K4439923120UHF P25 Transceiver Model: TK-5810-K2

INSTRUCTION MANUAL MID POWER VHF P25 TRANSCEIVER TK-5710 MID POWER UHF P25 TRANSCEIVER TK-5810 HIGH POWER VHF P25 TRANSCEIVER TK-5710H HIGH POWER UHF P25 TRANSCEIVER TK-5810H © B62-1816-30 (K) 09 08 07 06 05 04 03 02 i THANK YOU We are grateful you have chosen KENWOOD for your personal mobile applications. We believe this easy-to-use transceiver will provide dependable FRPPXQLFDWLRQVWRNHHSSHUVRQQHORSHUDWLQJDWSHDNHIÀFLHQF\ KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS COVERED BY THIS MANUAL The models listed below are covered by this manual: •TK-5710:Mid Power VHF P25 Transceiver •TK-5810:Mid Power UHF P25 Transceiver •TK-5710H:High Power VHF P25 Transceiver •TK-5810H:High Power UHF P25 Transceiver NOTICES TO THEUSER XGovernment law prohibits the operation of unlicensed transmitters within the territories under government control. X ,OOHJDORSHUDWLRQLVSXQLVKDEOHE\ÀQHDQGRULPSULVRQPHQW X 5HIHUVHUYLFHWRTXDOLÀHGWHFKQLFLDQVRQO\ SAFETY: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. XEXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area. XINJURY FROM RADIO FREQUENCY TRANSMISSIONS Do not operate your transceiver when somebody is either standing near to or touching the antenna, to avoid the possibility of radio frequency burns or related physical injury. XDYNAMITE BLASTING CAPS Operating the transceiver within 500 feet (150 m) of dynamite blasting caps may cause them to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where “TURN OFF TWO-WAY RADIO” signs have been posted. If you are transporting blasting caps in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or removed from the container. This device made under license under one or more of the following US Patents: 4,590,473; 4,636,791; 4,716,407; 4,972,460; 5,148,482; 5,185,796; 5,271,017; 5,377,229; 5,502,767. The IMBE™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. ii One or more of the following statements may be applicable: FCC WARNING 7KLVHTXLSPHQWJHQHUDWHVRUXVHVUDGLRIUHTXHQF\HQHUJ\&KDQJHVRUPRGLÀFDWLRQVWRWKLV HTXLSPHQWPD\FDXVHKDUPIXOLQWHUIHUHQFHXQOHVVWKHPRGLÀFDWLRQVDUHH[SUHVVO\DSSURYHGLQWKH instruction manual. The user could lose the authority to operate this equipment if an unauthorized FKDQJHRUPRGLÀFDWLRQLVPDGH INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer for technical assistance. PRECAUTIONS 2EVHUYHWKHIROORZLQJSUHFDXWLRQVWRSUHYHQWÀUHSHUVRQDOLQMXU\DQGWUDQVFHLYHU damage. ‡ 'RQRWDWWHPSWWRFRQÀJXUHWKHWUDQVFHLYHUZKLOHGULYLQJLWLVWRRGDQJHURXV • Do not disassemble or modify the transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances. • If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, and contact your KENWOOD dealer. ‡ 8VHRIWKHWUDQVFHLYHUZKLOH\RXDUHGULYLQJPD\EHDJDLQVWWUDIÀFODZV3OHDVHFKHFN and observe the vehicle regulations in your area. ‡ 'RQRWXVHRSWLRQVQRWVSHFLÀHGE\KENWOOD. XThe transceiver operates in12 V negative ground systems only! Check the battery polarity and voltage of the vehicle before installing the transceiver. XUse only a KENWOODoptional DC power cable. X 'RQRWFXWDQGRUUHPRYHWKHIXVHKROGHURQWKH'&SRZHUFDEOH For passenger safety, install the transceiver securely using an optional mounting bracket and screw set so the transceiver will not break loose in the event of a collision. iii CONTENTS UNPACKING AND CHECKING EQUIPMENT ....................................1 S UPPLIEDACCESSORIES.......................................................................1 PREPARATION ...................................................................................2 T OOLS REQUIRED................................................................................2 P OWER CABLE CONNECTION.................................................................2 I NSTALLING THETRANSCEIVER.........................................................…

Text truncated - open the document above for the full version.

DOC-FCC009 4/14/2005 Page 1 of 2 FEDERAL COMMUNICATIONS COMMISSION - FCC FORM 731 APPLICATION FOR EQUIPMENT AUTHORIZATION Approved by OMB 3060 - 0934 Expires 10/12/2006 Item 1. Applicant's complete, legal business name: Kenwood Corporation Item 2. Applicant's mailing address Line 1: 1-16-2, Hakusan City: Midori-ku State: Yokohama Country (if foreign address): Japan Zip/Postal Code: 226-8525 Item 3. FCC ID: K4439923120 Grantee code: K44 Equipment Product Code (14 characters maximum): 39923120 Item 4. Person at the applicant's address to receive grant or for contact: First Name: Tamaki Last Name: Shimamura Line 1: 1-16-2, Hakusan Midori-ku City: Yokohama State: Kanagawa Country (if foreign address): Japan Zip/Postal Code: 226-8525 Telephone: + 81 045 939 6254 Fax No: +81 045 939 7093 E-mail: [email protected] Item 5. Instead of Applicant, the original Grant is authorized to be mailed to: N/A Item 6. Technical Contact: First Name: Naoki Last Name: Ikeda Line 1: 3-2 Sunayama City: Kamisu State: Ibaraki Country (if foreign address): Japan Zip/Postal Code: 314-0255 Telephone: + 81 0479 40 1097 Fax No: +81 0479 46 1788 E-mail: [email protected] Item 7. Non-Technical Contact: First Name: Naoki Last Name: Ikeda Line 1: 3-2 Sunayama City: Kamisu State: Ibaraki Country (if foreign address): Japan Zip/Postal Code: 314-0255 Telephone: + 81 0479 40 1097 Fax No: +81 0479 46 1788 E-mail: [email protected] E-mail: Item 8. * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules? If "Yes" see instructions. (please mark as appropriate) Τ Yes Ο No Item 9. Does the applicant request that the Commission defer grant of this application pursuant 47 CFR § 0.457(d)(1)(ii)? (See instructions) If so, specify date when grant may be issued (MM/DD/YYYY format): N/A Item 10. * Equipment Class: * Description of Product as it is Marketed: UHF P25 TRANSCEIVER Model :TK-5810-K2 (NOTE: This text will appear below the equipment class on the grant) DOC-FCC009 4/14/2005 Page 2 of 2 Item 11. * Application is for: (please mark as appropriate) Τ Original Equipment (See instructions) Ο Change in identification of presently authorized equipment: Original FCC ID: Grant Date (MM/DD/YYYY format): Ο Class II permissive change or modification of presently authorized equipment (See instructions) Item 12. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? If either of the above questions is answered "Yes" complete section 12(c). Ο Yes Τ No Ο Yes Τ No (c) The related application: Ο has been granted under the FCC ID listed to the right Ο is in the process of being filed under the FCC ID listed to the right Ο is pending with the FCC under the FCC ID listed to the right FCC ID N/A Item 13. Name of test firm and contact person on file with the FCC, if different from applicant or contact person: Firm Name: MET Laboratories Address: 914 West Patapsco Avenue City: Baltimore State & Zip: MD 21230 Last Name: Confroy First Name: Marie Telephone: 410-354-3300 Ext: 412 Fax No.: 410-354-3313 E-mail: [email protected] Item 14. Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization. N/A Read each certification carefully before answering and signing this application Equipment Specifications: Rule Part Frequency Range (MHz) Power (W) Frequency Tolerance and Units Emission Designator Note Codes 22, 74, 90, 90.210 400- 470MHz 45W (Power output continuously variable to 5W) +/- 2.0ppm 16K0F3E, 11K0F3E 20K0F7D, 11K2F7D 14K4F1D, 7K20F1D 8K10F1E, 8K10F1D WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTITUTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503). Item 15. *SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION: The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? Τ Yes Ο No Item 16. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. IN accepting a Grant of Equipment Authorization issued by the FCC as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC …

Text truncated - open the document above for the full version.

Sep. 25th, 2006 MET Laboratories 914 West Patapsco Ave. Baltimore MD 21230 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize ETL SEMKO JAPAN K.K. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This agreement expires one year from the current date. Sincerely, Tamaki Shimamura Communication Equipment Division Kenwood Corporation 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Sep. 25th, 2006 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: TK-5810-K2, FCC ID: K4439923120 To Whom It May Concern: This letter serves as an official request for permanent confidentiality pursuant to 47 CFR Section 0.459 of the Commission Rules. We have requested that the Block Diagram, Schematic Diagrams, Circuit Description, Parts List, Active Devices and Tuning Procedure required to be submitted with this application be withheld from public review. The documents are company proprietary information that could never get into the possession of our competition. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communication Equipment Division Kenwood Corporation 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Front View (with KCH-14) Rear View (with KCH-14) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Top View (with KCH-14) Bottom View (with KCH-14) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Right View (with KCH-14) Left View (with KCH-14) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Front View (with KCH-15) Rear View (with KCH-15) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Top View (with KCH-15) Bottom View (with KCH-15) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Right View (with KCH-15) Left View (with KCH-15) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Front View (with KCH-14 and KRK-5) Rear View (with KCH-14 and KRK-5) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Top View (with KCH-14 and KRK-5) Bottom View (with KCH-14 and KRK-5) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Right View (with KCH-14 and KRK-5) Left View (with KCH-14 and KRK-5) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Front View (with KCH-15 and KRK-5) Rear View (with KCH-15 and KRK-5) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Top View (with KCH-15 and KRK-5) Bottom View (with KCH-15 and KRK-5) TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Right View (with KCH-15 and KRK-5) Left View (with KCH-15 and KRK-5)

TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120

TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Final Unit Component Side View Final Unit Foil Side View TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 Control Unit Component Side View Control Unit Foil Side View TK-5810-K2 FCC ID: K4439923120 IC ID: 282F-39923120 TXRX Unit Component Side View TXRX Unit Foil Side View

Maximum Permissible Exposure (MPE) Evaluation Applicant:Kenwood Corporation Equipmen t:UHF P25 TRANSCEIVER Model No.:TK-5810-K2 FCCID:K4439923120 IC:282F-39923120 MPE Calculations According to the OET Bulletin 65 (Edition 97-01) Where: S=Power density (in appropriate units, e.g. mW/cm 2 ) P=Power input to antenna (in appropriate units, e.g., mW) G=Power gain of the antenna in the direction of interest relative to an isotropic radiator R=Distance to the center of radiation of the antenna (appropriate units, e.g., cm) Tx Frequency=400 to 470 (MHz) Maximum peak power =(dBm)(=45W) Antenna gain=(dBi) S=(mW/cm 2 ) P=(mW) (=Maximum peak power x 120% x Dutycycle 50%) G=(numeric) R=(cm) P = Value calculated according to CFR Part 90.205(r) Calculated minimum separation distance from antenna :114.97 (cm) 1.64 114.97 46.53 2.15 0.27 27000.00 S PG R π4 = 2 4R PG S π =

MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antenna. • Antenna Minimum Safe Distance: 120 cm (4 feet), 50% duty Cycle. • Antenna Gain: 0dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits. • Antenna Mounting: The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the above indicated minimum safe distance to the antenna, i.e. 120 cm (4 feet) , 50% duty Cycle. • To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe distance shown above, and in accordance with the requirements of the antenna manufacturer or supplier. • Vehicle installation: The antenna can be mounted at the center of a vehicle metal roof or trunk lid, if the minimum safe distance is observed. • Base Station Installation: The antenna should be fixed-mounted on an outdoor permanent structure. RF Exposure compliance must be addressed at the time of installation. Antenna substitution: Do not substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person or persons to excess radio frequency radiation. You may contact your radio dealer or the manufacturer for further instructions. Maintain a separation distance from the antenna to person(s) of at least 120 cm (4 feet) , 50% duty Cycle. “This transmitter is authorized to operate with a maximum duty factor of 50%, in typical push-to-talk mode, for satisfying FCC RF exposure compliance requirements.” You, as the qualified end-user of this radio device must control the exposure conditions of bystanders to ensure the minimum separation distance (above) is maintained between the antenna and nearby persons for satisfying RF Exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work-related use, transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna. Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from the antenna/vehicle

Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 FALSE TRUE 4 Regulation : FCC Part 2, 22, 74, 90, 90.210 RSS-119 Issue 8(2006) Kenwood CorporationETL SEMKO Japan K. K. Kashima No.1 Test site 1-16-2, Hakusan, Midori-ku, Yokohama-shiFCC Registration Number : 934283 Kanagawa, 226-8525 JapanIC File Number : IC-2065-1 Tel.: +81 45 939 6254 Fax.: +81 45 939 70933-2, Sunayama, Kamisu-shi, Ibaraki-ken 314-0255 Japan Tel.: +81 479 40 1097 Fax.: +81 479 46 1788 URL: www.japan.intertek-etlsemko.com Equipment typeUHF P25 TRANSCEIVER TrademarkKENWOOD Model(s)TK-5810-K2 Serial No.None FCC ID K4439923120 IC CN and UPN 282F-39923120 Measurement MethodANSI/TIA-603-C-2004 / RSS-119 Issue 8(2006), RSS-Gen Issue 1(2005) No deviation Test ResultComplied Report NumberESJ-106126 Report issue date Approved byTested by Kazuo GokitaNaoki Ikeda [Assistant Manager] This equipment has been shown to be capable of compliance with the applicable standard(s) as indicated in the test report. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of ETL SEMKO Japan K. K. The results and statements contained in this report pertain only to the equipment evaluated. Applicant CERTIFICATE OF COMPLIANCE Testing Laboratory Deviation from standard(s) October 04, 2006 ETL SEMKO Japan K.K.Page 1 of 46Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 TABLE OF CONTENTS Page SECTION 1.GENERAL INFORMATION3 SECTION 2.TEST AND MEASUREMENT DATA5 SECTION 3.MEASUREMENT RESULT6 SECTION 4.TEST DATA 4.1Carrier Output Power (Conducted)7 4.2Unwanted Emissions (Transmitter Conducted)9 4.3Field Strength of Spurious Radiation12 4.4Emission Masks (Occupied Bandwidth)16 4.5Transient Frequency Behavior24 4.6Audio Frequency Response / Audio Low Pass Filter (Voice Input)28 4.7Modulation Limiting31 4.8Frequency Stability (Temperature Variation)35 4.9Frequency Stability (Voltage Variation)38 4.10Receiver Spurious Emissions(Radiated)40 4.11Necessary Bandwidth and Emission Bandwidth44 SECTION 5.VALIDITY OF TEST REPORT46 SECTION 6. DESCRIPTION OF TEST SITE46 APPENDIXPHOTOGRAPHS ETL SEMKO Japan K.K.Page 2 of 46Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 SECTION 1. GENERAL INFORMATION DESCRIPTION OF TEST ITEM Kind of EUT:UHF P25 TRANSCEIVER Condition of EUT:Prototype Type:Mobile Trademark:KENWOOD TEST PERFORMED EUT Received: Test started: Test completed: Temperature:21 to 25 degree C Humidity:46 to 70 % Atmospheric:100.5 to 102.5 kPa Voltage:DC 13.6 V +/- 15% Current:14A Maximum Frequency:None TEST TRACABILITY ABBREVIATIONS September 26, 2006 Cal Exp. = Calibration Expire Tracability to national standards of test result is achieved by means of calibration tractability to national or international standards. EUT = Equipment Under Test D.R.G. Antenna = Double Rigid Guide Antenna September 11, 2006 September 11, 2006 ETL SEMKO Japan K.K.Page 3 of 46Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 In Accordance with FCC Rules and Regulations, Volume II, Part 2 and 90 Sub-part 2.1033 (c)(1) APPLICANT AND MANUFACTURER INFORMATION APPLICANT Company:Kenwood Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi Kanagawa, 226-8525 Japan Contact Person:Tamaki Shimamura Manager, Communications Equipment Division MANUFACTURER Company:Kenwood Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan (c)(2) FCC ID FCC ID:K4439923120 Model number:TK-5810-K2 Serial number:None (c)(3) INTRUCTION MANUAL(S) Instruction manual(s):Please refer to attached Exhibits F (c)(4) TYPE OF EMISSION Emission Designation:16K0F3E(Wide) / 11K0F3E(Narrow) 20K0F7D(Wide) / 11K2F7D(Narrow) 14K4F1D(Wide) / 7K20F1D(Narrow) 8K10F1E(Narrow) / 8K10F1D(Narrow) (c)(5) FREQUENCY RANGE Frequency Range:400 to 470 MHz (c)(6) POWER RATING Output Power:5 to 45W Type:Variable (c)(7) MAXIMUM POWER RATING Output Power:45 W OTHER INFORMATION Number of Channel:512 Channel Spacing:25 kHz / 12.5 kHz Antenna Impedance:50 Ω Norminal Note ETL SEMKO Japan K.K.Page 4 of 46Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 SECTION 2. TEST AND MEASUREMENT DATA All test and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-part J and Industry Canada as the following individual parts: Domestic Public Fixed radio Services Non Cellular Public Mobile Services Subpart H - Cellular Radiotelephone Service Alternative technologies and auxiliary service International Fixed Public Radiocommunication service Personal Communications Services Subpart H - Low Power Auxiliary Stations Stations in the Maritime Services Subpart E - general Technical Standards Subpart F - Equipment Authorization for Compulsory Ships Subpart K - Private Coast Stations and Marine Utility Stations Subpart V - Emergency Position Indicating Radiobeacons (EPIRB'S) Subpart W - Global Maritime Distress and Safety System (GMDSS) Subpart X - Voluntary Radio Installations Aviation Services Private Land Mobile radio Services Private Operational - Fixed Microwave Service Subpart A - General Mobile radio Service Subpart C - Radio Control (R/C) radio Service Subpart D - Citizens Band (CB) Radio Service Subpart E -Family radio Service Subpart F -Interactive Video and Data Service (IVDS) Amateur Radio Service Fixed Microwave Service RSS-Gen General Requirements and Information for the Certification of Radiocommunication Equipment YES FCC RULETEST ITEM Part 80 Part 80 Part 21 Part 22 Part 22 Part 22 Part 22 Part 80 Part 80 Part 23 Part 24 Part 74 Part 80 IC RULETEST ITEMTested RSS-119 Land Mobile and…

Text truncated - open the document above for the full version.

Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 APPENDIX ETL SEMKO Japan K.K.Page 1 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 PHOTOGRAPHS OF MEASUREMENT SET-UP 4.1 Carrier Output Power (Conducted) Accordance with TIA-603-C 2.2.1.2 4.2 Unwanted Emission (Conducted Spurious) Accordance with TIA-603-C 2.2.13.2 ETL SEMKO Japan K.K.Page 2 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 4.3 Field Stren gth of Spurious Radiation : Front view Accordance with TIA-603-C 2.2.12.2 4.3 Field Stren gth of Spurious Radiation : Rear view ETL SEMKO Japan K.K.Page 3 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 4.4 Emission Mask Accordance with TIA-603-C 2.2.11.2 4.5 Transient Fre quency Behavior Accordance with TIA-603-C 2.2.19.3 ETL SEMKO Japan K.K.Page 4 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 4.6 Audio Fre quency Response Accordance with TIA-603-C 2.2.6.2.2, 3.2.6.2 4.7 Modulation Limitin g Accordance with TIA-603-C 2.2.3.2 ETL SEMKO Japan K.K.Page 5 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 4.8 , 4.9 Frequency Stability : Outer view Accordance with TIA-603-C 2.3.2.2 4.8 , 4.9 Frequency Stability : Inner view ETL SEMKO Japan K.K.Page 6 of 7Version 0.0 Report No : ESJ-106126 FCC ID : K4439923120 IC : 282F-39923120 4.10 Receiver S purious Emission (Radiated) : Front view Accordance with ANSI C63.4-2003 / RSS-Gen Section 4.8 4.10 Receiver S purious Emission (Radiated) : Rear view ETL SEMKO Japan K.K.Page 7 of 7Version 0.0