K5MRF-204PU24Gamepad

RF-2.4G Gamepad User’s Manual Introduction Thank you for choosing this innovative RF Gamepad. This gamepad not only can be compatible with both PC and PS, but also be equipped with a high 2.4G RF technology. To satisfy users this gamepad is expanded the Macro and Turbo function, users, can perfectly enjoy the convenience and exciting playing with this gamepad. Package Contents Gamepad *1 Receiver *1 USB Cable *1 CD Driver *1 User Manual *1 System Requirement PC 1. IBM PC 586/PentiumII compatibles or higher 2. Available USB port or extension USB hub 3. CD-ROM drive 4. Microsoft Windows XP/ME/2000/98 recommended PlayStation 1. PlayStation 2 / PSOne / PlayStation RF-2.4G PC Combo PS2 Gamepad Hardware Overview Receiver 1. 1 Connection Button 2. 2 LED Indicator (One is connection indicator and another is low-battery indicator.) 3. 1 USB Connector for PC Gamepad PC PlayStation Eight ways D-Pad Eight ways D-Pad Button 1, 2, 3, 4 ,,, Button 5, 6, 7, 8, 11, 12 L1, L2, L3, R1, R2, R3 Button 9, 10 Select, Start Analog Ministick Analog/Digital switching button Program (Macro/Turbo) button Vibration/Connection button Red/Green/Orange LED indicator Operation Reference 1. Gamepad Calibration Before using this gamepad, please rotate the sticks once to calibrate perfectly. 2. Connect Gamepad with Receiver Please follow below steps to connect the gamepad with the receiver. 1) Press and hold the Connection/Vibration button of the gamepad until the Mode- LED twinkles with orange color. 2) Press the button of the receiver to connect with each other. > LED indicator: Condition Online Off line Connecting Connection -LED ON OFF Twinkle & Orange 3. Analog/ Digital Switching This gamepad is equipped with Digital and Analog modes. And there are some different features with PC and PlayStation modes in A/D modes as followings: > PC Gamepad Analog Digital D-pad POV HAT X&Y Axis motion Left Mini-stick X&Y Axis motion POV HAT Right Mini-stick Throttle& Rudder Throttle& Rudder Button 11, 12 Normal function No function Other Buttons Normal function Normal function Mode-LED Indicator Red Green > PlayStation You can switch between digital and analog modes. The Mode-LED turns ON with red color in Analog mode and with green color in Digital mode. When the gamepad is in Analog mode, the following buttons and sticks may operate in Analog fashion depending on the features supported by the software title. Refer to the software manual for details. PlayStation2 format software D-Pad / ,,, / 2 ministicks / L1, L2, R1, R2 PlayStation format software 2 ministicks 4. Vibration Function You can switch the vibration function ON or OFF by pressing the Vibration Connection button. >LED indicator: Vibration ON Vibration OFF Mode-LED Twinkle ON 5. Macro function There are four buttons (L2, L3, R2, R3) allowed being set as the macro buttons. Please follow below steps to set up the macro function. 1) Press the Program button to set up the macro function. 2) Press one of four buttons (L2, L3, R2, R3) which you want to set as a macro button. 3) Press the buttons (D-Pad, ,,,, L1, R1, L2, R2, L3, R3, Start) in turn to set into the Macro function. 4) Press the Program button again to finish the Macro function setup. > LED indicator Steps of the Macro set Step 1) Step 2) Step 3) Step 4) Mode-LED Orange Twinkle & Orange OFF. Connection- LED OFF. OFF ON 6. Turbo function Please follow below steps to set up the Turbo function. 1) Press the Program button. 2) Press the buttons (,,,, L1, R1, Start) which you want to set with the Turbo function. Note: If you want to remove the Turbo function, please repeat the above steps. > LED indicator Steps of the Turbo set Step 1) Step 2) Mode-LED Orange OFF Connection-LED OFF ON Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. Warning: As shieded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shieded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Immersion Patent “Protected by one or more patents of Immersion Corporation. A list of applicable patents can be found on Immersion’s website at www.immersion.com.” All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. For more information or any services are required, please visit us through the Internet link Website: http://www.rockfire.com.tw e-mail: [email protected] 7. LED Indicator while operating The Mode-LED indicates as the following table when you press any button: Mode Analog Digital…

Text truncated - open the document above for the full version.

NEUTRON EMC LAB. Project No.05E0157 2/37 TX/ Model No.: RF-204PU Charger 05E0157 05E0157 NEUTRON EMC LAB. Project No.05E0157 7/37 05E0157 05E0157 TX/ Model No.: RF-204PU NEUTRON EMC LAB. Project No.05E0157 12/37 TX/ Model No.: RF-204P 05E0157 05E0157 NEUTRON EMC LAB. Project No.05E0157 17/37 05E0157 05E0157 TX/ Model No.: RF-204U NEUTRON EMC LAB. Project No.05E0157 34/37 05E0157 05E0157 Adaptor/ Model No.: KA12D090050034U NEUTRON EMC LAB. Project No.05E0157 35/37 05E0157 05E0157 Adaptor/ Model No.: KA12D090050034U NEUTRON EMC LAB. Project No.05E0157 37/37 05E0157

NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 28/32 Attachment – B. Product Labeling NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 29/32 n FCC ID label – The remained portion of label statement required by FCC is attached in the user’s manual. Location of Label on EUT -- 0.2 cm 1.9 cm

NEUTRON EMC LAB. Project No.05E0157 3/37 05E0157 05E0157 TX/ Model No.: RF-204PU Charger NEUTRON EMC LAB. Project No.05E0157 4/37 05E0157 05E0157 TX/ Model No.: RF-204PU Charger NEUTRON EMC LAB. Project No.05E0157 5/37 05E0157 05E0157 TX/ Model No.: RF-204PU Charger NEUTRON EMC LAB. Project No.05E0157 6/37 05E0157 05E0157 TX/ Model No.: RF-204PU Charger NEUTRON EMC LAB. Project No.05E0157 8/37 05E0157 05E0157 TX/ Model No.: RF-204PU NEUTRON EMC LAB. Project No.05E0157 9/37 05E0157 05E0157 TX/ Model No.: RF-204PU NEUTRON EMC LAB. Project No.05E0157 10/37 05E0157 05E0157 TX/ Model No.: RF-204PU NEUTRON EMC LAB. Project No.05E0157 11/37 05E0157 05E0157 TX/ Model No.: RF-204PU NEUTRON EMC LAB. Project No.05E0157 13/37 05E0157 05E0157 TX/ Model No.: RF-204P NEUTRON EMC LAB. Project No.05E0157 14/37 05E0157 05E0157 TX/ Model No.: RF-204P NEUTRON EMC LAB. Project No.05E0157 15/37 05E0157 05E0157 TX/ Model No.: RF-204P NEUTRON EMC LAB. Project No.05E0157 16/37 05E0157 05E0157 TX/ Model No.: RF-204P NEUTRON EMC LAB. Project No.05E0157 18/37 05E0157 05E0157 TX/ Model No.: RF-204U NEUTRON EMC LAB. Project No.05E0157 19/37 05E0157 05E0157 TX/ Model No.: RF-204U NEUTRON EMC LAB. Project No.05E0157 20/37 05E0157 05E0157 TX/ Model No.: RF-204U NEUTRON EMC LAB. Project No.05E0157 21/37 05E0157 05E0157 TX/ Model No.: RF-204U NEUTRON EMC LAB. Project No.05E0157 36/37 05E0157 05E0157 Adaptor/ Model No.: KA12D090050034U

Operation Description This is wireless 2.4G PC& PS Game Pad,Model:RF-204 ,Frequency: 2.4G. Its emitter power supplied by 4 pieces of NIMI battery, total voltage: 4.8V DC, The main IC (SN8P1708) Scan to Button , Signals transmitted by 2.4G RF Module when the voltage under 3.3V. It will be remained to charge by LED on. Receiver’s Task: 1?Surface covered by USB (Receiver supplied by PC power) RF signal is converted by 2.4G RF module, and deal led by IC(SN8P1704), then send the signal to PC by IC (CY7C63001) to make data conversion. 2? Surface covered by PS2 (Receiver supplied by PS2 power) RF high-frequency signal is converted by 2.4G RF module, and deal led by IC (SN8P1704), and then send the signal to PC by IC (CY7C63001) to make data conversion.

NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 2/32 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations , inferences or generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Assessment Authorities Test Standard/Scope/Item Acceptance FCC Part 15 Subpart B IEC/CISPR22 AS/NZS 3548 CNS 13438 FCC Part 15 Subpart B CISPR 22/EN 55022 AS/NZS 3548 VCCI -Technical Requirement CNS 13438 SS IEC/CISPR 22 IEC/EN 61000-3-2 IEC/EN 61000-4-5 IEC/EN 61000-3-3 IEC/EN 61000-4-6 IEC/EN 61000-4-2 IEC/EN 61000-4-8 IEC/EN 61000-4-3 IEC/EN 61000-4-11 IEC/EN 61000-4-4 NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 3/32 Table of Contents Page 1 General Information 5 1.1 Applicant 5 1.2 Manufacturer 5 1.3 Equipment Under Tested 5 1.4 OEM Brand/Model 5 1.5 Model Difference (Series, Versions, if any) 5 1.6 Product Descriptions(Application/Features/Specification) 6 1.7 Connecting I/O Port(s) 6 1.8 Power Supplied 6 1.9 Products Covered (if applicable) 6 1.10 Description of Test Mode(s) 6 1.11 EUT Modifications 6 2 RFI Emissions Measurement 7 2.1 Test Facility 7 2.2 Standard Compliance 7 2.3 Test Conditions and Channel 7 2.4 Test Methodology 7 2.5 Deviations from Standard Test Method 8 2.6 Sample(s) Tested 8 2.7 Measurement Instrument 8 2.8 Measurement Uncertainty 8 2.9 Tested System Set-Up/Configuration Details 8 Table -1 Equipments Used in Tested System 10 Diagram -1 Block diagram showing the configuration of system tested 10 Table - 2 Equipments Used in Tested System 11 Table - 3 Information of Interface Cable 11 2.10 EUT Operating Conditions 12 3 Justification 13 3.1 Limitations 13 3.1.1 Power Line Conducted Emission 13 3.1.2 Radiated Emission Limits 13 3.2 Measurement Justification 14 3.2.1 Conducted Emission 14 3.2.2 Radiated Emission 14 3.2.3 Field Strength Calculation 15 3.3 Measurement Data 15 Table 4 Conducted Emission Data 15 Table 5 Radiated Emission Data 15 NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 4/32 Table of Contents Page Attachment 24 A. EUT Test Photos 25 B. Product Labeling 28 C. Bandwidth Requirement 30 NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 5/32 1. General Information 1.1 Applicant Name Charm Winner CO., LTD Address 18F-3, NO. 75, SEC. 1, HSIN TAI WU RD., HIS-CHIH TAIPEI HSIEN, TAIWAN R.O.C. 1.2 Manufacturer Name N/A Address N/A 1.3 Equipment Under Tested Name: Gamepad Trade Name: Rockfire Model No.: RF-204PU Charger; RF-204PU; RF-204P; RF-204U 1.4 OEM Brand/Model (if applicable) OEM Brand(s)/Model(s) except the basic model in sub-clause 1.3 is(are) the follows: OEM Brand: N/A Model No.: N/A 1.5 Model Difference (Series, Versions, if any) Except the basic model no. (model designation of the sample tested in this test report), additional model no. covered is(are) : There are some models based on similar electrical circuit except the difference of charger Function. Charger Function Model No. Yes No RF-204PU Charger ̧ X RF-204PU; RF-204P; RF-204U X ̧ All the above models were tested, and the model: RF-204PU Charger was found to be the worst case during the pr-scanning test. This mode of the worst case was used for final testing and collecting test data included in this report. NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 6/32 1.6 Product Descriptions(Application/Features/Specification) The EUT is a/an Gamepad. A major technical descriptions of EUT is described as following: Operation Frequency 2404~2480 MHz Modulation Type GFSK Bit Rate of Transmitter 1 Mbps Channel Bandwidth 1MHz Antenna Designation Printed Antenna Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. 1.7 Connecting I/O Port(s) Please refer to the User's Manual. 1.8 Power Supplied Power Source: Battery supplied or DC Voltage supplied from AC/DC adapter. Power Cord: Detachable, non-shielded type. Power Rating: AC I/P 120V, 60Hz / DC O/P 9V, 500mA 1.9 Products Covered (if applicable) The sample tested including the following sub-system/module/accessory : Sub-system/ Module/ Accessory Model/Type No. Int. Inst./ Ext. Cont. Adaptor KA12D090050034U Ext. Cont. 1.10 Description of Test Mode(s) To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Mode 1 EUT(Tx) power by adapter (Conducted Emission & Radiated Emission) Mode 2 EUT(Tx) power by batt…

Text truncated - open the document above for the full version.

NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 30/32 Attachment – C. Restricted Bands Requirements NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 31/32 Bandwidth Requirement NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 32/32 Bandwidth Requirement

NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 25/32 Attachment - A. EUT Test Photos 1. Conducted Measurement Photos 2. Radiated Measurement Photos NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 26/32 Conducted Measurement Photos NEUTRON EMC LAB. Report No.NEI-FCCP-1-05E0157 27/32 Radiated Measurement Photos