K44378702UHF Digital Transceiver

 Thank You We are grateful you have chosen Kenwood for your personal moble applcatons. We beleve ths easy-to-use transcever wll provde dependable communcatons to keep personnel operatng at peak effcency. Kenwood transcevers ncorporate the latest n advanced technology. As a result, we feel strongly that you wll be pleased wth the qualty and features of ths product. nXDn™ NXDN™ s a protocol name for the new dgtal communcaton system usng 4-level FSK technology whch has been co-developed by Kenwood and Icom. MoDels CovereD bY This Manual The models lsted below are covered by ths manual: • NX-700/ NX-700H/ TK-5720: VHF Dgtal Transcever • NX-800/ NX-800H/ TK-5820: UHF Dgtal Transcever noTiCes To The user ◆ Government law prohbts the operaton of unlcensed transmtters wthn the terrtores under government control. ◆ Illegal operaton s punshable by fne and/or mprsonment. ◆ Refer servce to qualfed techncans only. SAFETY: It s mportant that the operator s aware of, and understands, hazards common to the operaton of any transcever. ◆ EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn OFF your transcever whle takng on fuel or whle parked n gasolne servce statons. Do not carry spare fuel contaners n the trunk of your vehcle f your transcever s mounted n the trunk area. ◆ INJURY FROM RADIO FREQUENCY TRANSMISSIONS Do not operate your transcever when somebody s ether standng near to or touchng the antenna, to avod the possblty of rado frequency burns or related physcal njury. ◆ DYNAMITE BLASTING CAPS Operatng the transcever wthn 500 feet (150 m) of dynamte blastng caps may cause them to explode. Turn OFF your transce ver when n an area where blastng s n progress, or where “TURN OFF TWO-WAY RADIO” sgns have been posted. If you are transportng blastng caps n your vehcle, make sure they are carred n a closed metal box wth a padded nteror. Do not transm t whle the caps are beng placed nto or removed from the contaner. The AMBE+2™ voce codng Technology emboded n ths product s protected by ntellectual property rghts ncludng patent rghts, copyrghts and trade secrets of Dgtal Voce Systems, Inc. Ths voce codng Technology s lcensed solely for use wthn ths Communcatons Equpment. The user of ths Technology s explctly prohbted from attemptng to extract, remove, decomp le, reverse engneer, or dsassemble the Object Code, or n any other way convert the Object Code nto a human-readable form. U.S. Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.  One or more of the following statements may be applicable: FCC WARNING Ths equpment generates or uses rado frequency energy. Changes or modfcatons to ths equpment may cause harmful nterference unless the modfcatons are expressly approved n the nstructon manual. The user could lose the authorty to operate ths equpment f an unauthorzed change or modfcaton s made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment generates, uses and can generate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause harmful nterference to rado communcatons. However, there s no guarantee that the nterference wll not occur n a partcular nstallaton. If ths equpment does cause harmful nterference to rado or televson recepton, whch can be determned by turnng the equpment off and on, the user s encouraged to try to correct the nterference by one or more of the followng measures: • Reorent or relocate the recevng antenna. • Increase the separaton between the equpment and recever. • Connect the equpment to an outlet on a crcut dfferent from that to whch the recever s connected. • Consult the dealer for techncal assstance. PreCauTions Observe the followng precautons to prevent fre, personal njury, and transcever damage. • Do not attempt to confgure the transcever whle drvng; t s too dangerous. • Do not dsassemble or modfy the transcever for any reason. • Do not expose the transcever to long perods of drect sunlght, nor place t near heatng applances. • If an abnormal odor or smoke s detected comng from the transcever, swtch the transcever power off mmedately, and contact your Kenwood dealer. • Use of the transcever whle you are drvng may be aganst traffc laws. Please check and observe the vehcle regulatons n your area. • Do not use optons not specfed by Kenwood. ◆ The transcever operates n 12 V negatve ground systems only! Check the battery polarty and voltage of the vehcle before nstallng the transcever. ◆ Use only a Kenwood optonal DC power cable. ◆ Do not cut and/or remove the fuse holder on the DC power cable. For passenger safety, nstall the transcever securely usng an optonal mountng bracket and screw set so the transcever wll not break loose n the event of a collson.  CONTENTS UNPACKING AND CHECKING EQUIPMENT ....................................1 Supplied AcceSSorieS .......................................................................1 PREPARATION ...................................................................................2 ToolS required ................................................................................2 p ower cAble connecTion .................................................................2 inSTAlling The TrAnSceiver ...............................................................3 GETTING ACQUAINTED ..............................................................…

Text truncated - open the document above for the full version.

Jan. 10th, 2008 MET Laboratories 914 West Patapsco Ave. Baltimore MD 21230 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize Intertek Japan K.K. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This agreement expires one year from the current date. Sincerely, Tamaki Shimamura Communications Equipment Division Kenwood Corporation 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Mar. 24th 2008 MET Laboratories 914 West Patapsco Ave. Baltimore MD 21230 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: NX-800H-K,TK-5820-K, FCC ID: 44378702 To whom it may concern: This letter serves as an official request for permanent confidentiality pursuant to 47 CFR Section 0.459 of the Commission Rules. We have requested that the Block Diagram, Schematic Diagrams, Circuit Description, Parts List, Active Devices and Tuning Procedure required to be submitted with this application be withheld from public review. The documents are company proprietary information that could never get into the possession of our competition. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communications Equipment Division Kenwood Corporation 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Feb. 10th, 2008 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer Subject: Justify Extended Frequency Range for MODEL: NX-800H-K, TK-5820-K, FCC ID: K44378702. To Whom It May Concern: This letter serves justification for extended frequencies This device has design capability to operate in the frequency band 450 to 520 MHz and complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transit frequencies using the normally accessible external controls. Please note that Licensed End Users do not have access to any external controls that will allow them to program the equipment. Equipment programming is the responsibility of Kenwood approved Service Agents. The table below has been collated using information from CFR Part 2.106 and lists the Frequency Ranges and Rule Parts, which permit the operation of this equipment inside the United States of America. Table 1 – Frequency Range and Rule Parts - (47 CFR Part 2.106) It is understood that a grant note code may be added to the grant which indicates this required operation. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communications Equipment Division Kenwood Corporation Freq. Range (MHz) Part 90 Part 22 Part 74 Part 95A 450.0000-454.0000 x x 454.0000-455.0000 x 455.0000-456.0000 x 456.0000-460.0000 x x 460.0000-462.5375 x 462.5375-462.7375 x 462.7375-467.5375 x 467.5375-467.7375 x 467.7375-470.0000 x 470.0000-512.0000 x x x 512.0000-520.0000 x 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ! BALTIMORE, MARYLAND 21230-3432 ! PHONE (410) 354-3300 ! FAX (410) 354-3313 June 23, 2008 Federal Communications Commission 445 12 th Street, SW Washington, DC 20554 Attention: Federal Communications Commission Reference: FCC ID: K44378702 To Whom It May Concern: As per 95.631 (a), the grant for Kenwood Corporation, FCC ID: K44378702 has been modified to remove Rule Part 95A from Equipment Specifications that contained an emission designator ending in F1E, F2D, and F7W. If any further information is required, please let me know. If you have any questions regarding this application, please feel free to contact me. Sincerely, Jennifer Warnell TCB Administrator/Documentation MET Laboratories, Inc. Office: 410-949-1877 Fax: 410.354.3313 [email protected]

NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Front View Rear View NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Top View Bottom View (NX-800H-K) NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Bottom View (TK-5820-K) Right View Left View NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Front View (with KRK-10) Rear View (with KRK-10) NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Top View (with KRK-10) NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Rear View (with KRK-10) NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 Right View (with KRK-10) Left View (with KRK-10)

NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 NX-800H-K TK-5820-K NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702

NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 TXRX Component Side View 1/2 TXRX Foil Side View 1/2 NX-800H-K, TK-5820-K FCC ID: K44378702 IC: 282F-378702 TXRX Component Side View 2/2 TXRX Foil Side View 2/2 Display Component Side View Display Foil Side View

Maximum Permissible Exposure (MPE) Evaluation Applicant: Kenwood Corporation Equipmen t: UHF DIGITAL TRANSCEIVER Model No.: NX-800H-K / TK-5820-K FCC ID: K44378702 IC CN and UP N: 282F-378702 MPE Calculations According to the OET Bulletin 65 (Edition 97-01) Where: S=Power density (in appropriate units, e.g. mW/cm 2 ) P=Power input to antenna (in appropriate units, e.g., mW) G=Power gain of the antenna in the direction of interest relative to an isotropic radiator R=Distance to the center of radiation of the antenna (appropriate units, e.g., cm) Tx Frequency=450 to 520 (MHz): FCC 450 to 470 (MHz): IC Maximum peak power =(dBm)(=45W) Antenna gain=(dBi) S=(mW/cm 2 ) P=(mW) (=Maximum peak power x 120% x Dutycycle 50%) G=(numeric) R=(cm) P = Value calculated according to CFR Part 90.205(r) Calculated minimum separation distance from antenna :108.40 (cm) 1.64 108.40 46.53 2.15 0.30 27000.00 S PG R π4 = 2 4R PG S π =

MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antennas. • Antenna Minimum Safe Distance: 120 cm (4 feet), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits. • Antenna Mounting: The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the above indicated minimum safe distance to the antenna, i.e. 120 cm (4 feet) , 50% duty Cycle. • To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe distance shown above, and in accordance with the requirements of the antenna manufacturer or supplier. • Vehicle installation: The antenna can be mounted at the center of a vehicle metal roof or trunk lid, if the minimum safe distance is observed. • Base Station Installation: The antenna should be fixed-mounted on an outdoor permanent structure. RF Exposure compliance must be addressed at the time of installation. Antenna substitution: Do not substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person or persons to excess radio frequency radiation. You may contact your radio dealer or the manufacturer for further instructions. Maintain a separation distance from the antenna to person(s) of at least 120 cm (4 feet), 50% duty Cycle. “This transmitter is authorized to operate with a maximum duty factor of 50%, in typical push-to-talk mode, for satisfying FCC RF exposure compliance requirements.” You, as the qualified end-user of this radio device must control the exposure conditions of bystanders to ensure the minimum separation distance (above) is maintained between the antenna and nearby persons for satisfying RF Exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work-related use, transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna. Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from the antenna/ vehicle. B59-2454-00

Report No : JA08010018 FCC ID :K44378702 IC CN :282F-378702 FALSE TRUE 4 REGULATION :FCC Part 2, 22, 74, 90, 90.210, 95 RSS-119 Issue 9 Kenwood CorporationIntertek Japan K. K. Kashima No.1 Test site 1-16-2, Hakusan, Midori-ku, Yokohama-shiFCC Designation Number : JP0008 Kanagawa, 226-8525 JapanIC File Number : IC-2065A-1 Tel.: +81 45 939 6254 Fax.: +81 45 939 70973-2, Sunayama, Kamisu-shi, Ibaraki-ken 314-0255 Japan Tel.: +81 479 40 1097 Fax.: +81 479 46 1788 URL: www.japan.intertek-etlsemko.com Equipment typeUHF DIGITAL TRANSCEIVER TrademarkKENWOOD Model(s)NX-800H-K / TK-5820-K Serial No. FCC ID K44378702 IC CN and UPN 282F-378702 Measurement MethodANSI/TIA-603-C-2004 / RSS-119 Issue 9(2007), RSS-Gen Issue 2(2007) No deviation Test ResultComplied Report NumberJA08010018 Report issue date Approved byTested by Junichi OkadaKazuo Masuda [Site Manager] This equipment has been shown to be capable of compliance with the applicable standard(s) as indicated in the test report. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Intertek Japan K. K. The results and statements contained in this report pertain only to the equipment evaluated. Applicant TEST REPORT Testing Laboratory Deviation from standard(s) March 31, 2008 None Intertek Japan K.K.Page 1 of 49Version 0.1 Report No : JA08010018 FCC ID :K44378702 IC CN :282F-378702 TABLE OF CONTENTS Page SECTION 1.GENERAL INFORMATION3 SECTION 2.TEST AND MEASUREMENT DATA5 SECTION 3.INFORMATION ABOUT EUT AND SUPPORT EQUIPMENT(S)6 SECTION 4.MEASUREMENT RESULT8 SECTION 5.TEST DATA 5.1Carrier Output Power (Conducted)9 5.2Unwanted Emissions (Transmitter Conducted)11 5.3Field Strength of Spurious Radiation14 5.4Emission Masks (Occupied Bandwidth)18 5.5Transient Frequency Behavior26 5.6Audio Frequency Response / Audio Low Pass Filter (Voice Input)31 5.7Modulation Limiting34 5.8Frequency Stability (Temperature Variation)38 5.9Frequency Stability (Voltage Variation)41 5.10Receiver Spurious Emissions(Radiated)43 5.11Necessary Bandwidth and Emission Bandwidth47 SECTION 6.VALIDITY OF TEST REPORT49 SECTION 7. DESCRIPTION OF TEST SITE49 APPENDIXPHOTOGRAPHS Intertek Japan K.K.Page 2 of 49Version 0.1 Report No : JA08010018 FCC ID :K44378702 IC CN :282F-378702 SECTION 1. GENERAL INFORMATION Description of Test Item Kind of EUT:UHF DIGITAL TRANSCEIVER Condition of EUT:Prototype Type:Mobile type Trademark:KENWOOD Test Performed EUT Received: Test started: Test completed: Temperature:19 to 24 degree C Humidity:31 to 45 % Atmospheric:101.2 to 102.6 kPa Voltage:DC 13.6 V +/- 20 % Current:13.0A Maximum Frequency:None Test Tracability Abbreviations AVG = Average January 29, 2008 January 28, 2008 March 26, 2008 Cal Exp. = Calibration Expire VBW = Video Band Width RBW = Resolution Band Width Tracability to national standards of test result is achieved by means of calibration tractability to national or international standards. EUT = Equipment Under Test D.R.G. Antenna = Double Rigid Guide Antenna Intertek Japan K.K.Page 3 of 49Version 0.1 Report No : JA08010018 FCC ID :K44378702 IC CN :282F-378702 In Accordance with FCC Rules and Regulations, Volume II, Part 2 and 90 Sub-part 2.1033 (c)(1) Applicant and Manufacture Information APPLICANT Company:Kenwood Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan Contact Person:Tamaki Shimamura Manager, Communications Equipment Division MANUFACTURER Company:Kenwood Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan (c)(2) FCC ID FCC ID:K44378702 Model number:NX-800H-K / TK-5820-K Serial number:None (c)(3) Instruction Manual(S) Instruction manual(s):Please refer to attached Exhibits F (c)(4) Type of Emission Emission Designation:16K0F3E(Wide) / 11K0F3E(Narrow) 14K4F1D(Wide) 8K30F1E(Narrow) / 8K30F1D(Narrow) / 8K30F7W(Narrow) 8K10F1E(Narrow) / 8K10F1D(Narrow) 4K00F1E(Very Narrow) / 4K00F1D(Very Narrow) / 4K00F7W(Very Narrow) 4K00F2D(Very Narrow) (c)(5) Frequency range Frequency Range:450 to 520 MHz (CFR) / 450 to 470 MHz (RSS) (c)(6) Power Rating Output Power:10 to 45 W Type:Continuously Variable (c)(7) Maximum Power Rating Output Power:45 W Other Information Number of Channel:250 Maximum Deviation:5 kHz / 2.5 kHz Frequency Stability:1 ppm Antenna Impedance:50 Ω Norminal Note Intertek Japan K.K.Page 4 of 49Version 0.1 Report No : JA08010018 FCC ID :K44378702 IC CN :282F-378702 SECTION 2. TEST AND MEASUREMENT DATA All test and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-part J and Industry Canada as the following individual parts: Test Item Domestic Public Fixed radio Services Non Cellular Public Mobile Services Subpart H - Cellular Radiotelephone Service Alternative technologies and auxiliary service International Fixed Public Radiocommunication service Personal Communications Services Subpart H - Low Power Auxiliary Stations Stations in the Maritime Services Subpart E - general Technical Standards Subpart F - Equipment Authorization for Compulsory Ships Subpart K - Private Coast Stations and Marine Utility Stations Subpart V - Emergency Position Indicating Radiobeacons (EPIRB'S) Subpart W - Global Maritime Distress and Safety System (GMDSS) Subpart X - Voluntary Radio Installations Aviation Services Private Land Mobile radio Services Private Operational - Fixed Microwave Service Subpart A - General Mobile radio Service Subpart C - Radio Control (R/C) radio Service Subpart D - Citizens Band (CB) Radio Service Subpart E -Family radio Service Subpart F -Interactive Video and Data Service (IVDS) Amateur Radio Service Fixed Microwave Se…

Text truncated - open the document above for the full version.

Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 1 of 7 Version 0.1 APPENDIX Setup Photographs Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 2 of 7 Version 0.1 PHOTOGRAPHS OF MEASUREMENT SET-UP 5.1 Carrier Output Power (Conducted) Accordance with TIA-603-C 2.2.1.2 5.2 Unwanted Emission (Conducted Spurious) Accordance with TIA-603-C 2.2.13.2 Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 3 of 7 Version 0.1 5.3 Field Strength of Spurious Radiation : Front view Accordance with TIA-603-C 2.2.12.2 5.3 Field Strength of Spurious Radiation : Rear view Accordance with TIA-603-C 2.2.12.2 Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 4 of 7 Version 0.1 5.4 Emission Masks Accordance with TIA-603-C 2.2.11.2 5.5 Transient Frequency Behavior Accordance with TIA-603-C 2.2.19.3 Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 5 of 7 Version 0.1 5.6 Audio Frequency Response Accordance with TIA-603-C 2.2.6.2.2, 3.2.6.2 5.7 Modulation Limiting Accordance with TIA-603-C 2.2.3.2 Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 6 of 7 Version 0.1 5.8, 5.9 Frequency Stability : Outer view Accordance with TIA-603-C 2.3.2.2 5.8, 5.9 Frequency Stability : Inner view Accordance with TIA-603-C 2.3.2.2 Report No. JA08010018 FCC ID : K44378702 IC : 282F-378702 © Intertek Japan K.K. Page 7 of 7 Version 0.1 5.10 Receiver Spurious Emission (Radiated) : Front view Accordance with ANSI C63.4-2003 / RSS-Gen Section 4.10 5.10 Receiver Spurious Emission (Radiated) : Rear view Accordance with ANSI C63.4-2003 / RSS-Gen Section 4.10