KUTSM001Side Mount Garage Door Opener

Owner’s Manual OMS ™ Garage Door Opener Watch Quick Setup Videos at www.skylinkhome.com/videos or scan • Please read this manual and the enclosed safety materials carefully! • Safety Beam Sensor MUST BE INSTALLED and aligned properly. • Periodic checks of the openers are required to ensure safe operation. • Save this manual for future reference. • This Equipment meets or exceeds all Federal, State and UL325 Safety requirements. • For more information updates and useful links, please visit our website https://www.skylinkhome.com IMPORTANT: DO NOT RETURN TO THE STORE, CONTACT OUR CUSTOMER SERVICE 1-800-304-1187 M-F 9am-5pm Online Chat: www.skylinkhome.com [email protected] For residential use only 1 Introduction ...........................................................1 Pre-Installation Checklist .............................3 Parts And Accessories ....................................4 Important Instructions ...................................6 Assemble the SMO.............................................8 Attach the Coupler to the Garage Door Opener........8 Attach Mounting Bracket to Garage Door Opener..9 Installation...............................................................10 Position and Mount the Garage Door Opener.............10 Attach the Emergency Release Rope and Handle...12 Install Door Lock...............................................................................13 Attach the Cable Tensioner.......................................................14 Install the Battery Backup (Optional).................................15 Install the door control..................................................................16 Wire the door control to the garage door opener.....17 Install the Safety Beam Sensors.............................................18 Wire the Safety Beam Sensors................................................19 Connect Power...................................................................................20 Aligning the safety beam sensors.........................................21 Programming.........................................................22 Programming remote / keypad.............................................22 Programming the travel limits...............................................22 Vehicle Programming (in-Car Remote).............................23 Test safety reversal system........................................................24 Test safety beam sensors............................................................24 Operation..................................................................25 Manually Open / Close Garage Door Remote Control Keypad Deluxe Wall Console offers 4 functions Erase Remote Control / Keypad from Memory Maintenance...........................................................31 Wi-Fi Connectivity........................................32 Troubleshooting - Error Code...................33 Troubleshooting............................................34 Important Safety Instructions..................35 FCC.....................................................................36 ISED....................................................................37 Warranty..........................................................38 INTRODUCTION CONTENTS Important Safety Information Congratulations on your purchase of a Skylink Garage Door Opener. The documentation provided with your opener has been carefully designed and organized to make the assembly, operation, and continued maintenance of your product as easy and safe as possible. Make sure the garage door opener is installed, operated, maintained, and tested in strict accordance with the instructions and warnings contained in this ǼƇǾɍƇdzؘ٪§ƲƇƫ٪ƇǾƫ٪njȉdzdzȉɦ٪Ƈdzdz٪ǍɍǛƫƲdzǛǾƲȷ٪ƇǾƫ٪ȉȬƲȯƇɅǛǾǍ٪ǛǾȷɅȯɍƤɅǛȉǾȷ٪ƣƲnjȉȯƲ٪ɅǕƲ٪ ̊ȯȷɅ٪ɍȷƲ٪ȉnj٪ɅǕǛȷ٪ȬȯȉƫɍƤɅؘ٪ Store the manual in a safe, easily accessible location for future reference. This warning symbol is used to indicate possible mechanical or electrical hazards that may cause serious injury or death. This warning symbol is used to indicate the possibility of damage to the garage door or opener. WARNING CAUTION Safety Symbol Overview WARNING To prevent possible SEVERE INJURY OR DEATH: • DO NOT install opener on an unbalanced door. Call a trained garage door technician if garage door binds, sticks or is unbalanced. • Disable all locks and remove all ropes connected to the garage door before installing the garage door opener. • DO NOT connect the opener to any source of power until instructed to do so. • Door Control must be installed within sight of door, at a minimum height of 5ft and away from all moving parts of the door. • DO NOT try to remove, repair or adjust springs or anything to which door spring parts are f astened. • Repair and adjustments must be made by a trained garage door technician. • Turn off power before removing opener cover. • Opener must be properly grounded. • Auto-Close Timer and Orbit Home Smartphone app can only be used with sectional doors. * These features cannot be used with one-piece doors. 2 INTRODUCTION(continued) IMPORTANT INSTALLATION INSTRUCTIONS WARNING - To reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS. ؘ׀٪٪٪UǾȷɅƇdzdz٪ȉǾdzɬ٪ȉǾ٪Ƈ٪ȬȯȉȬƲȯdzɬ٪ȉȬƲȯƇɅǛǾǍ٪ƇǾƫ٪ƣƇdzƇǾƤƲƫ٪ǍƇȯƇǍƲ٪ƫȉȉȯؘ٪
Ǿ٪ǛǼȬȯȉȬƲȯdzɬ٪ƣƇdzƇǾƤƲƫ٪ƫȉȉȯ٪ǕƇȷ٪ɅǕƲ٪ȬȉɅƲǾɅǛƇdz٪Ʌȉ٪ǛǾ ̨ǛƤɅ٪ȷƲɥƲȯƲ٪ǛǾǬɍȯɬؘ٪ ٪٪٪٪٪٪OƇɥƲ٪Ƈ٪ȮɍƇdzǛ ̊Ʋƫ٪ȷƲȯɥǛƤƲ٪ȬƲȯȷȉǾ٪ǼƇǯƲ٪ȯƲȬƇǛȯȷ٪ȉȯ٪ƇƫǬɍȷɅǼƲǾɅȷ٪Ʌȉ٪ƤƇƣdzƲȷؙ٪ȷȬȯǛǾǍ٪ƇȷȷƲǼƣdzǛƲȷؙ٪ƇǾƫ٪ȉɅǕƲȯ٪ǕƇȯƫɦƇȯƲ٪ƣƲnjȉȯƲ٪ǛǾȷɅƇdzdzǛǾǍ٪ɅǕƲ٪ȉȬƲǾƲȯؘ 3. Remove or disable all pull ropes, and all locks connected to the garage door before installing the opener. ׂؘ٪٪٪ÝǕƲȯƲ٪ȬȉȷȷǛƣdzƲؙ٪ǛǾȷɅƇdzdz٪ɅǕƲ٪ƫȉȉȯ٪ȉȬƲȯƇɅȉȯ٪٪ֿׂؘ׀Ǽ٪ׅح٪njɅخ٪ȉȯ٪ǼȉȯƲ٪ƇƣȉɥƲ٪ɅǕƲ٪ ̨ȉȉȯؘ٪Fȉȯ٪ȬȯȉƫɍƤɅȷ٪ɦǛɅǕ٪ƇǾ٪ƲǼƲȯǍƲǾƤɬ٪ȯƲdzƲƇȷƲؙ٪ ٪٪٪٪٪٪ǼȉɍǾɅ٪ɅǕƲ٪ƲǼƲȯǍƲǾƤɬ٪ȯƲdzƲƇȷƲ٪ƇɅ٪dzƲƇȷɅ٪٪ׁ׆ֿؘǼ٪ׄح٪njɅخ٪ƇƣȉɥƲ٪ɅǕƲ٪ ̨ȉȉȯؙ٪ƇǾƫ٪ƇɥȉǛƫ٪ƤȉǾɅƇƤɅ٪ɦǛɅǕ٪ɥƲǕǛƤdzƲȷ٪Ʌȉ٪ȬȯƲɥƲǾɅ٪ƇƤƤǛƫƲǾɅƇdz٪ȯƲdzƲƇȷƲؘ 5. Do not connect the door opener to the source of power until instructed to do so. 6.…

Text truncated - open the document above for the full version.

18 INSTALLATION(continued) Step 8. Install the Safety Beam Sensors The safety beam sensors [J4] can be installed in 3 different ways: 1) Door Track Installation (Preferred and easiest) 2) Wall Installation 3) Floor Installation Door Track Installation: Slide the curved portion of the sensor bracket around the outside edge of the door track. Snap into place so the sensor bracket is against the track. Wall Installation: 1. Remove the curved portion from the sensor bracket. 2. Position the sensor bracket against the wall with the sensor facing the door. Make sure there is enough clearance for the beam to be unobstructed. Mark 2 mounting holes. 3. Drill 3/16 inch pilot holes for each sensor bracket and attach the sensor brackets to the wall using lag screws. Floor Installation: 1. Remove the curved portion from the sensor bracket. ؘ׀٪¤dzƇƤƲ٪ƣȉɅǕ٪ȷƲǾȷȉȯ٪ƣȯƇƤǯƲɅȷ٪ȉǾ٪ɅǕƲ٪ ̨ȉȉȯ٪njƇƤǛǾǍ٪ƲƇƤǕ٪ȉɅǕƲȯ٪ɦǛɅǕ٪ɅǕƲ٪ same distance from the wall without any obstruction. ׁؘ٪
ɅɅƇƤǕ٪ɅǕƲ٪ȷƲǾȷȉȯ٪ƣȯƇƤǯƲɅȷ٪Ʌȉ٪ɅǕƲ٪ ̨ȉȉȯ٪ɍȷǛǾǍ٪ƤȉǾƤȯƲɅƲ٪ anchors (not provided). Ensure both sensor brackets are the same ǕƲǛǍǕɅڑnjȯȉǼڑɅǕƲڑ˷ȉȉȯى NOTE. If additional clearance is needed, wooden blocks can be used. Make sure each bracket has the same amount of clearance so they align properly. NOTE. Front View Back View Ground 4”- 6” 1 2 Door Track Installation J4 Wall Installation Wooden Block (Optional) lag screws Not provided Floor Installation Wall / Floor Installation 2 1 3 19 INSTALLATION(continued) Step 9. Wire the Safety Beam Sensors 1. Run the wire from both sensors to the garage door opener. Attach the wire to the wall and ceiling with the wire clips. 2. Remove insulation from each set of wires. Separate the wires. Twist the two white non-marked wires together. Twist the two white marked wires together. 3. Connect 2 pairs of twisted wires to the safety beam sensor terminals on the garage door opener. To insert or remove the wires from the terminal, push in the tab with a screwdriver tip. Each pair of twisted wires can be connected to either terminal. To insert or release wire, push in the tab with a screwdriver tip (Black) Twist marked wires together Wire the Safety Beam Sensors (White) Twist non-marked wires together 20 INSTALLATION(continued) Step 10. Connect Power There are 2 options for connecting power: 1. AC Plug (Preferred & easiest) 1. Plug in the garage door opener into a grounded outlet. 2. Do not run garage door opener at this time. 2. Permanent Wiring by electrician 1. Cut existing power cord outside chassis. 2. The wire connections must be made inside the chassis and there must be at least 3”(7.5 cm) of new power supply line wire inside the chassis. Connect the conduit to the opener with the proper termination. Connect conduit wiring to opener wiring with wire nuts (not included). 3. The opener must be grounded. Plug garage door opener into a grounded outlet. If a grounded outlet is not available, ƤȉǾɅƇƤɅ٪Ƈ٪ȮɍƇdzǛ ̊Ʋƫ٪ƲdzƲƤɅȯǛƤǛƇǾ٪Ʌȉ٪ǛǾȷɅƇdzdz٪Ƈ٪ȬȯȉȬƲȯؘ DO NOT ACTIVATE THE OPENER UNTIL INSTRUCTED The position of the wire moving inside the body To prevent possible SERIOUS INJURY or DEATH. Disconnect power before removing cover for permanent wiring. Never use an extension cord, 2-wire adapter or change plug in any way. All wiring must be in compliance with all local electrical and building codes. WARNING WARNING Green - Ground White - Neutral Black - Hot Romove the bushing with pliers Open bushing OpenClose 3”(7.5 cm) Close bushing 90 ° 90 ° Not included 2 1 3 4 5 21 INSTALLATION(continued) Step 11. Aligning the safety beam sensors Safety beam sensors must be installed and aligned correctly for the garage door opener to operate properly. 1. Both safety sensors should be facing each other without any obstruction. 2. Check to make sure the LEDs in both sensors are glowing steadily. The LEDs in both sensors will glow steadily if they are aligned and wired correctly. Further alignment is necessary if any LEDs are not glowing steadily. If the Red LED is not glowing, please check the following: 1. Make sure the garage door opener is plugged into AC power. 2. Make sure the sensor wires are not shorted / broken. 3. Ensure the sensor has been wired correctly. White non-marked wires are twisted together and insert to one safety sensor terminal. White marked wires are twisted together and insert to another safety sensor terminal. If the Blue LED is not glowing, please check the following: 1. Make sure the sensors are aligned. Reposition the sensor bracket until the Blue LED is glowing steadily. 2. Make sure the sensor wires are not shorted / broken. Blue LED Transmitting Sensor Receiving Sensor Avoid direct sunlight Garage Door Safety Beam Sensor Red LED is the transmitting sensor, Blue LED is the receiving sensor. NOTE. 22 LED display LED/Down ButtonProgram ButtonWiFi/Up Button Step 1. Programming remote / keypad 1. Press and release the “ ” button, the LED display shows “ ”. 2. Press the button on the remote that you would like to program. For keypad, enter the [PIN] [#]. Refer to page 28 for more information. 3. Once the remote / keypad is programmed, the LED display will be off and you will hear one beep. Step 2. Programming the travel limits 1. Press and hold the “ ” button for 5 seconds until the LED display shows “ ”. 2. Press and hold the UP button until the door is in the desired fully open position. 3. Once the door is in the desired fully open position, press and release the “ ” button. The LED display will show “ ”. Each programming step has a 30-second time limit for completion after the function is initiated. Restart the step as many times as necessary to complete the programming. Each button on each remote must be programmed separately. NOTE. Do not release the “ ” button when you see “ ” on the LED display. NOTE. Use the DOWN button if the door opens too far. Press UP / DOWN button momentarily to adjust the open travel limit as necessary. NOTE. PROGRAMMING Incorrect adjustment of garage door travel limits will inter…

Text truncated - open the document above for the full version.

Rev 3/6/2023 Capital Prospect Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 17, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: KUTSM001 Capital Prospect Ltd (“the applicant”) certifies that, as of the date of the filing of the application, Secure Link Corporation is our designated U.S. agent for service of process for the above referenced FCC ID. Capital Prospect Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Secure Link Corporation accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Secure Link Corporation FRN: 0033900879 Address: 1180 E Francis Street, Suite D, Ontario, CA 91761, USA Contact Person: Philip Tsui Email: [email protected] Sincerely, Capital Prospect Ltd Secure Link Corporation Printed name: Joe Ng Agent printed name: Philip Tsui Signature: Agent Signature:

Rev 2/17/2023 Capital Prospect Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 13, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: KUTSM001 Capital Prospect Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Printed name: Joe Ng

Rev 2/17/2023 Capital Prospect Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 13, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: KUTSM001 Capital Prospect Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Printed name: Joe Ng

Rev 11/20/07 Capital Prospect Ltd Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: KUTSM001 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operational Description) (Block Diagram.pdf, Schematics.pdf, Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request that the information attached to this application be temporarily confidential for 180 days as outlined below: Exhibit Type File Name User Manual External Photos Internal Photos Test Setup Photos User Manual.pdf External Photos.pdf Internal Photos.pdf Test Setup Photos.pdf Sincerely, Signature: printed name: Joe Ng Date: June 13, 2023

Capital Prospect Ltd Federal Communications Commission Date: 2023-06-13 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC ID: KUTSM001 To Whom It May Concern: There is a certified 2.4G WIFI module in our product, FCC ID: 2ASEO-HM-WF8266A, grant date: 05/06/2019 If you have any questions regarding this application, please feel free to contact me. Sincerely, Signature:_________________________________ Company Name : Capital Prospect Ltd Name : Joe Ng Job Title : Project Manager E-mail : [email protected] Tel. : 852-2602-1318

/Users/wilson/Documents/CPL/SM-001/FCC POA Letter.docx Capital Prospect Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: June 13, 2023 SUBJECT: FCC Application for (FCC ID: KUTSM001) To Whom It May Concern: We, the undersigned, hereby authorize Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature: printed name: Joe Ng

Capital Prospect Ltd Federal Communications Commission Date: 2023-06-13 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC SDoC declaration for FCC ID: KUTSM001 To Whom it may concern, We, as the grantee of this project, would like to declare that this device has been tested according to the FCC requirement and found compliant with the following standards: FCC Part 15 Subpart B. Sincerely, Signature: ________________________________ Product Name : Side Mount Garage Door Opener Brand Name : SKYLINK Model Name : SM-001 Testing Lab : Centre Testing International Group Co., Ltd Company Name : Capital Prospect Ltd Name : Joe Ng Job Title : Project Manager E-mail : [email protected] Tel. : 852-2602-1318

ReportNo.:EED32P80550901Page27of53 APPENDIX2PHOTOGRAPHSOFEUT ViewofProduct-1 ViewofProduct-2 ReportNo.:EED32P80550901Page28of53 ViewofProduct-3 ViewofProduct-4 ReportNo.:EED32P80550901Page29of53 ViewofProduct-5 ViewofProduct-6 ReportNo.:EED32P80550901Page30of53 ViewofProduct-7 ViewofProduct-8 ReportNo.:EED32P80550901Page31of53 ViewofProduct-9 ViewofProduct-10 ReportNo.:EED32P80550901Page32of53 ViewofProduct-11 ViewofProduct-12

1:1 80 62 ETL Label GDO Main Unit Black SM-922BK MM Scale) 120 V AC, 60 Hz, 3.0 A For indoor use only This device complies with Par t 15 of the FCC Rules. Operation is subject t o the following conditions: (1) this device may not cause harmful inter fer ence; and (2) this device must accept any interfer ence received , including interfer ence that may cause undesired operation. RESIDENTIAL GARAGE DOOR OPENER Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux conditions suivantes : (1) cet appareil ne doit pas causer des interfér ences nuisibles, et (2) cet appareil doit accepter toute inter fér ence reçue, y compris les interfér ences qui peuvent perturber le f onctionnement. OUVRE-PORTE DE GARAGE RÉSIDENTIEL 120 V CA, 60 Hz, 3,0 A À utiliser uniquement en intérieur. CAN RSS-Gen/CNR-Gen R isque d'enfermement. Après avoir réglé la for ce ou les limites de déplacement, vérifiez que la porte remonte après contact avec une R isk of entrapment. After adjusting either the for ce of limits of travel adjustments, confirm that the door reverses on a 1 1/2”(3.8 cm) WARNING! ATTENTION! (or a 2 x 4 board laid flat ) high obstruction on the floor. obstruction de 1 1/2 po(3,8 cm) ou un 2 x 4 sur le sol. ATTENTION! L'ouvre-porte n'est pas équipé pour un câblage permanent. Pour installer une prise appropriée si une telle prise n'est pas disponible, contactez un électricien agréé. WARNING! The opener is not equipped for permanent wiring.To install a proper receptacle if one is not available, contact licensed electrician. CONFORMS TO ANSI/CAN/UL STD. 325 CERTIFIED TO CSA STD. C22.2 No .247 DISCONNECT POWER BEFORE SERVICING CONFORME À LA NORME ANSI/CAN/UL 325 CERTIFIÉ À LA NORME CSA C22.2 Nº 247 COUPEZ L'ALIMENTATION AVANT TOUT ENTRETIEN Made in Vietnam. Fabriqué au Vietnam. SKYLINK Model/Modèle/ Modelo : SM-001 FCC ID: KUTSM001 IC: 4454A-SM001 Contains FCC ID: 2ASEO-HM-WF8266A Contains IC: 24999-WF8266A Label location

ReportNo.:EED32P80550901Page33of53 ViewofProduct-13 ViewofProduct-14 ReportNo.:EED32P80550901Page34of53 ViewofProduct-15 ViewofProduct-16 ReportNo.:EED32P80550901Page35of53 ViewofProduct-17 ViewofProduct-18 ReportNo.:EED32P80550901Page36of53 ViewofProduct-19 ViewofProduct-20 ReportNo.:EED32P80550901Page37of53 ViewofProduct-21 ViewofProduct-22 ReportNo.:EED32P80550901Page38of53 ViewofProduct-23 ViewofProduct-24 ReportNo.:EED32P80550901Page39of53 ViewofProduct-25 ViewofProduct-26 ReportNo.:EED32P80550901Page40of53 ViewofProduct-27 ViewofProduct-28 ReportNo.:EED32P80550901Page41of53 ViewofProduct-29 ViewofProduct-30 ReportNo.:EED32P80550901Page42of53 ViewofProduct-31 ViewofProduct-32 ReportNo.:EED32P80550901Page43of53 ViewofProduct-33 ViewofProduct-34 ReportNo.:EED32P80550901Page44of53 ViewofProduct-35 ViewofProduct-36 ReportNo.:EED32P80550901Page45of53 ViewofProduct-37 ViewofProduct-38 ReportNo.:EED32P80550901Page46of53 ViewofProduct-39 ViewofProduct-40 ReportNo.:EED32P80550901Page47of53 ViewofProduct-41 ViewofProduct-42 ReportNo.:EED32P80550901Page48of53 ViewofProduct-43 ViewofProduct-44 ReportNo.:EED32P80550901Page49of53 ViewofProduct-45 ViewofProduct-46 ReportNo.:EED32P80550901Page50of53 ViewofProduct-47 ViewofProduct-48 ReportNo.:EED32P80550901Page51of53 ViewofProduct-49 ViewofProduct-50 ReportNo.:EED32P80550901Page52of53 ViewofProduct-51 ViewofProduct-52 ReportNo.:EED32P80550901Page53of53 ViewofProduct-53 Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp.Theresult(s)showninthis reportreferonlytothesample(s)tested.WithoutwrittenapprovalofCTI,thisreportcan’tbe reproducedexceptinfull. ***EndofReport***

ReportNo.: EED32P80550903 Page 1 of 7 1COVERPAGE RFExposureEvaluationReport Product:SideMountGarageDoorOpener Trademark:SKYLINK Model/Typereference:SM-001 SerialNumber:S/N ReportNumber: EED32P80550903 FCCID:KUTSM001 DateofIssue:Jun.19,2023 TestStandards: 47CFRPart1.1307 47CFRPart1.1310 447498D04InterimGeneralRF ExposureGuidancev01 Testresult:PASS Preparedfor: CapitalProspectLtd. Rm03,13/F,BlockB,VeristrongIndBdg, 34-36AuPuiWanStreet,FoTan,N.T.,HongKong Preparedby : CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby: Reviewedby: FrazerLiTomchen Approvedby: Date:Jun.19,2023 AaronMa CheckNo.::2658200423 ReportNo.: EED32P80550903 Page 2 of 7 2Version VersionNo.DateDescription 00Jun.19,2023Original ReportNo.: EED32P80550903 Page 3 of 7 3Contents Page 1COVERPAGE....................................................................................................................................................................1 2VERSION............................................................................................................................................................................2 3CONTENTS........................................................................................................................................................................3 4GENERALINFORMATION..............................................................................................................................................4 4.1C LIENT I NFORMATION ...................................................................................................................................................4 4.2G ENERAL D ESCRIPTIONOF EUT...................................................................................................................................4 4.3P RODUCT S PECIFICATIONSUBJECTIVETOTHISSTANDARD ...........................................................................................4 4.4T EST L OCATION .............................................................................................................................................................5 4.5D EVIATIONFROM S TANDARDS ......................................................................................................................................5 4.6A BNORMALITIESFROM S TANDARD C ONDITIONS ..........................................................................................................5 4.7O THER I NFORMATION R EQUESTEDBYTHE C USTOMER ................................................................................................5 5SAREVALUATION...........................................................................................................................................................6 5.1RFE XPOSURE C OMPLIANCE R EQUIREMENT .................................................................................................................6 5.1.1Limits....................................................................................................................................................................6 5.1.2TestProcedure....................................................................................................................................................6 5.1.3EUTRFExposureEvaluation..........................................................................................................................7 ReportNo.: EED32P80550903 Page 4 of 7 4GeneralInformation 4.1ClientInformation Applicant:CapitalProspectLtd. AddressofApplicant:Rm03,13/F,BlockB,VeristrongIndBdg, 34-36AuPuiWanStreet,FoTan,N.T.,HongKong Manufacturer:CapitalProspectLtd. AddressofManufacturer:Rm03,13/F,BlockB,VeristrongIndBdg, 34-36AuPuiWanStreet,FoTan,N.T.,HongKong 4.2GeneralDescriptionofEUT ProductName:SideMountGarageDoorOpener ModelNo.(EUT): SM-001 TradeMark: SKYLINK 4.3 ProductSpecificationsubjectivetothisstandard FrequencyRange:317.5MHz; 911MHz-919MHz; 2412MHz-2462MHz (Note:AcertifiedWiFimoduleisbuiltintotheproduct. FCCID:2ASEO-HM-WF8266A) TestPowerGrade:Default TestSoftwareofEUT:RFtest AntennaType:Internalantenna PowerSupply: AC120V SampleReceivedDate: Apr.21,2023 SampletestedDate: May.17,2023toJun.01,2023 Remark: CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwas/wereprovided bytheapplicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. ReportNo.: EED32P80550903 Page 5 of 7 4.4TestLocation Alltestswereperformedat: CentreTestingInternationalGroupCo.,Ltd BuildingC,HongweiIndustrialParkBlock70,Bao'anDistrict,Shenzhen,China Telephone:+86(0)75533683668Fax:+86(0)75533683385 Notestsweresub-contracted. FCCDesignationNo.:CN1164 4.5DeviationfromStandards None. 4.6AbnormalitiesfromStandardConditions None. 4.7OtherInformationRequestedbytheCustomer None. ReportNo.: EED32P80550903 Page 6 of 7 5SAREvaluation 5.1RFExposureComplianceRequirement 5.1.1Limits TheSAR-basedexemptionformulaof§1.1307(b)(3)(i)(B),repeatedhereasFormula(B.2),appliesfor singlefixed,mobile,andportableRFsourceswithavailablemaximumtime-averagedpoweroreffective radiatedpower(ERP),whicheverisgreater,oflessthanorequaltothethresholdPth(mW). Thismethodshallonlybeusedatseparationdistancesfrom0.5cmto40cmandatfrequenciesfrom 0.3GHzto6GHz(inclusive).PthisgivenbyFormula andfisinGHz,distheseparationdistance(cm),andERP20cmisperFormula(B.1). The1mWBlanketExemptionof§1.1307(b)(3)(i)(A)appliesforsinglefixed,mobile,andportableRF sourceswithavailablemaximumtime-averagedpowerofnomorethan1mW,regardlessofseparation distance. 5.1.2TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. ReportNo.: EED32P80550903 Page 7 of 7 5.1.3EUTRFExposureEvaluation For317.5MHz: ModeFieldstrengthofthe fundamentalsignal (dBuV/m@3m) ERP (dBm) ERP (mW) Limit (mW) MPE ratio Result 317.5MHz44.45-52.935.09*10^(-6)≤647.700.79*10^(-8)PASS For900MHz: ModeFieldstrength…

Text truncated - open the document above for the full version.

ReportNo.:EED32P80550902Page 1 of 38 TESTREPORT Product:SideMountGarageDoorOpener Trademark:SKYLINK Model/Typereference:SM-001 SerialNumber:S/N ReportNumber:EED32P80550902 FCCID:KUTSM001 DateofIssue:Jun.19,2023 TestStandards: 47CFRPart15SubpartC Testresult:PASS Preparedfor: CapitalProspectLtd. Rm03,13/F,BlockB,VeristrongIndBdg, 34-36AuPuiWanStreet,FoTan,N.T.,HongKong Preparedby: CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby: Reviewedby: FrazerLiTomchen Approvedby: Date:Jun.19,2023 AaronMa CheckNo.::2658200423 ReportNo.:EED32P80550902Page2of38 1Version VersionNo.DateDescription 00Jun.19,2023Original ReportNo.:EED32P80550902Page3of38 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15SubpartCSection 15.203 ANSIC63.10-2013PASS ACPowerLine ConductedEmission 47CFRPart15SubpartCSection 15.207 ANSIC63.10-2013PASS FieldStrengthofthe FundamentalSignal 47CFRPart15SubpartCSection 15.249(a) ANSIC63.10-2013PASS SpuriousEmissions 47CFRPart15SubpartCSection 15.249(a)/15.209 ANSIC63.10-2013PASS Restrictedbandsaround fundamentalfrequency (RadiatedEmission) 47CFRPart15SubpartCSection 15.249(a)/15.205 ANSIC63.10-2013PASS 20dBOccupied Bandwidth 47CFRPart15SubpartCSection 15.215(c) ANSIC63.10-2013PASS Remark: CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwereprovidedby theapplicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. ReportNo.:EED32P80550902Page4of38 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS..............…

Text truncated - open the document above for the full version.