JUP69991Juno ST Pocket PC

Draft Version 1.00 Revision A April 2007  USER GUIDE Juno ™ ST handheld Draft 2 Juno ST Handheld User Guide Trimble Navigation Limited 10355 Westmoor Drive Suite #100 Westminster, CO 80021 USA www.trimble.com Legal Notices Copyright and Trademarks © 2007, Trimble Navigation Limited. All rights reserved. Trimble, the Globe & Triangle logo, and GPS Pathfinder are trademarks of Trimble Navigation Limited, registered in the United States Patent and Trademark Office and other countries. BoB, EVEREST, GeoBeacon, GeoXH, GeoXM, GeoXT, GPS Analyst, GPScorrect, H-Star, Juno, TerraSync, VRS, and Zephyr are trademarks of Trimble Navigation Limited. Microsoft, Windows, Windows Mobile and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Trimble Navigation Limited is under license. All other trademarks are the property of their respective owners. This product is covered by the following US patents: 5,187,450; 5,311,149; 5,402,450; 5,493,588; 5,815,539; 6,377,891; 6,587,788; and 6,807,485. Release Notice This is the April 2007 release (Revision A) of the Juno ST Handheld User Guide. It applies to version 5.1.13 of the Juno ST handheld operating system and firmware. The Juno ST handheld’s operating system is based on the Microsoft Windows Mobile version 5.0 software for Pocket PC (5.1.1702). Limited Warranty Terms and Conditions Product Limited Warranty Subject to the terms and conditions set forth herein, Trimble Navigation Limited (“Trimble”) warrants that for a period of (1) year from date of purchase this Trimble product (the “Product”) will substantially conform to Trimble's publicly available specifications for the Product and that the hardware and any storage media components of the Product will be substantially free from defects in materials and workmanship. Product Software Product software, whether built into hardware circuitry as firmware, provided as a standalone computer software product, embedded in flash memory, or stored on magnetic or other media, is licensed solely for use with or as an integral part of the Product and is not sold. If accompanied by a separate end user license agreement ("EULA"), use of any such software will be subject to the terms of such end user license agreement (including any differing limited warranty terms, exclusions and limitations), which shall control over the terms and conditions set forth in this limited warranty. Software Fixes During the limited warranty period you will be entitled to receive such Fixes to the Product software that Trimble releases and makes commercially available and for which it does not charge separately, subject to the procedures for delivery to purchasers of Trimble products generally. If you have purchased the Product from an authorized Trimble dealer rather than from Trimble directly, Trimble may, at its option, forward the software Fix to the Trimble dealer for final distribution to you. Minor Updates, Major Upgrades, new products, or substantially new software releases, as identified by Trimble, are expressly excluded from this update process and limited warranty. Receipt of software Fixes or other enhancements shall not serve to extend the limited warranty period. For purposes of this warranty the following definitions shall apply: (1) "Fix(es)" means an error correction or other update created to fix a previous software version that does not substantially conform to its Trimble specifications; (2) "Minor Update" occurs when enhancements are made to current features in a software program; and (3) "Major Upgrade" occurs when significant new features are added to software, or when a new product containing new features replaces the further development of a current product line. Trimble reserves the right to determine, in its sole discretion, what constitutes a Fix, Minor Update, or Major Upgrade. Warranty Remedies If the Trimble Product fails during the warranty period for reasons covered by this limited warranty and you notify Trimble of such failure during the warranty period, Trimble will repair OR replace the nonconforming Product with new, equivalent to new, or reconditioned parts or Product, OR refund the Product purchase price paid by you, at Trimble’s option, upon your return of the Product in accordance with Trimble's product return procedures then in effect. How to Obtain Warranty Service To obtain warranty service for the Product, please contact your Trimble dealer. Alternatively, you may contact Trimble to request warranty service at +1-408-481-6940 (24 hours a day) or e-mail your request to [email protected]. Please be prepared to provide: – your name, address, and telephone numbers; – proof of purchase; – a copy of this Trimble warranty – a description of the nonconforming Product including the model number ; and – an explanation of the problem. The customer service representative may need additional information from you depending on the nature of the problem. Warranty Exclusions and Disclaimer This Product limited warranty shall only apply in the event and to the extent that (i) the Product is properly and correctly installed, configured, interfaced, maintained, stored, and operated in accordance with Trimble's applicable operator's manual and specifications, and; (ii) the Product is not modified or misused. This Product limited warranty shall not apply to, and Trimble shall not be responsible for, defects or performance problems resulting from (i) the combination or utilization of the Product with hardware or software products, information, data, systems, interfaces, or devices not made, supplied, or specified by Trimble; (ii) the operation of the Product under any specification other than, or in addition to, Trimble's standard specifications for its products; (iii) the unauthorized installation, modification, or use of the Prod…

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 April 14, 2007 RE: Trimble Navigation Ltd. FCC ID: JUP69991 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please provide a block diagram specific to the WiFi and the Bluetooth devices. It would be welcomed if these were two separate files. 2.) Please indicate from the internal photographs where is the Bluetooth device and it’s antenna, and the WiFi device and it’s antenna. 3.) Under what authority does Greg Wallace speak for Trimble Navigation? The FCC database does not know this person. 4.) Since the FCC logo appears on this device, it is assumed that this device will qualify as a Computer Peripheral and subject to the terms associated with Declaration of Authority. In what country was this device tested for Part 15B radiated emissions? 5.) The Manual on page 2 seems to suggest that only the Bluetooth radio is responsible for radio frequency radiation. Since the WiFi device is nearly 40 times more powerful, shouldn’t this be revised? 6.) Is it possible to have the Bluetooth and WiFi devices transmit simultaneously? It is unclear from the Manual is this is possible. 7.) When configuring this device to work in different countries, what WiFi channels become available? 8.) Since this device is capable of connection to a computer, shouldn’t a computer be part of the test setup of both radiated and conducted emissions for Part 15B and 15C? 9.) Channel Power measurements are typically not sufficient in accuracy for RF power measurement whenever SAR is involved. Please provide measurements with sufficient absolute accuracy (5-10%) to meet FCC requirements for SAR testing. Please refer to test instrument manufacturer’s specifications. 10.) Please provide evidence that all data rates were checked for highest peak RF Pout in both 802.11b and 802.11g modes. 11.) Please name the data rates used and shown for the radiated restricted band edge test. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. z Page 2 April 14, 2007 Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Report No.: 072L108-RFUSP05V01 Page : 1 of 22 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

Trimble Navigation Limited. FCC ID.: JUP69991 935 Stewart Drive PO Box 3642 Sunnyvale, CA 94088-3642 United States Tel : +1 408 481-7064 FCC ID Label The FCC ID Label will be placed on the equipment as shown in the photograph below.

Report No.: 072L108-RFUSP05V01 Page : 2 of 22 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 3 of 22 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 4 of 22 Version:1.0 (7) EUT Photo (8) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 5 of 22 Version:1.0 (9) EUT Photo (10) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 6 of 22 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 7 of 22 Version:1.0 (13) EUT Photo (14) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 8 of 22 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 9 of 22 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 10 of 22 Version:1.0 (19) EUT Photo (20) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 11 of 22 Version:1.0 (21) EUT Photo (22) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 12 of 22 Version:1.0 (23) EUT Photo (24) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 13 of 22 Version:1.0 (25) EUT Photo (26) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 14 of 22 Version:1.0 (27) EUT Photo (28) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 15 of 22 Version:1.0 (29) EUT Photo (30) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 16 of 22 Version:1.0 (31) EUT Photo (32) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 17 of 22 Version:1.0 (33) EUT Photo (34) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 18 of 22 Version:1.0 (35) EUT Photo (36) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 19 of 22 Version:1.0 (37) EUT Photo (38) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 20 of 22 Version:1.0 (39) EUT Photo (40) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 21 of 22 Version:1.0 (41) EUT Photo (42) EUT Photo Report No.: 072L108-RFUSP05V01 Page : 22 of 22 Version:1.0 (43) EUT Photo

Report No. 072L108-RFUSP05V01 Page: 6 of 61 Version:1.0 1.2. Operational Description The EUT is a Juno ST with a built-in 2.4GHz transceiver. There are 11 channels in 2412 – 2462MHz. The channels are separated by 5MHz. This device supports the data rates of 1, 2, 5.5, 11Mbps in 802.11b mode and 6, 9, 12, 18, 24, 36, 48, 54Mbps in 802.11g mode. The signals are modulated by DSSS in 802.11b mode and OFDM in 802.11g mode. The antenna type is PIFA.

Report No：072L108-HPUSP09V01 Page: 1 of 22 Version:1.0 SAR Test Report Product Name ：Juno ST Model No. ：69991-XX (X can be 0-9) Applicant ： Trimble Navigation Limited. Address ： 935 Stewart Drive PO Box 3642 Sunnyvale, CA 94088-3642 United States Date of Receipt ：2007/02/15 Issued Date ：2007/03/16 Report No. ：072L108-HPUSP09V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No：072L108-HPUSP09V01 Page: 2 of 22 Version:1.0 Test Report Certification Issued Date: 2007/03/16 Report No.: 072L108-HPUSP09V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Product Name ： Juno ST Applicant ： Trimble Navigation Limited. Address ： 935 Stewart Drive PO Box 3642 Sunnyvale, CA 94088-3642 United States Manufacturer ： LITE-ON TECHNOLOGY CORPORATION Model No. ： 69991-XX (X can be 0-9) Trade Name ： Trimble Applicable Standard ： FCC Oet65 Supplement C June 2001 Test Result ： Max. SAR Measurement (1g) 802.11b: 0.553 W/kg 802.11g: 0.317 W/kg Application Type Certification Documented By ： (Engineering Adm. Assistant / Eva Huang) Tested By ： (Senior Engineer / Shine Hsu) Approved By ： (President / Gene Chang) Report No：072L108-HPUSP09V01 Page: 3 of 22 Version:1.0 TABLE OF CONTENTS Description Page 1. General Information.............................................................................. 5 1.1 EUT Description ............................................................................................................5 1.2 Test Environment ...........................................................................................................5 2. SAR Measurement System .................................................................. 6 2.1 ALSAS-10U System Description .................................................................................. 6 2.1.1 Applications ................................................................................................................ 6 2.1.2 Area Scans................................................................................................................... 6 2.1.3 Zoom Scan (Cube Scan Averaging)............................................................................ 7 2.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty......................................... 7 2.2 Isotropic E-Field Probe .................................................................................................. 7 2.2.1 Isotropic E-Field Probe Specification ......................................................................... 9 2.3 Boundary Detection Unit and Probe Mounting Device ................................................. 9 2.4 Daq-Paq (Analog to Digital Electronics) ..................................................................... 10 2.5 Axis Articulated Robot ................................................................................................ 10 2.6 ALSAS Universal Workstation.................................................................................... 11 2.7 Universal Device Positioner......................................................................................... 11 2.8 Phantom Types............................................................................................................. 11 2.8.1 APREL SAM Phantoms ........................................................................................... 12 2.8.2 APREL Laboratories Universal Phantom ................................................................. 12 3. Tissue Simulating Liquid ................................................................... 13 3.1 The composition of the tissue simulating liquid .......................................................... 13 3.2 Tissue Calibration Result ............................................................................................. 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ....................................... 14 4. SAR Measurement Procedure ........................................................... 15 4.1 SAR System Validation................................................................................................ 15 4.1.1 Validation Dipoles..................................................................................................... 15 4.1.2 Validation Result ....................................................................................................... 15 4.2 SAR Measurement Procedure ...................................................................................... 16 5. SAR Exposure Limits ......................................................................... 17 6. Test Equipment List............................................................................ 18 7. Measurement Uncertainty .................................................................. 19 8. Test Results ......................................................................................... 20 Report No：072L108-HPUSP09V01 Page: 4 of 22 Version:1.0 8.1 SAR Test Results Summary ......................................................................................... 20 Appendix A. SAR System Validation Data........................................................................ 22 Appendix B. SAR measurement Data................................................................................ 22 Appendix C. Test Setup Photographs & EUT Photographs............................................... 22 Appendix D. Probe Calibration Data ................................................................................. 22 Appendix E. Dipole Calibration Data ................................................................................ 22 Report No：072L108-HPUSP09V01 Page: 5 of 22 Version:1.0 1. General Information 1.1 EUT Description Product Name…

Text truncated - open the document above for the full version.

Report No. 072L108-RFUSP05V01 Page: 1 of 57 Version:1.0 Test Report Product Name Juno ST Model No. 69991-XX (X can be 0-9) FCC ID JUP69991 Applicant Trimble Navigation Limited. Address 935 Stewart Drive PO Box 3642 Sunnyvale, CA 94088-3642 United States Date of Receipt Feb. 15, 2007 Issued Date March 20, 2007 Report No. 072L108-RFUSP05V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 072L108-RFUSP05V01 Page: 2 of 57 Version:1.0 Test Report Certification Issued Date: March 20, 2007 Report No.: 072L108-RFUSP05V01 Test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Product Name Juno ST Applicant Trimble Navigation Limited. Address 935 Stewart Drive PO Box 3642 Sunnyvale, CA 94088-3642 United States Manufacturer LITE-ON TECHNOLOGY CORPORATION Model No. 69991-XX (X can be 0-9) Rated Voltage AC 120V/60Hz Working Voltage AC 120V/60Hz Trade Name Trimble Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2006 ANSI C63.4: 2003 Test Result Complied Documented By : ( Engineering Adm. Specialist / Rita Huang ) Tested By : ( Engineer / D i n o C h e n ) Approved By : ( President / Gene Chang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200533-0 0914 Report No. 072L108-RFUSP05V01 Page: 3 of 57 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................6 1.3. Tested System Datails....................................................................................................................7 1.4. Configuration of Test System ........................................................................................................7 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................10 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................16 3.1. Test Equipment............................................................................................................................16 3.2. Test Setup ....................................................................................................................................16 3.3. Limits ..........................................................................................................................................16 3.4. Uncertainty ..................................................................................................................................16 3.5. Test Result of Peak Power Output...............................................................................................17 4. Radiated Emission .....................................................................................................................19 4.1. Test Equipment............................................................................................................................19 4.2. Test Setup ....................................................................................................................................20 4.3. Limits ..........................................................................................................................................20 4.4. Test Procedure .............................................................................................................................21 4.5. Uncertainty ..................................................................................................................................21 4.6. Test Result of Radiated Emission................................................................................................22 5. Band Edge ..................................................................................................................................30 Report No. 072L108-RFUSP05V01 Page: 4 of 57 Version:1.0 5.1. Test Equipment............................................................................................................................30 5.2. Test Setup ...........................................…

Text truncated - open the document above for the full version.

Report No.: 072L108-RFUSP05V01 Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 072L108-RFUSP05V01 Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 072L108-RFUSP05V01 Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)