JUP-95807WFBTWLAN+ Bluetooth Combo Module

o9'rrimble Trimble Navigation Limited 888 Tasman Drive Milpitas, CA 95035 (408) 48r-8000 August 20,2014 To Whom lt May Concern, I am the FCC grantee contact of record in the FCC Grantee Code data base for FCC Grantee Code 'JUP'. Pursuant to FCC KDB # 852134 , FCC Authorized lndividual Policy (Form 731),1hereby designate the following Trimble employees as agents authorized to sign FCC and TCB Form 731 Applications for Equipment Authorization, attestations required of applications, and requests for confidentiality. Gerardo Torres / Compliance Manager Hui Chen / Compliance Engineer Patrick Robinson / Compliance Engineer Per KBD 852134, a copy of this authorization letter is required to be placed in the Cover Letters exhibit folder of each Application. Sincerely, ruo* Patrick Deane Director of Hardware / Firmware Engineering Field Service Management Division Trimble Navigation Phone: +1 408 4566624 Fax: +1 408 4324285 e-mail: [email protected]

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 97 of 100 FCC Part 15C & IC RSS-210 Test Report 17 Exhibit C - EUT Photographs 17.1 EUT - Top View 17.2 EUT - Bottom View

Responsibility for Validation and Fitness-of-Use: Because Valmark Industries, Inc. has no controlover the use or application of these parts, it is the sole responsibility of the OEM customer and/or its designated manufacturer to test all custom parts for fitness-of-use and validation of design prior to acceptance of production units. Valmark Industries provides expertise in the layout and consistent fabrication of high quality, reliable membrane switch, custom graphics and labeling products. Valmark and its employees do NOT purport to be experts in the end-use application of our customers, or the environments in which these products will be stored and/or used. THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24 HOURS IN ORDER FOR THIS JOB TO PROCEED WITH PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE PRODUCTION RUN. (1) Valmark may, at its discretion unless otherwise noted, substitute any materials or BOM components with equivalent or similar materials and/or components based on control of cost or availability APPROVAL PRINT RESUBMIT WITH CORRECTIONS APPROVED WITH CORRECTIONS OK AS IS APPROVAL SIGNATURE DATE TRIMBLE Customer Supplied Prints Part Number Date Dimensional Graphics Modifications DescriptionECO #Rev. Date NOTES:CONSTRUCTION: BASE MATERIAL ADHESIVE - FULL .007” GE FR83-112 3M 468 DETAILED DIMENSIONS ARE IN THE CUSTOMER SUPPLIED DRAWING LABEL PERIPHERY-keyline does not print BACKGROUND: TRIMBLE MED. GREY NCS 5505-BO7G GRAPHICS: BLACK WHITE FOR OPACITY 1 2 3 4 94469-00 01 FCC ID: JUP-95807WFBT FCC ID: QIPPHS8-P IC: 1756A-95807WFBT IC ID: 7830A-PHS8P P/N: 90911-00 1.300 2.620 BARCODE 128 READS 90911-00 R .025 TYP 1 1.000 0.250 APPROVALSDATE DRW DW07/11/14 COMPANY (OEM) SCALE PART NO. 1 : 1 REV MANUFACTURERS: SHEET 1 of 1 CHK DSN ENGR THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED, UNITS ARE IN INCHES. TOLERANCES: INTERPRET DRAWING PER ANSI Y14.5M - - 1994 DO NOT SCALE DRAWING .XX ±0.01” .XXX ±0.010” TOOLING: ANGLES ±0.5º .XX ±0.02” .XXX ±0.015” CUT TO GRAPHICS: ANGLES ±0.5º Valmark Interface Solutions A Nidec Kinetek Company ® CONTAINS: Responsibility for Validation and Fitness-of-Use: Because Valmark Industries, Inc. has no controlover the use or application of these parts, it is the sole responsibility of the OEM customer and/or its designated manufacturer to test all custom parts for fitness-of-use and validation of design prior to acceptance of production units. Valmark Industries provides expertise in the layout and consistent fabrication of high quality, reliable membrane switch, custom graphics and labeling products. Valmark and its employees do NOT purport to be experts in the end-use application of our customers, or the environments in which these products will be stored and/or used. THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24 HOURS IN ORDER FOR THIS JOB TO PROCEED WITH PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE PRODUCTION RUN. (1) Valmark may, at its discretion unless otherwise noted, substitute any materials or BOM components with equivalent or similar materials and/or components based on control of cost or availability APPROVAL PRINT RESUBMIT WITH CORRECTIONS APPROVED WITH CORRECTIONS OK AS IS APPROVAL SIGNATURE DATE TRIMBLE Customer Supplied Prints Part Number Date Dimensional Graphics Modifications DescriptionECO #Rev. Date NOTES:CONSTRUCTION: BASE MATERIAL ADHESIVE - FULL .007” GE FR83-112 3M 468 DETAILED DIMENSIONS ARE IN THE CUSTOMER SUPPLIED DRAWING LABEL PERIPHERY-keyline does not print BACKGROUND: TRIMBLE MED. GREY NCS 5505-BO7G GRAPHICS: BLACK WHITE FOR OPACITY 1 2 3 4 94469-60 01 FCC ID: JUP-95807WFBT FCC ID: QIPPHS8-P FCC ID: KEAXDLM IC: 1756A-95807WFBT IC ID: 7830A-PHS8P IC: 2368B-XDLM P/N: 90911-60 1.300 2.620 BARCODE 128 READS 90911-60 R .025 TYP 1 1.000 0.250 APPROVALSDATE DRW DW07/11/14 COMPANY (OEM) SCALE PART NO. 1 : 1 REV MANUFACTURERS: SHEET 1 of 1 CHK DSN ENGR THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED, UNITS ARE IN INCHES. TOLERANCES: INTERPRET DRAWING PER ANSI Y14.5M - - 1994 DO NOT SCALE DRAWING .XX ±0.01” .XXX ±0.010” TOOLING: ANGLES ±0.5º .XX ±0.02” .XXX ±0.015” CUT TO GRAPHICS: ANGLES ±0.5º Valmark Interface Solutions A Nidec Kinetek Company ® CONTAINS: Responsibility for Validation and Fitness-of-Use: Because Valmark Industries, Inc. has no controlover the use or application of these parts, it is the sole responsibility of the OEM customer and/or its designated manufacturer to test all custom parts for fitness-of-use and validation of design prior to acceptance of production units. Valmark Industries provides expertise in the layout and consistent fabrication of high quality, reliable membrane switch, custom graphics and labeling products. Valmark and its employees do NOT purport to be experts in the end-use application of our customers, or the environments in which these products will be stored and/or used. THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24 HOURS IN ORDER FOR THIS JOB TO PROCEED WITH PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE PRODUCTION RUN. (1) Valmark may, at its discretion unless otherwise noted, substitute any materials or BOM components with equivalent or similar materials and/or components based on control of cost or availability APPROVAL PRINT RESUBMIT WITH CORRECTIONS APPROVED WITH CORRECTIONS OK AS IS APPROVAL SIGNATURE DATE TRIMBLE Customer Supplied Prints Part Number Date Dimensional Graphics Modifications DescriptionECO #Rev. Date NOTES:CONSTRUCTION: BASE MATERIAL ADHESIVE - FULL .007” GE FR83-112 3M 468 DETAILED DIMENSIONS ARE IN THE CUSTOMER SUPPLIED DRAWING LABEL PERIPHERY-keyline does not print BACKGROUND: TRIMBLE MED. GREY NCS 5505-BO7G GRAPHICS: BLACK WHITE FOR OPACITY 1 2 3 4 94469-91 01 FCC ID: JUP-9091191 IC: 1756A-9091191 FCC ID: JUP-95807WFBT FCC ID: QIPPHS8-P IC: 1756A-95807WFBT IC ID: 7830A-PHS8P P/N: 90911-91 1.300 2.…

Text truncated - open the document above for the full version.

Bluetooth/Wi-Fi Module Murata LBEE1DARRC-519 (Based on Marvell 88W8787 chipset) We are seeking limited Modular Approval: FCC ID: JUP095807WFBT IC: 1756A-95807WFBT M/N: LBEE1DARRC-519 Since the module size is too small, when installed into the host, an additional permanent label referring to the enclosed module: “Contains FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT” must be used. Host Devices R10 Trimble P/N 9058X-XX Trimble P/N 100070-XX Host PCB Wi-Fi/BT Module

CONTAINS FCC ID: JUP-95807WFBT CONTAINST IC: 1756A-95807WFBT P/N 100070-00 CONTAINST IC: 1756A-95807WFBT

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 98 of 100 FCC Part 15C & IC RSS-210 Test Report 17.3 Host Model: R10 17.4 Host Model: R10 Antenna and Location

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 99 of 100 FCC Part 15C & IC RSS-210 Test Report 17.5 Host Model: Trimble P/N 9058X-XX 17.6 Host Model: Trimble P/N 9058X-XX Antenna and Location

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 100 of 100 FCC Part 15C & IC RSS-210 Test Report 17.7 Host Model: Trimble P/N 100070-XX 17.8 Host Model: Trimble P/N 100070-XX Antenna and Location --- END OF REPORT ---

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.3) FCC PART 15 SUBPART C IC RSS-210, ISSUE 8, DEC 2010 TEST AND MEASUREMENT REPORT For Trimble Navigation Ltd. 935 Stewart Drive, Sunnyvale, CA 94085, USA Report Type: Original Report Product Type: Wi-Fi and BT Combo Module Prepared By: Chen Ge Report Number: R1406117-247 DSS Report Date: 2014-09-23 Reviewed By: Ivan Cao RF Leade r Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 FCC ID: JUP-95807WFBT IC: 1756A-95807WFBT Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 2 of 100 FCC Part 15C & IC RSS-210 Test Report TABLE OF CONTENTS 1 GENERAL DESCRIPTION ......................................................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ................................................................................ 6 1.2 MECHANICAL DESCRIPTION OF EUT ....................................................................................................................... 6 1.3 OBJECTIVE ............................................................................................................................................................... 6 1.4 RELATED SUBMITTAL(S)/GRANT(S) ........................................................................................................................ 6 1.5 TEST METHODOLOGY .............................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................... 6 1.7 TEST FACILITY ........................................................................................................................................................ 6 2 SYSTEM TEST CONFIGURATION .......................................................................................................................... 8 2.1 JUSTIFICATION ......................................................................................................................................................... 8 2.2 EUT EXERCISE SOFTWARE ...................................................................................................................................... 8 2.3 SPECIAL ACCESSORIES ............................................................................................................................................ 8 2.4 EQUIPMENT MODIFICATIONS ................................................................................................................................... 8 2.5 LOCAL SUPPORT EQUIPMENT LIST .......................................................................................................................... 8 2.6 EUT INTERNAL CONFIGURATION DETAILS .............................................................................................................. 8 2.7 EXTERNAL I/O CABLING LIST AND DETAILS ........................................................................................................... 8 3 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 4 FCC §15.247 (I), §2.1091 & IC RSS-102 - RF EXPOSURE .................................................................................... 10 4.1 APPLICABLE STANDARD ........................................................................................................................................ 10 4.2 MPE PREDICTION .................................................................................................................................................. 11 4.3 MPE RESULTS ....................................................................................................................................................... 11 5 FCC §15.203 & IC RSS-GEN §7.1.2 – ANTENNA DESCRIPTION ...................................................................... 12 5.1 APPLICABLE STANDARD ........................................................................................................................................ 12 5.2 ANTENNA CONNECTOR CONSTRUCTION ................................................................................................................ 12 6 FCC §15.207 & IC RSS-GEN §7.2.4 – AC LINE CONDUCTED EMISSIONS .................................................... 13 6.1 APPLICABLE STANDARDS ...................................................................................................................................... 13 6.2 TEST SETUP ........................................................................................................................................................... 13 6.3 TEST PROCEDURE .................................................................................................................................................. 13 6.4 TEST SETUP BLOCK DIAGRAM ............................................................................................................................... 14 6.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................. 15 6.6 TEST EQUIPMENT LIST AND DETAILS ................................................................…

Text truncated - open the document above for the full version.

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 88 of 100 FCC Part 15C & IC RSS-210 Test Report 16 Exhibit B - Test Setup Photographs 16.1 Radiated Emission below 1 GHz Front View (in Host: R10) 16.2 Radiated Emission below 1 GHz Rear View (in Host: R10) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 89 of 100 FCC Part 15C & IC RSS-210 Test Report 16.3 Radiated Emission above 1 GHz Front View (in Host: R10) 16.4 Radiated Emission above 1 GHz Rear View (in Host: R10) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 90 of 100 FCC Part 15C & IC RSS-210 Test Report 16.5 AC Line Conducted Emission Front View (in Host: R10) 16.6 AC Line Conducted Emission Side View (in Host: R10)

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 91 of 100 FCC Part 15C & IC RSS-210 Test Report 16.7 Radiated Emission below 1 GHz Front View (in Host: Trimble P/N 9058X-XX) 16.8 Radiated Emission below 1 GHz Rear View (in Host: Trimble P/N 9058X-XX) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 92 of 100 FCC Part 15C & IC RSS-210 Test Report 16.9 Radiated Emission above 1 GHz Front View (in Host: Trimble P/N 9058X-XX) 16.10 Radiated Emission above 1 GHz Rear View (in Host: Trimble P/N 9058X-XX) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 93 of 100 FCC Part 15C & IC RSS-210 Test Report 16.11 AC Line Conducted Emission Front View (in Host: Trimble P/N 9058X-XX) 16.12 AC Line Conducted Emission Side View (in Host: Trimble P/N 9058X-XX)

Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 94 of 100 FCC Part 15C & IC RSS-210 Test Report 16.13 Radiated Emission below 1 GHz Front View (in Host: Trimble P/N 100070-XX) 16.14 Radiated Emission below 1 GHz Rear View (in Host: Trimble P/N 100070-XX) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 95 of 100 FCC Part 15C & IC RSS-210 Test Report 16.15 Radiated Emission above 1 GHz Front View (in Host: Trimble P/N 100070-XX) 16.16 Radiated Emission above 1 GHz Rear View (in Host: Trimble P/N 100070-XX) Trimble Navigation Ltd. FCC ID: JUP-95807WFBT, IC: 1756A-95807WFBT Report Number: R1406117-247DSS Page 96 of 100 FCC Part 15C & IC RSS-210 Test Report 16.17 AC Line Conducted Emission Front View (in Host: Trimble P/N 100070-XX) 16.18 AC Line Conducted Emission Side View (in Host: Trimble P/N 100070-XX)