K44458300800MHz Digital Transceiver

NX-720H NX-720HG NX-820H NX-820HG NX-920 NX-920G VHF DIGITAL TRANSCEIVER UHF DIGITAL TRANSCEIVER 800MHz DIGITAL TRANSCEIVER INSTRUCTION MANUAL ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE VHF ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE UHF ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE 800MHz MODE D’EMPLOI TRANSCEPTOR DIGITAL VHF TRANSCEPTOR DIGITAL UHF TRANSCEPTOR DIGITAL 800MHz MANUAL DE INSTRUCCIONES © B62-2560-00 (K) 09 08 07 06 05 04 03 02 01 00 VHF DIGITAL TRANSCEIVER UHF DIGITAL TRANSCEIVER 800MHz DIGITAL TRANSCEIVER NX-720H NX-720HG NX-820H NX-820HG NX-920 NX-920G INSTRUCTION MANUAL ENGLISH Terminal Descriptions ACC (D-SUB 15 Pin Connector) Pin No.NameI/ODescriptionSpecifi cation 1SBODC Power (Switched B) Output13.6 V ±15% Max. 2 A 2IGNIIgintion Signal Input Min. Input: 10.8 V Max. Input: 16.0 V 3SP2/PAOLoudspeaker Output/ Public Address Output4  4DETOORX Detected Audio Output280 mV p-p (typ.) 5DATAIITX Data Input100 k 6FNC1/ TXDI/OProgrammable/ PC Serial Data from RadioHigh Impedance 7FNC1/ RXDI/OProgrammable/ PC Serial Data to RadioHigh Impedance 8FNC3I/OProgrammableHigh Impedance 9FNC4I/OProgrammableHigh Impedance 10FNC5I/OProgrammableHigh Impedance 11FNC6I/OProgrammableHigh Impedance 1250MCODC Power Output5 V, Max 100 mA 13HR1IHorn Alert Signal InputMax 2 A 14HR2OHorn Alert Signal OutputMax 2 A 15GND—GroundGround Speaker Jack (3.5 mm Phone Jack) 4 W/ 4  Pin No.NameI/ODescriptionSpecifi cation 1SPOOExternal Speaker Output4  3GND—GroundGround DC Input Connector Pin No.NameI/ODescriptionSpecifi cation RedBIDC Power Input13.6 V ±15% BlackGNDIGroundGround Microphone Jack Pin No.NameI/ODescriptionSpecifi cation 1BLCOBacklight ControlHigh Impedance 2SBODC Power (Switched B) Output13.6 V ±15% 3GND—GroundGround 4PTT/ TXD I/OPTT/ PC Serial Data from RadioHigh Impedance 5ME—Mic GroundGround 6MICIMic Signal Input600  7HOOK/ RXD IHook/ PC Serial Data to RadioHigh Impedance 8DMI/OMic Data DetectionHigh Impedance RF Antenna Terminal 50  impedance GPS Antenna Terminal <NX-720HG/ NX-820HG/ NX-920G only> 50  impedance i One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifi cations to this equipment may cause harmful interference unless the modifi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modifi cation is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. THANK YOU We are grateful you have chosen KENWOOD for your personal mobile applications. This instruction manual covers only the basic operations of your mobile radio. Ask your dealer for information on any customized features they may have added to your radio. NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed transmitters within the territories under government control. ◆ Illegal operation is punishable by fi ne and/or imprisonment. ◆ Refer service to qualifi ed technicians only. SAFETY: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. ◆ EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area. ◆ INJURY FROM RADIO FREQUENCY TRANSMISSIONS Do not operate your transceiver when somebody is either standing near to or touching the antenna, to avoid the possibility of radio frequency burns or related physical injury. ◆ DYNAMITE BLASTING CAPS Operating the transceiver within 500 feet (150 m) of dynamite blasting caps may cause them to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where “TURN OFF TWO-WAY RADIO” signs have been posted. If you are transporting blasting caps in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or removed from the container. ii CONTENTS GETTING STARTED ...................................................................................... 1 GETTING ACQUAINTED ............................................................................... 3 PROGRAMMABLE FUNCTIONS .................................................................. 5 BASIC OPERATIONS .................................................................................... 6 SCAN ............................................................................................................. 8 FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ....................... 10 TRUNKING CALLS (ANALOG) ................................................................... 12 DTMF CALLS............................................................................................... 13 ADVANCED OPERATIONS ......................................................................... 15 …

Text truncated - open the document above for the full version.

July 20th, 2012 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize any individual within Intertek Japan K.K. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This agreement expires one year from the current date. Sincerely, Tamaki Shimamura Communications Equipment Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

May 20th 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: NX-920G-K, NX-920-K FCC ID: K44458300. To whom it may concern: This letter serves as an official request for permanent confidentiality pursuant to 47 CFR Section 0.459 of the Commission Rules. We have requested that the Block Diagram, Schematic Diagrams, Circuit Description, Parts List, Active Devices and Tuning Procedure required to be submitted with this application be withheld from public review. The documents are company proprietary information that could never get into the possession of our competition. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communications Equipment Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Page 1 of 1 FCC ID: K44458300 IC: 282F-458300 CT Project: TCB-p1350029 From: Chris Harvey Date: June 5 th , 2013 1. The Circuit Description exhibit indicates that the Power Amplifier is amplified to 50W (5W in low power). This is likely a typo since this application is for a 15 W transmitter. Please confirm and update as needed. Lab – We had submitted the revised Circuit Description. 2. The MPE Measurement report should state compliance with IC RSS-102 and include the IC limit and units. Apsl, IC RSS-102 Annex A should document the worst case MPE measured value and not the limit. Lab – We had submitted the revised Annex A & B. 3. The RSP-100 Appendix A exhibit submitted also contained Appendix B and RSS-102 Annex A&B (with errors). Please resubmit the Appendix A exhibit without the additional information. CT – We had submitted the original IC Application as well as the revised split documents. However, it sounds like there are items on the Annex A & B that need your attention. Lab – We had submitted the revised Annex A & B. Response by: Koichi Wagatsuma Submitted by: Larissa Amaral Date: June 6 th , 2013

NX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 Front V iew Rear V iew NX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 Right V iew Lef t View NX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 Top View Bottom V iew (TK-920G-K) NX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 Bottom View (TK-920-K)

NX-920G-K, NX-920-K FCC ID: K444583 00 IC: 282F-458300 NX-920G -K NX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 NX-920 -K

NNX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 NNX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300 NNX-920G-K, NX-920-K FCC ID: K44458300 IC: 282F-458300

MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antennas. • Antenna Minimum Safe Distance: 20 cm (8 inches), 50% duty Cycle. • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits. • Antenna Mounting: The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the above indicated minimum safe distance to the antenna, i.e. 20 cm (8 inches) , 50% duty Cycle. • To comply with current FCC RF Exposure limits, the antenna must be ins talled at or exc eeding the min imum saf e dis tance sho wn above, and in accordance with the requirements of the antenna manufacturer or supplier. • Vehicle installation: The antenna can be mounted at the center of a vehicle metal roof or trunk lid, if the minimum safe distance is observed. • Base Sta tion Ins tallation: The ant enna sho uld be fi xed-mounted on an outdoor permanent structure. RF Exposure compliance must be addressed at the time of installation. Antenna substitution: Do not substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person or persons to excess radio frequency radiation. You may con tact you r rad io dea ler or the man ufacturer for fur ther ins tructions. Maintain a separation distance from the antenna to person(s) of at least 20 cm (8 inches), 50% duty Cycle. “This transmitter is authorized to operate with a maximum duty factor of 50%, in typical push-to-talk mode, for satisfying FCC RF exposure compliance requirements.” You, as the qualified end-user of this radio device must control the exposure conditions of bystanders to ensure the minimum separation distance (above) is maintained between the antenna and nearby persons for satisfying RF Exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work-related use, transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna. Transmit only when people outside the vehicle are at lea st the rec ommended min imum lat eral dis tance awa y fro m the ant enna/vehicle. B59-0000-00

TRUE FALSE 3 REGULATION :FCC Part 1.1310 RSS-102 Issue 4 JVC KENWOOD CorporationIntertek Japan K. K. Kashima Laboratory 1-16-2, Hakusan, Midori-ku, Yokohama-shiURL: http://www.japan.intertek-etlsemko.com Kanagawa, 226-8525 Japan3-2 Sunayama, Kamisu, Ibaraki Tel.: +81 45 939 6254314-0255 Japan Fax.: +81 45 939 6261Tel. +81 479 40 1097 Equipment type800MHz DIGTAL TRANSCEIVER TrademarkKENWOOD FCC Model(s)NX-920G-K,NX-920-K IC ModelNX-920G-K Serial No. FCC ID K44458300 IC CN and UPN 282F-458300 Test ResultComplied Report Number13040117JKA-004 Report issue date Revised issue date Approved byTested by Kazuo GokitaKoichi Wagatsuma [Manager] This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Applicant TEST REPORT Testing Laboratory May 27, 2013 00012042 June 10, 2013 Intertek Japan K.K.Page 1 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 TABLE OF CONTENTS Page SECTION 1. INFORMATION3 SECTION 2. TEST DATA4 SECTION 3. LIST OF MEASURING INSTRUMENTS7 Intertek Japan K.K.Page 2 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 SECTION 1. INFORMATION APPLICANT CompanyJVC KENWOOD Corporation Address1-16-2, Hakusan, Midori-ku, Yokohama-shi Kanagawa, 226-8525 Japan Contact PersonTamaki Shimamura Manager, Communications Equipment Division MANUFACTURER CompanyJVC KENWOOD Corporation Address1-16-2, Hakusan, Midori-ku, Yokohama-shi Kanagawa, 226-8525 Japan EQUIPMENT UNDER TEST Model No.NX-920G-K,NX-920-K Serial No.00012042 Frequency range806 to 824 MHz and 851 to 869 MHz Maximum Power Rating15W Duty cycle50% Collector Current, A9.0amps (Maximum) Collector Voltage, Vdc13.6Vdc Supply Voltage, Vdc13.6Vdc TEST DATE OF ISSUE AND TEST ENGINEER Revision Summary Revised DateSectionDescription of Changes ・Change of the original report number 13040117JK-002 to 13040117JKA-004 Test LocationKashima Immunity Test Room Date of IssueMay 07, 2013 Test EngineerKoichi Wagatsuma June 10, 2013 Cover page・Addition of regulation RS-102 issue 4 and IC model Intertek Japan K.K.Page 3 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 SECTION 2. TEST DATA The EUT was placed inside an anechoic chamber at height of 0.8 m to simulate being mounted on a vehicle. The isotropic probe was placed a distance of 0.2 cm from the EUT and power density was measured at 0.2 m increments from 0.2 m to 2.0 m with the peak value from each location being recorded in the corresponding data tables. The general population limit was applied to all measurements. The EUT is a PTT radio for mobile application with a peak power of 15 W. By allowing for an operational 50 % factor the power was reduced to 7.5 W for testing purposes yet transmitted continuously during the test. A 0 dBd antenna was utilized for testing. Measurement Result Probe Height (m) Peak Power Density (mW/cm 2 )(mW/cm 2 ) LimitResult 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.0030.54 0.0220.54 0.1020.54 0.2560.54 Pass 0.0060.54Pass Pass 0.0340.54Pass Pass 0.1140.54Pass 0.54Pass Pass 0.1620.54Pass 806.05 MHz 815.05 MHz Probe HeightPeak Power DensityLimitResult 0.0390.54Pass 0.014 (m) (mW/cm 2 )(mW/cm 2 ) 0.20.0040.54Pass 0.40.0080.54Pass 0.60.0320.54Pass 0.80.0350.54Pass 1.00.1120.54Pass 1.20.1140.54Pass 1.40.2880.54Pass 1.60.1770.54Pass 1.80.0440.54Pass 2.00.0150.54Pass Intertek Japan K.K.Page 4 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 823.95 MHz Probe HeightPeak Power DensityLimitResult (m) (mW/cm 2 )(mW/cm 2 ) 0.20.0070.55Pass 0.40.0150.55Pass 0.60.0570.55Pass 0.80.0520.55Pass 1.00.1460.55Pass 1.20.1590.55Pass 1.40.3860.55Pass 1.60.2580.55Pass 1.80.0580.55Pass 2.00.0210.55Pass 851.05 MHz Probe HeightPeak Power DensityLimitResult (m) (mW/cm 2 )(mW/cm 2 ) 0.20.0100.57Pass 0.40.0420.57Pass 0.60.1400.57Pass 0.80.1810.57Pass 1.00.1760.57Pass 1.20.2280.57Pass 1.40.4850.57Pass 1.60.3670.57Pass 1.80.1010.57Pass 2.00.0310.57Pass Intertek Japan K.K.Page 5 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 860.05 MHz Probe HeightPeak Power DensityLimitResult (m) (mW/cm 2 )(mW/cm 2 ) 0.20.0090.57Pass 0.40.0440.57Pass 0.60.1470.57Pass 0.80.2150.57Pass 1.00.2020.57Pass 1.20.2050.57Pass 1.40.4530.57Pass 1.60.3410.57Pass 1.80.0920.57Pass 2.00.0280.57Pass 868.95 MHz Probe HeightPeak Power DensityLimitResult (m) (mW/cm 2 )(mW/cm 2 ) 0.20.0080.58Pass 0.40.0390.58Pass 0.60.1350.58Pass 0.80.2370.58Pass 1.00.1920.58Pass 1.20.1730.58Pass 1.40.3790.58Pass 1.60.2480.58Pass 1.80.0850.58Pass 2.00.0230.58Pass Intertek Japan K.K.Page 6 of 7FJP-TE038 / Effective date: 13 May 2013 Report No.:13040117JKA-004 FCC ID:K44458300 IC CN:282F-458300 SECTION 3. LIST OF MEASURING INSTRUMENTS InstrumentModel No.Serial No.Manufacturer 2012/5/112013/5/31 Power SupplyGZV400090290931Daiichi denpa kogyo Cal DateCal Due Date N/AN/A 2013/1/152014/1/31 Digital Multi Meter 8846A Field Probe HI 6005130665ETS Lindgren 9642018FLUKE Intertek Japan K.K.Page 7 of 7FJP-TE038 / Effective date: 13 May 2013

Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 TRUE FALSE 3 REGULATION :FCC Part 2, 90 RSS-119 Issue 11 JVC KENWOOD CorporationIntertek Japan K. K. Kashima Laboratory 1-16-2, Hakusan, Midori-ku, Yokohama-shi3-2, Sunayama, Kamisu-shi, Ibaraki-ken Kanagawa, 226-8525 Japan314-0255 Japan Tel.: +81 45 939 6254Tel.: +81 479 40 1097 Fax.: +81 45 939 6261 Equipment type800MHz DIGTAL TRANSCEIVER TrademarkKENWOOD FCC Model(s)NX-920G-K, NX-920-K IC ModelNX-920G-K Serial No. FCC ID K44458300 IC CN and UPN 282F-458300 Test ResultComplied Report Number13040117JKA-005 Report issue date Revised issue date Approved byTested by Kazuo GokitaKoichi Wagatsuma [Manager] This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Applicant TEST REPORT Testing Laboratory May 29, 2013 00012042 June 10, 2013 Intertek Japan K.K.Page 1 of 84 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 In Accordance with FCC Rules and Regulations, Volume II, Part 2 and 90 Sub-part 2.1033 (c)(1) Applicant and Manufacture Information APPLICANT Company:JVC KENWOOD Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi Kanagawa, 226-8525 Japan Contact Person:Tamaki Shimamura Manager, Communications Equipment Division MANUFACTURER Company:JVC KENWOOD Corporation Address:1-16-2, Hakusan, Midori-ku, Yokohama-shi Kanagawa, 226-8525 Japan (c)(2) FCC ID FCC ID:K44458300 Model number:NX-920G-K, NX-920-K Serial number:00012042 (c)(3) Instruction Manual(S) Instruction manual(s):Please refer to attached Exhibits F (c)(4) Type of Emission Emission Designation :16K0F3E(Wide) / 14K0F3E(Wide) / 11K0F3E(Narrow) 8K30F1E(Narrow) / 8K30F1D(Narrow) / 8K30F7W(Narrow) 4K00F1E(Very Narrow) / 4K00F1D(Very Narrow) / 4K00F7W(Very Narrow) 4K00F2D(Very Narrow) (c)(5) Frequency range Frequency Range: (c)(6) Power Rating Output Power:5 to 15 W Type:Continuously Variable (c)(7) Maximum Power Rating Output Power:15 W Collector Current, A:9.0amps (Maximum) Collector Voltage, Vdc :13.6 Vdc Supply Voltage, Vdc:13.6 Vdc Other Information Number of Channel:Zone 128 max, Cannel 260 max. Maximum Deviation:± 5.0 kHz , ± 4.0 kHz , ± 2.5 kHz Frequency Stability:1.0ppm : Antenna Impedance:50 Ω Nominal Note including final transistor or solid-state device (c)(8): Voltages & currents in all elements in final RF stage, 806 to 824 MHz and 851 to 869 MHz(FCC/RSS) Intertek Japan K.K.Page 2 of 84 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 TABLE OF CONTENTS Page SECTION 1. GENERAL INFORMATION4 SECTION 2. SUMMARY OF TEST RESULT5 SECTION 3. TEST AND MEASUREMENT DATA6 SECTION 4. INFORMATION ABOUT EUT AND SUPPORT EQUIPMENT(S)7 SECTION 5. SUPPORT EQUIPMENT8 SECTION 6. USED CABLE(S)9 SECTION 7. TEST CONFIGURATION10 SECTION 8. OPERATING CONDITION11 SECTION 9. MEASUREMENT UNCERTAINTY12 SECTION 10. TEST DATA 10.1Carrier Output Power (Conducted)13 10.2Unwanted Emissions (Transmitter Conducted)15 10.3Field Strength of Spurious Radiation18 10.4Emission Masks (Occupied Bandwidth)24 10.5Transient Frequency Behavior46 10.6Audio Frequency Response / Audio Low Pass Filter (Voice Input)60 10.7Modulation Limiting65 10.8Frequency Stability (Temperature Variation)73 10.9Frequency Stability (Voltage Variation)77 10.10Receiver Spurious Emissions(Radiated)79 10.11Necessary Bandwidth and Emission Bandwidth83 APPENDIXPHOTOGRAPHS Intertek Japan K.K.Page 3 of 84 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 SECTION 1. GENERAL INFORMATION TEST PERFORMED LocationKashima No.1 Test Site and No.12 Test Site EUT Received Date of Testto Standard AppliedFCC Part 2, 90 RSS-119 Issue 11 Measurement Method Deviation from Standard(s)Not applicable QUALIFICATIONS OF TESTING LABORATORY(Kashima Lab.) ACCREDITATIONSCOPELAB. CODERemarks NVLAPEMC Testing100290-0USA VLACEMC TestingVLAC-008-1JAPAN BSMIEMC TestingSL2-IN-E-6008TAIWAN FILING VCCIEMC TestingJAPAN FCCEMC TestingDesignation Number:JP0008 ICEMC TestingIC-2042K-1, IC-2042K-3, , IC-2042Q-12CANADA CB-SchemeEMC TestingTL222IECEE SAUDI ARABIAEMC TestingN/A ABBREVIATIONS EUTDoC AMNISN LISNQ-P AMPAVG ATTPK ANTCal BBAN/A DIPLCD AEAssociated Equipment4LEVEL FSK 4LEVEL Frequency Shift Key GMSKCW ID FMC4FM PTTPush to TalkAFC Revision Summary Revised DateSectionDescription of Changes Cover page ・Addition of IC Model ・Change of the original report number 13040117JKA-003 to 13040117JKA-005 June 10, 2013 A-0126 ANSI/TIA-603-D-2010 / RSS-119 Issue 11(2011), RSS-Gen Issue 3(2010) Average Line Impedance Stabilization Network Equipment Under Test Artificial Mains Network Calibration Impedance Stabilization Network Peak Declaration of Conformity Quasi-peak Attenuator Antenna Broadband Antenna April 23, 2013 Amplifier April 24, 2013May 22, 2013 Dipole AntennaLiquid-Crystal Display Not applicable or Not available Automatic frequency control Gaussian Maximum Shift Key Frequency ModulationConstant envelope 4 Level FM Continuously Repeating bit stream Intertek Japan K.K.Page 4 of 84 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No…

Text truncated - open the document above for the full version.

Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 APPENDIX Intertek Japan K.K.Page 1 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 PHOTOGRAPHS OF MEASUREMENT SET-UP 10.1 Carrier Output Power (Conducted) <FM Modulation Case> <CW ID Modulation Case> Intertek Japan K.K.Page 2 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.2 Unwanted Emission (Conducted Spurious) Intertek Japan K.K.Page 3 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.3 Field Stren gth of Spurious Radiation : Front view 10.3 Field Stren gth of Spurious Radiation : Rear view Intertek Japan K.K.Page 4 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.4 Emission Masks <CW ID Modulation Case> <FM Modulation Case> Intertek Japan K.K.Page 5 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.5 Transient Fre quency Behavior 10.6 Audio Fre quency Response Intertek Japan K.K.Page 6 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.7 Modulation Limitin g Intertek Japan K.K.Page 7 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.8, 10.9 Fre quency Stability : Outer view 10.8, 10.9 Fre quency Stability : Inner view Intertek Japan K.K.Page 8 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011 Report No :13040117JKA-005 FCC ID :K44458300 IC CN :282F-458300 10.10 Receiver S purious Emission (Radiated) : Front view 10.10 Receiver S purious Emission (Radiated) : Rear view Intertek Japan K.K.Page 9 of 9 FJP-TE031 Ver.1.0 Effective Date:January 4, 2011