K3Y-38SL-001Point to Multipoint - Subscriber Unit

11717 Exploration Lane, Germantown, MD 20876 Tel: (301) 428–5500 Fax: (301) 428 –1868/2830 1027144– 0001 Draft – Revision D.01 December 17, 1999 Remote Terminal Installation and User Manual 1027144– 0001 Draft – Revision D.01ii For important standards compliance information, see appendix B. Copyright 1999 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trademarks AIReach is a trademark of Hughes Network Systems. Other trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein. 1027144– 0001 Draft – Revision D.01iii RT installation Contents About this manual v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety information vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation summary 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Remote terminal (RT) reference drawing 1–2. . . . . . . . . . . . . . . . . . . . . 1.2 Installation summary and checklist 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Prerequisites 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Review site data and plans 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Plan ahead for building access 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Tools needed for installation 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Prerequisites for commissioning 2–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing indoor RT equipment 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Rack grounding 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Installing IDUs 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Power supplies 3–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Installing the CCM 3–24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 SSIs 3–28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Installing expansion IDUs (EIDUs) 3–34. . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing IFL cables 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Roof and ladder safety 4–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Handling materials 4–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 IFL cable specifications 4–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Overview: IFL plan 4–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Determining the IFL cable route 4–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Penetrating the roof 4–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Installing the penetration sleeve 4–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 Installing the IFL cable inside the building 4–9. . . . . . . . . . . . . . . . . . . . 4.9 Installing the remote lightning arrestor 4–10. . . . . . . . . . . . . . . . . . . . . . . 4.10 Installing the IFL cable on the roof 4–14. . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 Multiple IFL cables 4–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing mast mounts 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Overview 5–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 ODU location 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Roof types 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Mast mount types 5–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Standard nonpenetrating mount 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Using existing structures as ODU mounts 5–11. . . . . . . . . . . . . . . . . . . . 1027144– 0001 Draft – Revision D.01iv RT installation 6 Installing ODUs 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Introduction 6–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Transporting the ODU to the roof 6–4. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 ODU installation and alignment tools 6–5. . . . . . . . . . . . . . . . . . . . . . . . 6.4 Installing the temporary collar 6–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 Installing the antenna mount 6–10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 Attaching the antenna to the mount 6–12. . . . . . . . . . . . . . . . . . . . . . . . . . 6.7 Initial (coarse) antenna azimuth adjustment 6–15. . . . . . . . . . . . . . . . . . . 6.8 Adjusting the antenna elevation 6–17. . . . . . . . . …

Text truncated - open the document above for the full version.

EXHIBIT 3 MANUFACTURING AND PRODUCT INFORMATION

1 Mr. Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 February 28, 2000 RE: CONFIDENTIALITY REQUEST FCC ID K3Y-38SL-001 Applicant: Hughes Network Systems Correspondence Reference Number: 12308 731 Confirmation Number: EA96312 Date of Original E-Mail: 02/23/2000 Dear Mr. Coperich I would like to address two of the questions that have been requested in your correspondence letter No: 12308 dated 02/23/2000. 1. Confidentiality Request The part of the above application has been requested confidentiality. The reason for this is that two exhibits (EXHIBIT 5 & EXHIBIT 8) contain detailed schematics that could lead to technology patent disclosure. The technology is very new and therefore all precautions have to be taken to keep this information confidential from public access. 2. Antenna Gain used in HUB unit The SUB antenna gain is 40.5 dBi. Thank you, for accepting our request. Rega rds John Rymkiewicz Technical Ma nager Hughes Network Systems

1 Frank Coperich Federal Communications Commission Laboratory 7435 Oakland Mills Road, Columbia MD 21046 FCC ID: K3Y38SL-001 Dear Mr. Coperich Please accept the application for the approval of the K3Y38SL-001 Point to Multipoint 38 GHz System to the FCC Part 101 Type Acceptance requirements. The Files have been submitted electronically to the Federal Communications Commission Laboratory Regards John Rymkiewicz

Additional Information Re: FCC ID K3Y38SL-001 Applicant: Hughes Network Systems Correspondence Reference Number: 11408 731 Confirmation Number: EA96312 Date of Original E-Mail: 01/11/2000 Att: Linda Elliott Please correct FCC ID on Form 731 so both Form 731 and FCC ID on the labels will be the same. The FCC ID should be K3Y-38SL-001 The attached label will be placed under connectors. For more details see Figure 1 Front View EXHIBIT 4 External Photos. Thank you Signed by John Rymkiewicz Technical Manager

EXHIBIT 4 EXTERNAL PHOTOS Figure 1 Front View Figure 2 ODU and Antenna - Front View Figure 3 ODU and IDU – Front View

EXHIBIT 1 IDU & ODU LABELS PRODUCT AIReach Broadband IDU 1026356 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment shall be installed in accordance with the HNS installation manual, only in restricted access areas in business and customer premises applications in accordance with articles 110-16, 110-17, and 110-18 of the National Electric Code ANSI/NFPA No. 70. LISTED ITE 4N11 ® C US FCC ID: K3Y-38HL-001 K3Y-38SL-001 K3Y-38HH-001 K3Y-38SH-001 K3Y-24HX-001 K3Y-24SX-001 AIReach Broadband 38GHz Sub Low ODU 1028720-0001 S/N: 1 Rev A FCC ID: K3Y-38SL-001 CAUTION: POWER DOWN ODU BEFORE CONNECTING OR DISCONNECTING IF.

EXHIBIT 2 COMPANY NAME AND MAILING ADDRESS COMPANY NAME AND MAILING ADDRESS: Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 Telephone Number: (301) 428 – 5500 Fax Number:(301) 428 – 2880

EXHIBIT 10 INTERNAL PHOTOS

DateRevRevision RecordApproved PMP 38.6 to 40 GHz Agency Certification Test Report For SUB Low Band Prepared for Hughes Network Systems 11717 Exploration Lane Germantown, MD 20876 JobApprovalsDate Originator:S. AlbannaHughes Network Systems Approved:J. Rymkiewicz Checked:Title: Point to Multipoint (PMP) FCC Part 101 Type Acceptance Test Results Sheet 1 of 57 CAGE No. 52571 No.HNS-18122 Form E75This document created in Microsoft Word Hughes Proprietary II Copyright © 2001 Hughes Network Systems Notice of Proprietary Information This document and its contents are proprietary to Hughes Network Systems and are intended solely for the internal use of Hughes Network Systems. This publication and its contents may not be reproduced or distributed for any other purpose without the written permission of Hughes Network Systems. Hughes Proprietary II No. HNS-18122 Hughes Proprietary II Rev. Sheet 2 of 57 Form E75aHughes Network Systems TABLE OF CONTENTS 1.0 OVERVIEW................................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ........................................................................................................... 6 1.2 CHANALIZATION.......................................................................................................................... 8 1.3 APPLICABLE STANDARDS........................................................................................................ 10 1.4 REFERENCE DOCUMENTS ......................................................................................................11 2.0 SETUP ........................................................................................................................................ 12 2.1 EQUIPMENT LIST ...................................................................................................................... 12 2.2 TEST SETUPS............................................................................................................................ 14 3.0 FCC PART 101 TESTS ............................................................................................................... 16 3.1 THE OUTPUT POWER ............................................................................................................... 16 3.1.1 Performance Specifications ................................................................................................................. 16 3.1.2 Test Procedures ................................................................................................................................... 16 3.1.3 Test Configuration ................................................................................................................................ 17 3.1.4 Test Results ......................................................................................................................................... 17 3.2 OCCUPIED BANDWIDTH ........................................................................................................... 23 3.2.1 Performance Specifications ................................................................................................................. 23 3.2.2 Test Procedures ................................................................................................................................... 23 Table 6 Occupied Bandwidth Test Frequencies .............................................................................................. 23 3.2.3 Test Configuration ................................................................................................................................ 24 3.2.4 Test Results ......................................................................................................................................... 24 3.3 CONDUCTED SPURIOUS EMISSIONS FROM THE TRANSMITTER ........................................ 28 3.3.1 Performance Specifications ................................................................................................................. 28 3.3.2 Test Procedures ................................................................................................................................... 28 3.3.3 Test Configuration ................................................................................................................................ 29 3.3.4 Tests Results........................................................................................................................................ 29 3.3.4.1 High Power (18 dBm) channel 1B1 ..................................................................................................................................... 30 3.3.4.2 High Power (18 dBm) , channel 7B4.................................................................................................................................... 33 3.3.4.3 Low power (-12 dBm) channel 1B1 .................................................................................................................................... 36 3.3.4.4 Low Power (-12 dBm), channel 7B4 .................................................................................................................................... 40 3.4 RADIATED SPURIOUS EMISSIONS FROM THE TRANSMITTER............................................. 43 3.4.1 Performance Specifications ................................................................................................................. 43 3.4.2 Test Procedures ................................................................................................................................... 43 3.4.3 Test Configuration ................................................................................................................................ 44 3.4.4 Test Results .....................................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT 7 TEST SETUP PHOTOS Figure 1 Conducted Spurious Emissions – Test setup Figure 2 Radiated Spurious Emissions – Test setup