K3Y-38HH-001Point to multipoint - HUB

11717 Exploration Lane, Germantown, MD 20876 Tel: (301) 428–5500 Fax: (301) 428 –1868/2830 1027145 – 0001 Revision D December 17, 1999 Hub Installation and User Manual 1027145 – 0001 Revision DiiHub installation For important standards compliance information, see appendix B. Copyright 1999 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trademarks AIReach is a trademark of Hughes Network Systems. Other trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein. 1027145 – 0001 Revision DiiiHub installation Contents About this manual vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety information ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation summary 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Hub reference drawing 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Installation summary and checklist 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Reviewing site data and plans 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Planning ahead for building access 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Tools needed for installation 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Prerequisites for commissioning 2–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing mast mounts 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Overview 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Roof and ladder safety 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Mount location 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Handling materials 3–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 Roof types 3–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Mast mount types 3–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 Standard nonpenetrating mount 3–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 Using existing structures as ODU mounts 3–13. . . . . . . . . . . . . . . . . . . . 4 Installing ODUs 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Introduction 4–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Transporting the ODU 4–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Determining the HT alignment direction 4–6. . . . . . . . . . . . . . . . . . . . . 4.4 ODU installation and alignment tools 4–10. . . . . . . . . . . . . . . . . . . . . . . . 4.5 Installing the temporary collar 4–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Installing the antenna mount 4–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Attaching the antenna to the mount 4–17. . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 Adjusting the antenna azimuth 4–20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Adjusting the antenna elevation 4–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 Attaching the transceiver to the antenna 4–27. . . . . . . . . . . . . . . . . . . . . . 4.11 Grounding the ODU 4–30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1027145 – 0001 Revision DivHub installation 5 Installing IFL cables 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 IFL cable specifications 5–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Overview: IFL plan 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Determining the IFL cable route 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Penetrating the roof 5–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Installing the penetration sleeve 5–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Installing the IFL cable inside the building 5–7. . . . . . . . . . . . . . . . . . . . 5.7 Installing the hub lightning arrestor 5–8. . . . . . . . . . . . . . . . . . . . . . . . . 5.8 Installing the IFL cable on the roof 5–13. . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 Multiple IFL cables 5–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing indoor hub equipment 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Installing the hub rack (optional) 6–2. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Installing IDUs 6–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Power supplies 6–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 Instal…

Text truncated - open the document above for the full version.

11717 Exploration Lane, Germantown, MD 20876 Tel: (301) 428–5500 Fax: (301) 428 –1868/2830 1027145 – 0001 Revision D December 17, 1999 Hub Installation and User Manual 1027145 – 0001 Revision DiiHub installation For important standards compliance information, see appendix B. Copyright 1999 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trademarks AIReach is a trademark of Hughes Network Systems. Other trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein. 1027145 – 0001 Revision DiiiHub installation Contents About this manual vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety information ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation summary 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Hub reference drawing 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Installation summary and checklist 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Reviewing site data and plans 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Planning ahead for building access 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Tools needed for installation 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Prerequisites for commissioning 2–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing mast mounts 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Overview 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Roof and ladder safety 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Mount location 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Handling materials 3–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 Roof types 3–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Mast mount types 3–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 Standard nonpenetrating mount 3–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 Using existing structures as ODU mounts 3–13. . . . . . . . . . . . . . . . . . . . 4 Installing ODUs 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Introduction 4–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Transporting the ODU 4–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Determining the HT alignment direction 4–6. . . . . . . . . . . . . . . . . . . . . 4.4 ODU installation and alignment tools 4–10. . . . . . . . . . . . . . . . . . . . . . . . 4.5 Installing the temporary collar 4–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Installing the antenna mount 4–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Attaching the antenna to the mount 4–17. . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 Adjusting the antenna azimuth 4–20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Adjusting the antenna elevation 4–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 Attaching the transceiver to the antenna 4–27. . . . . . . . . . . . . . . . . . . . . . 4.11 Grounding the ODU 4–30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1027145 – 0001 Revision DivHub installation 5 Installing IFL cables 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 IFL cable specifications 5–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Overview: IFL plan 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Determining the IFL cable route 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Penetrating the roof 5–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Installing the penetration sleeve 5–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Installing the IFL cable inside the building 5–7. . . . . . . . . . . . . . . . . . . . 5.7 Installing the hub lightning arrestor 5–8. . . . . . . . . . . . . . . . . . . . . . . . . 5.8 Installing the IFL cable on the roof 5–13. . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 Multiple IFL cables 5–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing indoor hub equipment 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Installing the hub rack (optional) 6–2. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Installing IDUs 6–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Power supplies 6–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 Instal…

Text truncated - open the document above for the full version.

EXHIBIT 3 MANUFACTURING AND PRODUCT INFORMATION

1 Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 July 5, 2000 RE: CONFIDENTIALITY REQUEST FCC ID K3Y-38HH-001 Applicant: Hughes Network Systems Correspondence Reference Number: 14865 731 Confirmation Number: EA97765 Date of Original E-Mail: 06/30/2000 Dear Mr. Coperich I would like to address two of the questions that have been requested in your correspondence letter No: 14865dated 06/30/2000. 1. Confidentiality Request The part of the above application has been requested confidentiality. The reason for this is that two exhibits (EXHIBIT 5 & EXHIBIT 8) contain detailed schematics that could lead to technology patent disclosure. The technology is very new and therefore all precautions have to be taken to keep this information confidential from public access. 2. Please explain why the transmit frequency ranges shown on Test Report Pages 8 and 11 do not agree The page 8 was not correct. The Frequency range should be as follows: HUB SUB(High Band SUB unit) Tx (38950 – 39400) MHz HUB HUB(High Band HUB unit) Tx (38650 – 40000) MHz Thank you, for accepting our request. Regards John Rymkiewicz Technical Manager Hughes Network Systems

1 Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 6/1/1999 FCC ID: K3Y-38HH-001 Dear Mr. Coperich Please accept the application for the approval of the K3Y-38HH-001 Point to Multipoint 38 GHz System to the FCC Part 101 Type Acceptance requirements. The system is similar to the previously approved, except for the change to the frequency band. The Files have been submitted electronically to the Federal Communications Commission Laboratory Rega rds John Rymkiewicz

EXHIBIT 4 EXTERNAL PHOTOS Figure 1 Front View1 Figure 2 Front View2 Figure 3 ODU HUB – Open cover Figure 4 ODU and Antenna - Front View Figure 5 ODU and IDU – Front View

EXHIBIT 1 IDU & ODU LABLES This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: POWER DOWN ODU BEFORE CONNECTING OR DISCONNECTING IF 1024668-0010 S/N: Rev: FCC ID: K3Y-38HH-001 AIReach Broadband 38GHz High Hub PRODUCT AIReach Broadband IDU 1026356 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment shall be installed in accordance with the HNS installation manual, only in restricted access areas in business and customer premises applications in accordance with articles 110-16, 110-17, and 110-18 of the National Electric Code ANSI/NFPA No. 70. LIS TED IT E 4N11 ® CUS FCC ID: K3Y-38HL-001 K3Y-38SL-001 K3Y-38HH-001 K3Y-38SH-001 K3Y-24HX-001 K3Y-24SX-001

EXHIBIT 2 COMPANY NAME AND MAILING ADDRESS COMPANY NAME AND MAILING ADDRESS Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 Telephone Number: (301) 428-5500 Fax number: (301) 428-2880

EXHIBIT 9 INT ERNAL PHOT OS Figure 1: Open HUB photo 1 Figure 2: Open HUB photo 2 Figure 1: Open HUB photo 1

EXHIBIT 6 HUB Test plan and Report Hughes Proprietary II No. 1029613 Hughes Proprietary II Rev.1 Sheet 2 of 58 Form E75aHughes Network Systems DateRevRevision Record Approved 12/17/990.9Test planJR 5/15/001Test Report Released JR PMP 39.65 to 40 GHz Agency Certification Test Report For HUB High Band Prepared for Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 Hughes Proprietary II Copyright © 2000 Hughes Network Systems Notice of Proprietary Information This document and its contents are proprietary to Hughes Network Systems and are i ntended solely for the internal use of Hughes Network Systems. This publication and its contents may not be reproduced or distributed for any other purpose without the written permission of Hughes Network Systems. Job: 01040ApprovalsDate Originator: S. Albanna12/17/99 Hughes Network Systems Approved: J. Rymkiewicz5/17/00 Checked: Title: PMP 39.65 to 40 GHz Agency Certification Test Report For HUB High Band Sheet 2 of 1 CAGE No. 52571 No. 1029613 Hughes Proprietary II No. 1029613 Hughes Proprietary II Rev.1 Sheet 3 of 58 Form E75aHughes Network Systems TABLE OF CONTENTS EXHIBIT 6.................................................................................................................................................... 1 1.0 OVERVIEW ........................................................................................................................................ 8 1.1 PRODUCT DESCRIPTION................................................................................................................ 8 1.2 CHANNELIZATION .......................................................................................................................... 10 1.3 APPLICABLE STANDARDS............................................................................................................ 11 1.4 REFERENCE DOCUMENTS........................................................................................................... 12 2.0 SETUP.............................................................................................................................................. 13 2.1 EQUIPMENT LIST ........................................................................................................................... 13 2.2 TEST SETUPS................................................................................................................................. 15 3.0 TRANSMITTER TESTS................................................................................................................... 17 3.1 THE OUTPUT POWER.................................................................................................................... 17 3.1.1 Performance Specifications........................................................................................................ 17 3.1.2 Test Procedures........................................................................................................................ 17 3.1.3 Test Configuration ..................................................................................................................... 18 3.1.4 Test Results.............................................................................................................................. 18 3.2 OCCUPIED BANDWIDTH............................................................................................................... 24 3.2.1 Performance Specifications........................................................................................................ 24 3.2.2 Test Procedures........................................................................................................................ 24 3.2.3 Test Configuration ..................................................................................................................... 25 3.2.4 Test Results.............................................................................................................................. 26 3.3 CONDUCTED SPURIOUS EMISSIONS FROM THE TRANSMITTER.......................................... 30 3.3.1 Performance Specifications........................................................................................................ 30 3.3.2 Test Procedures........................................................................................................................ 30 3.3.3 Test Configuration ..................................................................................................................... 31 3.3.4 Test Results.............................................................................................................................. 33 3.3.4.1 Channel 8A1.......................................................................................................................................................... 34 3.3.4.2 Channel 14A4 ........................................................................................................................................................ 37 3.4 RADIATED SPURIOUS EMISSIONS FROM THE TRANSMITTER .............................................. 40 3.4.1 Performance Specifications........................................................................................................ 40 3.4.2 Test Procedures........................................................................................................................ 40 3.4.3 Test Configuration ..................................................................................................................... 41 3.4.4 Test Results.............................................................................................................................. 44 3.4.4.1 1-18GHz ............................................................................................................................................................... 45 3.4.4.2 Horizontal Polarization, 18-40GHz ........................................…

Text truncated - open the document above for the full version.

EXHIBIT 7 TEST SETUP PHOTOS Figure 1 Radiated Emission (18-220 GHz) test setup Figure 2: Radiated Emission Test setup (Open Field Site) (30 MHz-18 GHz) Figure 3: Conducted Spurious Emission Test setup