K66FT-8900RAmateur Scanning Receiver

FCC ID: K66FT-8900R O PERATING M ANUAL Vertex Standard Co., Ltd. 1 FT-8900R Operating Manual FT-8900R Operating ManualFT-8900R Operating Manual FT-8900R Operating Manual Front Panel Controls & Switches Front Panel Controls & SwitchesFront Panel Controls & Switches Front Panel Controls & Switches (1) “Left” DIAL knob This 20-position detended rotary switch is the tuning dial for the “ left leftleft left” band. Press this knob momentarily to switch the “Main band” to the “ left leftleft left” band. When the “ left leftleft left” band is set to the “Main band” with the VFO mode, press this knob to enable the rapidly tuning (in 1 MHz step) by this knob. Press and hold this knob for 1/2 second, move the operating band on the “ ““ “left leftleft left” band as following: 144 MHz Æ 430 MHz Æ 29 MHz Æ 50 MHz Æ 144 MHz ...... (2) “Left” VOL -/- SQL Knob The inner VOL (Volume) control adjusts the speaker audio level form the “ left leftleft left” receiver. Clockwise rotation increases the audio level. Press this knob momentarily to switch the Internet Connection feature “on” and “off.” The outer SQL (Squelch) control is used to silence background noise on the “ left leftleft left” receiver. It should be advanced clockwise just to the point where the noise is silenced (and the “BUSY” indicator on the display turns off), so as to provide the best sensitivity to weak signals. (3) Hyper Memory Button ([1] ~ [6]) Press and hold the one of these buttons for 2 seconds, store the total current configuration of the radio into a special “Hyper” memory bank. Press the appropriate button momentarily, recall the desired “Hyper” memory. (4) “Left” [LOW] Key Press this key momentarily to select the transmitter power output level of the “ left leftleft left” band (“LOW,” “MID2,” “MID1,” or “HIGH”). When the “ left leftleft left” band is set to the Memory mode or Home Channel, press and hold this key for 1/2 second to switch the memory channel display between the “Frequency” and “Alpha-numeric Tag.” (5) “Left” [V/M] Key FCC ID: K66FT-8900R O PERATING M ANUAL Vertex Standard Co., Ltd. 2 Press this key momentarily to switch the frequency control for the “ left leftleft left” band between the VFO and Memory System. When the “ left leftleft left” band is set to the VFO mode, press and hold this for 1/2 second to activates the Smart Search Feature. When the “ left leftleft left” band is set to the Memory mode, press and hold this key for 1/2 second to shift the “memory Tuning” feature. (6) “Left” [HM] Key Press this key momentarily to recall a favorite “Home” frequency memory. Press and hold this for 1/2 second to activates the Priority Channel Scanning. (7) “Left” [SCN] Key Press this key momentarily to activates the Scanner on the “ left leftleft left” band. When the “ left leftleft left” band is set to the Memory mode, press and hold this key for 1/2 second to setup the Scan Skip List or Preferential Scan List. (8) [SET] Key Press this key momentarily to enter the Set mode. Press and hold this for 1/2 second to transfer the contents of the “Main band” VFO into a Memory register. Important ImportantImportant Important Note Note Note Note: The “right” side ([LOW], [V/M], [HM], and [SCN]) keys may be select two functions via the Menu #21 (KEY.MOD). See page ?? for selecting procedure. (9) “Right” [LOW] Key ([MHz] Key) Key Mode “1” (Default) Press this key momentarily to select the transmitter power output level of the “ right rightright right” band (“LOW,” “MID2,” “MID1,” or “HIGH”). When the “ right rightright right” band is set to the Memory mode or Home Channel, press and hold this key for 1/2 second to switch the memory channel display between the “Frequency” and “Alpha-numeric Tag.” Key Mode “2” Press this key momentarily to allows tuning in 1-MHz step on the “Main” band VFO. Press and hold this key for 1/2 second to allows tuning in 10-MHz step on the FCC ID: K66FT-8900R O PERATING M ANUAL Vertex Standard Co., Ltd. 3 “Main” band VFO. (10) “Right” [V/M] Key ([REV] Key) Key Mode “1” (Default) Press this key momentarily to switch the frequency control for the “right rightright right” band between the VFO and Memory System. When the “ right rightright right” band is set to the VFO mode, press and hold this for 1/2 second to activates the Smart Search Feature. When the “ right rightright right” band is set to the Memory mode, press and hold this key for 1/2 second to shift the “memory Tuning” feature. Key Mode “2” Press this key momentarily to reverses the transmit and receive frequencies on the “Main” band during split-frequency operation. Press and hold this key for 1/2 second to change the frequency shift direction: RPT – (minus shift), RPT + (plus shift), RPT OFF (simplex). (11) “Right” [HM] Key ([TONE] Key) Key Mode “1” (Default) Press this key momentarily to recall a favorite “Home” frequency memory. Press and hold this for 1/2 second to activates the Priority Channel Scanning. Key Mode “2” Press this key momentarily to change the Tone Squelch mode: ENC (CTCSS Encoder), ENC.DEC (CTCSS Tone Squelch), or DCS (DCS) operation. (12) “Right” [SCN] Key ([SUB] Key) Key Mode “1” (Default) Press this key momentarily to activates the Scanner on the “Right RightRight Right” band. When the “ Right RightRight Right” band is set to the Memory mode, press and hold this key for 1/2 second to setup the Scan Skip List or Preferential Scan List. Key Mode “2” Press this key momentarily to make a following key act on the “Sub” band (“MAIN” icon blinks on the “Sub” band). FCC ID: K66FT-8900R O PERATING M ANUAL Vertex Standard Co., Ltd. 4 (13) VOL -/- SQL Knob (Right) The inner VOL (Volume) control adjusts the speaker audio level form the “ right rightright right” receiver. Clockwise rotation increases the audio level. Press this knob momentarily to turn the radio “on” and “off.” The outer SQL (Squelch) control is used to silence background noise on the “ right rightright right” receiver. It should be advanced clockwise just to the poin…

Text truncated - open the document above for the full version.

C:\windows\TEMP\probonholdemail.doc TIMCOTIMCO ENGINEERING INC. 849 NW State Road 45 Newberry, Florida 32669 http://www.timcoengr.com 888.472.2424 F 352.472.2030 email: [email protected] June 13, 2002 FCC SUBJECT: COMMUNICATIONS SUMMARY FOR VERTEX STANDARD CO., LTD. FCC ID: K66FT-8900R To those concerned: The FCC ID of this device, as it is certified, was changed during the application review at the request of the applicant. Key exhibits such as the FCC ID label sample, 731 Form, Confidentiality Request Letter and Users Manual were obtained and reflect the correct FCC ID. The remaining exhibits refer to an incorrect FCC ID. This is not a mistake and was taken into account during the application review. All documents submitted with this application are indeed for the device FCC ID: K66FT-8900R. Sincerely, Eric Dobson Quality Manager Timco Engineering, Inc.

FCC ID: K66FT-8900M Vertex Standard Co., Ltd. Front view Rear view FCC ID: K66FT-8900M Vertex Standard Co., Ltd. Top view Bottom view FCC ID: K66FT-8900M Vertex Standard Co., Ltd. Left side view Right side view FCC ID: K66FT-8900M Vertex Standard Co., Ltd. Sub Panel Rear of Panel

FCC ID: K66FT-8900M MFA p0250009, d0250071 C E R T I F I C A T I O N of RECEIVER MODEL: FT-8900R FCC ID: K66FT-8900R to FEDERAL COMMUNICATIONS COMMISSION Part 15(B) (New) DATE OF REPORT: May 30, 2002 ON THE BEHALF OF THE APPLICANT: Vertex Standard Co., Ltd. AT THE REQUEST OF : P.O. UPS 5/21/2002 Vertex Standard USA Inc. 10900 Walker Street Cypress, CA 90630 Attention of: Mikio Maruya, Executive Vice President (800) 255-9237; FAX: (800) 477-9237 (714) 827-7600; FAX: -8100 [email protected] SUPERVISED BY: Morton Flom, P. Eng. FCC ID: K66FT-8900M MFA p0250009, d0250071 TABLE OF CONTENTS RULE DESCRIPTION PAGE 2.948 Description of Measurement Facilities 1 15.109 Receiver Spurious Emissions (Radiated) 6 15.121(b) Scanning Receiver 12 FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 1 of 13. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) TEST REPORT b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d0250071 d) Client: Vertex Standard USA Inc. 10900 Walker Street Cypress, CA 90630 e) Identification: FT-8900M FCC ID: K66FT-8900M Description: Scanning Receiver f) EUT Condition: Not required unless specified in individual tests. g) Report Date: May 30, 2002 EUT Received: April 24, 2002 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: Morton Flom, P. Eng. n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 2 of 13. M. Flom Associates, Inc. is accredited by the American Association for Laboratory Association (A2LA) as shown in the scope below. "This laboratory is accredited by the American Association for Laboratory Accreditation (A2LA) and the results shown in this report have been determined in accordance with the laboratory's terms of accreditation unless stated otherwise in the report." Should this report contain any data for tests for which we are not accredited, or which have been undertaken by a subcontractor that is not A2LA accredited, such data would not covered by this laboratory's A2LA accreditation. FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 3 of 13. GENERAL INFORMATION Part 2.948: (a)(b) DESCRIPTION OF MEASUREMENT FACILITIES: FILE: 31040/SIT A description of the measurement facilities was filed with the Commission and was found to be in compliance with the requirements of Section 2.948, by letter dated March 13, 2000. All pertinent changes will be reported to the Commission by up-date prior to March 2003. (b)(4) SUPPORTING STRUCTURES: SKETCH - ATTACHED EXHIBITS (b)(5)(6) TEST INSTRUMENTATION: LIST - SEE EXHIBITS 2.925: IDENTIFICATION OF AN AUTHORIZED DEVICE: DRAWING - SEE EXHIBITS LOCATION OF LABEL - SEE PHOTOS NAME AND ADDRESS OF APPLICANT : Vertex Standard Co., Ltd. 4-8-8 Nakameguro, Meguro-Ku Tokyo 153-8644 Japan FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 4 of 13. 2.911: 2.1033(b)(6) TECHNICAL REPORT MANUFACTURER: Vertex Standard Co., Ltd. 4-8-8 Nakameguro, Meguro-Ku Tokyo 153-8644 Japan FCC ID: K66FT-8900M MODEL NO: FT-8900M PHOTOGRAPHS: SEE LIST OF EXHIBITS DUT DESCRIPTION: This unit Passes 15.31 : MEASUREMENT STANDARD & PROCEDURE: IEEE STANDARD 187 WAS USED AS A GUIDE. FCC MEASUREMENT PROCEDURE MP-1 x ANSI 63.4 (1992/2000) “Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz.” FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 5 of 13. EXPOSITORY STATEMENT 1. NUMBER OF BANDS = 6 2. NUMBER OF CHANNELS = 18 3. TUNING RANGE, MHz = 20 to 39.0 40 to 90 100 to 190 300 to 400 400 to 520 700 to 1,000 4. OSCILLATOR RANGE, MHz = 65.05 to 84.05 85.05 to 113.125 145.05 to 235.05 345.05 to 445.045 354.95 to 474.4 654.95 to 949.09 5. I.F., MHz = 45.05 6. BLOCK DIAGRAM = ATTACHED 7. For cellular receiver only, the radio transceiver meets the requirements of FCC Bulletin OET 53 ("Cellular System Mobile Stations-Land-System Compatibility Specification."). See attached affidavit. 15.203 : ANTENNA REQUIREMENT: The antenna is permanently attached to the EUT The antenna uses a unique coupling The EUT must be professionally installed x The antenna requirement does not apply SUPERVISED BY: Morton Flom, P. Eng. FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 6 of 13. NAME OF TEST: Receiver Spurious Emissions (Radiated) SPECIFICATION: 15.109: Radiated Interference Limits 15.33: Frequency Range of Radiated Measurements 80.217: Suppression of Interference Aboard Ships GUIDE: See measurement procedure below TEST CONDITIONS: Standard Temperature & Humidity TEST EQUIPMENT: As per attached page SEARCH ANTENNAS: 100 Hz - 50 MHz: Emco 3301B Active Rod 10 kHz - 32 MHz: Singer 94593-1 Loop 25 MHz - 300 MHz: Emco 3109 Biconical 200 MHz - 1 GHz: Aprel 2001 Log Periodic 1 GHz - 18 GHz: Emco 3115 Horn 10 GHz - 40 GHz: Emco 3116 Horn with HP11970A Mixer MEASUREMENT PROCEDURE 1. At first, bench tests were performed to locate the spurious emissions at the antenna terminals. 2. In the field, tests were conducted over the range shown, The test sample was set up on a wooden turntable above ground, and at a distance of three meters from the antenna connected tot he Spectrum Analyzer. 3. In order to obtain the maximum response at each frequency, the turntable was rotated, and the search antenna was raised and lowered. The EUT was also adjusted for maximum response. Tests were conducted in Horizontal & Vertical polarization modes. 4. The field strength was calculated from: E μV/m @ 3 m = Log 10 -1 (dBμV + A.F. + C.L.) 20 5. MEASUREMENT RESULTS: Attached for "Worst Case" conditions. FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 7 of 13. RADIATED TEST SETUP NOTES: (a)Search Antenna…

Text truncated - open the document above for the full version.

FCC ID: K66FT-8900M MFA p0250009, d0250071 PAGE NO. 8 of 13. TEST SETUP: Radiated Emissions g0250205: 2002-May-22 Wed 16:23:58 STATE: 0:General TEST SETUP: Radiated Emissions g0250207: 2002-May-23 Thu 11:13:39 STATE: 0:General