KDS-PWX-100Remote Flash Control Transceiver

Quick Guide Help | Hilfe | Hilfe | Hilfe | Hilfe [email protected] wiki.PocketWizard.com Register | Enregistrer | Registro | Registrieren | Registro PocketWizard.com/support Compatible with all Standard Channel-Capable PocketWizard Radios: Passend für alle Standard Channel-Capable PocketWizard Radios: Passend für alle Standard Channel-Capable PocketWizard Radios: Passend für alle Standard Channel-Capable PocketWizard Radios: Passend für alle Standard Channel-Capable PocketWizard Radios: Plus III, Plus II, Plus, MultiMAX, MAX, Classic, MiniTT1, FlexTT5, PowerST4, PowerMC2 ® 3.5mm (1/8") –> PC (PC3N)3.5mm (1/8") –> 6.35mm (1/4") (MFPM) 3.5mm (1/8") –> 3.5mm (1/8") (MM3)Lanyard | Lanyard | Lanyard | Lanyard | Lanyard PocketWizard PlusX Is an Auto-Sensing Transceiver that operates as a radio transmitter or receiver as needed for wireless flash sync or camera shutter release. Ist ein Auto-Sensing-Transceiver, der als Radio-Sender oder Empfänger arbeitet je nach Bedarf für entfernte flash Sync oder Kamera-Auslöser. Ist ein Auto-Sensing-Transceiver, der als Radio-Sender oder Empfänger arbeitet je nach Bedarf für entfernte flash Sync oder Kamera-Auslöser. Ist ein Auto-Sensing-Transceiver, der als Radio-Sender oder Empfänger arbeitet je nach Bedarf für entfernte flash Sync oder Kamera-Auslöser. Ist ein Auto-Sensing-Transceiver, der als Radio-Sender oder Empfänger arbeitet je nach Bedarf für entfernte flash Sync oder Kamera-Auslöser. NOTE: You need at least two PocketWizard radios! Hinweis: Sie benötigen mindestens zwei PocketWizard Radios! Hinweis: Sie benötigen mindestens zwei PocketWizard Radios! Hinweis: Sie benötigen mindestens zwei PocketWizard Radios! Hinweis: Sie benötigen mindestens zwei PocketWizard Radios! Included | Inclus | Incluido | Enthalten | Incluso: 2 | PocketWizard PlusX OVERVIEW | Übersicht | Übersicht | Übersicht | Übersicht FCC/IC and CE radios are not compatible with each other. FCC/IC und CE-Radios sind nicht miteinander kompatibel. FCC/IC und CE-Radios sind nicht miteinander kompatibel. FCC/IC und CE-Radios sind nicht miteinander kompatibel. FCC/IC und CE-Radios sind nicht miteinander kompatibel. PocketWizard.com/wheretobuy/frequency For | Für | Für | Für | Für Model: PX-CE 433.62 MHz Pat. www.pwpatents.com Made in USA Model: PX-FCC FCC ID: KDS-PWX-100 IC: 2170A-PWX100 344.04 MHz Pat. www.pwpatents.com Made in USA Model: PX-CE 433.62 MHz Pat. www.pwpatents.com Made in USA Model: PX-FCC FCC ID: KDS-PWX-100 IC: 2170A-PWX100 344.04 MHz Pat. www.pwpatents.com Made in USA FCC/IC: 344.04 MHz (< 1 mW) CE: 433.62 MHz (< 1mW ) PocketWizard.com | 3 FREQUENCY | Frequenz | Frequenz | Frequenz | Frequenz Status LED Status-LED Status-LED Status-LED Status-LED Lanyard Mount Schlüsselband-Mount Schlüsselband-Mount Schlüsselband-Mount Schlüsselband-Mount Power Switch interrupteur de puissance Interruptor de encendido Macht Interruttore di alimentazione Flash / Camera Port Flash / Kamera-Anschluss Flash / Kamera-Anschluss Flash / Kamera-Anschluss Flash / Kamera-Anschluss 3.5mm (1/8") Test Button Drücken Sie, um zu testen Drücken Sie, um zu testen Drücken Sie, um zu testen Drücken Sie, um zu testen 10 Standard Channels 10 Standard-Programme 10 Standard-Programme 10 Standard-Programme 10 Standard-Programme 4 | PocketWizard PlusX ® Battery Orientation Batterie-Orientierung Batterie-Orientierung Batterie-Orientierung Batterie-Orientierung 2 x AA / LR6 1.5V 1/4"-20 Mount 1/4"-20 Mount 1/4"-20 Mount 1/4"-20 Mount 1/4"-20 Mount Internal Antenna Interne Antenne Interne Antenne Interne Antenne Interne Antenne Hot Shoe with Locking Ring Blitzschuh mit Sicherungsring Blitzschuh mit Sicherungsring Blitzschuh mit Sicherungsring Blitzschuh mit Sicherungsring Battery Door and Latch Batteriefach und Latch Batteriefach und Latch Batteriefach und Latch Batteriefach und Latch PocketWizard.com | 5 ® Connect Transmitter Transmitter verbinden Transmitter verbinden Transmitter verbinden Transmitter verbinden Set Channel Kanal Set Kanal Set Kanal Set Kanal Set Power On Schalten Sie Schalten Sie Schalten Sie Schalten Sie Alternative Fakultativ Fakultativ Fakultativ Fakultativ 1 1 3 2 1 2 3 6 | PocketWizard PlusX OPERATION | OpératiOn | Operación | BetrieB | OperaziOne Connect Receivers Receiver verbinden Receiver verbinden Receiver verbinden Receiver verbinden Match Channel Match-Kanal Match-Kanal Match-Kanal Match-Kanal Power On Schalten Sie Schalten Sie Schalten Sie Schalten Sie Take pictures Nehmen Sie Bilder Nehmen Sie Bilder Nehmen Sie Bilder Nehmen Sie Bilder 5 7 64 4 4 5 5 6 6 PocketWizard.com | 7 TTL flash on camera TTL-Blitz auf der Kamera TTL-Blitz auf der Kamera TTL-Blitz auf der Kamera TTL-Blitz auf der Kamera Non-TTL flash on camera] Nicht-TTL-Blitz auf der Kamera Nicht-TTL-Blitz auf der Kamera Nicht-TTL-Blitz auf der Kamera Nicht-TTL-Blitz auf der Kamera This radio does not perform remote TTL triggering. La radio ne fonctionne pas à distance le déclenchement TTL. La radio no funciona remoto TTL disparo. Das Radio führt keine entfernten TTL auslösen. La radio non esegue a distanza TTL trigger. TTL 8 | PocketWizard PlusX ON CAMERA FLASH | OpératiOn | OperaCión | BetrieB | OperaziOne )))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))) Remote shutter release Entfernten Kamera auslösen Entfernten Kamera auslösen Entfernten Kamera auslösen Entfernten Kamera auslösen Auto Relay Mode – Set remote flash one channel higher to sync with remote camera. Mode Relais Auto – Distance flash, réglez un canal supérieur, se synchronise avec l’appareil photo à distance. Modo Auto Relay – Flash remoto, establezca un canal más alto, se sincroniza con la cámara remota. Auto-Relay-Modus – Remote-Flash, stellen einen Kanal höher, synchronisiert mit Remote-Kamera. Modalità Auto Relay – A distanza il flash, impostare un canale più alto, si sincronizza con la macchina fotografica a distanza. Velcro ® PocketWizard.com | 9 REMOTE CAMERA | CaméRa à distanCe | CámaRa Remota | Remote-KameRa | fo…

Text truncated - open the document above for the full version.

Wind Direction: Sheet Size: Labels/Sheet SHEET ROLL Labels/Roll Core I.D. Backsplit THESE DRAWINGS AND SPECIFICATIONS ARE THE EXCLUSIVE PROPERTY OF TAPECON, INC., AND SHALL NOT BE USED FOR ANY PURPOSE EXCEPT THE MANUFACTURE OF GOODS FOR SAID COMPANY. MATERIAL #1: 2 Mil Matte Silver Polyester MATERIAL #2: - - ADHESIVE: Permanent LINER: 50# LAMINATE: 1 Mil Matte Compucal VARNISH: - - CUSTOMER: EPE Corporation DIE #: 13-M-0424 PART #: 12158REV: 1 CONSTRUCTION INFORMATIONFINISH INFORMATIONREVISION HISTORY FG#: 9131 CUSTOMER INFORMATION - 3.00” - 500 - 1INITIAL RELEASE12/27/12AB 2UPDATE MATERIAL1/2/13BE INT.DATEREVISION DESCRIPTION PROOF REV. BLUEPRINT SCALE: 100% This Proof has been checked by our proof reader. Errors not corrected will be the responsibility of the customer. Therefore be sure to read this proof carefully and check ALL appropriate boxes Please return Proof Approval within 24 hrs. to maintain the Ship Date IS Spelling/Grammar Correct? YES Are Graphics Correct? Are Materials Correct? Are Dimensions Correct? Approved Not Approved SIGNATURE: DATE: Is Tolerance Correct? Are Colors Correct? IS Finished Product Correct? NOYESNO PAGE: 1 of 1 Surface Print Side Sub-Surface DIE LINE DOES NOT PRINT Black UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES FINAL PART TOLERANCES ARE: 2 places +/- .020” 3 places +/- .010” Guillotine +/- .03125” CUT TO COPY TOLERANCES ARE: +/- .010” REFERENCE DIMENSIONS WILL BE PROCEEDED OR FOLLOWED BY (REF) THIS PROOF DOES NOT REPRESENT ACTUAL PMS COLORS, PLEASE REFER TO “THE PANTONE COLOR BRIDGE”. COLOR TOLERANCES BASED ON ∆Ε 2000 AND COLOR GAMUT REQUIREMENTS. Max Roll O.D. 701 Seneca Street • Suite 255 • Buffalo, NY 14210 • Tel. 716/854-1322 • 800/333-2407 • Fax: 716/854-1320 AR101 Rev C 2. FILE NAME: 12158_rev1.p.ai Model: PX-FCC FCC ID: KDS-PWX-100 IC: 2170A-PWX100 344.04 MHz Pat. www.pwpatents.com Made in USA S/N: 0.98425" (25mm) 0.031” - 0.062" (4X) 1.23425" (31.35mm) 0.050" +/-0.0156" 0.050" +/-0.0156" 0.210" 0.210"

Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Technical Information MANUFACTURER APPLICANT Name: Lab Partners Associates, Inc. Name: Lab Partners Associates, Inc. Address: 21 Gregory Drive, Suite 140 Address: 21 Gregory Drive, Suite 140 City, State, Zip: South Burlington, VT 05403 City, State, Zip: South Burlington, VT 05403 TEST SPECIFICATION: FCC Rules and Regulations Part 15, Subpart C, Section 15.231 Radio Standards Specification, RSS-210, Issue 8, December 2010 and RSS-GEN, Issue 3, December 2010 TEST PROCEDURE: ANSI C63.4:2003 Test Sample Description TEST SAMPLE: PocketWizard Plus X Transceiver BRANDNAME(s): PocketWizard MODEL: PX-FCC FCC ID: KDS-PWX-100 IC : 2170A-PWX100 TYPE: Wireless Flash Control Transceiver POWER REQUIREMENTS: 3VDC via 2 internal 1.5 VDC batteries FREQUENCY OF OPERATION: 344.04MHz SUPPORT EQUIPMENT: The PocketWizard Plus X Transceiver was tested while mounted via hot shoe connector on a Kodak Digital Camera, Model DCS Pro 14N, Serial Number: P14N-1217. PURPOSE: The purpose of this test program was to demonstrate compliance of the PocketWizard Plus X Transceiver to the requirements of FCC Part 15.231 and RSS-210, Annex 1. Page 2 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Tests Performed The test methods performed on the PocketWizard Plus X Transceiver are shown below: FCC Part 15, Subpart C Industry Canada RSS-210 Issue 8, December 2010 Industry Canada RSS-GEN Issue 3, December 2010 Test Method 15.231(b) A1.1.2(1) N/A Field Strength of Fundamental Emissions 15.231(b)(2) A1.1.2(2) 4.5 Duty Cycle Determination 15.231(b)(3) A1.1.2(3) N/A Field Strength of Spurious Emissions 15.231(c) A1.1.3 N/A Bandwidth of Emissions N/A N/A 4.10 Receiver Spurious Emissions General Test Requirements 1. The measurement procedures of ANSI C63.4:2003 were utilized as specified in FCC Part 15, Subpart C, Section 15.31(a)(3) and IC RSS-GEN Section 4.1. 2. All radiated emissions measurements were performed on an Open Area Test Site (OATS), listed with the FCC and IC, in accordance with FCC Section 15.31(d) and IC Section 4.2. 3. The level of the fundamental field strength was recorded with a new battery installed in the EUT, in accordance with FCC Section 15.231(e) and IC Section 4.3(e). 4. All measurements were performed at the specified 3 meter test distance as required by FCC Section 15.31(f) and IC Section 7.25. 5. The EUT was rotated throughout 360 degrees for all radiated emissions measurements as specified in FCC Section 15.31(f)(5) and IC Section 4.3(h). 6. All readily accessible EUT controls were adjusted in such a manner as to maximize the level of emissions in accordance with FCC Section 15.31(g) and IC Section 4.3(h). 7. Appropriate accessories were attached to all EUT ports during the performance of radiated emissions measurements as required by FCC Section 15.31(i) and IC Section 4.3(d). 8. All measurements were taken with a peak detector function as specified in FCC Section 15.35(a) and IC Section 4.4. The duty cycle, calculated in accordance with FCC Section 15.35(c) and IC Section 4.5, was applied to the peak readings in order to obtain the average value of emissions. The peak value of emissions was verified to meet the 20 dB requirement of FCC Section 15.35(b) and IC Section 7.2.1. Page 3 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Certification and Signatures We certify that this report is a true representation of the results obtained from the tests of the equipment stated. We further certify that the measurements shown in this report were made in accordance with the procedures indicated and vouch for the qualifications of all Retlif Testing Laboratories personnel taking them. Scott Wentworth Branch Manager NVLAP Approved Signatory Todd Hannemann Laboratory Supervisor iNARTE Certified Technician ATL-0255-T Non-Warranty Provision The testing services have been performed, findings obtained and reports prepared in accordance with generally accepted laboratory principles and practices. This warranty is in lieu of all others, either expressed or implied. Non-Endorsement This test report contains only findings and results arrived at after employing the specific test procedures and standards listed herein. It is not intended to constitute a recommendation, endorsement or certification of the product or material tested. This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Page 4 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Revision History Revisions to this document are listed below; the latest revised document supersedes all previous issues of this document. Revision Date Pages Affected - January 22, 2013 Original Release A February 8, 2013 Page 30 Page 5 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Requirements and Test Results Requirement: FCC Section 15.231(a) - Periodic operation in the band 40.66 - 40.7 MHz and above 70 MHz The provisions of this Section are restricted to periodic operation within the band 40.66-40.7 MHz and above 70 MHz. Except as shown in Paragraph (e) of this Section, the intentional radiator is restricted to the transmissions of a control signal such as those used with alarm systems, door openers, remote switches, etc. Continuous transmissions, voice, video and the radio control of toys are not permitted. Data is permitted to be sent with a control signal. IC RSS-210, A1.1 - Momentarily Operated Devices The frequency bands and field strength limits in Tables 4 and 5 are only for the transmission of a control signal such as that used with alarm systems, door openers, remote switches, etc. Radio control of toys o…

Text truncated - open the document above for the full version.

Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Test Configuration Page 26 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Horizontal Antenna Polarization, 30 to 1000 MHz Vertical Antenna Polarization, 30 to 1000 MHz Page 27 of 40 Retlif Testing Laboratories, Test Report R-5659N-1, Rev. A, LPA Design, Inc. FCC ID: KDS-PWX-100, IC: 2170A-PWX100 Horizontal Antenna Polarization, 1 to 4 GHz Vertical Antenna Polarization, 1 to 4 GHz Page 28 of 40