LJPNPM-2NXDual band, quadri mode cellular telephone

Phone notes My [Model] informationInformation source My numberWireless provider Phone serial number (ESN) On back of your phone, beneath the battery IMEI Voicemail numberWireless provider Wireless provider customer care Wireless provider Message center numberWireless provider Default recipient number (also known as the e-mail gateway) Wireless provider The wireless phone described in this guide is approved for use in GSM, TDMA, and AMPS networks. LEGAL INFORMATION Part No. _________, Issue No. ___ ©2001 Nokia Mobile Phones. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Printed in Canada __/2001 Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2001. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone [Model]. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. Radio frequency (RF) signals THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. You wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency brands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 1.17 W/kg, and when worn on the body, as described in this user guide, is 0.90 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted and Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJP NPM-2NX. For body-worn operation, to maintain compliance with FCC RF exposure guidelines, use only Nokia-approved accessories. When carrying the phone while it is on, place the phone in the specific carrying case that has been tested for compliance. Use of non-Nokia-approved accessories may violate FCC RF exposure guidelines and should be avoided. *In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at http://www.nokia.com. i Contents 1 Safety first . . . . . . . . . . . 1 Safety guidelines . . . . . . . . . 1 Quick guide to functions . . 3 Menu shortcuts . . . . . . . . . . 4 2 Welcome to Nokia . . . . . . 5 Get the most out of this guide . . . . . . . . . 5 Sign up with a wireless provider . . . . . . . 6 Before you contact Nokia . . . . . . . . . . . 6 About the antenna . . . . . . . 7 3 Review the basics . . . . . . 8 An illustrated view of the [Model] . . . . . . 8 Remove the back cover . . . . 9 Install the SIM card . . . . . . 9 Install the battery . . . . . . . . 9 Charge the battery . . . . . . 10 Remove the battery . . . . . 11 Important battery information . . . . . 12 Switch on the phone . . . . 1…

Text truncated - open the document above for the full version.

18 [ 128 ] Certification Information THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 1.17 W/kg, and when worn on the body, as described in this user guide, is 0.90 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) [ 129 ] Reference information 18 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJP NPM-2NX . For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the Nokia accessories supplied or designated for this product. When carrying the phone while it is on, place the phone in the specific carrying case that has been tested for compliance. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. *In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at http://www.nokia.com .

NOKIA CORPORATION Nokia Mobile Phones Elektroniikkatie 10 FIN-90570 OULU FINLAND Tel. +358 7180 08000 Fax. +358 7180 47222 November 30, 2001 Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch ESN/IMEI PROTECTION OF FCC ID: LJPNPM-2NX PER 47 CFR 22.919 The Electronic Serial Number and International Mobile Equipment Identity (later ESN/IMEI) are unique for each transceiver. The ESN/IMEI host components are permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit’s operating software is not alterable. ESN/IMEI are isolated from fraudulent contact and tampering. The host component does not contain other information, it is not removable and its electrical connections are not accessible. The host component does contain other information, and the ESN/IMEI information is encoded using: (1) Multiplication or division by a polynomial. (2) Cyclic coding. (3) The spreading of ESN/IMEI bits over various non-sequential memory locations. ESN/IMEI are factory set and are not alterable, transferable, removable, or otherwise able to be manipulated. Cellular mobile equipment is designed such that any attempt to remove, tamper with, or change the ESN/IMEI chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. NOKIA CORPORATION Petri Novamo Product Program Manager Nokia Mobile Phones, PC Site Oulu NOKIA CORPORATION Nokia Mobile Phones Elektroniikkatie 10 FIN-90570 OULU FINLAND Tel. +358 7180 08000 Fax. +358 7180 47222 November 30, 2001 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch We hereby certify that the transceiver FCC ID: LJPNPM-2NX complies with OET Bulletin No. 53 as referenced in Section 22.915 of the Commission’s rules, ETSI GSM 1900 specification and EIA/TIA/IS-54-B and TIA/EIA-136 Mobile Station – Land Station Compatibility Standards. Compliance was determined by testing appropriate parameters according to standards. Extensive field testing has been performed in several locations in the USA to verify the compatibility against different systems. NOKIA CORPORATION Petri Novamo Product Program Manager Nokia Mobile Phones, PC Site Oulu NOKIA CORPORATION Nokia Mobile Phones Elektroniikkatie 10 FIN-90570 OULU FINLAND Tel. +358 7180 08000 Fax. +358 7180 47222 November 30, 2001 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road Columbia, MD. 21046 Attention: Equipment Authorization Branch We hereby certify that the transceiver FCC ID: LJPNPM-2NX fully complies with 47CFR22.921. Nokia has received approval for its alternate 911 call completion method (DA 00-132 released January 28, 2000) and has incorporated the required modifications. NOKIA CORPORATION Petri Novamo Product Program Manager Nokia Mobile Phones, PC Site Oulu

November 30, 2001 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch REQUEST FOR CONFIDENTIALITY Pursuant to Sections 0.457 (d) (l) (ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of some of the information accompanying this Application of FCC ID: LJPNPM-2NX and as outlined below: - Exhibit 4: Block Diagram - Exhibit 5: Schematic Diagrams - Exhibit 10: List of Active Devices and Tune-Up Procedure - Exhibit 12: Theory of Operation / Description of Circuitry These materials contain trade secrets and proprietary information not customarily released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457 (d) (l) (ii) disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. For and Behalf of: NOKIA CORPORATION Petri Novamo Product Program Manager Nokia Mobile Phones, PC Site Oulu

NOKIA CORPORATION Nokia Mobile Phones Elektroniikkatie 10 FIN-90570 OULU FINLAND Tel. +358 7180 08000 Fax. +358 7180 47222 November 21, 2001 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch This letter will authorize the appointment of MORTON FLOM, P. Eng., and/or M. FLOM ASSOCIATES, INC. to act as our Agent in all FCC matters. This appointment is effective until otherwise notified by us. This is to advice that we are in full compliance with the Anti-Drug Abuse Act. The Applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, NOKIA CORPORATION Markku Myrskog Director Nokia Mobile Phones, PC Site Oulu

January 9, 2002 Applicant: Nokia Corporation FCC ID: LJPNPM-2NX EA368956 Subject: Form 731 Please note, this letter gives authorization to change the Rated RF Power Outputfrom 0.924 W to 1.077 Won the Form 731. Also uploaded in the Test Report Exhibit, you will find Amended page 2 of the Test Report showing the correct Power Output reading of 0.177 Watts. Sincerely yours, Morton Flom, P. Eng.

28 Nov 2001 Exhibit 3: External Photographs FCC ID: LJPNPM-2NX Applicant: Nokia Corporation Copyright © 2001 Nokia Corporation 28 Nov 2001 Exhibit 3: External Photographs FCC ID: LJPNPM-2NX Applicant: Nokia Corporation Copyright © 2001 Nokia Corporation

Code: 0500000MYDDFL Type: Model: NPM-2NX MADE IN MEXICO/ HECHO EN MEXICO IMEI: XXXXXX/XX/XXXXXX/X ESN: YYYYYYYYYYY FCC ID: LJPNPM-2NX CAN: FCC ID: LJPNPM-2NX Copyright2001 Nokia Corporation Exhibit 1: Type Label Position Applicant: Nokia Corporation 21 Dec 2001 Code: 0500000MYDDFL Type: Model: NPM-2NX MADE IN MEXICO/ HECHO EN MEXICO IMEI: XXXXXX/XX/XXXXXX/X ESN: YYYYYYYYYYY FCC ID: LJPNPM-2NX CAN: Code: 0500000MYDDFL Type: Model: NPM-2NX MADE IN MEXICO/ HECHO EN MEXICO IMEI: XXXXXX/XX/XXXXXX/X ESN: YYYYYYYYYYY FCC ID: LJPNPM-2NX CAN: FCC ID: LJPNPM-2NX Copyright2001 Nokia Corporation Exhibit 1: Type Label Applicant: Nokia Corporation 21 Dec 2001 NOKIA CORPORATION Nokia Mobile Phones Elektroniikkatie 10 FIN-90570 OULU FINLAND Tel. +358 7180 08000 Fax. +358 7180 47222 November 30, 2001 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch COMPLIANCE STATEMENT OF LJPNPM-2NX The compliance statement can be seen in User Guide of LJPNPM-2NX because the size of the handportable LJPNPM-2NX and its identification label are so small that the compliance statement cannot be printed visible enough. NOKIA CORPORATION Petri Novamo Product Program Manager Nokia Mobile Phones, PC Site Oulu The wireless phone described in this guide is approved for use in GSM, TDMA, and AMPS networks. LEGAL INFORMATION Part No. _________, Issue No. ___ ©2001 Nokia Mobile Phones. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Printed in Canada __/2001 Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2001. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. The information contained in this user guide was written for Nokia phone 6340. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

28 Nov 2001 Exhibit 9: Internal Photographs FCC ID: LJPNPM-2NX Applicant: Nokia Corporation Copyright © 2001 Nokia Corporation

2 Mar 2002 Exhibit 9: Additional Internal Photographs FCC ID: LJPNPM-2NX Applicant: Nokia Corporation Copyright © 2002 Nokia Corporation Internal antenna 2 Mar 2002 Exhibit 9: Additional Internal Photographs FCC ID: LJPNPM-2NX Applicant: Nokia Corporation Copyright © 2002 Nokia Corporation

PC Site Oulu Exhibit 11: SAR Report DTX04003-EN Applicant: Nokia Corporation FCC ID: LJPNPM-2NX Copyright  2002 Nokia Corporation 1 (15) SAR Compliance Test Report Test report no.: Not numbered Date of report: 2002-02-20 Number of pages: Contact person: Olli Kautio Responsible test engineer: Pertti Mäkikyrö Testing laboratory: Nokia Corporation Elektroniikkatie 10 P.O. Box 50 FIN-90571 OULU Finland Tel. +358-7180-08000 Fax +358-7180-47222 Client: Nokia Corporation Elektroniikkatie 10 P.O. Box 50 FIN-90571 OULU Finland Tel.+358-7180-08000 Fax 358-7180-47222 Tested devices: LJPNPM-2NX CSL-17, CSL-27, BCH-13, BCH-12P Supplement reports: - Testing has been carried out in accordance with: IEEE P1528-200X Draft 6.4 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques Documentation: The documentation of the testing performed on the tested devices is archived for 15 years at PC Site Oulu Test results: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Date and signatures: 2002-02-20 For the contents: Pertti Mäkikyrö Engineering Manager, EMC Miia Nurkkala Test Engineer PC Site Oulu Exhibit 11: SAR Report DTX04003-EN Applicant: Nokia Corporation FCC ID: LJPNPM-2NX Copyright  2002 Nokia Corporation 2 (15) CONTENTS 1. SUMMARY FOR SAR TEST REPORT............................................................................................................................. 3 1.1 MAXIMUM RESULTS FOUND DURING SAR EVALUATION.............................................................................................................3 1.1.1 Head Configuration ..........................................................................................................................................................3 1.1.2 Body Worn Configuration ...............................................................................................................................................3 1.1.3 Measurement Uncertainty..............................................................................................................................................3 2. DESCRIPTION OF TESTED DEVICE................................................................................................................................ 4 2.1 PICTURE OF PHONE AND LOCATION OF ANTENNA........................................................................................................................4 2.2 DESCRIPTION OF THE ANTENNA....................................................................................................................................................4 2.3 BATTERY OPTIONS........................................................................................................................................................................4 2.4 BODY WORN ACCESSORIES.........................................................................................................................................................5 3. TEST CONDITIONS............................................................................................................................................................ 6 3.1 AMBIENT CONDITIONS.................................................................................................................................................................6 3.2 RF CHARACTERISTICS OF THE TEST SITE........................................................................................................................................6 3.3 TEST SIGNAL, FREQUENCIES, AND OUTPUT POWER.....................................................................................................................6 4. DESCRIPTION OF THE TEST EQUIPMENT................................................................................................................... 6 4.1 SYSTEM ACCURACY VERIFICATION...............................................................................................................................................7 4.2 TISSUE SIMULANTS.......................................................................................................................................................................8 4.2.1 Head Tissue Simulant.......................................................................................................................................................8 4.2.2 Muscle Tissue Simulant ...................................................................................................................................................8 4.3 PHANTOMS...................................................................................................................................................................................9 4.4 ISOTROPIC E-FIELD PROBE ET3DV6 ........................................................................................................................................ 10 5. DESCRIPTION OF THE TEST PROCEDURE ................................................................................................................ 10 5.1 TEST POSITIONS......................................................................................................................................................................... 10 5.1.1 Against Phantom Head ................................................................................................................................................. 10 5.1.2 Body Worn Configuration ............................................................................................................................................ 12 5.2 SCAN PROCEDURES........................................................…

Text truncated - open the document above for the full version.

FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 Date of Report: Date of Submission: December 12, 2002 January 8, 2002 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Nokia Corporation Equipment: NPM-2NX FCC ID: LJPNPM-2NX FCC Rules: 24, 22H, 24E, Confidentiality Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. Filing fees are attached. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, Morton Flom, P. Eng. enclosure(s) cc: Applicant MF/cvr FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 LIST OF EXHIBITS (FCCCERTIFICATION(CELLULAR TRANSMITTERS) - REVISED 9/28/98) APPLICANT: Nokia Corporation FCC ID: LJPNPM-2NX BY APPLICANT: 1. LETTER OF AUTHORIZATION x 2. IDENTIFICATION DRAWINGS, 2.1033(c)(11) xLABEL xLOCATION OF LABEL xCOMPLIANCE STATEMENT xLOCATION OF COMPLIANCE STATEMENT 3. PHOTOGRAPHS, 2.1033(c)(12) x 4. CONFIDENTIALITY REQUEST: 0.457 and 0.459 x 5. DOCUMENTATION: 2.1033(c) (3) USER MANUAL x (9) TUNE UP INFO x (10) SCHEMATIC DIAGRAM x (10) CIRCUIT DESCRIPTION x BLOCK DIAGRAM x PARTS LIST x ACTIVE DEVICES x 6. ATTESTATION: GSM: Section 22.915 x 7. ATTESTATION: ESN: Section 22.919 x 8. ATTESTATION: 911: Section 22.921 x 9. SAR Report by Nokia (Finland) x BY M.F.A. INC. A. TESTIMONIAL & STATEMENT OF CERTIFICATION B. STATEMENT OF QUALIFICATIONS FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 TRANSMITTER CERTIFICATION of FCC ID: LJPNPM-2NX MODEL: NPM-2NX Serial Numbers of units tested: 235/13975557 and 235/13975555 to FEDERAL COMMUNICATIONS COMMISSION Rule Part(s) 24, 22H, 24E, Confidentiality DATE OF REPORT: December 18, 2001 ON THE BEHALF OF THE APPLICANT: Nokia Corporation AT THE REQUEST OF: P.O. Kare Oksanen 12/03/2001 Nokia Corporation Elektroniikkatie 10 Fin-90570 Oulu, Finland Attention of: Olli Kautio, Senior Engineering Manager, Testing & Type Approvals [email protected] and/or Kare Oksanen, R&D Type Approvals [email protected] 011 358 7180 08000; FAX: 011 358 7180 47222 SUPERVISED BY: Morton Flom, P. Eng. FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 THE APPLICANT HAS BEEN CAUTIONED AS TO THE FOLLOWING: 15.21 INFORMATION TO USER. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) SPECIAL ACCESSORIES. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 TABLE OF CONTENTS RULE DESCRIPTION PAGE . Test Report 1 2.1033(c) General Information Required 2 2.1033(c)(14) Rule Summary 5 . General Information 6 . Standard Test Conditions and Engineering Practices 7 2.1046(a) Carrier Output Power (Conducted) 8 2.1046(a). Carrier Output Power (Radiated) 10 2.1047(a) Audio Frequency Response 12 2.1047(a) Audio Low Pass Filter (Voice Input) 14 2.1047(b) Modulation Limiting 17 . Measurement Of Maximum Deviation 20 2.1049(c)(1), 22 Emission Masks (Occupied Bandwidth) 23 2.1051, 2.1049(c), 24, 24.238(b). . Transmitter Conducted Measurements 41 22.917 Emission Requirements - . Worst Case Modulation & Wideband Data 51 2.1051, 22.917 Spurious Emissions at Antenna Terminals 62 2.1053(a) Field Strength of Spurious Radiation 71 2.1055(a)(1) Frequency Stability (Temperature Variation) 75 2.1055(b)(1) Frequency Stability (Voltage Variation) 78 2.202(g) Necessary Bandwidth and Emission Bandwidth 79 FCC ID: LJPNPM-2NX MFA p01c0001, d01c0038 PAGE NO.1of79. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) TEST REPORT b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d01c0038 d) Client: Nokia Corporation Elektroniikkatie 10 Fin-90570 Oulu, Finland e) Identification: NPM-2NX FCC ID: LJPNPM-2NX Description: Dual Band, Quadri Mode Cellular Telephone f) EUT Condition: Not required unless specified in individual tests. g) Report Date: D…

Text truncated - open the document above for the full version.