KPU41846Keyless Entry Transmitter

FCC ID: KPU41846 FCC ID: KPU41846

FCC ID: KPU41846 FCC ID: KPU41846

FCC ID: KPU41846

28.2 17.7 Visteon Model No.41846 Punch Marked Certification number FCC ID: KPU41846 CANADA: 4238A-41846 The above certification number and Model number will be marked on the part of TX bottom housing. FCC ID: KPU41846

FCC ID: KPU41846

PRODUCT SERVICE TEST RESULT SUMMARY FCC PART 15 Subpart C Section 15.231 MANUFACTURER'S NAME Visteon Asia Pacific, Inc. TYPE OF EQUIPMENT Keyless Entry Transmitter MODEL NUMBER 41846 MANUFACTURER'S ADDRESS Hiroshima Sangyo Bunka Center 9F 16-35 Hijiyama-honmachi, Minami-ku, Hiroshima 732-0816 Japan TEST REPORT NUMBER NC300141.1 TEST DATE 16 January & 03 February 2003 According to testing performed at TÜV Product Service Inc, the above-mentioned unit is in compliance with the electromagnetic compatibility requirements defined in FCC Part 15 Subpart C Section 15.231. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. TÜV Product Service Inc, as an independent testing laboratory, declares that the equipment tested as specified above conforms to the requirements of FCC Part 15 Subpart C Section 15.231. Date: 10 February 2003 Location: Taylors Falls MN G. S. Jakubowski J. T. Schneider USA Tested By Reviewed By Not Transferable File No. NC300141.1, Page 1 of 10 TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 PRODUCT SERVICE EMC EMISSION - T E S T R E P O R T Test Report File No. : NC300141.1 Date of issue: 10 February 2003 Model No. : 41846 Product Type : Keyless Entry Transmitter Applicant : Visteon Asia Pacific, Inc. Address : Hiroshima Sangyo Bunka Center 9F : 16-35 Hijiyama-honmachi, Minami-ku, Hiroshima 732-0816 Japan Manufacturer : Visteon Electronics Shanghai Plant Address : 300 Minolta Road : Songjiang country Shanghai, China 201600 Test Result : nn Positive oo Negative Test Project Number : Reference(s) NC300141.1 Total pages including Appendices 23 TÜV Product Service Inc is a subcontractor to TÜV Product Service, GmbH according to the principles outlined in ISO/IEC Guide 25 and EN 45001. TÜV Product Service Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. TÜV Product Service Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV Product Service Inc issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. This report shall not be used by the client to claim product endorsement by NVLAP or any agency of the US government. TÜV Product Service Inc and its professional staff hold government and professional organization certifications and are members of AAMI, ACIL, AEA, ANSI, IEEE, NVLAP, and VCCI File No. NC300141.1, Page 2 of 10 TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 PRODUCT SERVICE D I R E C T O R Y - EMISSIONS Page(s) A) Documentation Test report 1 - 10 Directory 2 Test Regulations 3 Environmental Conditions 4 EUT Information (Operating Modes, cables) 7 Deviation from standard / Summary 9 Test-setups (Photos) 10 Test-setup (drawing) Appendix A B) Test data results Conducted emissions 10/150 kHz - 30 MHz 5, 8 Radiated emissions electric field 30 MHz - 3200 MHz 6, 8 Radiated emissions magnetic field 60 Hz - 30 MHz N/A Interference power 30 MHz - 300 MHz N/A Emission Bandwidth 313.85 MHz 8 Duty Cycle 313.85 MHz 8 Signal Deactivation 313.85 MHz 8 C) Appendix A Test Data Sheets and Test Setup Drawing(s) A2 – A8 D) Appendix B Constructional Data Form and/or Product Information Form B2 – B3 E) Appendix C Measurement Protocol C1 - C2 File No. NC300141.1, Page 3 of 10 TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 PRODUCT SERVICE EMISSIONS TEST REGULATIONS : The emissions tests were performed according to following regulations: -------------------------------------------------------------------------------- o - EN 50081-1 / 1991 o - EN 55011 / 1991 o - Group 1 o - Group 2 o - Class A o - Class B o - EN 55013 / 1990 o - EN 55014 / 1987 o - Household appliances and similar o - Portable tools o - Semiconductor devices o - EN 55014 / A2:1990 o - EN 55014 / 1993 o - Household appliances and similar o - Portable tools o - Semiconductor devices o - EN 55015 / 1987 o - EN 55015 / A1:1990 o - EN 55015 / 1993 o - EN 55022 / 1987 o - Class A o - Class B o - EN 55022 / 1994 o - Class A o - Class B o - BS o - VCCI o - Class A o - Class B n - FCC Part 15 Subpart C Section 15.231 o - AS 3548 (1992) o - Class A o - Class B o - CISPR 11 (1990) o - Group 1 o - Group 2 o - Class A o - Class B o - CISPR 22 (1993) o - Class A o - Class B File No. NC300141.1, Page 4 of 10 TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 PRODUCT SERVICE Environmental conditions in the lab: Actual Temperature : 22 °C Relative Humidity : 25 % Atmospheric pressure : 98.3 kPa Power supply system : Battery Sign Explanations: o - not applicable n - applicable File No. NC300141.1, Page 5 of 10 TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0 PRODUCT SERVICE Emissions Test Conditions: CONDUCTED EMISSIONS (Interference Voltage) The CONDUCTED EMISSIONS (INTERFERENCE VOLTAGE) measurements were performed at the following test location: n - Test not applicable o - Wild River Lab Large Test Site (Open Area Test Site) o - Wild River Lab Small Test Site (Open Area Test Site) o - Oakwood Lab (Open Area Test Site) o - Wild River Lab Screen Room o -…

Text truncated - open the document above for the full version.

FCC ID: KPU41846 TEST SETUP FOR EMISSIONS TESTING WILD RIVER LAB Large Test Site Notes: 1.Items shown in dotted lines are located on the floor below the test area. It is 5 meters vertically from the ground floor to the test area. 2.50 Hz, 60 Hz, and 400 Hz are power panels for alternating current. 3.The antenna may be positioned horizontally 3, 10 or 30 meters from the center of the turntable. 4.The circle is a 6.7 meter diameter turntable. 5.A ground plane is in the plane of this sheet. 6.The test sample is shown in the azimuthal position representing zero degrees. EUT 0 90270 180 60 Hz 50 Hz 400 Hz Shielded Enclosure ANTENNA