. The radio is front accessible and can be mounted against a wall or back–to–back against other equipment. 2.1 STANDARD FEATURES Standard features include: · Frequency bands from 2 to 11 GHz · Committee of European Post and Telegraph (CEPT)/Federal Communications Commission (FCC) applications · DS1, E1, DS3, and OC3 Traffic capacities. · International Telecommunications Union (ITU)/ETSI/FCC compliant · Five configuration options - 5 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 · Upstream management compatibility · User–friendly Personal Computer (PC) monitor and control · Automatic Transmitter Power Control (ATPC) · Adaptive Time Domain Equalization (TDE) · Extended Link Monitor Channel (ELMC) · MCS–11/Telemetry Byte Oriented Serial (TBOS) Alarm/Control Interface · Two independent PCM audio channels - 6 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 Figure 2–1 Typical MDR–8000/i/s/u Series Microwave Digital Radio - 7 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 2.2 NAMING CONVENTION The MDR–8000/i/s/u series radio naming conventions are as follows: - 8 - FCC Part 15.247 Digital Modulation Technique Certification Alcatel 1000 Coit Rd., Plano, Texas, 75075 2.3 SYSTEM CONFIGURATIONS The MDR–8000/i/s radio can be provisioned as a terminal, synchronous repeater, ring terminal, or ring repeater. 2.4 RADIO CONFIGURATIONS 2.4.1 Basic Configurations The MDR–8000/i/s/u supports the three basic configurations: · Non–standby – available in all fr…

Text truncated - open the document above for the full version.