K3YHNS9450Land Mobile Terminal

Hughes 9400 Series User Guide P/N 3004128 Revision 1 Copyright © 2010 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, LLC. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, LLC, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems, LLC has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems, LLC shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems, LLC makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trademarks Hughes, HughesNet, Hughes Network Systems, and SPACEWAY are trademarks of Hughes Network Systems, LLC. All other trademarks are the property of their respective owners. INMARSAT is a trademark of the International Mobile Satellite Organization. The Inmarsat LOGO and the trademark BGAN are trademarks of Inmarsat (IP) Company limited. All trademarks are licensed to Inmarsat Limited. Hughes 9350 BGAN Terminal User Guide i SAFETY INFORMATION For your safety and protection, read this entire user manual before you attempt to use the Broadband Global Area Network (BGAN) Land Mobile Satellite Terminal. In particular, read this safety section carefully. Keep this safety information where you can refer to it if necessary. WARNING SYMBOLS USED IN THIS MANUAL WARNING Potential Radio Frequency (RF) hazard. Where you see this alert symbol and WARNING heading, strictly follow the warning instructions to avoid injury to eyes or other personal injury. WARNING Where you see this alert symbol and WARNING heading, strictly follow the warning instructions to avoid personal injury. DANGER Electric shock hazard: Where you see this alert symbol and DANGER heading, strictly follow the warning instructions to avoid electric shock injury or death. WARNINGS FOR SATELLITE TERMINAL DO NOT STAND IN FRONT OF THE ANTENNA This device emits radio frequency energy. To avoid injury, do not place head or other body parts in front of the satellite antenna when system is operational. Maintain a distance of one meter or more from the front of the Satellite Terminal antenna. ii Hughes 9350 BGAN Terminal User Guide GENERAL Handle your Satellite Terminal with care. The outdoor unit is weather resistant per IEC 60529 IP56; however, do not submerge either unit. Avoid exposing your Satellite Terminal to extreme hot or cold temperatures outside the range -25ºC to +55ºC. Avoid placing the Terminal close to cigarettes, open flames or any source of heat. Changes or modifications to the Terminal not expressly approved by Hughes Network Systems could void your authority to operate this equipment. Only use a soft damp cloth to clean the Terminal. To avoid impaired Terminal performance, please ensure the unit’s antenna is not damaged or covered with foreign material like paint or labeling. When inserting the USIM/SIM, do not bend it or damage the contacts in any way. When connecting the interface cables, do not use excessive force. IN THE VICINITY OF BLASTING WORK AND IN EXPLOSIVE ENVIRONMENTS Never use the Satellite Terminal where blasting work is in progress. Observe all restrictions and follow any regulations or rules. Areas with a potentially explosive environment are often, but not always, clearly marked. Do not use the Terminal while at a petrol filling station. Do not use near fuel or chemicals. QUALIFIED SERVICE Do not attempt to disassemble your Satellite Terminal. The unit does not contain consumer-serviceable components. Only qualified service personnel may install or repair equipment. ACCESSORIES Use Hughes approved accessories only. Use of non-approved accessories may result in loss of performance, damage to the Satellite Terminal, fire, electric shock or injury. CONNECTING DEVICES Never connect incompatible devices to the Satellite Terminal. When connecting the Satellite Terminal to any other device, read the device’s User Manual for detailed safety instructions. Hughes 9350 BGAN Terminal User Guide iii PACEMAKERS The various brands and models of cardiac pacemakers available exhibit a wide range of immunity levels to radio signals. Therefore, people who wear a cardiac pacemaker and who want to use a Satellite Terminal should seek the advice of their cardiologist. If, as a pacemaker user, you are still concerned about interaction with the Satellite Terminal, we suggest you follow these guidelines: • Maintain a distance of 20cm from the Wi-Fi antenna and your pacemaker: • Maintain a distance of one meter from the main antenna front and sides and your pacemaker; • Refer to your pacemaker product literature for information on your particular device. If you have any reason to suspect that interference is taking place, turn off your Satellite Terminal immediately. HEARING AIDS Most new models of hearing aids are immune to radio frequency interference from Satellite Terminals that are more than 2 meters away. Many types of older hearing aids may be susceptible to interference, making it very difficult to use them near a Terminal. Should interference be experienced, maintain additional separation between you and the Satellite Terminal. ELECTRICAL STORMS Operation of the Satellite Terminal during electrical storms may result in severe personal injury or death. Ensure the Below Deck Equipment is properly grounded to the vehicle chassis. iv Hughes 9350 BGAN Terminal User Guide CONTENTS SAFETY INFORMATION _____________________________________________ I Warning Symbols Used in this Manual .................................................... i Warnings for Satellite Terminal ................................................................ i CONTENTS ___________________________________…

Text truncated - open the document above for the full version.

Hughes 9450 Land Mobile Terminal 1 9450 Top side 9450 Under side Hughes 9450 Land Mobile Terminal 2 9450 Front side 9450 Rear side Hughes 9450 Land Mobile Terminal 3 9450 Left side 9450 Right side

Date Rev Revision Record Approved 1/27/10 1 Initial Release 03/29/10 2 Update 06/8/10 A Production Release 08/05/10 B ECN 70261 Job Approvals Date Originator: Ryu Kafka 6/8/2010 Hughes Network Systems Approved: Bill Lindsay 6/8/2010 Checked: Nigel Bartlett 6/8/2010 Title: Marking Specification 9400 Series Marking Specification Type 206 Sheet 1 of 13 CAGE No. 3L0W2 No. 3500475 Form E75 This document created in Microsoft Word Hughes Proprietary Copyright © 2010 Hughes Network Systems Notice of Proprietary Information This document and its contents are proprietary to Hughes Network Systems and are intended solely for the internal use of Hughes Network Systems. This publication and its contents may not be reproduced or distributed for any other purpose without the written permission of Hughes Network Systems. No. 3500475 Hughes Proprietary Rev. B Sheet 2 of 13 Form E75a Hughes Network Systems TABLE OF CONTENTS Section Page 1.0 INTRODUCTION........................................................................................................................... 4 1.1 OVERVIEW ................................................................................................................................... 4 1.2 REVISION HISTORY .................................................................................................................... 4 2.0 GENERAL .................................................................................................................................... 5 2.1 MARKINGS ................................................................................................................................... 5 2.2 FONT ............................................................................................................................................ 5 2.3 IMEI DEFINITION (PRODUCTION) .............................................................................................. 5 2.4 IMEI DEFINITION (PRE-PRODUCTION) ...................................................................................... 5 2.5 SERIAL NUMBER ......................................................................................................................... 5 2.6 LABEL CONTENTS ...................................................................................................................... 6 2.6.1 94x0 Radio Assembly IDU Product Variants ............................................................................................................. 6 2.6.2 94x0 Chassis Label ..................................................................................................................................................... 6 2.6.3 94x0 Radio Assembly Carton Label Contents ........................................................................................................... 6 2.6.4 Kit Product Variants ................................................................................................................................................... 7 2.6.5 94x0-xx Over-pack Carton Label Contents ................................................................................................................ 8 2.6.6 Labels ......................................................................................................................................................................... 9 No. 3500475 Hughes Proprietary Rev. B Sheet 3 of 13 Form E75a Hughes Network Systems TABLE OF FIGURES Figure 1-1: 94x0-xx Kit breakdown ............................................................................................................................................... 4 Figure 2-1 Artwork 3500475-0040 ................................................................................................................................................ 9 Figure 2-2 Artwork 3500475-0041 ................................................................................................................................................ 9 Figure 2-3 Placement of Chassis Label ........................................................................................................................................ 10 Figure 2-4 Artwork 3500475-0042 .............................................................................................................................................. 11 Figure 2-5 Artwork 3500475-0043 .............................................................................................................................................. 11 Figure 2-6 Artwork 3500475-0044 .............................................................................................................................................. 12 Figure 2-7 Artwork 3500475-0045 .............................................................................................................................................. 12 Figure 2-8 Artwork 3500475-0046 .............................................................................................................................................. 13 Figure 2-9 Artwork 3500475-0047 .............................................................................................................................................. 13 No. 3500475 Hughes Proprietary Rev. B Sheet 4 of 13 Form E75a Hughes Network Systems 1.0 INTRODUCTION 1.1 OVERVIEW This document describes and defines the label specifications for the BGAN-X 9400 Series terminals. The 94x0 is the radio assembly indoor unit (IDU) and the 94x0-xx includes both the 94x0 radio assembly indoor unit and a SpaceCom Class 10 or 11 land mobile tracking antenna outdoor unit (ODU). The 94x0 radio assembly IDU can be one of several variants, each supporting a different set of interfaces. The variant is specified by the MCN “dash” number which is defined in this document. The radio assembly and antenna each have their own carton and are then over packed into a bigger box. The radio assembly product includes a core module…

Text truncated - open the document above for the full version.

Hughes 9450 Land Mobile Terminal 1 9450 Interface board with Core Module installed – Top side 9450 Interface board without Core Module – Top side Hughes 9450 Land Mobile Terminal 2 9450 Interface board – Under side Hughes 9450 Land Mobile Terminal 3 Core Module Shield - Top side Core Module Shield - Under side Hughes 9450 Land Mobile Terminal 4 Core Module – Top side without WLAN card Core Module – Under side Hughes 9450 Land Mobile Terminal 5 Core Module Topside – with WLAN Card installed WLAN card – Top side WLAN card – Under side WLAN card – no shield

Evaluation of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power --Conducted 13.08 dBm 0.020 (W) Antenna gain(typical): 3.00 (dBi) Maximum antenna gain: 2.00 (numeric) Evaluation distance: 20.00 (cm) Evaluation frequency: 2412.000 (MHz) Limit from table below: 1 (mW/cm^2) Power density at Evaluation frequency: 0.0081 (mW/cm^2) EUT complies 2 4 R PG S π =

Nemko USA, Inc. 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Phone (858) 755-5525 Fax (858) 452-1810 CERTIFICATION TEST REPORT P ART 15.247C For The Land Mobile Terminal Model: 9450 FCC ID: K3YHNS9450 PREPARED FOR: Hughes Network Systems 9605 Scranton Road Suite 500 San Diego, CA 92121 Prepared on: July 20, 2010 Report Number: 2010 06149531 FCC Project Number: 42995-1 NEx Number: 149531 Total Pages: 35 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE July 20, 2010 9450 Certification Test Report FCC ID: K3YHNS9450 2010 06149531 FCC 2 of 35 DOCUMENT HISTORY REVISION DATE COMMENTS - June 20, 2010 Prepared By: Alan Laudani - June 20, 2010 Initial Release: Alan Laudani NOTE: Nemko USA, Inc. hereby makes the following statements so as to conform to Chapter 10 (Test Reports) Requirements of ANSI C63.4 (2003) “Methods and Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz”: o The unit described in this report was received at Nemko USA, Inc.'s facilities on June 7, 2010. o Testing was performed on the unit described in this report on June 8, 2010 to July 20, 2009 o The Test Results reported herein apply only to the Unit actually tested, and to substantially identical Units. o This report does not imply the endorsement of the Federal Communications Commission (FCC), Industry Canada, NVLAP or any other government agency. This Report is the property of Nemko USA, Inc., and shall not be reproduced, except in full, without prior written approval of Nemko USA, Inc. However, all ownership rights are hereby returned unconditionally to Hughes Network Systems, and approval is hereby granted to Hughes Network Systems, and its employees and agents to reproduce all or part of this report for any legitimate business purpose without further reference to Nemko USA, Inc. Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 DATE DOCUMENT NAME DOCUMENT # PAGE July 20, 2010 9450 Certification Test Report FCC ID: K3YHNS9450 2010 06149531 FCC 3 of 35 TABLE OF CONTENTS DOCUMENT HISTORY.....................................................................................................................................2 CERTIFICATION................................................................................................................................................4 1. ADMINISTRATIVE DATA AND TEST SUMMARY..........................................................................5 1.1. ADMINISTRATIVE DATA............................................................................................................................5 2. TEST SUMMARY ....................................................................................................................................6 3. SYSTEM CONFIGURATION.................................................................................................................7 3.1. DESCRIPTION AND METHOD OF EXERCISING THE EUT..............................................................................7 3.2. SYSTEM COMPONENTS AND POWER CABLES.............................................................................................8 3.3. DEVICE INTERCONNECTION AND I/O CABLES...........................................................................................9 3.4. DESIGN MODIFICATIONS FOR COMPLIANCE..............................................................................................9 3.5. TECHNICAL SPECIFICATIONS OF THE EUT...............................................................................................10 4. DESCRIPTION OF TEST SITE AND ENVIRONMENT ..................................................................11 4.1. DESCRIPTION OF TEST SITE.....................................................................................................................11 4.2. DEVIATIONS FROM LABORATORY TEST PROCEDURES............................................................................11 4.3. MODIFICATIONS PERFORMED DURING ASSESSMENT...............................................................................11 4.4. RECORD OF TECHNICAL JUDGEMENTS....................................................................................................11 4.5. EUT PARAMETERS AFFECTING COMPLIANCE.........................................................................................11 4.6. TEST DELETED........................................................................................................................................11 4.7. ADDITIONAL OBSERVATIONS..................................................................................................................11 4.8. TEST ENVIRONMENT...............................................................................................................................11 5. DESCRIPTION OF TESTING METHODS.........................................................................................12 5.1. INTRODUCTION........................................................................................................................................12 5.2. CONFIGURATION AND METHODS OF MEASUREMENTS FOR CONDUCTED EMISSIONS...............................12 5.3. CONFIGURATION AND METHODS OF MEASUREMENTS FOR FREQUENCY IDENTIFICATION.......................12 5.4. CONFIGURATION AND METHODS OF MEASUREMENTS FOR RADIATED EMISSIONS..................................13 6. TEST RESULTS......................................................................................................................................14 6.1. CONDUCTED EMISSIONS..........................................................................................................................14 6.2. RECEIVER SPURIOUS EMISSION.....................................................................................…

Text truncated - open the document above for the full version.