JI5-D3USGSMCD3USG

Install Guide SMCD3USG DOCSIS 3.0 Universal Services Gateway Copyright © 2010 by SMC Networks, Inc. 20 Mason Irvine, California 92618 All rights reserved. Copyright © 2010 by SMC Networks, Inc. 20 Mason Irvine, CA 92618 All rights reserved Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of SMC. Microsoft and Windows are registered trademarks of Microsoft Corporation. Apple and Macintosh are registered trademarks of Apple, Inc. All other brands, product names, trademarks, or service marks are property of their respective owners. GPL/LGPL Licenses Statement This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL used in this product, are available to you at http://gpl.smc.com/. The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL. Contents 1 INTRODUCTION ....................................................................................................................... 1 1.1 WARNINGS ............................................................................................................................................. 1 1.2 SITE PREPARATION ................................................................................................................................... 1 2 HARDWARE OVERVIEW ......................................................................................................... 2 2.1 LED IN D I C ATO R S ..................................................................................................................................... 2 2.2 FRONT PANEL PUSH BUTTONS .................................................................................................................... 4 2.2.1 Finding a Misplaced DECT Handset ................................................................................................ 4 2.2.2 Making a Wireless Connection ....................................................................................................... 4 2.2.3 Registering a DECT Handset ........................................................................................................... 5 2.3 REAR PANEL PORTS .................................................................................................................................. 5 2.4 BOTTOM COMPARTMENTS ......................................................................................................................... 6 3 HARDWARE INSTALLATION .................................................................................................. 7 3.1 PACKAGE CONTENTS ................................................................................................................................. 7 3.2 INSTALLING THE GAT E WAY ......................................................................................................................... 7 3.2.1 Finding a Suitable Location ............................................................................................................ 7 3.2.2 Installing the Battery ...................................................................................................................... 8 3.2.3 Connecting to the LAN .................................................................................................................... 9 3.2.4 Connecting the WAN .................................................................................................................... 10 3.2.5 Powering on the Gateway ............................................................................................................ 10 3.3 WALL-MOUNTING THE GAT EWAY (OPTIONAL) ............................................................................................. 10 4 CONFIGURING YOUR COMPUTER FOR TCP/IP ................................................................. 13 4.1 CONFIGURING MICROSOFT WINDOWS 2000 .............................................................................................. 13 4.2 CONFIGURING MICROSOFT WINDOWS XP .................................................................................................. 14 4.3 CONFIGURING MICROSOFT WINDOWS VI STA .............................................................................................. 15 4.4 CONFIGURING AN APPLE® MACINTOSH® COMPUTER .................................................................................... 17 5 CONFIGURING YOUR GATE WAY ......................................................................................... 18 5.1 DISABLING PROXY SETTINGS .................................................................................................................... 18 5.2 DISABLING FIREWALL AND SECURITY SOFTWARE ........................................................................................... 19 5.3 CONFIRMING YOUR GAT E WAY’S LINK STAT U S .............................................................................................. 19 5.4 ACCESSING THE GAT E WAY’S WEB MANAGEMENT ..............................................…

Text truncated - open the document above for the full version.

ANSI C63.17-2006 (Revision of ANSI C63.17-1998) American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices I E E E 3 Park Avenue New York, NY10016-5997, USA 15 January 2007 Accredited by the American National Standards Institute Sponsored by the Accredited Standards Committee on Electromagnetic Compatibility, ™ Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited. Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited. ANSI C63.17-2006 (Revision of ANSI C63.17-1998) American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices Accredited Standards Committee on Electromagnetic Compatibility, C63™ accredited by the American National Standards Institute Secretariat Institute of Electrical and Electronic Engineers, Inc. Approved 28 June 2006 American National Standards Institute Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited. Abstract: Specific test procedures are established for verifying the compliance of unlicensed personal communications services (UPCS) devices with applicable regulatory requirements regarding radio-frequency emission levels and spectrum access procedures. Keywords: etiquette, personal communications, RF emissions, spectrum access, unlicensed devices, UPCS ________________________ The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright © 2007 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 15 January 2007. Printed in the United States of America. C63 is a trademark of the Accredited Standards Committee on Electromagnetic Compatibility. PXI is a trademark of PXI Systems Alliance, Incorporated. LabVIEW is a trademark of National Instruments, Incorporated. Print: ISBN 0-7381-5021-5 SH95567 PDF: ISBN 0-7381-5022-3 SS95567 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review and users are cautioned to obtain the latest editions. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited. Introduction This introduction is not part of ANSI C63.17-2006, American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices. In November 1993, the Federal Communications Commission (FCC) invited ANSI C63 “to consider development of standard measurement procedures to support” proposed new provisions to Part 15 of Volume 47 of the Code of Federal Regulations (47CFR15) a for unlicensed personal communications services (UPCS) devices. At its December 1993 meeting, ANSI C63 established a subcommittee (SC 7) to attempt to develop such standards in cooperation with representatives of the Wireless Information Networks Forum (WINForum) and other interested parties. The standard ANSI C63.17-1998 was the result of the efforts of SC 7. In the fall of 2004, the FCC revised provisions of 47CFR15 governing the 1920 MHz to 1930 MHz UPCS band. A working group was formed under the aegis of SC 7 to rewrite ANSI C63.17-1998 to reflect the changes in 47CFR15. This revised standard is, again, the result of the efforts of SC 7. Notice to users Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:// standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http://standards.ieee.org/reading/ieee/interp/ index.html.Notice to users Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with re…

Text truncated - open the document above for the full version.

FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page A1 of A1 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT

Label

FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B1 of B9 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B2 of B9 3. Inside View 3 of EUT 4. Inside View 4 of EUT FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B3 of B9 5. Inside View 5 of EUT 6. Inside View 6 of EUT FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B4 of B9 7. Antenna 8. Front view of PCB1 FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B5 of B9 9. Rear view of PCB1 10. Front view of PCB2 FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B6 of B9 11. Rear view of PCB2 12. PCB3 FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B7 of B9 13. PCB4 14. Front view of PCB5 FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B8 of B9 15. Rear view of PCB5 16. Front view of PCB6 FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page B9 of B9 17. Front view of PCB6 18. Rear view of PCB6

FCC ID: JI5-D3USG Sheet 28 of 87 Sheets ETC Report No.: 10-04-MAS-226-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.11 Safety exposure levels 6.11.1 Standard Applicable: FCC 15.319(i) UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091 and 2.1093, as appropriate. All equipment shall be considered to operate in a “general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, if applicable. 6.11.2 Measurement procedure Consideration of radio frequency radiation exposure for EUT is done as SAR test according IEEE1528 (for PP) MPE calculation as below (for FP, Repeater) SAR test results: not applicable MPE calculation: The EUT is considered as a mobile device according to OET Bulletin 65, Edition -97-01. Therefore distance to human body of min. 20 cm is determined. The limit of Power density for General Population / Umcontrolled Exposure is 1.0 mW/cm². Formula: S = EIRP / 4πR² Calculation: EIRP Radiated Power (dBm) 19.13 EIRP Radiated Power (mW) 81.85 R Distance (cm) 20 S Power Density (mW/cm²)0.0163 6.11.3 Results：Complies

FCC ID: JI5-D3USG Sheet 1 of 87 Sheets ETC Report No.: 10-04-MAS-226-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 10-04-MAS-226-01 Client: SMC Networks Inc. Product: SMCD3USG Model: SMCD3USG FCC ID: JI5-D3USG Manufacturer/supplier: SMC Networks Inc. Date test item received: 2010/04/27 Date test campaign completed: 2010/05/06 Date of issue: 2010/05/13 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 87 pages Total number of pages of photos: External photos 1 pages Internal photos 9 pages Setup photos 2 pages Test Engineer Checked By Approved By John Li Joe Hsieh Winpo Tsai FCC ID: JI5-D3USG Sheet 2 of 87 Sheets ETC Report No.: 10-04-MAS-226-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION......................................................................................................... 4 1.1 Testing Laboratory..................................................................................................................... 4 1.2 Client Information....................................................................................................................... 4 1.3 Manufacturer...............................................................................................................................4 2 TEST INFORMATION................................................................................................................... 5 2.1 Description of Tested Device(s)............................................................................................... 5 2.2 Test Environment....................................................................................................................... 5 3 TEST REPORT SUMMARY......................................................................................................... 6 3.1 Test Summary............................................................................................................................ 6 3.2 Other Comments........................................................................................................................ 7 4 TEST SETUP.................................................................................................................................. 8 4.1 Frequency and Timing Measurements................................................................................... 8 4.2 Conducted Emission Tests....................................................................................................... 8 4.3 Radiated Emission Tests.......................................................................................................... 9 4.4 Power line Conducted Tests.................................................................................................... 9 4.5 Monitoring Tests....................................................................................................................... 10 5 TEST EQUIPMENT LIST............................................................................................................ 11 6 TEST RESULT............................................................................................................................. 12 6.1 Coordination with fixed microwave........................................................................................ 12 6.2 Cross Reference...................................................................................................................... 13 6.3 Labeling Requirements........................................................................................................... 14 6.4 Power line Conducted Emissions.......................................................................................... 15 6.5 Antenna Requirement............................................................................................................. 18 6.6 Digital Modulation Techniques............................................................................................... 18 6.7 Peak Transmit Power.............................................................................................................. 19 6.8 Power Spectral Density........................................................................................................... 22 6.8 Power Spectral Density........................................................................................................... 23 6.9 Antenna Gain............................................................................................................................ 26 6.9 Antenna Gain............................................................................................................................ 27 6.10 Automatic discontinuation of transmission......................................................................... 27 6.11 Safety exposure levels.......................................................................................................... 28 6.12 Emission Bandwidth B.......................................................................................................... 29 6.13 Monitoring time....................................................................................................................... 32 FCC ID: JI5-D3USG Sheet 3 of 87 Sheets ETC Report No.: 10-04-MAS-226-01 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0 6.13 Monitoring time......................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page 1 of 2 Photos of Radiation Measuring Setup FCC ID: JI5-D3USG ETC Report No.: 10-04-MAS-226-01 Page 2 of 2 Photos of Conduction Measuring Setup