LE2MP-7012Auto Pan Scan Platform

Auto Pan Scan Platform with Remote Control This manual contains important information about this product's operation. If you are installing this product for others, you must leave this manual -or a copy- with the end user. User Manual Model No.: MP-7012 PLEASE READ CAREFULLY AND SAVE Includes: - (1) Rotating Camera Platform - (1) Remote Control - (1) 9V AC/DC Adaptor - (1) Platform mounting bracket and hardware - (1) Extra Camera Mounting Plate Contents Safety and Hazard Notices Cable Connection Operating Procedures Panning Range Adjustment Technical Data Trouble Shooting Maintenance Major Operation Components Installation Camera Mounting Wall Mounting No.: MP-7012 - (1) Rotating Camera Platform - (1) Remote Control - (1) 9V AC/DC Adaptor - (1) Platform mounting bracket and hardware - (1) Extra Camera Mounting Plate Parts Included in This System 3. 4. 4. 5. 5. 6. 6. 8. 9. 10. 10. Important! Please read this Manual carefully before installing or using these units. WARNING- These units should ONLY be disassembled by an authorized technician if service is required. Safety Precautions For correct and safe operation of this system, it is essential that installers, end-users and service technicians should follow all safety procedures outlined in this manual. Specific Warning and Caution statements (and/or symbols) are marked on the units where needed. Warning and Caution Statements "WARNING" indicates a situation where failure to follow proper procedures can cause personal injury. "CAUTION" indicates a situation where failure to follow proper procedures can cause damage to the equipment. Important Safety Precautions Please read before installing & using this product Damages caused by non-compliance with this operating manual void the warranty! We will not assume any liability for damages to items or persons caused by improper handling or non-compliance with the safety notices! Any warranty claim will be null and void in such cases. - Make sure that all electric connections and connection cables between the devices of the camera system as well as the devices to be connected meet the pertaining regulations and are in conformity with the operating instructions. - In schools, training facilities, hobby and self-help workshops, qualified personnel needs to supervise the operation of electronic devices. - Also observe the safety notices and operating instructions of the other appliances connected to the system. - Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances. - Never plug-in or unplug the power supply with wet hands. - Never tug on the power cords, use the plug to unplug it from the socket. - Make sure that the power cables do not get crushed or damaged by sharp edges when installing the devices. - Never replace damaged power cables yourself! Take the device to a qualified repair technician. 10.3. Troubleshooting Other repairs as described above may only be performed by an authorized technician. ErrorPossible cause Observe the safety notices under all circumstances! Maintenance The devices are maintenance-free. Only clean the outside of the devices using a soft, dry cloth or a brush. Unplug prior to cleaning. Do not paint the camera or the receiver. Do not disassemble. Disassembly voids the warranty. Do not use any carboxylic cleaning agents or petrol, alcohol or similar which will destroy the surfaces of the devices. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning. Platform does not rotate at all Platform rotates, but not smooth • Check if power cable plug-in correctly • Check if controller battery low. Change battery (screw open the back cover then change a new 12V battery, Energizer A27 or Duracell MN27 is recommended) • The distance between platform and controller is too far. Stand closer to control the platform. • Weight overload. The platform is designed for smaller camera under 7.0lb. • Cable jammed. Stretch cable(s) attached to camera, allowing platform to rotate. • The distance between platform and controller is too far. Stand closer to control the platform. • Weight overload. The platform is designed for smaller camera under 7.0lb. • Cable jammed. Stretch cable(s) attached to camera, allowing platform to rotate. 1 2 3 5 6 7 8 2 4 1. Camera Mounting plate 2. Pan Limit Stops 3. DC In for Platform Adaptor 4. Mounting Bracket 5. Stop Button 6. Auto Pan Button 7. Pan Left Button 8. Pan Right Button Major Operating Components Installation Follow the instructions provided with mounting bracket. Mount and mounting surface must be able to support the weight of the pan/ tilt, camera and enclosure (if used). The camera/ enclosure must be properly mounted and balanced on the mounting bracket. CAUTION! STRONGLY NOT RECOMMEND TO MOUNT THE PLATFORM INVERTED!!! THE MAXIMUM LOAD FOR THE PLATFORM IS 6.6lb. THIS UNIT IS DESIGNED FOR EITHER UPRIGHT OR HORIZONTAL INSTALLATIONS.THE UNIT MUST BE INSTALLED IN A WEATHERPROOFENCLOSURE OR A PROTECTED AREA. 180 4.9. Rotating Camera Platform Technical Data Batt. Type 12V Alkaline Battery Transmitting Frequency 315 MHz Modulation Transmitting Range approx. 300ft at free visibility or 150ft indoor Remote Control Operating voltage Transmitting frequency Modulation Transmitting Range Operating temperature Maximum Load Pan Angle Pan Speed Weight (w/o bracket) Dimensions (w/o bracket) 9V/500mA 315MHz FM / ASK approx. 300ft at free visibility or 150ft indoor 14 o F to 122 o F 6.6lb 0 o to Panorama View 7 o per second 0.216lb 3.74 x 2.91 x 2.91 in FM / ASK Note: You can buy replacement battery from following brands and battery codes: CNB 27A, Duracell MN27, Energizer A27, Gold Peak GP27A, Golden Power A27, Motorola SNN4176A, RadioShack ALK27A, Varta V27GA, Vinnic L828 Mount the camera/ enclosure to the platform bracket as follows: screw 1. Camera Mounting screw Top View 8.5. Balance the camera/ enclosure and adjust the unit to align with mounting holes. Fasten wi…

Text truncated - open the document above for the full version.

Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Appendix G Pictures External Photos_Transmitter mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. External Photos_Receiver mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd.

Model No.: MP-7012 Made in China Model No.:MP-7012 This device complies with part 15 of the FCC rules Power supply: DC 9V , 500mA FCC ID : LE2MP-7012 Auto Pan Scan Platform

Made in China Model No.:MP-7012 This device complies with part 15 of the FCC rules Power supply: DC 9V , 500mA FCC ID : LE2MP-7012 Auto Pan Scan Platform

Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Internal Photos_Transmitter mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Internal Photos_Receiver mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd.

ETS Dr.Genz Taiwan PS Co., Ltd. FCC Registration No.: 930600 Industry Canada Field test laboratory Reg. No. IC 5679 A2LA Cert.No.: 2300.01 PTCRB Accredited Type Certification Test House TEST - REPORT FCC RULES PART 15 / SUBPART C FCC ID: LE2 MP-7012 Test report no.: W6M20702-7851-C-1 FCC ETS DR. GENZ TAIWAN PS CO., LTD 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU, TAIPEI 114, TAIWAN, R.O.C. PHONE 886-2-66068877 FAX 886-2-66068879 Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 1 of 22 TABLE OF CONTENTS 1 GENERAL INFORMATION 2 1.1 NOTES 2 1.2 TESTING LABORATORY 3 1.2.1 Location 3 1.2.2 Details of accreditation status 3 1.3 DETAILS OF APPROVAL HOLDER 3 1.4 APPILCATION DETAILS 4 1.5 TEST ITEM 4 1.6 TEST STANDARDS 4 2 TECHNICAL TEST 5 2.1 SUMMARY OF TEST RESULTS 5 2.2 TEST ENVIRONMENT 5 2.3 TEST EQUIPMENT UTILIZED 6 2.4 GENERAL TEST PROCEDURE 8 3 TEST RESULTS (ENCLOSURE) 9 3.1 TRANSMISSION REQUIREMENTS 10 3.1.1 Limit of Transmission Time 10 3.1.2 Active Time 10 3.2 OUTPUT POWER (FIELD STRENGTH) 11 3.3 OUT OF BAND RADIATED EMISSIONS 12 3.4 TRANSMITTER RADIATED EMISSIONS IN RESTRICTED BANDS 13 3.5 SPURIOUS EMISSION RADIATED, TRANSMITTER 14 3.6 SPURIOUS EMISSION RADIATED, RECEIVER 16 3.7 CHANNEL BANDWIDTH 17 3.8 ANTENNA REQUIREMENT 18 3.9 DUTY CYCLE 19 3.10 CONDUCTED MEASUREMENT AT (AC) POWER LINE 20 A PPENDIX 22 Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 2 of 22 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS DR. GENZ TAIWAN PS CO., LTD Tester: March 05, 2007 Jay Chaing Date ETS-Lab. Name Signature Technical responsibility for area of testing: March 05, 2007 Steven Chuang Date ETS Name Signature Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 3 of 22 1.2 Testing laboratory 1.2.1 Location OATS No.5-1, Shuang Sing Village, LiShuei Rd., Wanli Township, Taipei County 207, Taiwan (R.O.C.) Company ETS DR. GENZ TAIWAN PS CO., LTD. 6F, NO. 58, LANE 188, RUEY-KUANG RD. NEIHU, TAIPEI 114, TAIWAN R.O.C. Tel : 886-2-66068877 Fax : 886-2-66068879 1.2.2 Details of accreditation status Accredited testing laboratory A2LA-registration number: 2300.01 FCC filed test laboratory Reg. No. 930600 Industry Canada filed test laboratory Reg. No. IC 5679 PTCRB Accredited Type Certification Test House Town: ./. Country: ./. Telephone: ./. Fax: ./. 1.3 Details of approval holder Name : JSW PACIFIC CORPORATION Street : 3F-3, No.700, Chung-Zheng Rd., Chung Ho City, Town : Taipei Hsien, Country : Taiwan, R.O.C. Telephone : +886-2-8227-8582 Fax : +886-2-8227-8583 Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 4 of 22 1.4 Application details Date of receipt of application : February 12, 2007 Date of receipt of test item : February 13, 2007 Date of test : from February 14, 2007 to March 03, 2007 1.5 Test item Description of test item : Auto Pan Scan Platform Type identification : MP-7012 Brand name : ./. Serial number : Test sample without serial number Transmitting frequency : 315 MHz Operation mode : simplex Voltage supply Transmitter : 12 VDC (Battery) Input : 120VAC 60Hz 5.5W Voltage supply Receiver Output : 9V 500mA (If the device is using battery, please check if the device is tested under fresh battery condition.) Highest clock frequency : 315 MHz Antenna type : fix antenna Photos : see Appendix. Manufacturer (if applicable) Name : ./. Street : ./. Town : ./. Country : ./. Additional information : ./. 1.6 Test standards Technical standard: FCC RULES PART 15 SUBPART B / § 15.231 (a): August, 2006 Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 5 of 22 2 Technical test 2.1 Summary of test results No deviations from the technical specification(s) were ascertained in the course : of the tests performed. or The deviations as specified in 3 were ascertained in the course of the tests … performed. 2.2 Test environment Temperature : 23 o C Relative humidity content : 20 ... 75 % Air pressure : 86 ... 103 kPa Details of power supply Transmitter: 12 VDC ( Battery ) Input : 120VAC 60Hz 5.5W Details of power supply Receiver Output : 9V 500mA Comment: The testing items of this test report are all according to customer’s request. Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Page 6 of 22 2.3 Test equipment utilized No. Test equipment Type Serial No. Manufacturer Cal. Date Next Cal. Date ETSTW-CE 001 EMI TEST RECEIVER ESHS10 842121/013 R&S 2006/10/16 2007/10/15 ETSTW-CE 002 PREREULATOR MODE DC POWER SUPPLY None None Function Test ETSTW-CE 003 AC POWER SOURCE APS-9102 D161137 GW Function Test ETSTW-CE 004 ZWEILEITER-V- NETZNACHBILDUNG TWO- LINE V-NETWORK ESH3-Z5 840731/011 R&S 2006/10/16 2007/10/15 ETSTW-CE 005 Line-Impedance Stabilisation Network NNBM 8126D 137 Schwarzbeck 2006/10/16 2007/10/15 ETSTW-CE 006 IMPULS-BEGRENZER PULSE LIMITER ESH3-Z2 100226 R&S In House Certifica…

Text truncated - open the document above for the full version.

Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Set Up Photos_Transmitter mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd. Set Up Photos_Receiver mode Registration number: W6M20702-7851-C-1 FCC ID: LE2MP-7012 ETS Dr. Genz Taiwan PS Co., Ltd.