JF6-9558L5 GHz rack-mounted point to point transceiver

9500 MPR Product Information57 1 — FCC part 15 subpart B 1.1 — 9500 MPR-A unlicensed radio The JF6-9558H/6933B-9500MPT (MPT-HL) unlicensed radio provides fast deployment of service with microwave radio. No license and small antennas (no FCC and Industry Canada requirements) allow immediate turn-up. After the license is received, the unlicensed MPT-HL radio can be easily converted to the lower 6 GHz licensed band. The JF6-9558L/6933B-9558L and JF6-9558L-D/6933B-9558L-D (MPT-HLC) unlicensed radio provides fast deployment of service with microwave radio. No license and small antennas (no FCC and Industry Canada requirements) allow immediate turn-up. After the license is received, the unlicensed MPT-HLC radio can be easily converted to the lower 6 GHz licensed band. The JF6-9558HC/6933B-9558HC (9558HC) unlicensed radio provides fast deployment of service with microwave radio. No license and small antennas (no FCC and Industry Canada requirements) allow immediate turn-up. The 9558HC unlicensed radio can not be upgraded to licensed operation. The JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B- 9558L and JF6-9558L-D/6933B-9558L-D unlicensed radio operates in the 5725-5850 Information, Scientific, and Medical (ISM) band in accordance with FCC Part 15.247 and IC RSS-210. This unlicensed radio, although operating in the same band as a spread spectrum radio, operates using narrower bandwidths than spread spectrum. The 9558HC 5.8 Unlicensed band (JF6-9558HC/6933B-9558HC) has been certified by the FCC and Industry Canada as of August 7, 2012. 1.2 — FCC Class B compliance statement The JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B- 9558L, and JF6-9558L-D/6933B-9558L-D unlicensed radio have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and IC RSS-210. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This DRAFT FCC Class B requirements 589500 MPR Product Information equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 1.3 — FCC Class B requirements This device complies with part 15 of the FCC Rules and IC RSS-210. Operation is subject to the following three conditions: (1) this device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. (3) This device must be professionally installed. Cet appareil radio est conforme à IC RSS-210. Son fonctionnement respecte les trois conditions suivantes: 1) cette radio ne cause pas d’interférences néfastes, 2) cette radio peut recevoir des interférences, ainsi que des interférences qui peuvent causer des opérations non désirées, et 3) cette radio doit être installée par des Professionnels. The MPT-HLC 5.8 Unlicensed band JF6-9558L/6933B-9558L and JF6-9558L-D/6933B- 9558L-D is not available for quote, sale, or deployment until certification is received. Caution: Changes or modifications not expressly approved by Alcatel-Lucent could void the authority to operate the JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B-9558L, and JF6-9558L-D/6933B-9558L-D (unlicensed) radio. Caution: Installation, Turn-Up, Maintenance, and Operation Instruction supplied with the JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B-9558L, and JF6-9558L-D/6933B-9558L-D (unlicensed) radio require strict adherence for continued part 15 of the FCC Rules and IC RSS-210 compliance. Warning: Regulatory compliance warning: Physical changes or modifications to the JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B-9558L, and JF6-9558L-D/6933B-9558L-D (unlicensed) radio are strictly prohibited. Avertissement pour conformité réglementaire: changements physiques ou modifications sur les radios JF6-9558H/6933B-9500MPT, JF6-9558HC/6933B-9558HC, JF6-9558L/6933B- 9558L, and JF6-9558L-D/6933B-9558L-D (sans licence) sont strictement interdit. DRAFT JF6-9558H and JF6-9558HC (unlicensed) radio 9500 MPR Product Information89 •IETF RFC 2474 •IETF RFC 2475 •IETF RFC 3550 •IETF RFC 0793 •IETF RFC 0791 •IETF RFC 1157 •IETF RFC 768 •IETF RFC 2616 •ITU-T G.664 •ITU-T G.703 •ITU-T G.704 •ITU-T G.706 •ITU-T G.775 •ITU-T G.823 •ITU-T G.8261 •ITU-T G.826 •ITU-T G.921 •ITU-T Recommendation K20 •ITU-T Recommendation K21 •ITU-T Recommendation K45 •ITU-T Recommendation K44 •MEF 8 •NAR EIA-310 •Safety (Canada) •SR-332 •TR NWT 000499 •TR TSY 000191 3.7 — JF6-9558H and JF6-9558HC (unlicensed) radio The JF6-9558H/6933B-9500MPT (MPT-HL) and JF6-9558HC/6933B-9558HC (MPT- HC) unlicensed radio provides fast deployment of service with microwave radio. No license and small antennas (no FCC and Industry Canada requirements) allow immediate turn-up. After the license is received, the unlicensed radio can be easily converted to the lower 6 GHz licensed band. DRAFT JF6-9558H and JF6-9558HC (unlicensed) radio 909500 MPR Product Information The JF6-9558H/6933B-9500MPT and JF6-9558HC/6933B-9558HC unlicensed radio operates in the 5725-5850 Information, Scientific, and Medical (ISM) band in accordance with FCC Part 15.247 and IC RSS-210. This unlicensed radio, although operating in the same band as a spread spectrum radio, operates using narrower bandwidths than spread spectrum. The MPT-HC 5.8 Unlicensed band (JF6-9558HC/6933B-9558HC) is currently being certified and is not available for quote, sale, or deployment. 3.7.1 — FCC class B compliance statement The JF6-9558H/6933B-9500MPT and JF6-9558HC/6933B-9558HC unlicensed radio have been tested and found to comply with the limits for a Cl…

Text truncated - open the document above for the full version.

Back View Back View in Shelf Bottom Transceiver Front Front View in Shelf Top View

.60 1.75 SCALE 4.000 D1TYPE NO.: NEXT ASSY: 1AA 0014 0000 ASZZA (9711) D PRO-E 9 8 LHFBIECDAAGKJ LKJIHGFEDCBAA 24 13 3 10 7 15 6 11 16 12 1 5 14 15 16 14 13 12 11 10 7 6 5 4 3 2 1 ED DATE CHANGE NOTE APPR. AUTHOR.ORIGINATOR MATERIAL FINISH GEN TOL UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES.DEFAULT TOLERANCE ON DIMENSIONS: .XX = 0.02, .XXX = 0.008 TOLERANCE ON HOLE DIAMETERS: UNDER 0.251 DIA.= 0.005 0.251 to .500 DIA.= +0.006/-0.005 OVER 0.500 DIA. = +0.008/-0.005 TOLERANCE ON ANGLES: 1 CONCENTRICITY BETWEEN DIA ON ACOMMON AXIS TO BE WITHIN .010. PART SHALL COMPLY TO 580-5400-001. NOTE: -NSIDS -NSIDS ITEM NUMBER ITEM QUANTITY XX ITEM BALLOON LEGEND SCALE SHEET THIS TRANSFER OF COMMODITIES, TECHNOLOGY OR SOFTWARE, IF FROM THE UNITED STATES, IS AN EXPORT IN ACCORDANCE WITH THE U.S. EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. THE EXPORT OR RE-EXPORT (FURTHER TRANSFER) OF SUCH COMMODITIES, TECHNOLOGY, SOFTWARE OR PRODUCTS MADE FROM SUCH TECHNOLOGY IS PROHIBITED WITHOUT PROPER AUTHORIZATION(S) FROM THE U.S. DEPARTMENT OF COMMERCE OR OTHER APPROPRIATE U.S.GOVERNMENT AGENCY(S) ALCATEL-LUCENT CONFIDENTIAL & PROPRIETARY INFORMATION. CONTAINS TRADE SECRET INFORMATION WHICH IS THE PROPERTY OF ALCATEL-LUCENT AND MUST NOT BE MADE AVAILABLE TO, OR COPIED OR USED BY ANYONE OUTSIDE ALCATEL-LUCENT WITHOUT ITS WRITTEN AUTHORIZATION. Copyright c Alcatel-Lucent .70 2.60 1.30 4.000 3EM 11523 AAAA HCZZA 1 OF 1 LABEL, FCC O. TORREZS. CARSON 01 2002 JUL 01 SEE NOTE 2 EMR10841 TEXT CL 1. MARK 3EM 11523 AAAA MANUFACTURING REV (MFG_REV) AS FOUND IN REFERENCE INDEX, VENDOR ID, AND DATE CODE LOCATED APPROX AS SHOWN PER 8BD010000420 QRZZA. 2. MATERIAL: SCOTCHCAL 220 SERIES SILVER-GRAY, PRESSURE SENSITIVE VINYL OR EQUIVALENT, CHARACTERS TO BE BLACK. D1TYPE NO.: NEXT ASSY: 1AA 0014 0000 ASZZA (9711) D PRO-E 9 8 LHFBIECDAAGKJ LKJIHGFEDCBAA 24 13 3 10 7 15 6 11 16 12 1 5 14 15 16 14 13 12 11 10 7 6 5 4 3 2 1 ED DATE CHANGE NOTE APPR. AUTHOR.ORIGINATOR MATERIAL FINISH GEN TOL UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES.DEFAULT TOLERANCE ON DIMENSIONS: .XX = 0.02, .XXX = 0.008 TOLERANCE ON HOLE DIAMETERS: UNDER 0.251 DIA.= 0.005 0.251 to .500 DIA.= +0.006/-0.005 OVER 0.500 DIA. = +0.008/-0.005 TOLERANCE ON ANGLES: 1 CONCENTRICITY BETWEEN DIA ON ACOMMON AXIS TO BE WITHIN .010. PART SHALL COMPLY TO 580-5400-001. NOTE: -NSIDS -NSIDS ITEM NUMBER ITEM QUANTITY XX ITEM BALLOON LEGEND SCALE SHEET THIS TRANSFER OF COMMODITIES, TECHNOLOGY OR SOFTWARE, IF FROM THE UNITED STATES, IS AN EXPORT IN ACCORDANCE WITH THE U.S. EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. THE EXPORT OR RE-EXPORT (FURTHER TRANSFER) OF SUCH COMMODITIES, TECHNOLOGY, SOFTWARE OR PRODUCTS MADE FROM SUCH TECHNOLOGY IS PROHIBITED WITHOUT PROPER AUTHORIZATION(S) FROM THE U.S. DEPARTMENT OF COMMERCE OR OTHER APPROPRIATE U.S.GOVERNMENT AGENCY(S) ALCATEL-LUCENT CONFIDENTIAL & PROPRIETARY INFORMATION. CONTAINS TRADE SECRET INFORMATION WHICH IS THE PROPERTY OF ALCATEL-LUCENT AND MUST NOT BE MADE AVAILABLE TO, OR COPIED OR USED BY ANYONE OUTSIDE ALCATEL-LUCENT WITHOUT ITS WRITTEN AUTHORIZATION. Copyright c Alcatel-Lucent 7 1 9 1 10 1 9 1 11 1 5 5 5 5 1 MARK ASSY, 3EM 22618 ACAB, MANUFACTURING REVISION AS FOUND IN REFERENCE INDEX, VENDOR ID, AND DATE CODE LOCATED APPROX AS SHOWN PER 8BD 01000 0420 QRZZA. 7.0 .25 4X .15 3.0 5.0 1.000 3EM 22618 ACAB HDZZA 1 of 2 ASSEMBLY, CARDCAGESAW9500 MPR B. BROWN B. BROWN B. BROWN M. RYLAND M. RYLAND M. RYLAND INITIAL RELEASE ECO-0000080960 ECR-0000086836 01 JUN 19 2014 02 NOV 12 2014 03 2015-03-26 N/A N/A SEE NOTE 1 12 1 14 1 15 1 16 1 17 1 9 8 ED LHFBIECDAAGKJ LKJIHGFEDCBAA 24 13 3 10 7 15 6 11 16 12 1 5 14 15 16 14 13 12 11 10 7 6 5 4 3 2 1 1AA 00014 0000 ASZZA (9711) D2 PRO-E 2 of 2 SCALE SHEET THIS TRANSFER OF COMMODITIES, TECHNOLOGY OR SOFTWARE, IF FROM THE UNITED STATES, IS AN EXPORT IN ACCORDANCE WITH THE U.S. EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. THE EXPORT OR RE-EXPORT (FURTHER TRANSFER) OF SUCH COMMODITIES, TECHNOLOGY, SOFTWARE OR PRODUCTS MADE FROM SUCH TECHNOLOGY IS PROHIBITED WITHOUT PROPER AUTHORIZATION(S) FROM THE U.S. DEPARTMENT OF COMMERCE OR OTHER APPROPRIATE U.S.GOVERNMENT AGENCY(S) ALCATEL-LUCENT CONFIDENTIAL & PROPRIETARY INFORMATION. CONTAINS TRADE SECRET INFORMATION WHICH IS THE PROPERTY OF ALCATEL-LUCENT AND MUST NOT BE MADE AVAILABLE TO, OR COPIED OR USED BY ANYONE OUTSIDE ALCATEL-LUCENT WITHOUT ITS WRITTEN AUTHORIZATION. Copyright c Alcatel-Lucent 4 23 2 3 6 1 8 1 1 6 3 12 3EM 22618 ACAB HDZZA 03 1.000 BMA-SMA CONNECTOR INSTALLATION EMI GASKET PLACEMENT BACKPLANE ASSY NOT SHOWN FOR CLARITY MARKED A A A A INSTALL EMI GASKETITEM 13 AS SHOWN16 LOCATIONS

Transceiver RF Board Front View Transceiver RF Board Back View Transceiver Rx Diversity Board Front View Transceiver Rx Diversity Board Back View Transceiver Power Supply Board Front View Transceiver Power Supply Board Back View Transceiver Modem Board Front View Transceiver Modem Board Back View Transceiver Interconnect Board Front View Transceiver Interconnect Board Back View

Standard Power High Power** Standard Power High Power** RF Band BW MHz QAM (n) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Mbps 10-6 BER (dBm) 10-6 BER (dB) Co- Chan (dB) Adj- Chan (dB) Typical (dB) 5.8 GHz 5 4 30.0 -96.5 126.5 6.3 -22 >60 15 -18 5.0 5.8 GHz 5 16 30.0 -89.5 119.5 14.3 -22 >60 21 -17 12.0 5.8 GHz 5 32 30.0 -86.0 116.0 18.0 -22 >60 25 -16 15.0 5.8 GHz 5 64 30.0 -83.5 113.5 22.0 -22 >60 27 -13 17.0 5.8 GHz 5 128 30.0 -81.0 111.0 25.4 -22 >60 30 -10 19.5 5.8 GHz 5 256 30.0 -78.0 108.0 28.8 -22 >60 32 -7 21.5 5.8 GHz 5 512 30.0 -75.0 105.0 31.9 -22 >60 35 -4 23.5 5.8 GHz 5 1024 30.0 -71.5 101.5 34.5 -22 TBD TBD TBD 26.0 5.8 GHz 10 4 30.0 -93.0 123.0 14.7 -22 >60 15 -18 10.5 5.8 GHz 10 16 30.0 -87.5 117.5 29.5 -22 >60 21 -17 17.0 5.8 GHz 10 32 30.0 -84.0 114.0 36.8 -22 >60 25 -16 19.5 5.8 GHz 10 64 30.0 -81.5 111.5 44.9 -22 >60 27 -13 21.0 5.8 GHz 10 128 30.0 -79.0 109.0 52.0 -22 >60 30 -10 20.5 5.8 GHz 10 256 30.0 -75.5 105.5 59.7 -22 >60 32 -7 23.0 5.8 GHz 10 512 30.0 -73.0 103.0 66.5 -22 59 35 -4 24.5 5.8 GHz 10 1024 30.0 -69.5 99.5 72.3 -22 57 39 -1 26.0 5.8 GHz 30 4 30.0 -89.0 119.0 43.4 -22 >60 15 -20 10.5 5.8 GHz 30 16 30.0 -83.0 113.0 90.2 -22 >60 21 -20 15.0 5.8 GHz 30 32 30.0 -79.5 109.5 113.3 -22 >60 25 -18 17.5 5.8 GHz 30 64 30.0 -77.5 107.5 136.4 -22 58 27 -16 19.0 5.8 GHz 30 128 30.0 -74.5 104.5 161.0 -22 55 30 -15 21.0 5.8 GHz 30 256 30.0 -71.5 101.5 183.1 -22 53 32 -13 22.5 5.8 GHz 30 512 30.0 -68.5 98.5 205.5 -22 52 35 -10 24.0 5.8 GHz 30 1024 30.0 -65.0 95.0 227.0 -22 49 39 -7 26.0 L6 GHz 5 4 32.5 35.0 -96.5 129.0 131.5 6.3 -22 >60 15 -18 5.0 L6 GHz 5 16 32.5 35.0 -89.5 122.0 124.5 14.3 -22 >60 21 -17 12.0 L6 GHz 5 32 32.5 35.0 -86.0 118.5 121.0 18.0 -22 >60 25 -16 15.0 L6 GHz 5 64 32.5 35.0 -83.5 116.0 118.5 22.0 -22 >60 27 -13 17.0 L6 GHz 5 128 32.5 35.0 -81.0 113.5 116.0 25.4 -22 >60 30 -10 19.5 9500 MPR MPT-HLC Path Engineering specifications for Fixed/Adaptive Modulation 5.8, 6, 7, 8, 10.5, 11 GHz XPIC Improvement Factor General Transmit Output Power Receiver Threshold System Gain Radio Capacity Receiver Overload DFM T/I 1 of 12 3EM23960AAAATQZZ A April 2015 DRAFT Standard Power High Power** Standard Power High Power** RF Band BW MHz QAM (n) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Mbps 10-6 BER (dBm) 10-6 BER (dB) Co- Chan (dB) Adj- Chan (dB) Typical (dB) L6 GHz 5 256 32.5 34.0 -78.0 110.5 112.0 28.8 -22 >60 32 -7 21.5 L6 GHz 5 512 31.5 34.0 -75.0 106.5 109.0 31.9 -22 >60 35 -4 23.5 L6 GHz 5 1024 31.5 33.0 -71.5 103.0 104.5 34.5 -22 TBD TBD TBD 26.0 L6 GHz 10 4 32.5 35.0 -93.0 125.5 128.0 14.7 -22 >60 15 -18 10.5 L6 GHz 10 16 32.5 35.0 -87.5 120.0 122.5 29.5 -22 >60 21 -17 17.0 L6 GHz 10 32 32.5 35.0 -84.0 116.5 119.0 36.8 -22 >60 25 -16 19.5 L6 GHz 10 64 32.5 35.0 -81.5 114.0 116.5 44.9 -22 >60 27 -13 21.0 L6 GHz 10 128 32.5 35.0 -79.0 111.5 114.0 52.0 -22 >60 30 -10 20.5 L6 GHz 10 256 32.5 34.0 -75.5 108.0 109.5 59.7 -22 >60 32 -7 23.0 L6 GHz 10 512 31.5 34.0 -73.0 104.5 107.0 66.5 -22 59 35 -4 24.5 L6 GHz 10 1024 31.5 33.0 -69.5 101.0 102.5 72.3 -22 57 39 -1 26.0 L6 GHz 30 4 32.5 35.0 -89.0 121.5 124.0 43.4 -22 >60 15 -20 10.5 L6 GHz 30 16 32.5 35.0 -83.0 115.5 118.0 90.2 -22 >60 21 -20 15.0 L6 GHz 30 32 32.5 35.0 -79.5 112.0 114.5 113.3 -22 >60 25 -18 17.5 L6 GHz 30 64 32.5 35.0 -77.5 110.0 112.5 136.4 -22 58 27 -16 19.0 L6 GHz 30 128 32.5 35.0 -74.5 107.0 109.5 161.0 -22 55 30 -15 21.0 L6 GHz 30 256 32.5 34.0 -71.5 104.0 105.5 183.1 -22 53 32 -13 22.5 L6 GHz 30 512 31.5 34.0 -68.5 100.0 102.5 205.5 -22 52 35 -10 24.0 L6 GHz 30 1024 31.5 33.0 -65.0 96.5 98.0 227.0 -22 49 39 -7 26.0 L6 GHz 60 4 32.5 35.0 -87.0 119.5 122.0 80.3 -22 >60 14 -25 10.5 L6 GHz 60 16 32.5 35.0 -81.0 113.5 116.0 159.9 -22 58 20 -25 15.5 L6 GHz 60 32 32.5 35.0 -77.5 110.0 112.5 198.8 -22 54 24 -23 18.0 9500 MPR MPT-HLC Path Engineering specifications for Fixed/Adaptive Modulation 5.8, 6, 7, 8, 10.5, 11 GHz General Transmit Output Power Receiver Threshold System Gain Radio Capacity Receiver Overload DFM T/I XPIC Improvement Factor 2 of 12 3EM23960AAAATQZZ A April 2015 DRAFT Standard Power High Power** Standard Power High Power** RF Band BW MHz QAM (n) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Typical (dBm) Mbps 10-6 BER (dBm) 10-6 BER (dB) Co- Chan (dB) Adj- Chan (dB) Typical (dB) L6 GHz 60 64 32.5 35.0 -74.5 107.0 109.5 256.8 -22 50 26 -20 20.0 L6 GHz 60 128 32.5 35.0 -71.5 104.0 106.5 305.2 -22 48 30 -16 22.0 L6 GHz 60 256 32.5 34.0 -68.5 101.0 102.5 349.0 -22 46 32 -12 23.5 L6 GHz 60 512 31.5 34.0 -65.0 96.5 99.0 395.2 -22 44 36 -10 24.0 L6 GHz 60 1024 31.5 33.0 -61.5 93.0 94.5 434.5 -22 42 39 -7 26.5 U6 GHz 5 4 32.5 35.0 -96.5 129.0 131.5 6.3 -22 >60 15 -18 5.0 U6 GHz 5 16 32.5 35.0 -89.5 122.0 124.5 14.3 -22 >60 21 -17 12.0 U6 GHz 5 32 32.5 35.0 -86.0 118.5 121.0 18.0 -22 >60 25 -16 15.0 U6 GHz 5 64 32.5 35.0 -83.5 116.0 118.5 22.0 -22 >60 27 -13 17.0 U6 GHz 5 128 32.5 35.0 -81.0 113.5 116.0 25.4 -22 >60 30 -10 19.5 U6 GHz 5 256 32.5 34.0 -78.0 110.5 112.0 28.8 -22 >60 32 -7 21.5 U6 GHz 5 512 31.5 34.0 -75.0 106.5 109.0 31.9 -22 >60 35 -4 23.5 U6 GHz 5 1024 31.5 33.0 -71.5 103.0 104.5 34.5 -22 TBD TBD TBD 26.0 U6 GHz 10 4 32.5 35.0 -93.0 125.5 128.0 14.7 -22 >60 15 -18 10.5 U6 GHz 10 16 32.5 35.0 -87.5 120.0 122.5 29.5 -22 >60 21 -17 17.0 U6 GHz 10 32 32.5 35.0 -84.0 116.5 119.0 36.8 -22 >60 25 -16 19.5 U6 GHz 10 64 32.5 35.0 -81.5 114.0 116.5 44.9 -22 >60 27 -13 21.0 U6 GHz 10 128 32.5 35.0 -79.0 111.5 114.0 52.0 -22 >60 30 -10 20.5 U6 GHz 10 256 32.5 34.0 -75.5 108.0 109.5 59.7 -22 >60 32 -7 23.0 U6 GHz 10 512 31.5 34.0 -73.0 104.5 107.0 66.5 -22 59 35 -4 24.5 U6 GHz 10 1024 31.5 33.0 -69.5 101.0 102.5 72.3 -22 57 39 -1 26.0 U6 GHz 30 4 32.5 35.0 -89.0 121.5 124.0 43.4 -22 >60 15 -20 10.5 U6 GHz 30 16 32.5 35.0 -83.0 115.5 118.0 90.2 -22 >60 21 -20 15.0 U6 GHz 30 32 32.5 35.0 -79.5 112.0 114.5 113.3 -22 >60 25 -18 17.5 U6 GHz 30 64 32.5 35.0 -77.5 110.0 112.5 136.4 -22 58 27 -16 19.0 U6 GHz 30 128 32.5 …

Text truncated - open the document above for the full version.

9500 MPR Product Information233 8 — Functional operation 8.1 — Microwave service switch (MSS) Microwave Service Switch (MSS) shelves provides up to 16 Gb/s packet switch node. The MSS incorporates the base–band processing, tributaries interfaces, radio port interfaces and supervision. The MSS is frequency–independent. The MSS-4 and MSS-8 shelf consists of a card cage and backplane in which mounts access and radio peripherals and Core control cards. The MSS-1, MSS-1c and MSS-O shelves are monoboards. The MSS is frequency–independent. The following MSS shelves are available: •MSS-8 shelf •MSS-4 shelf •MSS-1 •MSS-1c shelf •MSS-O 8.1.1 — MSS-8 shelf A fully equipped Microwave Service Switch (MSS-8) shelf provides up to 314 Mb/s full- duplex Ethernet transport capacity per radio carrier channel. MSS-8 shelf provides up to 16 Gb/s packet switching which creates flexible aggregate capacity sharing across DS1/E1, DS3, OC-3/STM-1, and Ethernet traffic. The MSS-8 shelf supports the following: •1 or 2 Core Cards (Main & Spare) •up to 6 Transport cards DRAFT Microwave service switch (MSS) 2349500 MPR Product Information •1 AUX peripheral unit (optional: supported in transport slot #8) •1 DC Converter (optional: supported in transport slots 4, 6, or 8) •1 Fans unit •support for MPT-HC/MC/HC-HQAM/XP/XP-HQAM, and MPT-HL/HLC/HLS radios In the right part of the MSS shelf there are two sub-D 2-pole power supply connectors. 8.1.2 — MSS-4 shelf A fully equipped Microwave Service Switch (MSS-4) shelf provides up to 314 Mb/s full- duplex Ethernet transport capacity per radio carrier channel. MSS-4 shelf provides up to 16 Gb/s packet switching which creates flexible aggregate capacity sharing across DS1/E1, DS3, OC-3/STM-1, and Ethernet traffic. The MSS-4 shelf supports the following: •1 or 2 Core Cards (Main & Spare) •up to 2 Transport cards •1 AUX peripheral unit (optional: supported in Transport slot #4) •1 Fans unit •support for MPT-HC/MC/HC-HQAM/XP/XP-HQAM, and MPT-HL/HLC/HLS radios In the right part of the MSS shelf there is one sub-D 2-pole power supply connector. 8.1.3 — MSS-1 shelf A Microwave Service Switch (MSS-1) shelf provides up to 314 Mb/s full-duplex Ethernet transport capacity per radio carrier channel. The MSS-1 unit provides up to 16 Gb/s packet switching which creates flexible aggregate capacity sharing across E1/DS1 and Ethernet traffic. The MSS-1 unit provides the function of the following: •Main Core-E card •1 P32E1DS1 card with 16 ports •4 housekeeping alarm inputs DRAFT Microwave service switch (MSS) 9500 MPR Product Information235 •support for MPT-HC/MC/HC-HQAM/XP/XP-HQAM radios 8.1.4 — MSS-1c shelf Microwave Service Switch (MSS-1c) shelf provides up to 314 Mb/s full-duplex Ethernet transport capacity per radio carrier channel. MSS-1c is a compact IDU that complements the existing portfolio addressing the last mile, the far end application in nodal solution and cost optimized point-to-point applications. Its small size of 1 rack unit height and half rack width drastically reduces the space consumption in busy sites. Supports MPT-HC/HC-HQAM/XP/XP-HQAM ODU. 8.1.5 — MSS-O The MSS-O provides three 10/100/1000BaseT Ethernet interfaces, two with PFoE, and one GigE optical Ethernet SFP interface. The 10/100/1000BaseT Ethernet interface supports a mixture of user Ethernet ports or MPT-HC/HC-HQAM/XP/XP-HQAM radio ports. The GigE Optical Ethernet interface supports a User Ethernet port. The MSS-O can be installed indoors or outdoors. It is optimized for outdoor installation. 8.1.6 — MSS to Outdoor Unit interconnections 8.1.6.1 — MSS-4/8 to ODU300 interconnection A single 50 ohm coaxial cable connects a ODU300 Modem unit to its ODU. The max. cable length is up to 150 m. ODU cable, connectors and grounding kits are separately provided. The ODU cable carries DC power supply for the ODU and five signals: •Tx telemetry •Reference signal to synchronize the ODU IQ Mod/Demod oscillator •311 MHz IQ modulated signal from the ODU300 Radio Interface (transmit IF) •Rx telemetry •126 MHz IQ modulated signals from the ODU (receive IF) DRAFT Radio 9500 MPR Product Information291 8.2 — Radio The system supports up to eighteen radio channels per node. The system supports a mixture of radio technologies (MPT-HC/HC-HQAM, MPT-MC, MPT-HL, MPT-HLS, MPT-HLC, MPT-XP/XP-HQAM, and/or ODU300) on the same NE. The radio channels can be all the same frequency, different frequencies, or a combination of both. Not all radios are available in both markets. Radio part numbers and frequencies are provided in the 9500 MPR Frequency Plan for MPT Outdoor Transceivers. Radio performances are provided in the 9500 MPR Technical Summary, contact Alcatel-Lucent. 8.2.1 — Radio configuration Support for the following radio configurations: •1+0 and 1+1 Terminal •1+0 and 1+1 Drop and Insert Repeater •1+0 and 1+1 3-Way Junction •1+0 and 1+1 Nodal x-Way Junction 8.2.1.1 — Protection schemes Support for the following radio protection schemes: •1+0 unprotected •1+0 Space Diversity (SD) for MPT-HLS and MPT-HLC with diversity combiner •1+1 Hot StandBy (HSB) •1+1 SD •1+1 Frequency Diversity (FD) •2x(1+0) XPIC •4x(1+0) XPIC •2x(1+1) HSB XPIC For MPT-HLC and MPT-HLS: DRAFT Radio 2929500 MPR Product Information •1+1 HSB space diversity with RPS •1+1 HSB space diversity with combiner •1+1 frequency diversity with combiner •N+0 frequency diversity with combiner •N+0 frequency diversity with XPIC •N+0 frequency diversity with XPIC and combiner: for MPT-HLC only at L6-U6- 11 GHz For MPT-HLC only at L6/U6/11 GHz: •1+1 HSB with antenna protection with diplexer and stack •1+1 HSB 60 MHz compact and stack (L6 only) 8.2.1.2 — Channel spacing See the 9500 MPR Frequency Plan for MPT Outdoor Transceivers for supported channel spacing information. 8.2.1.3 — Radio configuration rules for MPT-MC/HC/HC-HQAM/XP/XP- HQAM For the following configurations using multiple channel arrangements on one antenna, one sub-band for all the MPTs is recommended. If you need to use …

Text truncated - open the document above for the full version.

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:29.6(dBm)* Maximum peak output power at antenna input terminal:918.3(mW) Antenna gain(maximum):42.5(dBi)* Maximum antenna gain:17782.79(numeric) Time Averaging:100(%)* Prediction distance:1200(cm)* Prediction frequency:5700(MHz)* FCC MPE limit for uncontrolled exposure at prediction frequency:1.000 (mW/cm 2 ) IC MPE limit for uncontrolled exposure at prediction frequency:30.60(W/m 2 ) Power density at prediction frequency:0.902(mW/cm 2 ) This equates to:9.02(W/m 2 ) 2 4R PG S π =

Nemko Test Report: 2015 279131 FCC 15247 Applicant: Alcatel Lucent 3400 West Plano Parkway Plano, TX 75075 USA Equipment Under Test: MPT-HLC (E.U.T.) Model #: 3DB19060AA FCC ID.: JF6-9558L IC ID: 6933B-9558L In Accordance With: FCC Part 15, Subpart C, 15.247 and Industry Canada RSS-210, Issue 8 Digital Transmission Systems Tested By: Nemko USA, Inc. 2210 Faraday Avenue. Suite 150 Carlsbad, California 92008 TESTED BY: DATE: 12 March 2015 Tran Phan, Senior Wireless Engineer APPROVED BY: DATE: 12 March 2015 Jim Morris, EMC/Wireless Manager Number of Pages: 81 Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 2 of 81 Table of Contents SECTION 1. SUMMARY OF TEST RESULTS 3 SECTION 2. EQUIPMENT UNDER TEST (E.U.T.) 5 SECTION 3. OCCUPIED BANDWIDTH 6 SECTION 4. MAXIMUM CONDUCTED AVERAGE OUTPUT POWER 16 SECTION 5 SPURIOUS EMISSIONS AT ANTENNA TERMINALS 26 SECTION 6. RADIATED EMISSIONS 51 SECTION 7. MAXIMUM AVERAGE POWER SPECTRAL DENSITY 54 SECTION 8. TEST EQUIPMENT LIST 66 ANNEX A - TEST DETAILS 67 ANNEX B - TEST DIAGRAMS 75 ANNEX C - PHOTO 78 Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 3 of 81 Section 1. Summary of Test Results Manufacturer: Alcatel USA Model No.: MPT-HLC Serial No.: BS1447UW08Y General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C, Paragraph 15.247 and Industry Canada RSS-210, Issue 8 for Digital Transmission Systems. Radiated tests were conducted is accordance with ANSI C63.10-2013. Conducted tests were made in accordance with FCC OET Bulletin 558074 D01 v03r02. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC and Industry Canada. New Submission Production Unit Class II Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “Summary of Test Data”. Nemko USA, Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety, for use by the company’s employees only. This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Nemko USA, Inc. is a NVLAP accredited laboratory. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA, Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 4 of 81 Summary Of Test Data NAME OF TEST PARA. NO. RESULT Powerline Conducted Emissions 15.207(a) / RSS-Gen 7.2.4 Complies Minimum 6 dB Bandwidth 15.247(a)(2) / RSS-210 A8.2(a) Complies Maximum Conducted Average Power Output 15.247(b)(3) / RSS-210 A8.4(4) Complies Spurious Emissions (Antenna Conducted) 15.247(d) / RSS-210 A8.5 Complies Spurious Emissions (Restricted Bands) 15.247(d)/15.209(a) / RSS-Gen 7.2.2 Complies Max Average Power Spectral Density 15.247(e) / RSS-210 A8.2(b) Complies Footnotes: Document History REVISION DATE BY COMMENTS - 03/12/2015 Tran Phan Initial Release - 5/18/2015 James Morris Split Report Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 5 of 81 Section 2. Equipment Under Test (E.U.T.) General Equipment Information Frequency Band (MHz): 902-928 2400-2483.5 5725-5850 Operating Frequency of Test Sample: 5725 to 5850 MHz Channel Spacing: 5, 10 or 30 MHz User Frequency Adjustment: Software controlled Description of EUT 5 GHz rack-mounted point to point transceiver. This model includes two distinct radios as listed below, which were tested together as a system. Not included in this report is: Part # 3DB19060BA, FCC ID.: JF6-9558L-D, IC ID: 6933B-9558L-D This report includes: Part # 3DB19060AA, FCC ID.: JF6-9558L, IC ID: 6933B-9558L. Software revision: 9500MPR 5.2 WebEML Version V05.02.24. Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 6 of 81 Section 3. Occupied Bandwidth NAME OF TEST: Occupied Bandwidth PARA. NO.: 15.247(a)(2) RSS-210 A8.2(a) TESTED BY: Tran Phan DATE: 24 Feb 2015 Test Results: Complies. Measurement Data: See attached plots Test Conditions: 45 %RH 22 °C Measurement Uncertainty: +/-1x10 -7 ppm Test Equipment Used: 1767 The Low/Mid/High Channels were selected as following: Frequency Channel At 5MHz BW At 10MHz BW At 30MHz BW Low 5.731GHz 5.731GHz 5.741GHz Mid 5.781GHz 5.781GHz 5.771GHz High 5.844GHz 5.844GHz 5.834GHz The device was tested on three channels at the highest and lowest data rates. Only result from the lowest data rate was shown due to the worst case scenario. Nemko USA, Inc. FCC PART 15, SUBPART C & Industry Canada RSS-210, Issue 8 Digital Transmission Systems EQUIPMENT: 1767 Test Report No.: 2015 279131 FCC 15247 Page 7 of 81 Test Data – Occupied Bandwidth Low Channel (5.731GHz) 4QAM 5 MHz Channel 6 dB Bandwidth 34. 8 dB O ffs et A Un it dB m 1 MA 1 MAX RB W 1 00 kH z V B W 1 MHz SWT 5 m s I N1 Center5.731 G Hz Span10 MHz1 MHz/ Ref Lvl 3 0 d Bm Ref Lvl 3 0 d Bm RF A t t 2 0 d B -6 0 -50 -40 -30 -2 0 -10 0 10 20 -70 30 1 1 Ma rk e r 1 [T1] 1 8. 54 dB m 5 . 72 884569 GHz 1 [T1 ] 18.5 4 d Bm 5. 728 845 69 G…

Text truncated - open the document above for the full version.