M3N-WXMXSKINFCA WL/WS PASE System MY 2021

USER MANUAL OF THE CONTINENTAL FCA WL/WS PASE SYSTEM MY2021 MODEL: WXMXSKIN FCA WL/WS PASE System MY 2021 1 Muma, Charles General description WL/WS PASE system has the features described below: Remote Control Keyless Ignition Ignition Working condition Tire Pressure Monitoring System 2021 S-KIN The model WXMXSKIN is part of the FCA WL and WD PASE System that provides the capability for the driver to operate certain features of the vehicle via small, personally – carried customer Identification device or key (KeyFOB). The PASE System consist of an RF receiver (RFHM), a KeyFOB and Short Keyless Ignition Node (S-KIN). The S-KIN module, which provides the immobilizer functionality when the KeyFOB is in failure battery condition, also provide the ignition start signal to the RF Hub module when the IGN switch is activated. Functions The S-KIN module provides the following functions: 1. Provide the immobilizer functionality when the KeyFOB is in failure battery condition. 2. Provide the ignition start signal to the RF Hub module when the IGN switch is activated via the KIN line and hard wire. 3. 3. Display the ignition status to the customer via LEDs which illuminate the OFF, RUN, and ACC (optional) indicators in a status ring around the central Start/Stop button which is also illuminated, there is only one PCB variant and four mechanical variants. Pin Description FCA WL/WS PASE System MY 2021 2 Muma, Charles Block Diagram LF Immobilizer MCU SBC 5V Regulator and LIN VCC ACC LED VCC RUN LED VCC START/STOP VCC OFF LED VBP Pin 5 KLINE TXDRXD VBP Pin 6 VBATT Pin 4 Switch Output *Diag VBP WL / WD SHORT KIN Pin3 GND *Output diag VBP *Diag VCC VCC *Diag = Digital input interruption and analog measurement protected *Output Diag = Analog measurement and Digital input interruption protected Current limitation STATUS RING VCC (WD Only) PIN# Color Signal Description Voltage (V) Current (A) Comments 1 Spare (Not populated) - - 2 Spare (Not populated) - - 3 GND Generic - 200 mA GND 4 IGN/RUN Switch Output 6V – 16V 10 mA HSD Output 5 KIN_LINE 6V – 16V 20 mA LIN communication 6 PWR – Generic Battery 6V – 16V 200 mA Battery FCA WL/WS PASE System MY 2021 3 Muma, Charles Variants 3D Models WL SKIN – Black WL SKIN – Red WD SKIN BLACK WD SKIN RED FCA WL/WS PASE System MY 2021 4 Muma, Charles Components on board Microcontroller using internal clock 16 MHz ABIC2 IC for LF transmission 125 kHz Crystal oscillator for IBIC2 16 MHz LF Coil Antenna 125 kHz Technical data Operation Voltage 9V to 16V, connected to vehicle battery Input current during normal operation Up to 25 mA with LF transmission Up to 150 mA with LF transmission LIN Baud rate (KIN_LINE) 19.2 kbps Standby current consumption 150 uA Weight (g) 33 g Dimensions (mm) 48mm x 48mm x36 mm Operating temperature (°C) -40°C to +85°C RF Data Frequency 125 kHz Modulation ASK Antenna gain 0.5 dB Antenna type Coil Bandwidth 8 kHz Number of channels 1 channel FCA WL/WS PASE System MY 2021 5 Muma, Charles FCC OM INFO: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED OM INFO: Canada, Innovation, Science and Economic Development Canada (ISED) Notices This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis du Canada, Innovation, Sciences et Développement économique Canada (ISED) L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

ntinental$ Federal Communications Commission Authorization and Evaluation Division January 75,2020 ATTESTATION FCC ID: M3N-WXMXSKIN Product: FCA WL/WS PASE System MY 2021 Model: WXMXSKIN We don't provide any controls or software to allow operation outside the USA frequency band when we sell a product bearing the FCC ID: M3N-WXMXSKIN anywhere in the world. Sincerely, Charles Muma Continental Automotive Systems US Inc

ntinentalA FCC ID.:M3N-WXMXSKIN Date: January 15,2020 Federal Communications Commission Authorization and Evaluation Division Confi dentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested X Permanent ! Short Term n ShortTerm X Permanent n Permansnt n Permanent X Permanent n Short Term n ShortTerm Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos User's Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain hade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Charles Muma Continental Automotive Systems US Inc.

o ntinentalS Declaration of Authorization We Name: Address City: Country: Declare that: Name Representative of agent: Agent Company name: Address: City: Country: Continental Automotive Systems US lnc 46S5lnvestment Drive Troy Michigan United States is authorized to apply for Certification of the following product(s) Product Name: FCAWUWS PASE System MY 2021 Model: VI/XMXSKIN FCG lD: M3N-VVXMXSKIN lC lD:7812A-V\XMXSKIN Trademark: Continental on our behalf. This is valid until January 15,2021, or until FCC and lC certification are completed, whichever comes sooner. Vincent Lin DEKRA Testing and Certification Co., Ltd No.5-22, Ruishukeng, Linkou Dist., New Taipei Cily 24451, Taiwan, R.O.C. Date: City: Name: Function: Signature January 15,2020 Troy Charles Muma ologation

Report No.: 19C0371R-RFUSP20V00 Page : 1 of 10 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 2 of 10 (3) EUT Photo (4) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 3 of 10 (5) EUT Photo (6) EUT Photo

Continental Automotive GmbH FCC ID.: M3N-WXMXSKIN Siemensstrasse 12, 93055 Regensburg, Germany Tel : +1 248 764 6783 FCC ID Label

Continental Automotive GmbH FCC ID.: M3N-WXMXSKIN Siemensstrasse 12, 93055 Regensburg, Germany Tel : +1 248 764 6783 The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below.

Report No.: 19C0371R-RFUSP20V00 Page : 4 of 10 (7) EUT Photo (8) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 5 of 10 (9) EUT Photo (10) EUT Photo RF Chip Report No.: 19C0371R-RFUSP20V00 Page : 6 of 10 (11) EUT Photo (12) EUT Photo Antenna Report No.: 19C0371R-RFUSP20V00 Page : 7 of 10 (13) EUT Photo (14) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 8 of 10 (15) EUT Photo (16) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 9 of 10 (17) EUT Photo (18) EUT Photo Report No.: 19C0371R-RFUSP20V00 Page : 10 of 10 (19) EUT Photo

Report No.:19C0371R-RFUSP20V00 Page : 1 of 25 FCC Test Report Product Name FCA WL/WS PASE System MY 2021 Model No. WXMXSKIN FCC ID. M3N-WXMXSKIN Applicant Continental Automotive GmbH Address Siemensstrasse 12, 93055 Regensburg, Germany Date of Receipt Dec. 24, 2019 Issued Date Jan. 14, 2020 Report No. 19C0371R-RFUSP20V00 Report Version V1 .0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Report No.:19C0371R-RFUSP20V00 Page : 2 of 25 Test Report Issued Date: Jan. 14, 2020 Report No.: 19C0371R-RFUSP20V00 Product Name FCA WL/WS PASE System MY 2021 Applicant Continental Automotive GmbH Address Siemensstrasse 12, 93055 Regensburg, Germany Manufacturer Continental Automotive GmbH Factory sites 1) Continental Automotive Nogales S.A. de C.V. 2) Continental Automotive Guadalajara Mexico S.A. de C.V. Address 1) San Patrico #19, Nogales Sonora Mexico, Mexico 2) Camino a la Tijera No. 3, Guadalajara, Jalisco, Mexico Model No. WXMXSKIN FCC ID. M3N-WXMXSKIN EUT Rated Voltage DC 12V (Power by Battery) EUT Test Voltage DC 12V (Power by Battery) Trade Name Continental Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Senior Adm. Specialist / Jinn Chen ) Tested By : ( Senior Engineer / Bill Lin ) Approved By : ( Director / Vincent Lin ) Report No.:19C0371R-RFUSP20V00 Page : 3 of 25 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ........................................................................................................... 4 1.1. EUT Description ................................................................................................................... 4 1.2. Operational Description ........................................................................................................ 5 1.3. Test System Details ............................................................................................................... 6 1.4. Configuration of Test System ............................................................................................... 6 1.5. EUT Exercise Software ......................................................................................................... 6 1.6. Test Facility ........................................................................................................................... 7 1.7. List of Test Equipment .......................................................................................................... 8 1.8. Uncertainty ............................................................................................................................ 8 2. Conducted Emission ......................................................................................................................... 9 2.1. Test Setup .............................................................................................................................. 9 2.2. Limits .................................................................................................................................... 9 2.3. Test Procedure ..................................................................................................................... 10 2.4. Uncertainty .......................................................................................................................... 10 2.5. Test Result of Conducted Emission .................................................................................... 11 3. Radiated Emission ........................................................................................................................... 12 3.1. Test Setup ............................................................................................................................ 12 3.2. Limits .................................................................................................................................. 13 3.3. Test Procedure ..................................................................................................................... 14 3.4. Uncertainty .......................................................................................................................... 14 3.5. Test Result of Radiated Emission ....................................................................................... 15 4. EMI Reduction Method During Compliance Testing .................................................................. 25 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Report No.:19C0371R-RFUSP20V00 Page : 4 of 25 1. GENERAL INFORMATION 1.1. EUT Description Product Name FCA WL/WS PASE System MY 2021 Trade Name Continental Model No. WXMXSKIN FCC ID. M3N-WXMXSKIN Frequency Range 125 kHz Type of antenna Coil Antenna Frequency of Each Channel: Channel Frequency 1 125 kHz Note: 1. The EUT model WXMXSKIN is a vehicle start/stop switch with 125 kHz immobilizer function with built-in 125 kHz RFID transceiver. 2. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15 Subpart C Paragraph 15.209. 3. The radiation measurements are performed in X, Y, Z axis positioning. Only the worst case is shown in the report. Test Mode Mode 1: Transmit Report No.:19C0371R-RFUSP20V00 Page : 6 of 25 1.3. Test System Details The types for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 Test Fixture Continental RFHUB N/A N/A 2 Test Fixture Continental Switch Box N/A N/A 3…

Text truncated - open the document above for the full version.

Report No.: 19C0371R-RFUSP20V00 Page : 1 of 2 Attachment 1: EUT Test Setup Photographs Front View of Radiated Test Back View of Radiated Test Report No.: 19C0371R-RFUSP20V00 Page : 2 of 2 Front View of Radiated Test Back View of Radiated Test