JI5-SMCSR01Z1Home Siren Repeater

Copyright © 2012 SMC Networks Page 1 All Rights Reserved I/M SMCSRXX-Z rev. 2.2 6/20/2012 1 Models The SMC Siren Repeater comes in two versions:  SMCSR01-Z (North American version)  includes an Electrical Outlet Mounting Tab (see Figure 2 on page 2)  SMCSR01-Z CA (Canadian version)  no provisions for securing device to an electrical outlet 2 Parts List  Battery Cover and Screw  (2) rubber pads  Battery  Tamper Switch NA version only:  (3) plastic washers  Electrical outlet screw 3 Package Contents The package comes with a wall-mounting kit containing 1 SMCSR01-Z and 2 tamper button rubber pads. A lithium polymer rechargeable battery is located inside the battery compartment. The NA version includes 3 plastic washers and a longer electrical outlet screw. 4 Specifications Input Voltage: 110 VAC to 240 VAC 60 Hz Peak Input Amp: 1A Max Wattage: 15W Power Limited Peak Output Voltage: 5V Power Limited Peak Output Amp: 3A Backup Battery Duration: >24 hrs Nominal Battery Voltage Range: 3.4V to 4.1V Maximum Battery Voltage: 4.2V Operating Temperature: 32F to 104F (0C to 40C) Storage Temperature: 14F to 140F (-10C to 60C) Battery Storage Temperature: -20C to 60C (1 week max) -20C to 45C (3 week max) -20C to 20C (1 year max) Recommended Battery Storage Temperature: 20C +/- 2C Operating Relative Humidity: 10% to 90% noncondensing Storage Relative Humidity: 5% to 95% noncondensing Enclosure Dimensions: 3.81"L x 2.16"W x 1.58 H (97 mm x 55 mm x 40.3 mm) Max Volume: >85dB per UL measurement Compatible Control Unit(s): RB5701-Z XXX 5 Key Components Figure 1. Front View SMC Wireless Siren ZigBee Range Extender Guide Congratulations on purchasing your SMC ZigBee Siren Repeater The SMC ZigBee Wireless Siren Repeater is a multipurpose fire and burglar alarm signaling device that performs two main functions in the SMC home-security product lineup. It emits sound at levels greater than 85dB, loud enough to provide an audible alert and scare intruders. It also increases the range of your RB5701-Z Homes Security and Automation Gateway wireless remote controls, motion sensors, and security products by boosting and retransmitting the RF signals it receives from those products. continued on next page White LED Strobe Light Green, Red Amber Status LEDs SMC Wireless Siren ZigBee Range Extender Guide Copyright © 2012 SMC Networks Page 2 All Rights Reserved I/M SMCSRXX-Z rev. 2.2 5/20/2012 Figure 2. Rear View 6 Precautionary Statements Battery Precautions DO NOT dismantle, open, or shred the battery. The battery should be dismantled only by trained personnel. DO NOT short-circuit the battery. DO NOT store the battery haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. DO NOT expose the battery to heat or fire. Avoid storage in direct sunlight DO NOT subject the battery to mechanical shock. DO NOT use any other charger other than the one built into the SMCSR01-Z. DO NOT use any other battery that is not designed for use with this product. Seek medical attention if a battery has been swallowed. Wipe the battery clean with a dry cloth if the battery becomes dirty. Test the Siren Repeater at least once a week: A. Disconnect the Siren Repeater from the mains electrical power source, so the Siren Repeater is running in battery mode. B. After 24 hours in standby mode, perform an alarm system test. The Siren Repeater should sound for 4 minutes before shutting off. If it does not remain in standby mode for 24 hour or does not sound for the full 4 minutes after 24 hour standby, the battery must be replaced. Device Precautions Proper device operation depends on proper installation, usage, and maintenance of the device. The North American model (SMCSR01-Z) has provisions to secure the Siren Repeater to an electrical outlet using the electrical mounting tab inherent in the design of this model. Canadian regulations and safety standards forbid the use of such device. The Canadian model (SMCSR01-Z CA) does not have the electrical outlet mounting tab necessary to secure the device to an electrical wall outlet. If you received a device that has an electrical outlet mounting tab and this product is to be used in Canada, please contact the distributor or retail location where this device was purchased and obtain the Canadian model (SMCSR01-Z CA). The battery is a lithium rechargeable battery. Do not drop, crush, incinerate, or damage in any form. Note: DO NOT CONNECT TO A RECEPTACLE CONTROLLED BY A SWITCH. This system must be tested by a qualified technician at least once every three (3) years. Install the system in accordance with Chapter 2 of the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.) Return the device to an authorized distributor or to SMC Networks Inc., 20 Mason, Irvine, CA 92618 for servicing or repair in case of malfunction. Electrical Outlet Mounting Tab (NA version only) AC Receptacle Tamper Switch Battery Cover & Screw continued on next page SMC Wireless Siren ZigBee Range Extender Guide Copyright © 2012 SMC Networks Page 3 All Rights Reserved I/M SMCSRXX-Z rev. 2.2 6/20/2012 7 Selecting a Location The Siren Repeater lets you extend the range of your home security system to accommodate longer distances and broaden your security coverage. As a result, select a location that has average signal strength and resides between the Touchscreen and the furthest sensor, such as a gameroom or bedroom, to boost the wireless signal strength for sensors located furthest from the Touchscreen. The number, thickness, and location of walls, ceilings and other objects that the signals must pass through may limit the range of the Range Extender. Typical ranges vary, depending on the types of materials and background radio frequency (RF) noises in your home or business. To maximize your range:  Keep the number of walls and ceilings between the Touchscreen and the Siren Repeater to…

Text truncated - open the document above for the full version.

Report No.: 110516E05A Page 1 Reference No.: 120224E09 CONSTRUCTION PHOTOS OF EUT Report No.: 110516E05A Page 2 Reference No.: 120224E09

FCC ID：JI5-SMCSR01Z1 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device.

Report No.: 110516E05A Page 1 Reference No.: 120224E09 CONSTRUCTION PHOTOS OF EUT Report No.: 110516E05A Page 2 Reference No.: 120224E09 Report No.: 110516E05A Page 3 Reference No.: 120224E09 Report No.: 110516E05A Page 4 Reference No.: 120224E09 Report No.: 110516E05A Page 5 Reference No.: 120224E09 Report No.: 110516E05A Page 6 Reference No.: 120224E09

Report No.: SA120224E09A 1 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 RF EXPOSURE REPORT REPORT NO.: SA120224E09A MODEL NO.: SMCSR01-Z FCC ID: JI5-SMCSR01Z1 RECEIVED: Feb. 24, 2012 TESTED: May 22, 2012 ISSUED: July 17, 2012 APPLICANT: SMC Networks ADDRESS: 20 Mason, Irvine, California 92618 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA120224E09A 2 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA120224E09A 3 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120224E09A Original release July 17, 2012 Report No.: SA120224E09A 4 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 1. CERTIFICATION PRODUCT: Home Siren Repeator BRAND NAME: SMC MODEL NO.: SMCSR01-Z TEST SAMPLE: MASS-PRODUCTION APPLICANT: SMC Networks TESTED DATE: May 22, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: SMCSR01-Z) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: July 17, 2012 ( Elsie Hsu, Specialist ) APPROVED BY : , DATE: July 17, 2012 ( May Chen, Deputy Manager ) Report No.: SA120224E09A 5 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120224E09A 6 of 6 Report Format Version 5.0.0 Reference No.: 120713E01 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2405-2475 68.234 2.5 20 0.02414 1.00 --- END ---

Report No.: RF110516E05A 1 of 40 Report Format Version 5.0.0 Reference No.: 120224E09 FCC TEST REPORT REPORT NO.: RF110516E05A MODEL NO.: SMCSR01-Z FCC ID: JI5-SMCSR01Z1 RECEIVED: Feb. 24, 2012 TESTED: Mar. 09 to May 23, 2012 ISSUED: June 22, 2012 APPLICANT: SMC Networks ADDRESS: 20 Mason, Irvine, California 92618 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF110516E05A 2 of 40 Report Format Version 5.0.0 Reference No.: 120224E09 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 13 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 14 3.5 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 14 4. TEST TYPES AND RESULTS .............................................................................. 15 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 15 4.1.2 TEST INSTRUMENTS .......................................................................................... 15 4.1.3 TEST PROCEDURES .......................................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 16 4.1.5 TEST SETUP ....................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 17 4.1.7 TEST RESULTS ................................................................................................... 18 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 20 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 20 4.2.2 TEST INSTRUMENTS .......................................................................................... 21 4.2.3 TEST PROCEDURES .......................................................................................... 23 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 23 4.2.5 TEST SETUP ....................................................................................................... 24 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 24 4.2.7 TEST RESULTS ................................................................................................... 25 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 29 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 29 4.3.2 TEST INSTRUMENTS .......................................................................................... 29 4.3.3 TEST PROCEDURE ............................................................................................. 29 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 29 4.3.5 TEST SETUP ....................................................................................................... 29 4.3.6 EUT OPERATING CONDITIONS ............................................…

Text truncated - open the document above for the full version.

Report No.: 110516E05A Reference No.: 120224E09 1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 110516E05A Reference No.: 120224E09 2 RADIATED EMISSION TEST(BELOW 1GHz) Report No.: 110516E05A Reference No.: 120224E09 3 RADIATED EMISSION TEST(ABOVE 1GHz)