K3Y-24SX-001point to multipoint - SUB

11717 Exploration Lane, Germantown, MD 20876 Tel: (301) 428–5500 Fax: (301) 428 –1868/2830 1027144– 0001 Revision D March 1, 2000 Remote Terminal Installation and User Manual 1027144– 0001 Revision Dii For important standards compliance information, see appendix B. Copyright 1999–2000 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trademarks AIReach is a trademark of Hughes Network Systems. Other trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein. 1027144– 0001 Revision Diii RT installation Contents About this manual vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety information ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation summary 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Remote terminal (RT) reference drawing 1–2. . . . . . . . . . . . . . . . . . . . . 1.2 Installation summary and checklist 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Review site data and plans 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Plan ahead for building access 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Tools needed for installation 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Specialized materials 2–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 Prerequisites for commissioning 2–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing indoor RT equipment 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Rack grounding 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Installing IDUs 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Power supplies 3–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Installing the CCM 3–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 SSIs 3–27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Installing expansion IDUs (EIDUs) 3–34. . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing IFL cables 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Handling materials 4–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 IFL cable specifications 4–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Overview: IFL plan 4–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Determining the IFL cable route 4–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Penetrating the roof 4–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Installing the penetration sleeve 4–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Installing the IFL cable inside the building 4–8. . . . . . . . . . . . . . . . . . . . 4.8 Installing the RT lightning arrestor 4–9. . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Installing the IFL cable on the roof 4–13. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing mast mounts 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Overview 5–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 ODU location 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Roof types 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Mast mount types 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Standard nonpenetrating mount 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Using existing structures as ODU mounts 5–11. . . . . . . . . . . . . . . . . . . . 1027144– 0001 Revision Div RT installation 6 Installing ODUs 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Introduction 6–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Transporting the ODU to the roof 6–4. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Preparing to install the antenna mount 6–5. . . . . . . . . . . . . . . . . . . . . . . 6.4 Installing the antenna mount 6–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 Attaching the antenna to the mount 6–10. . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 Initial (coarse) antenna azimuth adjustment 6–14. . . . . . . . . . . . . . . . . . . 6.7 Initial (coarse) antenna elevation adjustment 6–17. . . . . . . . . . . . . . . . . . 6.8 Installing a mechanical attenuator 6–19. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.9 Attaching the transceiver to the antenna 6–21. . . . . . . . . . . . . . . . . . . . . . 6.10 Grounding the ODU…

Text truncated - open the document above for the full version.

EXHIBIT 3 MANUFACTURING AND PRODUCT INFORMATION

Corporate O ffices 11717 Exploration Lane Germantown, MD 20876 Tel: (301) 428-5500 TWX: (710) 828-0541 Fax: (301) 428-1868/2830 Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 4/11/2000 FCC ID: K3Y-24SX-001 Dear Mr. Coperich Enclosed with this letter is our application for Certification of the radio system K3Y-24SX-001 Point to Multipoint described herein operating in the DEMS 24 GHz band. The above system has passed the proposed new mask outlined in the FCC NPRM Docket # 99-327 adopted November 4, 1999 and released November 10, 1999 and Erratum to the same rulemaking released December 23, 1999. Our system however has passed all the FCC Part 101 current requirements except for FCC Part 101.111 emission limits section. Based on our discussion with Mr. Michael Pollak from FCC DC Office on March 30 th , 2000, it has been agreed that a waiver for the current emission mask will be granted to Hughes Networks Systems under the condition that we pass the new proposed FCC emission limits. Therefore Hughes Networks Systems is asking for a waiver to operate their product in the 24 GHz DEMS service band. A similar waiver has been granted to NORTEL/TELIGENT to operate their product in the DEMS band. The Files have been submitted electronically to the Federal Communications Commission Laboratory If you have any further questions, please feel free to call me. Rega rds John Rymkiewicz Technical Ma nager Hughes Network Systems

1 Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 April 11, 2000 RE: C ONF IDENT IA LIT Y REQ UEST FC C ID: K3Y-24SX-001 Dear Mr. Coperich This letter provides Confidentiality Request and Antenna Gain used in HUB unit. 1. Confidentiality Request The part of the above application has been requested confidentiality. The reason for this is that two exhibits (EXHIBIT 5 & EXHIBIT 8) contain detailed schematics that could lead to technology patent disclosure. The technology is very new and therefore all precautions have to be taken to keep this information confidential from public access. 2. Antenna Gain used in HUB unit As a HUB antenna we will be using three different antennas: • 90° 16 dBi • 45° 19 dBi • 22.5° 22 dBi Thank you, for accepting our request. Rega rds John Rymkiewicz Technical Ma nager Hughes Network Systems

EXHIBIT 4 EXTERNAL PHOTOS Figure 1 Front View Figure 2 ODU and Antenna - Front View Figure 3 ODU and IDU – Front View

EXHIBIT 1 IDU & ODU LABELS Thi s device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: POWER DOWN ODU BEFORE CONNECTING OR DISCONNECT ING IF 1026128-0008 S/N: Rev: FCC ID: K3Y-24SX-001 PRODUCT AIReach Broadband IDU 1026356 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment shall be installed i n accordance w ith t he HNS i nstal lati on manual, only in restricted access areas in business and customer premises applications in accordance with articles 110-16, 110-17, and 110-18 of the National Electric Code ANSI/NFPA No. 70. LISTED ITE 4N11 ® C US FCC ID: K3Y-38HL-001 K3Y-38SL-001 K3Y-38HH-001 K3Y-38SH- 001 K3Y-24HX- 001 K3Y-24SX-001

EXHIBIT 2 COMPANY NAME AND MAILING ADDRESS COMPANY NAME AND MAILING ADDRESS: Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 Telephone Number: (301) 428 – 5500 Fax Number:(301) 428 – 2880

EXHIBIT 10 INTERNAL PHOTOS

DateRevRevision RecordApproved 2/1/20000.9Test planJR 4/1/20001Test Report ReleasedJR PMP RF Type Acceptance Test Plan and Report For 24 GHz SUB ODU Prepared for Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 JobApprovalsDate Originator:S. Albanna4/1/2000 Hughes Network Systems Approved:J. Rymkiewicz4/1/2000 Checked: Title: PMP RF Type Acceptance Test Plan and Report For 24 GHz SUB ODU Sheet 1 of 66 CAGE No. 52571 No. 1029004 Form E75This document created in Microsoft Word Hughes Proprietary II Copyright © 2000 Hughes Network Systems Notice of Proprietary Information This document and its contents are proprietary to Hughes Network Systems and are i ntended solely for the i nternal use of Hughes Network Systems. This publication and its contents may not be reproduced or distributed for any other purpose witho ut the writte n pe rmission o f Hug hes Network Sys tems . Hughes Proprietary II No. 1029003 Rev.1 Sheet 2 of 58 Form E75aHughes Network Systems TABLE OF CONTENTS 1.0 OVERVIEW.........................................................................................................................................................................6 1.1 P RODUC T D ESCRIPTION ......................................................................................................................................................6 1.2 C HANNELIZATION ...............................................................................................................................................................8 1.3 A PPLIC ABLE S TANDARDS ...................................................................................................................................................9 1.4 R EF EREN CE D O CUMEN TS .................................................................................................................................................10 2.0 SETUP.................................................................................................................................................................................11 2.1 E QUIPMENT LIST ...............................................................................................................................................................11 2.2 T ES T S ETUPS .....................................................................................................................................................................13 3.0 TRANSMITTER TESTS ..................................................................................................................................................15 3.1 T HE O UTP UT P OWER ........................................................................................................................................................15 3.1.1 Performance Specifications......................................................................................................................................15 3.1.2 Test Procedures ........................................................................................................................................................15 3.1.3 Test Configuration....................................................................................................................................................15 3.1.4 Test Results ...............................................................................................................................................................16 3.2 M ICROW AVE M ODULATION: ........................................................................................................................................18 3.3 O CCUPIED B ANDWI DTH ....................................................................................................................................................19 3.3.1 Performance Specifications and Mask Determination.............................................................................................19 3.3.2 Test Procedures ........................................................................................................................................................25 3.3.3 Test Configuration....................................................................................................................................................25 3.3.4 Test Results ...............................................................................................................................................................25 3.4 C ONDUCTED S PURIOUS E MISSIONS FROM THE T RANSMITTER ..........................................................................................33 3.4.1 Performance Specifications......................................................................................................................................33 3.4.2 Test Configuration....................................................................................................................................................37 3.4.3 Test Results ...............................................................................................................................................................38 3.4.3.1 Test results (30Mhz-24GHz) Channel 35A ............................................................................................................... 39 3.4.3.2 Test results 25Ghz- 40Ghz channel 39 C.................................................................................................................. 39 3.4.3.3 DEMS band Conducted Emission........................................................................................................................... 40 3.4.3.4 Conducted Emission for 40-60 GHz......................................................................................................................... 42 3.4.3.5 Conducted Emission 60-90 GHz.............................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT 7 TEST SETUP PHOTOS Figure 1 Conducted Spurious Emissions – Test setup Figure 2 Radiated Spurious Emissions – Test setup