K44409301900 MHz Digital Transceiver

NX-900/ NX-901 © B62-2384-00 (K) 09 08 07 06 05 04 03 02 01 00 800MHz DIGITAL TRANSCEIVER 900MHz DIGITAL TRANSCEIVER INSTRUCTION MANUAL ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE 800MHz ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE 900MHz MODE D’EMPLOI TRANSCEPTOR DIGITAL 800MHz TRANSCEPTOR DIGITAL 900MHz MANUAL DE INSTRUCCIONES 800MHz DIGITAL TRANSCEIVER 900MHz DIGITAL TRANSCEIVER NX-900/NX-901 INSTRUCTION MANUAL ENGLISH i THANK YOU We are grateful you have chosen KENWOOD for your personal mobile applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed transmitters within the territories under government control. ◆ Illegal operation is punishable by fine and/or imprisonment. ◆ Refer service to qualified technicians only. SAFETY: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. ◆ EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area. ◆ INJURY FROM RADIO FREQUENCY TRANSMISSIONS Do not operate your transceiver when somebody is either standing near to or touching the antenna, to avoid the possibility of radio frequency burns or related physical injury. ◆ DYNAMITE BLASTING CAPS Operating the transceiver within 500 feet (150 m) of dynamite blasting caps may cause them to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where “TURN OFF TWO-WAY RADIO” signs have been posted. If you are transporting blasting caps in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or removed from the container. ii One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. PRECAUTIONS Observe the following precautions to prevent fire, personal injury, and transceiver damage. • Do not attempt to configure the transceiver while driving; it is too dangerous. • Do not disassemble or modify the transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances. • If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, and contact your KENWOOD dealer. • Use of the transceiver while you are driving may be against traffic laws. Please check and observe the vehicle regulations in your area. • Do not use options not specified by KENWOOD. ◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and voltage of the vehicle before installing the transceiver. ◆ Use only a KENWOOD optional DC power cable. ◆ Do not cut and/or remove the fuse holder on the DC power cable. For passenger safety, install the transceiver securely using an optional mounting bracket and screw set so the transceiver will not break loose in the event of a collision. iii CONTENTS UNPACKING AND CHECKING EQUIPMENT ....................................1 SUPPLIED ACCESSORIES .......................................................................1 PREPARATION ...................................................................................2 T OOLS REQUIRED ................................................................................2 POWER CABLE CONNECTION .................................................................2 I NSTALLING THE TRANSCEIVER ...............................................................3 GETTING ACQUAINTED .....................................................................4 F RONT PANEL .....................................................................................4 DISPLAY .............................................................................................5 REAR PANEL ......................................................................................6 PROGRAMMABLE FUNCTIONS ........................................................7 BASIC OPERATIONS ..........................................................................9 S WITCHING POWER ON/OFF ...............................................................9 ADJUSTING THE VOLUME ...............................…

Text truncated - open the document above for the full version.

MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antennas. • Antenna Minimum Safe Distance: 60 cm (2 feet), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits. • Antenna Mounting: The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the above indicated minimum safe distance to the antenna, i.e. 60 cm (2 feet) , 50% duty Cycle. • To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe distance shown above, and in accordance with the requirements of the antenna manufacturer or supplier. • Vehicle installation: The antenna can be mounted at the center of a vehicle metal roof or trunk lid, if the minimum safe distance is observed. • Base Station In stallation: Th e an tenna sh ould be f ixed-mounted on an ou tdoor pe rmanent st ructure. RF Ex posure co mpliance mu st be ad dressed at th e ti me of in stallation. Antenna substitution: Do not substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person or persons to excess radio frequency radiation. You may contact your radio dealer or the manufacturer for further instructions. Maintain a separation distance from the antenna to person(s) of at least 60 cm (2 feet), 50% duty Cycle. “This transmitter is authorized to operate with a maximum duty factor of 50%, in typical push-to-talk mode, for satisfying FCC RF exposure compliance requirements.” You, as th e qu alified en d-user of th is ra dio de vice mu st co ntrol th e ex posure co nditions of by standers to en sure th e mi nimum se paration di stance (a bove) is ma intained be tween th e an tenna an d ne arby pe rsons fo r sa tisfying RF Ex posure co mpliance. Th e op eration of th is tr ansmitter mu st sa tisfy th e re quirements of Oc cupational/Controlled Ex posure En vironment, fo r wo rk-related us e, tr ansmit on ly wh en pe rson(s) ar e at le ast th e mi nimum di stance fr om th e pr operly in stalled, ex ternally mo unted an tenna. Tr ansmit on ly wh en pe ople ou tside th e vehicle are at least the recommended minimum lateral distance away from the antenna/vehicle. B59-xxxx-00

Oct. 3rd, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize Intertek Japan K.K. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This agreement expires one year from the current date. Sincerely, Tamaki Shimamura Communications Equipment Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Oct. 14th 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: NX-901-K, FCC ID: K44409301. To whom it may concern: This letter serves as an official request for permanent confidentiality pursuant to 47 CFR Section 0.459 of the Commission Rules. We have requested that the Block Diagram, Schematic Diagrams, Circuit Description, Parts List, Active Devices and Tuning Procedure required to be submitted with this application be withheld from public review. The documents are company proprietary information that could never get into the possession of our competition. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communications Equipment Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

NX-901-K FCC ID: K44409301 IC: 282F-409301 Front View Rear View NX-901-K FCC ID: K44409301 IC: 282F-409301 Top View NX-901-K FCC ID: K44409301 IC: 282F-409301 Bottom View NX-901-K FCC ID: K44409301 IC: 282F-409301 Right View Left View NX-901-K FCC ID: K44409301 IC: 282F-409301 Front View (with KRK-10) Rear View (with KRK-10) NX-901-K FCC ID: K44409301 IC: 282F-409301 Top View (with KRK-10) NX-901-K FCC ID: K44409301 IC: 282F-409301 Rear View (with KRK-10) NX-901-K FCC ID: K44409301 IC: 282F-409301 Right View (with KRK-10) Left View (with KRK-10)

NX-901-K FCC ID: K44409301 IC: 282F-409301

NX-901-K FCC ID: K44409301 IC: 282F-409301 NX-901-K FCC ID: K44409301 IC: 282F-409301 NX-901-K FCC ID: K44409301 IC: 282F-409301 NX-901-K FCC ID: K44409301 IC: 282F-409301 NX-901-K FCC ID: K44409301 IC: 282F-409301 NX-901-K FCC ID: K44409301 IC: 282F-409301

Maximum Permissible Exposure (MPE) Evaluation Applicant: JVC KENWOOD Corporation Equipmen t: 900MHz DIGITAL TRANSCEIVER Model No.: NX-901-K FCC ID: K44409301 IC CN and UP N: 282F-409301 MPE Calculations According to the OET Bulletin 65 (Edition 97-01) Where: S=Power density (in appropriate units, e.g. mW/cm 2 ) P=Power input to antenna (in appropriate units, e.g., mW) G=Power gain of the antenna in the direction of interest relative to an isotropic radiator R=Distance to the center of radiation of the antenna (appropriate units, e.g., cm) Tx Frequency= 896 to 901 (MHz): FCC/IC 935 to 940 (MHz): FCC/IC Maximum peak power =(dBm)(=15W) Antenna gain=(dBi) S=(mW/cm 2 ) P=(mW) (=Maximum peak power x 120% x Dutycycle 50%) G=(numeric) R=(cm) P = Value calculated according to CFR Part 90.205(s) Calculated minimum separation distance from antenna :44.35 (cm) 1.64 44.35 41.76 2.15 0.60 9000.00 S PG R 4  2 4R PG S  

Maximum Permissible Exposure (MPE) Evaluation Applicant: JVC KENWOOD Corporation Equipmen t: 900MHz DIGITAL TRANSCEIVER Model No.: NX-901-K FCC ID: K44409301 IC CN and UP N: 282F-409301 MPE Calculations According to the OET Bulletin 65 (Edition 97-01) Where: S=Power density (in appropriate units, e.g. mW/cm 2 ) P=Power input to antenna (in appropriate units, e.g., mW) G=Power gain of the antenna in the direction of interest relative to an isotropic radiator R=Distance to the center of radiation of the antenna (appropriate units, e.g., cm) Tx Frequency= 901 to 902 (MHz): FCC/IC 940 to 941 (MHz): FCC/IC Maximum peak power =(dBm)(=7W) Antenna gain=(dBi) S=(mW/cm 2 ) P=(mW) (=Maximum peak power x 120% x Dutycycle 50%) G=(numeric) R=(cm) P = Value calculated according to CFR Part 90.205(s) Calculated minimum separation distance from antenna :30.21 (cm) 1.64 30.21 38.45 2.15 0.60 4200.00 S PG R 4  2 4R PG S  

Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 TRUE FALSE 3 REGULATION :FCC Part 2, 90, 24D RSS-119 Issue 11, RSS-134 Issue1 JVC KENWOOD CorporationIntertek Japan K. K. Kashima Laboratory 1-16-2, Hakusan, Midori-ku, Yokohama-shi3-2, Sunayama, Kamisu-shi, Ibaraki-ken Kanagawa314-0255 Japan 226-8525 JapanTel.: +81 479 40 1097 Tel.: +81 45 939 6254 Intertek Japan K. K. Tochigi Laboratory 870 Nakaawano, Kanuma-shi, Tochigi-ken 322-0306 Japan Tel.: +81 289 86 7121 Equipment type900MHz DIGTAL TRANSCEIVER TrademarkKENWOOD Model(s)NX-901-K Serial No. FCC ID K44409301 IC CN and UPN 282F-409301 Test ResultComplied Report NumberJT11090001 Report issue date Approved byTested by Kazuo GokitaAtsuyuki Morishima [Manager] This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been Applicant TEST REPORT Testing Laboratory November 02, 2011 None Intertek Japan K.K.Page 1 of 77 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 In Accordance with FCC Rules and Regulations, Volume II, Part 2 and 90 Sub-part 2.1033 (c)(1) Applicant and Manufacture Information APPLICANT Company:JVC KENWOOD Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi 226-8525 Japan Contact Person:Tamaki Shimamura Manager, Communications Equipment Division MANUFACTURER Company:JVC KENWOOD Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi 226-8525 Japan (c)(2) FCC ID FCC ID:K44409301 Model number:NX-901-K Serial number:None (c)(3) Instruction Manual(S) Instruction manual(s) :Please refer to attached Exhibits F (c)(4) Type of Emission Emission Designation :11K0F3E(Narrow) 8K30F1E(Narrow) / 8K30F1D(Narrow) / 8K30F7W(Narrow) 4K00F1E(Very Narrow) / 4K00F1D(Very Narrow) / 4K00F7W(Very Narrow) 4K00F2D(Very Narrow) (c)(5) Frequency range Frequency Range:896 to 901 MHz(Part90, RSS-119) and 901 to 902 MHz(Part24, RSS-134) 935 to 940 MHz(Part90, RSS-119) and 940 to 941 MHz(Part24, RSS-134) (c)(6) Power Rating Output Power:5 to 15 W (896-901, 935-940MHz) 5 to 7 W (901-902, 940-941MHz) Type:Continuously Variable (c)(7) Maximum Power Rating Output Power:15 W (896-901, 935-940MHz) 7 W (901-902, 940-941MHz) Collector Current, A:9.0 amps (Maximum) Collector Voltage, Vdc :13.6 vdc Supply Voltage, Vdc:13.6 vdc Other Information Number of Channel:Zone 128 max. Channel 512 max. Maximum Deviation:2.5kHz Frequency Stability:1.0 ppm Antenna Impedance:50 Ω Norminal Note including final transistor or solid-state device (c)(8): Voltages & currents in all elements in final RF stage, Intertek Japan K.K.Page 2 of 77 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 TABLE OF CONTENTS Page SECTION 1. GENERAL INFORMATION4 SECTION 2. SUMMARY OF TEST RESULT5 SECTION 3. TEST AND MEASUREMENT DATA6 SECTION 4. INFORMATION ABOUT EUT AND SUPPORT EQUIPMENT(S)7 SECTION 5. SUPPORT EQUIPMENT8 SECTION 6. USED CABLE(S)9 SECTION 7. TEST CONFIGURATION10 SECTION 8. OPERATING CONDITION11 SECTION 9. MEASUREMENT UNCERTAINTY12 SECTION 10. TEST DATA 10.1Carrier Output Power (Conducted)13 10.2Unwanted Emissions (Transmitter Conducted)15 10.3Field Strength of Spurious Radiation19 10.4Emission Masks (Occupied Bandwidth)29 10.5Transient Frequency Behavior47 10.6Audio Frequency Response / Audio Low Pass Filter (Voice Input)57 10.7Modulation Limiting60 10.8Frequency Stability (Temperature Variation)64 10.9Frequency Stability (Voltage Variation)70 10.10Receiver Spurious Emissions(Radiated)72 10.11Necessary Bandwidth and Emission Bandwidth77 APPENDIXPHOTOGRAPHS Intertek Japan K.K.Page 3 of 77 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 SECTION 1. GENERAL INFORMATION TEST PERFORMED LocationKashima No.1 Test Site, Tochigi No.2 Test Site EUT Received Date of Testto Standard AppliedFCC Part 2, 90, 24D RSS-119 Issue 11, RSS-134 Issue1 Measurement Method Deviation from Standard(s)Not applicable QUALIFICATIONS OF TESTING LABORATORY(Kashima Lab.) ACCREDITATIONSCOPELAB. CODERemarks NVLAPEMC Testing100290-0USA VLACEMC TestingVLAC-008-1JAPAN BSMIEMC TestingSL2-IN-E-6008TAIWAN FILING VCCIEMC TestingJAPAN FCCEMC TestingDesignation Number:JP0008 ICEMC TestingIC-2042K-1, IC-2042K-3CANADA CB-SchemeEMC TestingTL222IECEE SAUDI ARABIAEMC TestingN/A QUALIFICATIONS OF TESTING LABORATORY(Tochigi Lab.) ACCREDITATIONSCOPELAB. CODERemarks VLACEMC TestingVLAC-008-5JAPAN BSMIEMC TestingSL2-IN-E-6017, SL2-A-E-6017TAIWAN FILING VCCIEMC TestingJAPAN FCCEMC TestingDesignation Number:JP0011USA ICEMC TestingIC-2042P-1, IC-2042P-2CANADA SAUDI ARABIAEMC TestingN/A ABBREVIATIONS EUTDoC AMNISN LISNQ-P AMPAVG ATTPK ANTCal BBAN/A DIPLCD AEAssociated Equipment4LEVEL FSK 4LEVEL Frequency Shift Key GMSKCW ID FMC4FM PTTPush to TalkAFC ANSI/TIA-603-D-2010 / FCC Part90, Part24D RSS-119 Issue 11(2011), RSS-134 Issue 1(2000), RSS-Gen Issue 3(2010) R-272, C-276, C-277, T-1720, T-1721 R-576, C-590, T-1722, G-121 R-788, C-278, C-279, T-1716, T-1717, G-119 Average Peak R-257, C-260, C-284, T-1736, T-1737, G-124 Calibration Not applicable or Not available Amplifier Attenuator Antenna Broadband Antenna Line Impedance Stabilization Network Equipment Un…

Text truncated - open the document above for the full version.

Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 APPENDIX Intertek Japan K.K.Page 1 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 PHOTOGRAPHS OF MEASUREMENT SET-UP 10.1 Carrier Output Power (Conducted) <FM Modulation Case> <CW ID Modulation Case> Intertek Japan K.K.Page 2 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.2 Unwanted Emission (Conducted Spurious) Intertek Japan K.K.Page 3 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.3 Field Stren gth of Spurious Radiation : Front view 10.3 Field Stren gth of Spurious Radiation : Rear view Intertek Japan K.K.Page 4 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.4 Emission Masks <CW ID Modulation Case> <FM Modulation Case> Intertek Japan K.K.Page 5 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.5 Transient Frequenc y Behavior 10.6 Audio Frequency Response Intertek Japan K.K.Page 6 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.7 Modulation Limitin g Intertek Japan K.K.Page 7 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.8, 10.9 Frequenc y Stability : Outer view 10.8, 10.9 Frequenc y Stability : Inner view Intertek Japan K.K.Page 8 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :JT11090001 FCC ID :K44409301 IC CN :282F-409301 10.10 Receiver Spurious Emission (Radiated) : Front view 10.10 Receiver Spurious Emission (Radiated) : Rear view Intertek Japan K.K.Page 9 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011